Engineering of a Baeyer-Villiger monooxygenase to improve substrate scope, stereoselectivity and regioselectivity.

Baeyer-Villiger monooxygenases belong to a family of flavin-binding proteins that catalyze the Baeyer-Villiger (BV) oxidation of ketones to produce lactones or esters, which are important intermediates in pharmaceuticals or sustainable materials. Phenylacetone monooxygenase (PAMO) from Thermobifida fusca with moderate thermostability catalyzes the oxidation of aryl ketone substrates, but is limited by high specificity and narrow substrate scope. In the present study, we applied loop optimization by loop swapping followed by focused saturation mutagenesis in order to evolve PAMO mutants capable of catalyzing the regioselective BV oxidation of cyclohexanone and cyclobutanone derivatives with formation of either normal or abnormal esters or lactones. We further modulated PAMO to increase enantioselectivity. Crystal structure studies indicate that rotation occurs in the NADP-binding domain and that the high B-factor region is predominantly distributed in the catalytic pocket residues. Computational analyses further revealed dynamic character in the catalytic pocket and reshaped hydrogen bond interaction networks, which is more favorable for substrate binding. Our study provides useful insights for studying enzyme-substrate adaptations.

Engineering the activity and thermostability of a carboxylic acid reductase in the conversion of vanillic acid to vanillin.

Vanillin is a valuable natural product that can be used as a fragrance and additive. Recent research in the biosynthesis of vanillin has brought attention to a key enzyme, carboxylic acid reductase (CAR), which catalyzes the reduction of vanillic acid to vanillin. Nevertheless, the biosynthesis of vanillin is hampered by the low activity and stability of CAR. As such, a rational design campaign was conducted on a well-documented carboxylic acid reductase from Segniliparus rugosus (SrCAR), using vanillic acid as the model substrate. After combined active site saturation and iterative site-specific mutagenesis, the best quadruple mutant N292H/K524S/A627L/E1121W (M3) was successfully obtained. In comparison to the wildtype SrCAR, M3 demonstrated a 4.2-fold increase in catalytic efficiency (kcat/Km), and its half-life (t1/2) was enhanced by 3.8 times up to 385.08 minutes at 40 °C. In silico docking and molecular dynamics simulation provided insights into the improved activity and stability. In the subsequent preparative-scale reaction with 100 mM (16.8 g L-1) vanillic acid, the whole cell catalysis utilizing M3 produced 10.15 g·L-1 of vanillin and 1.11 g·L-1 of vanillyl alcohol, respectively. This work demonstrates a dual improvement in the activity and thermal stability of SrCAR, thereby potentially facilitating the application of carboxylic acid reductase in the biosynthesis of vanillin.

Engineering the Activity of a Newly Identified Arylalkylamine N-Acetyltransferase in the Acetylation of 5-Hydroxytryptamine.

Arylalkylamine N-acetyltransferase (AANAT) serves as a key enzyme in the biosynthesis of melatonin by transforming 5-hydroxytryptamine (5-HT) to N-acetyl-5-hydroxytryptamine (NAS), while its low activity may hinder melatonin yield. In this study, a novel AANAT derived from Sus scrofa (SsAANAT) was identified through data mining using 5-HT as a model substrate, and a rational design of SsAANAT was conducted in the quest to improving its activity. After four rounds of mutagenesis procedures, a triple combinatorial dominant mutant M3 was successfully obtained. Compared to the parent enzyme, the conversion of the whole-cell reaction bearing the best variant M3 exhibted an increase from 50 % to 99 % in the transformation of 5-HT into NAS. Additionally, its catalytic efficiency (kcat/Km) was enhanced by 2-fold while retaining the thermostability (Tm>45 °C). In the up-scaled reaction with a substrate loading of 50 mM, the whole-cell system incorporating variant M3 achieved a 99 % conversion of 5-HT in 30 h with an 80 % yield. Molecular dynamics simulations were ultilized to shed light on the origin of improved activity. This study broadens the repertoire of AANAT for the efficient biosynthesis of melatonin.

Atroposelective Synthesis of Aldehydes via Alcohol Dehydrogenase-Catalyzed Stereodivergent Desymmetrization.

Axially chiral aldehydes have emerged recently as a unique class of motifs for drug design. However, few biocatalytic strategies have been reported to construct structurally diverse atropisomeric aldehydes. Herein, we describe the characterization of alcohol dehydrogenases to catalyze atroposelective desymmetrization of the biaryl dialdehydes. Investigations into the interactions between the substrate and key residues of the enzymes revealed the distinct origin of atroposelectivity. A panel of 13 atropisomeric monoaldehydes was synthesized with moderate to high enantioselectivity (up to >99% ee) and yields (up to 99%). Further derivatization allows enhancement of the diversity and application potential of the atropisomeric compounds. This study effectively expands the scope of enzymatic synthesis of atropisomeric aldehydes and provides insights into the binding modes and recognition mechanisms of such molecules.

