PFOS dominates PFAS composition in ambient fine particulate matter (PM2.5) collected across North Carolina nearly 20 years after the end of its US production.

Contamination of drinking water by per- and polyfluoroalkyl substances (PFASs) emitted from manufacturing plants, fire-fighting foams, and urban waste streams has received considerable attention due to concerns over toxicity and environmental persistence; however, PFASs in ambient air remain poorly understood, especially in the United States (US). We measured PFAS concentrations in ambient fine particulate matter (PM2.5) at 5 locations across North Carolina over a 1 year period in 2019. Thirty-four PFASs, including perfluoroalkyl carboxylic, perfluoroalkane sulfonic, perfluoroalkyl ether carboxylic and sulfonic acids were analyzed by UHPLC/ESI-MS/MS. Quarterly averaged concentrations ranged from <0.004-14.1 pg m-3. Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) ranged from <0.18 to 14.1 pg m-3, comparable to previous PM2.5 measurements from Canada and Europe (<0.02-3.5 pg m-3). Concentrations above 1 pg m-3 were observed in July-September at Charlotte (14.1 pg m-3, PFOA), Wilmington (4.75 pg m-3, PFOS), and Research Triangle Park (1.37 pg m-3, PFOS). Notably, PM2.5 has a short atmospheric lifetime (<2 weeks), and thus, the presence of PFOS in these samples raises questions about their sources, since PFOS production was phased out in the US ∼20 years ago. This is the first US study to provide insights into ambient PFAS concentrations in PM2.5.

Decrease in sulfate aerosol light backscattering by reactive uptake of isoprene epoxydiols.

Sulfate aerosol is responsible for a net cooling of the Earth's atmosphere due to its ability to backscatter light. Through atmospheric multiphase chemistry, it reacts with isoprene epoxydiols leading to the formation of aerosol and organic compounds, including organosulfates and high-molecular weight compounds. In this study, we evaluate how sulfate aerosol light backscattering is modified in the presence of such organic compounds. Our laboratory experiments show that reactive uptake of isoprene epoxydiols on sulfate aerosol is responsible for a decrease in light backscattering compared to pure inorganic sulfate particles of up to - 12% at 355 nm wavelength and - 21% at 532 nm wavelength. Moreover, while such chemistry is known to yield a core-shell structure, the observed reduction in the backscattered light intensity is discussed with Mie core-shell light backscattering numerical simulations. We showed that the observed decrease can only be explained by considering effects from the complex optical refractive index. Since isoprene is the most abundant hydrocarbon emitted into the atmosphere, and isoprene epoxydiols are the most important isoprene secondary organic aerosol precursors, our laboratory findings can aid in quantifying the direct radiative forcing of sulfates in the presence of organic compounds, thus more clearly resolving the impact of such aerosol particles on the Earth's climate.

Understanding the Early Biological Effects of Isoprene-Derived Particulate Matter Enhanced by Anthropogenic Pollutants.

