Critical Sensing Modalities for Hydrogen: Technical Needs and Status of the Field to Support a Changing Energy Landscape.

Decarbonization of the energy system is a key aspect of the energy transition. Energy storage in the form of chemical bonds has long been viewed as an optimal scheme for energy conversion. With advances in systems engineering, hydrogen has the potential to become a low cost, low emission, energy carrier. However, hydrogen is difficult to contain, it exhibits a low flammability limit (>40000 ppm or 4%), low ignition energy (0.02 mJ), and it is a short-lived climate forcer. Beyond commercially available sensors to ensure safety through spot checks in enclosed environments, new sensors are necessary to support the development of low emission infrastructure for production, transmission, storage, and end use. Efficient scalable broad area hydrogen monitoring motivates lowering the detection limit below that (10 ppm) of best in class commercial technologies. In this perspective, we evaluate recent advances in hydrogen gas sensing to highlight technologies that may find broad utility in the hydrogen sector. It is clear in the near term that a sensor technology suite is required to meet the variable constraints (e.g., power, size/weight, connectivity, cost) that characterize the breadth of the application space, ranging from industrial complexes to remote pipelines. This perspective is not intended to be another standard hydrogen sensor review, but rather provide a critical evaluation of technologies with detection limits preferably below 1 ppm and low power requirements. Given projections for rapid market growth, promising techniques will also be amenable to rapid development in technical readiness for commercial deployment. As such, methods that do not meet these requirements will not be considered in depth.

Resistivity detection of perfluoroalkyl substances with fluorous polyaniline in an electrical lateral flow sensor.

Perfluoroalkyl substances (PFAS), known as "forever chemicals," are a growing concern in the sphere of human and environmental health. In response, rapid, reproducible, and inexpensive methods for PFAS detection in the environment and home water supplies are needed. We have developed a simple and inexpensive perfluoroalkyl acid detection method based on an electrically read lateral flow assay (e-LFA). Our method employs a fluorous surfactant formulation with undoped polyaniline (F-PANI) fabricated to create test lines for the lateral flow assay. In perfluoroalkyl acid sensing studies, an increase in conductivity of the F-PANI film is caused by acidification and doping of PANI. A conductivity enhancement by 104-fold can be produced by this method, and we demonstrate a limit of detection for perfluorooctanoic acid (PFOA) of 400 ppt and perfluorobutanoic acid of 200 ppt. This method for PFOA detection can be expanded for wide-scale environmental and at-home water testing.

Highly Contorted Rigid Nitrogen-Rich Nanographene with Four Heptagons.

Nucleophilic substitution of 9,10-dichlorooctafluoroanthracene with 3,4-diethylpyrrole and subsequent Scholl reaction give the annularly fused decapyrrollyl anthracene. Single crystal X-ray analysis revealed a highly contorted geometry induced by a combination of adjacent heptagons, forming a unique 7-7-6-7-7 topology. The end-to-end twist angle along the acene moiety is 90°. Cyclic voltammetry studies reveal 6-electron oxidation waves. Density functional theory calculations provided further insights into the aromaticity and electronic properties of this highly twisted, nitrogen-rich nanographene. The structural rigidity and high racemization energy barrier have been studied theoretically and experimentally by VT-NMR.

Flexible Phenanthracene Nanotubes for Explosive Detection.

Phenanthracene nanotubes with arylene-ethynylene-butadiynylene rims and phenanthracene walls are synthesized in a modular bottom-up approach. One of the rims carries hexadecyloxy side chains, mediating the affinity to highly oriented pyrolytic graphite. Molecular dynamics simulations show that the nanotubes are much more flexible than their structural formulas suggest: In 12, the phenanthracene units act as hinges that flip the two macrocycles relative to each other to one of two possible sites, as quantum mechanical models suggest and scanning tunneling microscopy investigations prove. Unexpectedly, both theory and experiment show for 13 that the three phenanthracene hinges are deflected from the upright position, accompanied by a deformation of both macrocycles from their idealized sturdy macroporous geometry. This flexibility together with their affinity to carbon-rich substrates allows for an efficient host-guest chemistry at the solid/gas interface opening the potential for applications in single-walled carbon nanotube-based sensing, and the applicability to build new sensors for the detection of 2,4,6-trinitrotoluene via nitroaromatic markers is shown.

A Microporous Poly(Arylene Ether) Platform for Membrane-Based Gas Separation.