Biocatalytic reductive aminations with NAD(P)H-dependent enzymes: enzyme discovery, engineering and synthetic applications.

Chiral amines are pivotal building blocks for the pharmaceutical industry. Asymmetric reductive amination is one of the most efficient and atom economic methodologies for the synthesis of optically active amines. Among the various strategies available, NAD(P)H-dependent amine dehydrogenases (AmDHs) and imine reductases (IREDs) are robust enzymes that are available from various sources and capable of utilizing a broad range of substrates with high activities and stereoselectivities. AmDHs and IREDs operate via similar mechanisms, both involving a carbinolamine intermediate followed by hydride transfer from the co-factor. In addition, both groups catalyze the formation of primary and secondary amines utilizing both organic and inorganic amine donors. In this review, we discuss advances in developing AmDHs and IREDs as biocatalysts and focus on evolutionary history, substrate scope and applications of the enzymes to provide an outlook on emerging industrial biotechnologies of chiral amine production.

Active and stable alcohol dehydrogenase-assembled hydrogels via synergistic bridging of triazoles and metal ions.

Biocatalysis is increasingly replacing traditional methods of manufacturing fine chemicals due to its green, mild, and highly selective nature, but biocatalysts, such as enzymes, are generally costly, fragile, and difficult to recycle. Immobilization provides protection for the enzyme and enables its convenient reuse, which makes immobilized enzymes promising heterogeneous biocatalysts; however, their industrial applications are limited by the low specific activity and poor stability. Herein, we report a feasible strategy utilizing the synergistic bridging of triazoles and metal ions to induce the formation of porous enzyme-assembled hydrogels with increased activity. The catalytic efficiency of the prepared enzyme-assembled hydrogels toward acetophenone reduction is 6.3 times higher than that of the free enzyme, and the reusability is confirmed by the high residual catalytic activity after 12 cycles of use. A near-atomic resolution (2.1 Å) structure of the hydrogel enzyme is successfully analyzed via cryogenic electron microscopy, which indicates a structure-property relationship for the enhanced performance. In addition, the possible mechanism of gel formation is elucidated, revealing the indispensability of triazoles and metal ions, which guides the use of two other enzymes to prepare enzyme-assembled hydrogels capable of good reusability. The described strategy can pave the way for the development of practical catalytic biomaterials and immobilized biocatalysts.

Chemoenzymatic Synthesis of Sterically Hindered Biaryls by Suzuki Coupling and Vanadium Chloroperoxidase Catalyzed Halogenations.

Halogenated biaryls are vital structural skeletons in bioactive products. In this study, an effective chemoenzymatic halogenation by vanadium-dependent chloroperoxidase from Camponotus inaequalis (CiVCPO) enabled the transformation of freely rotating biaryl bonds to sterically hindered axis. The yields were up to 84 % for the tribrominated biaryl products and up to 65 % when isolated. Furthermore, a one-pot, two-step chemoenzymatic strategy by incorporating transition metal catalyzed Suzuki coupling and the chemoenzymatic halogenation in aqueous phase were described. This strategy demonstrates a simplified one-pot reaction sequence with organometallic and biocatalytic procedures under economical and environmentally beneficial conditions that may inspire further research on synthesis of sterically hindered biaryls.

Rational enzyme design for enabling biocatalytic Baldwin cyclization and asymmetric synthesis of chiral heterocycles.

Chiral heterocyclic compounds are needed for important medicinal applications. We report an in silico strategy for the biocatalytic synthesis of chiral N- and O-heterocycles via Baldwin cyclization modes of hydroxy- and amino-substituted epoxides and oxetanes using the limonene epoxide hydrolase from Rhodococcus erythropolis. This enzyme normally catalyzes hydrolysis with formation of vicinal diols. Firstly, the required shutdown of the undesired natural water-mediated ring-opening is achieved by rational mutagenesis of the active site. In silico enzyme design is then continued with generation of the improved mutants. These variants prove to be versatile catalysts for preparing chiral N- and O-heterocycles with up to 99% conversion, and enantiomeric ratios up to 99:1. Crystal structural data and computational modeling reveal that Baldwin-type cyclizations, catalyzed by the reprogrammed enzyme, are enabled by reshaping the active-site environment that directs the distal RHN and HO-substituents to be intramolecular nucleophiles.