INTRODUCTION: Airborne fine particulate matter (PM2.5; particulate matter ≤ 2.5 µm in aerodynamic diameter) plays a key role in air quality, climate, and public health. Globally, the largest mass fraction of PM2.5 is organic, dominated by secondary organic aerosol (SOA) formed from atmospheric oxidation of volatile organic compounds (VOCs). Isoprene from vegetation is the most abundant nonmethane VOC emitted into Earth's atmosphere. Isoprene has been recently recognized as one of the major sources of global SOA production that is enhanced by the presence of anthropogenic pollutants, such as acidic sulfate derived from sulfur dioxide (SO2), through multiphase chemistry of its oxidation products. Considering the abundance of isoprene-derived SOA in the atmosphere, understanding mechanisms of adverse health effects through inhalation exposure is critical to mitigating its potential impact on public health. Although previous studies have examined the toxicological effects of certain isoprene-derived gas-phase oxidation products, to date, no systematic studies have examined the potential toxicological effects of isoprene-derived SOA, its constituents, or its SOA precursors on human lung cells. SPECIFIC AIMS: The overall objective of this study was to investigate the early biological effects of isoprene-derived SOA and its subtypes on BEAS-2B cells (a human bronchial epithelial cell line), with a particular focus on the alteration of oxidative stress- and inflammation-related genes. To achieve this objective, there were two specific aims.1. Examine toxicity and early biological effects of SOA derived from the photochemical oxidation of isoprene, considering both urban and downwind-urban types of chemistry.2. Examine toxicity and early biological effects of SOA derived directly from downstream oxidation products of isoprene (i.e., epoxides and hydroperoxides). METHODS: Isoprene-derived SOA was first generated by photooxidation of isoprene under natural sunlight in the presence of nitric oxide (NO) and acidified sulfate aerosols. Experiments were conducted in a 120-m3 outdoor Teflon-film chamber located on the roof of the Gillings School of Global Public Health, University of North Carolina at Chapel Hill (UNC-Chapel Hill). BEAS-2B cells were exposed to chamber- generated isoprene-derived SOA using the Electrostatic Aerosol in Vitro Exposure System (EAVES). This approach allowed us to generate atmospherically relevant compositions of isoprene-derived SOA and to examine its toxicity through in vitro exposures at an air-liquid interface, providing a more biologically relevant exposure model. Isoprene-derived SOA samples were also collected, concurrently with EAVES sampling, onto Teflon membrane filters for in vitro resuspension exposures and for analysis of aerosol chemical composition by gas chromatography/electron ionization-quadrupole mass spectrometry (GC/EI-MS) with prior trimethylsilylation and ultra-performance liquid-chromatography coupled to high-resolution quadrupole time-of-flight mass spectrometry equipped with electrospray ionization (UPLC/ESI-HR-QTOFMS). Isoprene-derived SOA samples were also analyzed by the dithiothreitol (DTT) assay in order to characterize their reactive oxygen species (ROS)-generation potential.Organic synthesis of known isoprene-derived SOA precursors, which included isoprene epoxydiols (IEPOX), methacrylic acid epoxide (MAE), and isoprene-derived hydroxyhydroperoxides (ISOPOOH), was conducted in order to isolate major isoprene-derived SOA formation pathways from each other and to determine which of these pathways (or SOA types) is potentially more toxic. Since IEPOX and MAE produce SOA through multiphase chemistry onto acidic sulfate aerosol, dark reactive uptake experiments of IEPOX and MAE in the presence of acidic sulfate aerosol were performed in a 10-m3 flexible Teflon indoor chamber at UNC-Chapel Hill. Since the generation of SOA from ISOPOOH (through a non-IEPOX route) requires a hydroxyl radical (•OH)-initiated oxidation, ozonolysis of tetramethylethylene (TME) was used to form the needed •OH radicals in the indoor chamber. The resultant low-volatility multifunctional hydroperoxides condensed onto nonacidified sulfate aerosol, yielding the ISOPOOH-derived SOA needed for exposures. Similar to the outdoor chamber SOAs, IEPOX, MAE- and ISOPOOH-derived SOAs were collected onto Teflon membrane filters and were subsequently chemically characterized by GC/EI-MS and UPLC/ESI-HR-QTOFMS as well as for ROS-generation potential using the DTT assay. These filters were also used for resuspension in vitro exposures.By conducting gene expression profiling, we provided mechanistic insights into the potential health effects of isoprene-derived SOA. First, gene expression profiling of 84 oxidative stress- and 249 inflammation-associated human genes was performed for cells exposed to isoprene-derived SOA generated in our outdoor chamber experiments in EAVES or by resuspension. Two pathway-focused panels were utilized for this purpose: (1) nCounter GX Human Inflammation Kit comprised of 249 human genes (NanoString), and (2) Human Oxidative Stress Plus RT2 Profiler PCR Array (Qiagen) comprised of 84 oxidative stress-associated genes. We compared the gene expression levels in cells exposed to SOA generated in an outdoor chamber from photochemical oxidation of isoprene in the presence of NO and acidified sulfate seed aerosol to cells exposed to a dark control mixture of isoprene, NO, and acidified sulfate seed aerosol to isolate the effects of the isoprene-derived SOA on the cells using the EAVES and resuspension exposure methods. Pathway-based analysis was