Membrane-based gas separations are crucial for an energy-efficient future. However, it is difficult to develop membrane materials that are high-performing, scalable, and processable. Microporous organic polymers (MOPs) combine benefits for gas sieving and solution processability. Herein, we report membrane performance for a new family of microporous poly(arylene ether)s (PAEs) synthesized via Pd-catalyzed C-O coupling reactions. The scaffold of these microporous polymers consists of rigid three-dimensional triptycene and stereocontorted spirobifluorene, endowing these polymers with micropore dimensions attractive for gas separations. This robust PAE synthesis method allows for the facile incorporation of functionalities and branched linkers for control of permeation and mechanical properties. A solution-processable branched polymer was formed into a submicron film and characterized for permeance and selectivity, revealing lab data that rivals property sets of commercially available membranes already optimized for much thinner configurations. Moreover, the branching motif endows these materials with outstanding plasticization resistance, and their microporous structure and stability enables benefits from competitive sorption, increasing CO2 /CH4 and (H2 S+CO2 )/CH4 selectivity in mixture tests as predicted by the dual-mode sorption model. The structural tunability, stability, and ease-of-processing suggest that this new platform of microporous polymers provides generalizable design strategies to form MOPs at scale for demanding gas separations in industry.

Wireless Detection of Trace Ammonia: A Chronic Kidney Disease Biomarker.

Elevated levels of ammonia in breath can be linked to medical complications, such as chronic kidney disease (CKD), that disturb the urea balance in the body. However, early stage CKD is usually asymptomatic, and mass screening is hindered by high instrumentation and operation requirements and accessible and reliable detection methods for CKD biomarkers, such as trace ammonia in breath. Enabling methods would have significance in population screening for early stage CKD patients. We herein report a method to effectively immobilize transition metal selectors in close proximity to a single-walled carbon nanotube (SWCNT) surface using pentiptycene polymers containing metal-chelating backbone structures. The robust and modular nature of the pentiptycene metallopolymer/SWCNT complexes creates a platform that accelerates sensor discovery and optimization. Using these methods, we have identified sensitive, selective, and robust copper-based chemiresistive ammonia sensors that display low parts per billion detection limits. We have added these hybrid materials to the resonant radio frequency circuits of commercial near-field communication (NFC) tags to achieve robust wireless detection of ammonia at physiologically relevant levels. The integrated devices offer a noninvasive and cost-effective approach for early detection and monitoring of CKD.

Leveraging a smartphone to perform time-gated luminescence measurements.

Empowered by advanced on-board sensors, high-performance optics packages and ever-increasing computational power, smartphones have democratized data generation, collection, and analysis. Building on this capacity, many platforms have been developed to enable its use as an optical sensing platform for colorimetric and fluorescence measurements. In this paper, we report the ability to enable a smartphone to perform laboratory quality time-resolved analysis of luminescent samples via the exploitation of the rolling shutter mechanism of the native CMOS imager. We achieve this by leveraging the smartphone's standard image capture applications, commercially available image analysis software, and housing the device within a UV-LED containing case. These low-cost modifications enable us to demonstrate the smartphone's analytical potential by performing tasks ranging from authentication and encryption to the interrogation of packaging, compounds, and physical phenomena. This approach underscores the power of repurposing existing technologies to extend the reach and inclusivity of scientific exploration, opening new avenues for data collection and analysis.

Detection of Per- and Polyfluoroalkyl Substances (PFAS) by Interrupted Energy Transfer.

The ubiquitous presence of per- and polyfluoroalkyl substances (PFAS) in aqueous environments has aroused societal concern. Nonetheless, effective sensing technologies for continuous monitoring of PFAS within water distribution infrastructures currently do not exist. Herein, we describe a ratiometric sensing approach to selectively detect aqueous perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) at concentrations of µg ⋅ L-1 . Our method relies on the excitonic transport in a highly fluorinated poly(p-phenylene ethynylene) to amplify a ratiometric emission signal modulated by an embedded fluorinated squaraine dye. The electronic coupling between the polymer and dye occurs through overlap of π-orbitals and is designed such that energy transfer is dominated by an electron-exchange (Dexter) mechanism. Exposure to aqueous solutions of PFAS perturbs the orbital interactions between the squaraine dye and the polymer backbone, thereby diminishing the efficiency of the energy transfer and producing a "polymer-ON/dye-OFF" response. These polymer/dye combinations were evaluated in spin-coated films and polymer nanoparticles and were able to selectively detect PFAS at concentrations of ca. 150 ppb and ca. 50 ppb, respectively. Both polymer films and nanoparticles are not affected by the type of water, and similar responses to PFAS were found in milliQ and well water.

