Real-Time Determination of Molecular Weight: Use of MaDDOSY (Mass Determination Diffusion Ordered Spectroscopy) to Monitor the Progress of Polymerization Reactions.

Knowledge of molecular weight is an integral factor in polymer synthesis, and while many synthetic strategies have been developed to help control this, determination of the final molecular weight is often only measured at the end of the reaction. Herein, we provide a technique for the online determination of polymer molecular weight using a universal, solvent-independent diffusion ordered spectroscopy (DOSY) calibration and evidence its use in a variety of polymerization reactions.

A method for estimation of plasma protein binding using diffusion ordered NMR spectroscopy (DOSY).

The plasma protein binding (PPB) of a drug plays a key role in both its pharmacokinetic and pharmacodynamic properties. During lead optimisation, medium and high throughput methods for the early determination of PPB can provide important information about potential PKPD profile within a chemotype or between different chemotype series. Diffusion ordered spectroscopy (DOSY) is an NMR spectroscopic technique that measures the diffusion of a molecule through the magnetic field gradient, according to its molecular size/weight. Here, we describe the use of DOSY for a rapid and straightforward method to evaluate the PPB of drug molecules, using their binding to bovine serum albumin (BSA) as a model.

Insight into the liposomal encapsulation of mono and bis-naphthalimides.

Mitonafide-loaded liposomes are a promising strategy to overcome the neurotoxicity observed in clinical trials for this drug. This study investigates the influence of loaded mitonafide or a dimer analogue on different liposomal formulations and their therapeutic efficacy in vitro. Physicochemical properties of the liposomes were manipulated using different loading methods (namely bilayer or core loading) and varying the rigidity of the bilayer using distinct phospholipid compositions. Our results demonstrated that the mitonafide dimer analogue had a comparable encapsulation efficiency (EE%) into the liposomes when loaded into rigid or flexible bilayers in contrast to the low mitonafide monomer EE%. A pH gradient core loading method resulted in a more efficient mechanism to load the monomer into the liposomes. DOSY NMR and spectrofluorometric studies revealed key differences in the structure of the vesicles and the arrangement of the monomer or the dimer in the bilayer or the core of the liposomes. The in vitro assessment of the formulations using MDA-MB-231 and RT-112 cells revealed that a flexible lipid bilayer allows a faster drug release, which correlated well with the spectroscopy studies. This study investigated for the first time that the characteristics of the lipid bilayer and the loading method influence the encapsulation efficacy, colloidal properties, photoactivity and stability of mono and bis-naphthalimides loaded in a liposomal carrier, essential factors that will impact the performance of the formulation in a biological scenario.

Oligo(styryl)benzenes liposomal AIE-dots for bioimaging and phototherapy in an in vitro model of prostate cancer.

Whilst the development of advanced organic dots with aggregation-induced emission characteristics (AIE-dots) is being intensively studied, their clinical translation in efficient biotherapeutic devices has yet to be tackled. This study explores the synergistic interplay of oligo(styryl)benzenes (OSBs), potent fluorogens with an increased emission in the aggregate state, and Indocyanine green (ICG) as dual Near Infrared (NIR)-visible fluorescent nanovesicles with efficient reactive oxygen species (ROS) generation capacity for cancer treatment using photodynamic therapy (PDT). The co-loading of OSBs and ICG in different nanovesicles has been thoroughly investigated. The nanovesicles' physicochemical properties were manipulated via molecular engineering by modifying the structural properties of the lipid bilayer and the number of oligo(ethyleneoxide) chains in the OSB structure. Diffusion Ordered Spectroscopy (DOSY) NMR and spectrofluorometric studies revealed key differences in the structure of the vesicles and the arrangement of the OSB and ICG in the bilayer. The in vitro assessment of these OSB-ICG nanovesicles revealed that the formulations can increase the temperature and generate ROS after photoirradiation, showing for the first time their potential as dual photothermal/photodynamic (PTT/PDT) agents in the treatment of prostate cancer. Our study provides an exciting opportunity to extend the range of applications of OSB derivates to potentiate the toxicity of phototherapy in prostate and other types of cancer.