performed for significantly altered genes using the ConsensusPathDB database, which is a database system for the integration of human gene functional interactions to provide biological pathway information for a gene set of interest. Pathway annotation was performed to provide biological pathway information for each gene set. The gene-gene interaction networks were constructed and visualized using the GeneMANIA Cytoscape app (version 3.4.1) to predict the putative function of altered genes. Lastly, isoprene-derived SOA collected onto filters was used in resuspension exposures to measure select inflammatory biomarkers, including interleukin 8 (IL-8) and prostaglandin-endoperoxide synthase 2 (PTGS2) genes, in BEAS-2B cells to ensure that effects observed from EAVES exposures were attributable to particle-phase organic products. Since EAVES and resuspension exposures compared well, gene expression profiling for IEPOX-, MAE- and ISOPOOH-derived SOA were conducted using only resuspension exposures. RESULTS AND CONCLUSIONS: Chemical characterization coupled with biological analyses show that atmospherically relevant compositions of isoprene-derived SOA alter the levels of 41 oxidative stress-related genes. Of the different composition types of isoprene-derived SOA, MAE- and ISOPOOH-derived SOA altered the greatest number of genes, suggesting that carbonyl and hydroperoxide functional groups are oxidative stress promoters. Taken together, the different composition types accounted for 34 of the genes altered by the total isoprene-derived SOA mixture, while 7 remained unique to the total mixture exposures, indicating that there is either a synergistic effect of the different isoprene-derived SOA components or an unaccounted component in the mixture.The high-oxides of nitrogen (NOx) regime, which yielded MAE- and methacrolein (MACR)-derived SOA, had a higher ROS-generation potential (as measured by the DTT assay) than the low- NOx regime, which included IEPOX- and isoprene-derived SOA. However, ISOPOOH-derived SOA, which also formed in the low- NOx regime, had the highest ROS-generation potential, similar to 1,4-naphthoquinone (1,4-NQ). This suggests that aerosol-phase organic peroxides contribute significantly to particulate matter (PM) oxidative potential. MAE- and MACR- derived SOA showed equal or greater ROS-generation potential than was reported in prior UNC-Chapel Hill studies on diesel exhaust PM, highlighting the importance of a comprehensive investigation of the toxicity of isoprene-derived SOA. Notably, ISOPOOH-derived SOA was one order of magnitude higher in ROS-generation potential than diesel exhaust particles previously examined at UNC-Chapel Hill. As an acellular assay, the DTT assay may not be predictive of oxidative stress; therefore, we also focused on the gene expression results from the cellular exposures.We have demonstrated that the nuclear factor (erythroid-derived 2)-like 2 (Nrf2) and the redox-sensitive activation protein-1 (AP-1) transcription factor networks have been significantly altered upon exposure to isoprene-derived SOA. The identification of Nrf2 pathway in cells exposed to isoprene-derived SOA is in accordance with our findings using the DTT assay, which measures the thiol reactivity of PM samples as a surrogate for their ROS-generation potential. Specifically, our results point to the cysteine-thiol modifications within cells that lead to activation of Nrf2-related gene expression.However, based on our gene expression results showing no clear relationship between DTT activity and the number of altered oxidative stress-related genes, the DTT activity of isoprene-derived SOA may not be directly indicative of toxicity relative to other SOA types. While activation of Nrf2-associated genes has been identified with responses to oxidative stress and linked to traffic related air pollution exposure in both toxicological and epidemiological studies, their implicit involvement in this study suggests that activation of Nrf2-related gene expression may occur with exposures to all sorts of PM types.By controlling the exposure time, method, and dose we demonstrated that among the SOA derived from previously identified individual precursors of isoprene-derived SOA, ISOPOOH-derived SOA alters moreoxidative stress related genes than does IEPOX-derived SOA, but fewer than MAE-derived SOA. This suggests that the composition of MAE-derived SOA may be the greatest contributor to alterations of oxidative stress-related gene expression observed due to isoprene-derived SOA exposure. Further study on induced levels of protein expression and specific toxicological endpoints is necessary to determine if the observed gene expression changes lead to adverse health effects. In addition, such studies have implications for pollution-control strategies because NOx and SO2 are controllable pollutants that can alter the composition of SOA, and in turn alter its effects on gene expression. The mass fraction of different components of atmospheric isoprene derived SOA should be considered, but altering the fraction of high- NOx isoprene-derived SOA (e.g., MAE derived SOA) may yield greater changes in gene expression than altering the fraction of low- NOx isoprene derived SOA types (ISOPOOH- or IEPOX-derived SOA). Finally, this study confirms that total isoprene-derived SOA alters the expression of a greater number of genes than does SOA derived from the tested precursors. This warrants further work to determine the underlying explanation for this observation, which may be uncharacterized components of isoprene-derived SOA or the potential for synergism between the studied components.