Rational design of geranylgeranyl diphosphate synthase enhances carotenoid production and improves photosynthetic efficiency in Nicotiana tabacum.

Restricted genetic diversity can supply only a limited number of elite genes for modern plant cultivation and transgenesis. In this study, we demonstrate that rational design enables the engineering of geranylgeranyl diphosphate synthase (NtGGPPS), an enzyme of the methylerythritol phosphate pathway (MEP) in the model plant Nicotiana tabacum. As the crucial bottleneck in carotenoid biosynthesis, NtGGPPS1 interacts with phytoene synthase (NtPSY1) to channel GGPP into the production of carotenoids. Loss of this enzyme in the ntggpps1 mutant leads to decreased carotenoid accumulation. With the aim of enhancing NtGGPPS1 activity, we undertook structure-guided rational redesign of its substrate binding pocket in combination with sequence alignment. The activity of the designed NtGGPPS1 (a pentuple mutant of five sites V154A/I161L/F218Y/I209S/V233E, d-NtGGPPS1) was measured by a high-throughput colorimetric assay. d-NtGGPPS1 exhibited significantly higher conversion of IPP and each co-substrate (DMAPP ~1995.5-fold, GPP ~25.9-fold, and FPP ~16.7-fold) for GGPP synthesis compared with wild-type NtGGPPS1. Importantly, the transient and stable expression of d-NtGGPPS1 in the ntggpps1 mutant increased carotenoid levels in leaves, improved photosynthetic efficiency, and increased biomass relative to NtGGPPS1. These findings provide a firm basis for the engineering of GGPPS and will facilitate the development of quality and yield traits. Our results open the door for the structure-guided rational design of elite genes in higher plants.

A combined strategy for the overproduction of complex ergot alkaloid agroclavine.

Microbial cell factories (MCFs) and cell-free systems (CFSs) are generally considered as two unrelated approaches for the biosynthesis of biomolecules. In the current study, two systems were combined together for the overproduction of agroclavine (AC), a structurally complex ergot alkaloid. The whole biosynthetic pathway for AC was split into the early pathway and the late pathway at the point of the FAD-linked oxidoreductase EasE, which was reconstituted in an MCF (Aspergillus nidulans) and a four-enzyme CFS, respectively. The final titer of AC of this combined system is 1209 mg/L, which is the highest one that has been reported so far, to the best of our knowledge. The development of such a combined route could potentially avoid the limitations of both MCF and CFS systems, and boost the production of complex ergot alkaloids with polycyclic ring systems.

Photobiocatalytic Decarboxylation for the Synthesis of Fatty Epoxides from Renewable Fatty Acids.

Fatty epoxides are unique building blocks in organic transformations and materials production; however, their synthetic methodologies are currently not accessible from renewable fatty acids. Herein, a photoenzymatic decarboxylation of epoxy fatty acids into fatty epoxides was demonstrated using fatty acid photodecarboxylase (FAP) from Chlorella variabilis NC64A (CvFAP). Various fatty epoxides were synthesized in excellent selectivity by wild-type CvFAP. The decarboxylation reaction was also achieved with four new FAP homologues, potentially suggesting a broad availability of the biocatalysts for this challenging decarboxylation reaction. By combining CvFAP with lipase and peroxygenase, a multienzymatic cascade to transform oleic acid and its triglyceride into the corresponding fatty epoxides was established. The obtained fatty epoxides were further converted into rather unusual fatty compounds including diol, alcohol, ether, and chain-shortened carboxylic acids. The present photobiocatalytic synthesis of fatty epoxides from natural starting materials excels by its intrinsic selectivity, mild conditions, and independence of nicotinamide cofactors.

Synthesis of Enantioenriched Sulfoxides by an Oxidation-Reduction Enzymatic Cascade.

Chiral sulfoxides are versatile synthons and have gained a particular interest in asymmetric synthesis of active pharmaceutical and agrochemical ingredients. Herein, a linear oxidation-reduction bienzymatic cascade to synthesize chiral sulfoxides is reported. The extraordinarily stable and active vanadium-dependent chloroperoxidase from Curvularia inaequalis (CiVCPO) was used to oxidize sulfides into racemic sulfoxides, which were then converted to chiral sulfoxides by highly enantioselective methionine sulfoxide reductase A (MsrA) and B (MsrB) by kinetic resolution, respectively. The combinatorial cascade gave a broad range of structurally diverse sulfoxides with excellent optical purity (>99 %  ee) with complementary chirality. The enzymatic cascade requires no NAD(P)H recycling, representing a facile method for chiral sulfoxide synthesis. Particularly, the envisioned enzymatic cascade not only allows CiVCPO to gain relevance in chiral sulfoxide synthesis, but also provides a powerful approach for (S)-sulfoxide synthesis; the latter case is significantly unexplored for heme-dependent peroxidases and peroxygenases.