MaDDOSY (Mass Determination Diffusion Ordered Spectroscopy) using an 80 MHz Bench Top NMR for the Rapid Determination of Polymer and Macromolecular Molecular Weight.

Measurement of molecular weight is an integral part of macromolecular and polymer characterization which usually has limitations. Herein, this article presents the use of a bench-top 80 MHz Nuclear Magnetic Resonance (NMR) spectrometer for diffusion-ordered spectroscopy as a practical and rapid approach for the determination of molecular weight/size using a novel solvent and polymer-independent universal calibration.

Evaluating the Irritant Factors of Silicone and Hydrocolloid Skin Contact Adhesives Using Trans-Epidermal Water Loss, Protein Stripping, Erythema, and Ease of Removal.

A composite silicone skin adhesive material was designed to improve its water vapor permeability to offer advantages to wearer comfort compared to existing skin adhesive dressings available (including perforated silicone and hydrocolloid products). The chemical and mechanical properties of this novel dressing were analyzed to show that it has a high creep compliance, offering anisotropic elasticity that is likely to place less stress on the skin. A participant study was carried out in which 31 participants wore a novel silicone skin adhesive (Sil2) and a hydrocolloid competitor and were monitored for physiological response to the dressings. Trans-epidermal water loss (TEWL) was measured pre- and postwear to determine impairment of skin barrier function. Sil2 exhibited a higher vapor permeability than the hydrocolloid dressings during wear. Peel strength measurements and dye counter staining of the removed dressings showed that the hydrocolloid had a higher adhesion to the participants' skin, resulting in a greater removal of proteins from the stratum corneum and a higher pain rating from participants on removal. Once the dressings were removed, TEWL of the participants skin beneath the Sil2 was close to normal in comparison to the hydrocolloid dressings that showed an increase in skin TEWL, indicating that the skin had been highly occluded. Analysis of the skin immediately after removal showed a higher incidence of erythema following application of hydrocolloid dressings (>60%) compared to Sil2, (<30%). In summary, this modified silicone formulation demonstrates superior skin protection properties compared to hydrocolloid dressings and is more suitable for use as a skin adhesive.

Supramolecular chemistry enables vat photopolymerization 3D printing of novel water-soluble tablets.

Vat photopolymerization has garnered interest from pharmaceutical researchers for the fabrication of personalised medicines, especially for drugs that require high precision dosing or are heat labile. However, the 3D printed structures created thus far have been insoluble, limiting printable dosage forms to sustained-release systems or drug-eluting medical devices which do not require dissolution of the printed matrix. Resins that produce water-soluble structures will enable more versatile drug release profiles and expand potential applications. To achieve this, instead of employing cross-linking chemistry to fabricate matrices, supramolecular chemistry may be used to impart dynamic interaction between polymer chains. In this study, water-soluble drug-loaded printlets (3D printed tablets) are fabricated via digital light processing (DLP) 3DP for the first time. Six formulations with varying ratios of an electrolyte acrylate monomer, [2-(acryloyloxy)ethyl]trimethylammonium chloride (TMAEA), and a co-monomer, 1-vinyl-2-pyrrolidone (NVP), were prepared to produce paracetamol-loaded printlets. 1H NMR spectroscopy analysis confirmed the integration of TMAEA and NVP in the polymer, and residual TMAEA monomers were found to be present only in trace amounts (0.71 - 1.37 %w/w). The apparent molecular mass of the photopolymerised polymer was found to exceed 300,000 Da with hydrodynamic radii of 15 - 20 nm, estimated based on 1H DOSY NMR measurements The loaded paracetamol was completely released from the printlets between 45 minutes to 5 hours. In vivo single-dose acute toxicity studies in rats suggest that the printlets did not cause any tissue damage. The findings reported in this study represent a significant step towards the adoption of vat photopolymerization-based 3DP to produce personalised medicines.