Continuous flow synthesis of pyridinium salts accelerated by multi-objective Bayesian optimization with active learning.

We report a human-in-the-loop implementation of the multi-objective experimental design via a Bayesian optimization platform (EDBO+) towards the optimization of butylpyridinium bromide synthesis under continuous flow conditions. The algorithm simultaneously optimized reaction yield and production rate (or space-time yield) and generated a well defined Pareto front. The versatility of EDBO+ was demonstrated by expanding the reaction space mid-campaign by increasing the upper temperature limit. Incorporation of continuous flow techniques enabled improved control over reaction parameters compared to common batch chemistry processes, while providing a route towards future automated syntheses and improved scalability. To that end, we applied the open-source Python module, nmrglue, for semi-automated nuclear magnetic resonance (NMR) spectroscopy analysis, and compared the acquired outputs against those obtained through manual processing methods from spectra collected on both low-field (60 MHz) and high-field (400 MHz) NMR spectrometers. The EDBO+ based model was retrained with these four different datasets and the resulting Pareto front predictions provided insight into the effect of data analysis on model predictions. Finally, quaternization of poly(4-vinylpyridine) with bromobutane illustrated the extension of continuous flow chemistry to synthesize functional materials.

Liquid Crystalline Magneto-Optically Active Peralkylated Azacoronene.

Organic Faraday rotators have gained significant attention in recent years as a promising alternative to traditional inorganic magneto-optical (MO) materials as a result of their lower cost, superior mechanical properties, and potential for large-scale deployment. This interest is peaked by the fact that a number of high symmetry, rigid, strongly optically absorbing organic chromophores display Verdet constants an order of magnitude higher than commercial inorganic Faraday rotators. Critical to the development of new generations of organic materials is the ability to organize them in optimal structures for optical coupling/measurements. We report herein the synthesis of a dodecyl-substituted hexapyrrolohexaazacoronene (C12-HPHAC) displaying discotic liquid crystalline (LC) properties and large Faraday rotation. Thin films with a redox mixed C12-HPHAC/C12-HPHAC+2 composition display a discotic columnar LC phase, are stable to air and moisture in the solid and solution states, and achieve a maximum Verdet constant of 3.36 × 105 deg T-1 m-1 at 700 nm. This result is consistent with Serber's model of magnetic circular birefringence and displays one of the largest reported Verdet constants for organic materials in the UV-Vis range. The LC phase aligns the molecules and leads to gains in Verdet constants of up to 105% through the favorable orientation of the molecules' magnetic and electric transition dipole moments with respect to the applied magnetic field.

Ultratrace PFAS Detection Using Amplifying Fluorescent Polymers.

Per- and poly(fluoroalkyl) substances (PFAS) are environmentally persistent pollutants that are of growing concern due to their detrimental effects at ultratrace concentrations (ng·L-1) in human and environmental health. Suitable technologies for on-site ultratrace detection of PFAS do not exist and current methods require complex and specialized equipment, making the monitoring of PFAS in distributed water infrastructures extremely challenging. Herein, we describe amplifying fluorescent polymers (AFPs) that can selectively detect perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) at concentrations of ng·L-1. The AFPs are highly fluorinated and have poly(p-phenylene ethynylene) and polyfluorene backbones bearing pyridine-based selectors that react with acidic PFAS via a proton-transfer reaction. The fluorinated regions within the polymers partition PFAS into polymers, whereas the protonated pyridine units create lower-energy traps for the excitons, and emission from these pyridinium sites results in red-shifting of the fluorescence spectra. The AFPs are evaluated in thin-film and nanoparticle forms and can selectively detect PFAS concentrations of ∼1 ppb and ∼100 ppt, respectively. Both polymer films and nanoparticles are not affected by the type of water, and similar responses to PFAS were found in milliQ water, DI water, and well water. These results demonstrate a promising sensing approach for on-site detection of aqueous PFAS in the ng·L-1 range.

C-Term Faraday Rotation in Low Symmetry tert-Butyl Substituted Polyferroceniums.