A Biocatalytic Platform for the Synthesis of Enantiopure Propargylic Alcohols and Amines.

Propargylic alcohols and amines are versatile building blocks in organic synthesis. We demonstrate a straightforward enzymatic cascade to synthesize enantiomerically pure propargylic alcohols and amines from readily available racemic starting materials. In the first step, the peroxygenase from Agrocybe aegerita converted the racemic propargylic alcohols into the corresponding ketones, which then were converted into the enantiomerically pure alcohols using the (R)-selective alcohol dehydrogenase from Lactobacillus kefir or the (S)-selective alcohol dehydrogenase from Thermoanaerobacter brokii. Moreover, an enzymatic Mitsunobu-type conversion of the racemic alcohols into enantiomerically enriched propargylic amines using (R)-selective amine transaminase from Aspergillus terreus or (S)-selective amine transaminase from Chromobacterium violaceum was established. The one-pot two-step cascade reaction yielded a broad range of enantioenriched alcohol and amine products in 70-99% yield.

Peroxygenase-Catalyzed Selective Synthesis of Calcitriol Starting from Alfacalcidol.

Calcitriol is an active analog of vitamin D3 and has excellent physiological activities in regulating healthy immune function. To synthesize the calcitriol compound, the concept of total synthesis is often adopted, which typically involves multiple steps and results in an overall low yield. Herein, we envisioned an enzymatic approach for the synthesis of calcitriol. Peroxygenase from Agrocybe aegerita (AaeUPO) was used as a catalyst to hydroxylate the C-H bond at the C-25 position of alfacalcidol and yielded the calcitriol in a single step. The enzymatic reaction yielded 80.3% product formation in excellent selectivity, with a turnover number up to 4000. In a semi-preparative scale synthesis, 72% isolated yield was obtained. It was also found that AaeUPO is capable of hydroxylating the C-H bond at the C-1 position of vitamin D3, thereby enabling the calcitriol synthesis directly from vitamin D3.

Engineering of a thermophilic dihydroxy-acid dehydratase toward glycerate dehydration for in vitro biosystems.

Dihydroxy-acid dehydratase (DHAD) plays an important role in the utilization of glycerol or glucose for the production of value-added chemicals in the in vitro synthetic enzymatic biosystem. The low activity of DHAD in the dehydration of glycerate to pyruvate hampers its applications in biosystems. Protein engineering of a thermophilic DHAD from Sulfolobus solfataricus (SsDHAD) was performed to increase its dehydration activity. A triple mutant (I161M/Y145S/G205K) with a 10-fold higher activity on glycerate dehydration was obtained after three rounds of iterative saturation mutagenesis (ISM) based on computational analysis. The shrunken substrate-binding pocket and newly formed hydrogen bonds were the reason for the activity improvement of the mutant. For the in vitro synthetic enzymatic biosystems of converting glucose or glycerol to L-lactate, the biosystems with the mutant SsDHAD showed 3.32- and 2.34-fold higher reaction rates than the wild type, respectively. This study demonstrates the potential of protein engineering to improve the efficiency of in vitro synthetic enzymatic biosystems by enhancing the enzyme activity of rate-limited enzymes. KEY POINTS: • A screening method was established for the protein engineering of SsDHAD. • A R3 mutant of SsDHAD with 10-fold higher activity was obtained. • The R3 mutant exhibits higher productivity in the in vitro biosystems.

[Substitutability of metal-binding sites in an alcohol dehydrogenase].

Covalently anchoring of a ligand/metal via polar amino acid side chain(s) is often observed in metalloenzyme, while the substitutability of metal-binding sites remains elusive. In this study, we utilized a zinc-dependent alcohol dehydrogenase from Thermoanaerobacter brockii (TbSADH) as a model enzyme, analyzed the sequence conservation of the three residues Cys37, His59, and Asp150 that bind the zinc ion, and constructed the mutant library. After experimental validation, three out of 224 clones, which showed comparative conversion and ee values as the wild-type enzyme in the asymmetric reduction of the model substrate tetrahydrofuran-3-one, were screened out. The results reveal that the metal-binding sites in TbSADH are substitutable without tradeoff in activity and stereoselectivity, which lay a foundation for designing ADH-catalyzed new reactions via metal ion replacement.