Chain-Extendable Crosslinked Hydrogels Using Branching RAFT Modification.

Functional crosslinked hydrogels were prepared from 2-hydroxyethyl methacrylate (HEMA) and acrylic acid (AA). The acid monomer was incorporated both via copolymerization and chain extension of a branching, reversible addition-fragmentation chain-transfer agent incorporated into the crosslinked polymer gel. The hydrogels were intolerant to high levels of acidic copolymerization as the acrylic acid weakened the ethylene glycol dimethacrylate (EGDMA) crosslinked network. Hydrogels made from HEMA, EGDMA and a branching RAFT agent provide the network with loose-chain end functionality that can be retained for subsequent chain extension. Traditional methods of surface functionalization have the downside of potentially creating a high volume of homopolymerization in the solution. Branching RAFT comonomers act as versatile anchor sites by which additional polymerization chain extension reactions can be carried out. Acrylic acid grafted onto HEMA-EGDMA hydrogels showed higher mechanical strength than the equivalent statistical copolymer networks and was shown to have functionality as an electrostatic binder of cationic flocculants.

Facing death, returning to life: A qualitative analysis of MDMA-assisted therapy for anxiety associated with life-threatening illness.

Anxiety associated with life-threatening illness (LTI) is a pervasive mental health issue with a wide impact. A spectrum of traditional pharmacotherapies and psychotherapies are available, but offer varying success in reducing symptoms and improving quality of life. We explore a novel therapy for this condition by assessing prominent thematic elements from participant narrative accounts of a pilot phase 2 clinical trial of 3,4 Methylenedioxymethamphetamine-Assisted Therapy (MDMA-AT) for treating anxiety associated with LTI. Semi-structured qualitative interviews were conducted with a subset of adult participants 3 months following completion of this trial. This qualitative analysis sought to complement, clarify, and expand upon the quantitative findings obtained from the clinical trial to further understand the process and outcomes of the treatment. Interviews were coded and analyzed using an Interpretative Phenomenological Analysis (IPA) methodological framework. Participants described in detail their experiences from before, during and after the trial, which were analyzed and categorized into thematic clusters. Specifically, participants explored what they felt were important elements of the therapeutic process including processing trauma and grief, exploring mystical and existential experiences, engaging with the present moment with reduced physiological activation, and facing illness and existential fears. Outcomes of the treatment included increased ability to cope with LTI, reduced psychological symptoms, improved vitality and quality of life, and feeling more resourced. Participant narratives also showed a reconnection to life and greater emotional resilience in response to trauma and medical relapse. These findings are compared to similar treatments for the same indication. Limitations and challenges encountered in conducting this study are discussed along with implications for theory and clinical treatment.

Fluorescence spectroscopy analysis of fly ash removal from aqueous systems: adsorption of alginate to silica and alumina.

Fly ash is a toxic industrial waste, mainly consisting of silica and alumina particles, that has been found discharged into the environment. It is proposed that alginate, a naturally occurring biopolymer, can bind to these minerals and thus play a role in water purification. The binding forces involved in this process consist of weak interactions, such as van der Waals forces and electrostatic interactions. Although the attachment of alginate to mineral surfaces is mainly governed by its carboxylate groups, hydroxyl moieties could play a role in the interaction between the polymer and minerals. This work aims to use the SiO2 and Al2O3 particles as models for fly ash and to show the use of alginate biopolymers (fluorescently labelled with an aminonaphthaline sulfonate fluorophore (AmNS)) to coagulate them. The addition of simple electrolytes like NaCl and CaCl2 encourages the coiling of the polymer chain at high pH values which has an effect on its capability to bind to the inorganic particles. A combination of fluorescence and ICP-MS demonstrated that alginate has a considerable adsorption affinity for Al2O3, whereas it attracts SiO2 weakly. The adsorption process is pH dependent: strong adsorption was observed at low pH values. The dependence of adsorption on the mineral (Al2O3 and SiO2) concentration was also examined under different pH conditions: the adsorption amount was observed to increase by increasing the solid concentration. Adsorption isotherms obtained at low and high mineral concentrations were found to be Henry in type.