Molecular thin films are currently being investigated as candidate materials to replace conventional atomistic inorganic crystal-based Faraday rotators. High symmetry paramagnetic species have been reported to exhibit large Verdet constants via magnetic field splitting of degenerate ground states. However, lower symmetry open-shell species have not been extensively studied. Herein, we report the Faraday rotation of two poly di-tert-butylferroceniums with diphenylsilane and vinylene linkers. Thin films of oxidized poly[(1,1'-di-tert-butylferrocenyl)diphenylsilane] [poly(tBu2fc-SiPh2)] displayed a 30% increase in maximum Verdet constant relative to the previously reported decamethylferrocenium/PMMA composite, with Verdet constants of -4.52 × 104 deg T-1 m-1 at 730 nm and 4.46 × 104 deg T-1 m-1 at 580 nm. When a sp2-type linker was used, as with the oxidized poly(1,1'-di-tert-butyl-ferrocenylene)vinylene [poly(tBu2fc-C═C)], negligible Faraday rotation was observed. Hence, Faraday rotation can be maintained when molecular symmetry is broken, however orbital symmetry breaking in optical transitions of interest leads to a significant loss in magneto-optical activity.

Emulsion Assembly of Graphene Oxide/Polymer Composite Membranes.

Graphene oxide/polymer composite water filtration membranes were developed via coalescence of graphene oxide (GO) stabilized Pickering emulsions around a porosity-generating polymer. Triptycene poly(ether ether sulfone)-CH2NH2:HCl polymer interacts with the GO at the water-oil interface, resulting in stable Pickering emulsions. When they are deposited and dried on polytetrafluoroethylene substrate, the emulsions fuse to form a continuous GO/polymer composite membrane. X-ray diffraction and scanning electron microscopy demonstrate that the intersheet spacing and thickness of the membranes increased with increasing polymer concentration, confirming the polymer as the spacer between the GO sheets. The water filtration capability of the composite membranes was tested by removing Rose Bengal from water, mimicking separations of weak black liquor waste. The composite membrane achieved 65% rejection and 2500 g m-2 h-1 bar-1. With high polymer and GO loading, composite membranes give superior rejection and permeance performance when compared with a GO membrane. This methodology for fabrication membranes via GO/polymer Pickering emulsions produces membranes with a homogeneous morphology and robust chemical separation strength.

Interaction of N-nitrosamines with binuclear copper complexes for luminescent detection.

Cu(I) from tetrakis(acetonitrile)copper(I) hexafluorophosphate ([Cu(MeCN)4]PF6) was complexed with five structurally related phosphines containing N-heterocycles. The interactions between the resulting complexes and some N-nitrosamines were studied using X-ray crystallography as well as emission spectroscopy. Upon complexation, three phosphine ligands bridge two Cu(I) centers to give paddlewheel type structures that displayed a range of emission wavelengths spanning the visible region. N-Nitrosodimethylamine (NDMA) was shown to coordinate to one of the two copper centers in some of the paddlewheel complexes in the solid state and this interaction also quenches their emissions in solution. The influence of the weakly coordinating anion on crystal and spectroscopic properties of one of the paddlewheel complexes was also examined using tetrakis(acetonitrile)copper(I) perchlorate ([Cu(MeCN)4]ClO4) as an alternative Cu(I) source. Similarly, copper(II) perchlorate hexahydrate (Cu(ClO4)2·6H2O) was used for complexation to observe the impact of metal oxidation state on the two aforementioned properties. Lastly, the spectroscopic properties of the complex between Ph2P(1-Isoquinoline) and Cu(I) was shown to exhibit solvent dependence when the counterion is ClO4-. These Cu(I) complexes are bench stable solids and may be useful materials for developing a fluorescence based detection method for N-nitrosamines.

Chemiresistive Hydrogen Sensing with Size-Limited Palladium Nanoparticles in Iptycene-Containing Poly(arylene ether)s.

Metal nanoparticles have been widely employed in chemical sensing due to their high reactivity toward various gases. The size of the metal nanoparticles often dictates their reactivity and hence their performance as chemiresistive sensors. Herein, we report that iptycene-containing poly(arylene ether)s (PAEs) have been shown to limit the growth of palladium nanoparticles (Pd NPs) and stabilize the Pd NPs dispersion. These porous PAEs also facilitate the efficient transport of analytes. Single-walled carbon nanotube (SWCNT)-based chemiresistors and graphene field-effect transistors (GFETs) using these PAE-supported small Pd NPs are sensitive, selective, and robust sensory materials for hydrogen gas under ambient conditions. Generalizable strategies including presorting SWCNTs with pentiptycene-containing poly(p-phenylene ethynylene)s (PPEs) and thermal annealing demonstrated significant improvements in the chemiresistive performance. The polymer:NP colloids produced in this study are readily synthesized and solution processable, and these methods are of general utility.