Whole-Cell Biotransformation of Penicillin G by a Three-Enzyme Co-expression System with Engineered Deacetoxycephalosporin†C Synthase.

Deacetoxycephalosporin C synthase (DAOCS) catalyzes the transformation of penicillin G to phenylacetyl-7-aminodeacetoxycephalosporanic acid (G-7-ADCA) for which it depends on 2-oxoglutarate (2OG) as co-substrate. However, the low activity of DAOCS and the expense of 2OG restricts its practical applications in the production of G-7-ADCA. Herein, a rational design campaign was performed on a DAOCS from Streptomyces clavuligerus (scDAOCS) in the quest to construct novel expandases. The resulting mutants showed 25∼58 % increase in activity compared to the template. The dominant DAOCS variants were then embedded into a three-enzyme co-expression system, consisting of a catalase and an L-glutamic oxidase for the generation of 2OG, to convert penicillin G to G-7-ADCA in E. coli. The engineered whole-cell enzyme cascade was applied to an up-scaled reaction, exhibiting a yield of G-7-ADCA up to 39.21 mM (14.6 g ⋅ L-1 ) with a conversion of 78.42 mol %. This work highlights the potential of the integrated whole-cell system that may inspire further research on green and efficient production of 7-ADCA.

Biosynthesis of ß-lactam nuclei in yeast.

We have engineered brewer's yeast as a general platform for de novo synthesis of diverse ß-lactam nuclei starting from simple sugars, thereby enabling ready access to a number of structurally different antibiotics of significant pharmaceutical importance. The biosynthesis of ß-lactam nuclei has received much attention in recent years, while rational engineering of non-native antibiotics-producing microbes to produce ß-lactam nuclei remains challenging. Benefited by the integration of heterologous biosynthetic pathways and rationally designed enzymes that catalyze hydrolysis and ring expansion reactions, we succeeded in constructing synthetic yeast cell factories which produce antibiotic cephalosporin C (CPC, 170.1 ± 4.9 µg/g DCW) and the downstream ß-lactam nuclei, including 6-amino penicillanic acid (6-APA, 5.3 ± 0.2 mg/g DCW), 7-amino cephalosporanic acid (7-ACA, 6.2 ± 1.1 µg/g DCW) as well as 7-amino desacetoxy cephalosporanic acid (7-ADCA, 1.7 ± 0.1 mg/g DCW). This work established a Saccharomyces cerevisiae platform capable of synthesizing multiple ß-lactam nuclei by combining natural and artificial enzymes, which serves as a metabolic tool to produce valuable ß-lactam intermediates and new antibiotics.

Tuning an Imine Reductase for the Asymmetric Synthesis of Azacycloalkylamines by Concise Structure-Guided Engineering.

Although imine reductases (IREDs) are emerging as attractive reductive aminases (RedAms), their substrate scope is still narrow, and rational engineering is rare. Focusing on hydrogen bond reorganization and cavity expansion, a concise strategy combining rational cavity design, combinatorial active-site saturation test (CAST), and thermostability engineering was designed, that transformed the weakly active IR-G36 into a variant M5 with superior performance for the synthesis of (R)-3-benzylamino-1-Boc-piperidine, with a 4193-fold improvement in catalytic efficiency, a 16.2 °C improvement in Tm , and a significant increase in the e.e. value from 78 % (R) to >99 % (R). M5 exhibits broad substrate scope for the synthesis of diverse azacycloalkylamines, and the reaction was demonstrated on a hectogram-scale under industrially relevant conditions. Our study provides a compelling example of the preparation of versatile and efficient IREDs, with exciting opportunities in medicinal and process chemistry as well as synthetic biology.

[Rational design and applications of industrial proteins].

As one of the underlying core technologies in the fields of synthetic biology and green bio-manufacturing, rational protein design is able to effectively solve generic challenges, e.g., improving insufficient performance of natural enzymes, and creating high-performance artificial enzymes. On the occasion of the 10th anniversary of the founding of the Tianjin Institute of Industrial Biotechnology (TIB), Chinese Academy of Sciences, this paper reviews the important progress of TIB achieved in rational design of industrial proteins, from the development of enzyme design methodology, the design of new enzyme reactions, to the applications of biocatalysis, and prospects future trends of this field. It is hoped that this will build a bridge between academia and industry on the rational design of enzymes, promote the development and application of new technologies and strategies. This will help merging the basic research and industrial application, thereby advancing the bio-manufacturing technological innovation.