Generation and use of functionalised hydrogels that can rapidly sample infected surfaces.

This paper outlined our method for developing polymer-linked contact lens type materials for rapid detection and differentiation of Gram-positive, Gram-negative bacteria and fungi in infected corneas. It can be applied to both model synthetic or ex-vivo corneal models and has been successfully trialed in an initial efficacy tested animal study. First a hydrogel substrate for the swab material is selected, we have demonstrated selective swabs using a glycerol monomethacrylate hydrogel. Alternatively any commercial material with carboxylic acid functional groups is suitable but risks nonspecific adhesion. This is then functionalised via use of N-hydroxysuccinimide reaction with amine groups on the specified highly branched polymer ligand (either individually gram negative, gram positive or fungal binding polymers or a combination of all three can be employed for desired sensing application). The hydrogel is then cut into swabs suitable for sampling, used, and then the presence of gram positive, game negative and fungi are disclosed by the sequential addition of dyes (fluorescent vancomycin, fluorescein isothiocyanate and calcofluor white). In summary this method presents: Method to produce glycerol monomethacrylate hydrogels to minimize nonspecific binding Methods of attaching pathogen binding highly branched polymers to produce selective hydrogel swabs Method for disclosing bound pathogens to this swab using sequential dye addition.

Small variations in reaction conditions tune carbon dot fluorescence.

The development of robust and reproducible synthetic strategies for the production of carbon dots (CDs) with improved fluorescence quantum yields and distinct emission profiles is of great relevance given the vast range of applications of CDs. The fundamental understanding at a molecular level of their formation mechanism, chemical structure and how these parameters are correlated to their photoluminescence (PL) properties is thus essential. In this study, we describe the synthesis and structural characterization of a range of CDs with distinct physico-chemical properties. The materials were prepared under three minutes of microwave irradiation using the same common starting materials (D-glucosamine hydrochloride 1 and ethylenediamine 2) but modifying the stoichiometry of the reagents. We show that small variation in reaction conditions leads to changes in the fluorescent behaviour of the CDs, especially in the selective enhancement of overlapped fluorescence bands. Structural analysis of the different CD samples suggested different reaction pathways during the CD formation and surface passivation, with the latter step being key to the observed differences. Moreover, we demonstrate that these materials have distinct reversible response to pH changes, which we can be attribute to different behaviour towards protonation/deprotonation events of distinct emission domains present within each nanomaterial. Our results highlight the importance of understanding the reaction pathways that lead to the formation of this carbon-based nanomaterials and how this can be exploited to develop tailored materials towards specific applications.

Evaluation of ligand modified poly (N-Isopropyl acrylamide) hydrogel for etiological diagnosis of corneal infection.

Corneal ulcers, a leading cause of blindness in the developing world are treated inappropriately without prior microbiology assessment because of issues related to availability or cost of accessing these services. In this work we aimed to develop a device for identifying the presence of Gram-positive or Gram-negative bacteria or fungi that can be used by someone without the need for a microbiology laboratory. Working with branched poly (N-isopropyl acrylamide) (PNIPAM) tagged with Vancomycin, Polymyxin B, or Amphotericin B to bind Gram-positive bacteria, Gram-negative bacteria and fungi respectively, grafted onto a single hydrogel we demonstrated specific binding of the organisms. The limit of detection of the microbes by these polymers was between 10 and 4 organisms per high power field (100X) for bacteria and fungi binding polymers respectively. Using ex vivo and animal cornea infection models infected with bacteria, fungi or both we than demonstrated that the triple functionalised hydrogel could pick up all 3 organisms after being in place for 30 min. To confirm the presence of bacteria and fungi we used conventional microbiology techniques and fluorescently labelled ligands or dyes. While we need to develop an easy-to-use either a colorimetric or an imaging system to detect the fluorescent signals, this study presents for the first time a simple to use hydrogel system, which can be applied to infected eyes and specifically binds different classes of infecting agents within a short space of time. Ultimately this diagnostic system will not require trained microbiologists for its use and will be used at the point-of-care.