Molecular Composition and Volatility of Organic Aerosol in the Southeastern U.S.: Implications for IEPOX Derived SOA.

We present measurements as part of the Southern Oxidant and Aerosol Study (SOAS) during which atmospheric aerosol particles were comprehensively characterized. We present results utilizing a Filter Inlet for Gases and AEROsol coupled to a chemical ionization mass spectrometer (CIMS). We focus on the volatility and composition of isoprene derived organic aerosol tracers and of the bulk organic aerosol. By utilizing the online volatility and molecular composition information provided by the FIGAERO-CIMS, we show that the vast majority of commonly reported molecular tracers of isoprene epoxydiol (IEPOX) derived secondary organic aerosol (SOA) is derived from thermal decomposition of accretion products or other low volatility organics having effective saturation vapor concentrations <10(-3) µg m(-3). In addition, while accounting for up to 30% of total submicrometer organic aerosol mass, the IEPOX-derived SOA has a higher volatility than the remaining bulk. That IEPOX-SOA, and more generally bulk organic aerosol in the Southeastern U.S. is comprised of effectively nonvolatile material has important implications for modeling SOA derived from isoprene, and for mechanistic interpretations of molecular tracer measurements. Our results show that partitioning theory performs well for 2-methyltetrols, once accretion product decomposition is taken into account. No significant partitioning delays due to aerosol phase or viscosity are observed, and no partitioning to particle-phase water or other unexplained mechanisms are needed to explain our results.

On the origin of water-soluble organic tracer compounds in fine aerosols in two cities: the case of Los Angeles and Barcelona.

Water-soluble organic compounds (WSOCs), represented by anhydro-saccharides, dicarboxylic acids, and polyols, were analyzed by gas chromatography interfaced to mass spectrometry in extracts from 103 PM1 and 22 PM2.5 filter samples collected in an urban background and road site in Barcelona (Spain) and an urban background site in Los Angeles (USA), respectively, during 1-month intensive sampling campaigns in 2010. Both locations have similar Mediterranean climates, with relatively high solar radiation and frequent anti-cyclonic conditions, and are influenced by a complex mixture of emission sources. Multivariate curve resolution-alternating least squares analyses were applied on the database in order to resolve differences and similarities in WSOC compositions in the studied sites. Five consistent clusters for the analyzed compounds were obtained, representing primary regional biomass burning organic carbon, three secondary organic components (aged SOC, isoprene SOC, and α-pinene SOC), and a less clear component, called urban oxygenated organic carbon. This last component is probably influenced by in situ urban activities, such as food cooking and traffic emissions and oxidation processes.