Improved Procedures for the Synthesis of 9,9-Disubstituted 9,10-Dihydroacridines.

We found that a previously reported synthesis of 9,9-disubstituted 9,10-dihydroacridines (DHAs) that relied on an acid-catalyzed cyclization was plagued by a competing elimination reaction, resulting in some elimination products being incorrectly identified as their structural isomer DHAs. In this report, we provide improved synthetic procedures for 9,9-disubstituted DHAs, demonstrated by the synthesis of two 9,9-diethyl DHAs.

Amplified Overhauser DNP with Selective Deuteration: Attenuation of Double-Quantum Cross-Relaxation.

We recently used selective 2H labeling of BDPA to investigate the Overhauser Effect (OE) dynamic nuclear polarization (DNP) mechanism in insulating solids doped with 1,3-bis(diphenylene)-2-phenylallyl (BDPA), and established that the α and γ 1H spins on the fluorene rings are responsible for generating a zero quantum (ZQ) mediated positive bulk polarization. Here, we establish that the phenyl 1H spins relax via double-quantum (DQ) processes and therefore contribute negative enhancements which attenuate the OE-DNP. With measurements at different magnetic field strengths, we show that phenyl-d5-BDPA offers >50% improvement in OE-DNP enhancement compared to h21-BDPA attaining a maximum of ∼90 at 14.1 T and 5 kHz MAS, the highest observed OE-DNP enhancement to date under these conditions. The approach may be utilized to optimize other polarizing agents exhibiting an OE, an important DNP mechanism with a favorable field and spinning frequency dependence.

Molecular Shape and Polar Order in Columnar Liquid Crystals.

Bottom-up materials design by the conceiving of new molecular building blocks is powerful and chemists are uniquely qualified to innovate. Liquid crystals (LCs) and related soft crystals, collectively called mesophases, naturally create materials with dynamic properties. The thermotropic LC state has a liquid-like intermolecular disorder, but the cooperative nature of these materials facilitates a long-range directional order (alignment) that couples strongly to applied electric/magnetic fields and interfaces. Thermotropic LCs are held together by mesogen cores, which are often unsaturated with anisotropic polarizability, and are appended with flexible (often n-alkane) side chains. Thermal excitation of the side chains produces large amplitude motions that drive a melting transition, and the anisotropic attractions between mesogenic cores produce a directional organization that produces the LC order. LCs are liquids as defined by thermodynamics and may not contain three-dimensional (3D) organization. However, in many cases there are 3D ordered phases below the melting temperatures, which are soft (deformable) plastic materials. Unconventional mesogens offer opportunities to create responsive molecular assemblies with optical, electronic, or magnetic activity. I will detail in this account my efforts to control these dynamic states with the goal of creating polar organizations in columnar LCs. The use of molecular shape, dative bonding, and dynamic correlations between molecules in fluid/plastic phases will be highlighted and how applied electric fields can polarize select materials.

Cyclodextrin-Functionalized Polypyrrole Particles for the Extraction of Aromatics from Water.

We describe the preparation of oil-in-water (o/w) colloidal particles with a polypyrrole (pPy) shell in which cyclodextrin has been incorporated at the oil-water interface via either physical adsorption or reaction with the pPy shell. The utility of these particles was assessed by the extraction of organic dyes from water. In all cases, we found that cyclodextrin incorporation significantly improved dye uptake, giving up to 78 ± 11% dye extraction in the case of a 100 ppm solution of 4-nitroaniline with a covalently incorporated cyclodextrin. We demonstrated the ability of our colloidal particles to extract nicotine-derived nitrosamine ketone (NNK), a potent carcinogen, from aqueous solution. By treating the solution containing 100 ppm NNK with our particles over 24 and 48 h, we found that NNK removal reached 65 ± 2 and 83 ± 1%, respectively. The uptake could be improved by re-treating a solution with additional freshly prepared particles, to achieve 95 ± 1% NNK extraction with a covalently incorporated cyclodextrin.