Response of an aerosol mass spectrometer to organonitrates and organosulfates and implications for atmospheric chemistry.

Organonitrates (ON) are important products of gas-phase oxidation of volatile organic compounds in the troposphere; some models predict, and laboratory studies show, the formation of large, multifunctional ON with vapor pressures low enough to partition to the particle phase. Organosulfates (OS) have also been recently detected in secondary organic aerosol. Despite their potential importance, ON and OS remain a nearly unexplored aspect of atmospheric chemistry because few studies have quantified particulate ON or OS in ambient air. We report the response of a high-resolution time-of-flight aerosol mass spectrometer (AMS) to aerosol ON and OS standards and mixtures. We quantify the potentially substantial underestimation of organic aerosol O/C, commonly used as a metric for aging, and N/C. Most of the ON-nitrogen appears as NO(x)+ ions in the AMS, which are typically dominated by inorganic nitrate. Minor organonitrogen ions are observed although their identity and intensity vary between standards. We evaluate the potential for using NO(x)+ fragment ratios, organonitrogen ions, HNO(3)+ ions, the ammonium balance of the nominally inorganic ions, and comparison to ion-chromatography instruments to constrain the concentrations of ON for ambient datasets, and apply these techniques to a field study in Riverside, CA. OS manifests as separate organic and sulfate components in the AMS with minimal organosulfur fragments and little difference in fragmentation from inorganic sulfate. The low thermal stability of ON and OS likely causes similar detection difficulties for other aerosol mass spectrometers using vaporization and/or ionization techniques with similar or larger energy, which has likely led to an underappreciation of these species.

Chemical composition of gas- and aerosol-phase products from the photooxidation of naphthalene.

The current work focuses on the detailed evolution of the chemical composition of both the gas- and aerosol-phase constituents produced from the OH-initiated photooxidation of naphthalene under low- and high-NO(x) conditions. Under high-NO(x) conditions ring-opening products are the primary gas-phase products, suggesting that the mechanism involves dissociation of alkoxy radicals (RO) formed through an RO(2) + NO pathway, or a bicyclic peroxy mechanism. In contrast to the high-NO(x) chemistry, ring-retaining compounds appear to dominate the low-NO(x) gas-phase products owing to the RO(2) + HO(2) pathway. We are able to chemically characterize 53-68% of the secondary organic aerosol (SOA) mass. Atomic oxygen-to-carbon (O/C), hydrogen-to-carbon (H/C), and nitrogen-to-carbon (N/C) ratios measured in bulk samples by high-resolution electrospray ionization time-of-flight mass spectrometry (HR-ESI-TOFMS) are the same as the ratios observed with online high-resolution time-of-flight aerosol mass spectrometry (HR-ToF-AMS), suggesting that the chemical compositions and oxidation levels found in the chemically-characterized fraction of the particle phase are representative of the bulk aerosol. Oligomers, organosulfates (R-OSO(3)), and other high-molecular-weight (MW) products are not observed in either the low- or high-NO(x) SOA; however, in the presence of neutral ammonium sulfate seed aerosol, an organic sulfonic acid (R-SO(3)), characterized as hydroxybenzene sulfonic acid, is observed in naphthalene SOA produced under both high- and low-NO(x) conditions. Acidic compounds and organic peroxides are found to account for a large fraction of the chemically characterized high- and low-NO(x) SOA. We propose that the major gas- and aerosol-phase products observed are generated through the formation and further reaction of 2-formylcinnamaldehyde or a bicyclic peroxy intermediate. The chemical similarity between the laboratory SOA and ambient aerosol collected from Birmingham, Alabama (AL) and Pasadena, California (CA) confirm the importance of PAH oxidation in the formation of aerosol within the urban atmosphere.