Developments in silicone technology for use in stoma care.

Soft silicone's flexibility, adhesive capacity and non-toxic, non-odourous and hypoallergenic nature have made it an established material for adhesive and protective therapeutic devices. In wound care, silicone is a component of contact layer dressings for superficial wounds and silicone gel sheeting for reducing the risk of scarring, as well as of barriers for incontinence-associated dermatitis. Regarding stoma accessories, silicone is established in barrier films to prevent contact dermatitis, adhesive removers to prevent skin stripping and filler gels to prevent appliance leaks. Until recently, silicone has not been used in stoma appliances flanges, as its hydrophobic nature has not allowed for moisture management to permit transepidermal water loss and prevent maceration. Traditional hydrocolloid appliances manage moisture by absorbing water, but this can lead to saturation and moisture-associated skin damage (MASD), as well as increased adhesion and resultant skin tears on removal, known as medical adhesive-related skin injury (MARSI). However, novel silicone compounds have been developed with a distinct evaporation-based mechanism of moisture management. This uses colloidal separation to allow the passage of water vapour at a rate equivalent to normal transepidermal water loss. It has been shown to minimise MASD, increase wear time and permit atraumatic removal without the use of adhesive solvents. Trio Healthcare has introduced this technology with a range of silicone-based flange extenders and is working with the University of Bradford Centre for Skin Sciences on prototype silicone-based stoma appliance flanges designed to significantly reduce the incidence of peristomal skin complications, such as MARSI and MASD. It is hoped that this will also increase appliance wear time, reduce costs and improve patient quality of life.

Branched amphotericin functional poly(N-isopropyl acrylamide): an antifungal polymer.

Branched poly(N-isopropylacrylamide) was functionalized with Amphotericin B (AmB) at the chain ends to produce an antifungal material. The polymer showed antifungal properties against AmB-sensitive strains of Candida albicans, Fusarium keratoplasticum and Aspergillus flavus (minimal inhibitory concentration ranged from 5 to 500 µg ml-1) but was not effective against an AmB resistant strain of C. albicans nor against Candida tropicalis. The polymer end groups bound to the AmB target, ergosterol, and the fluorescence spectrum of a dye used as a solvatochromic probe, Nile red, was blue shifted indicating that segments of the polymer became desolvated on binding. The polymer was less toxic to corneal and renal epithelial cells and explanted corneal tissue than the free drug. Also, the polymer did not induce reactive oxygen species release from peripheral blood mononuclear cells, nor did it cause a substantial release of the proinflammatory cytokines, tumour necrosis factor-α and interleukin-1ß (at 0.5 mg ml-1).

Development of the Psychological Insight Questionnaire among a sample of people who have consumed psilocybin or LSD.

BACKGROUND: Several measures have been developed to examine acute psychedelic effects (e.g. mystical-type and challenging experiences), but no measure assesses acute psychologically insightful experiences that may occur during psychedelic experiences. AIM: The purpose of this study was to develop and examine the psychometric properties of the Psychological Insight Questionnaire. METHOD: A cross-sectional survey study among psilocybin and LSD users. Respondents (n=1661; Mage=22.9, standard deviation=8.5; Caucasian/White=83%; non-Hispanic=91%; men=72%; United States resident=66%) completed an Internet-based survey. RESULTS: The Psychological Insight Questionnaire consists of 23 items with two subscales: (a) Avoidance and Maladaptive Patterns Insights and (b) Goals and Adaptive Patterns Insights. Construct validity of the Psychological Insight Questionnaire was supported by strong correlations of the Psychological Insight Questionnaire (and Avoidance and Maladaptive Patterns Insights and Goals and Adaptive Patterns Insights subscales) scores with the insight subscale of the Session Impacts Scale, and weak-to-moderate correlations with the Mystical Experiences and Challenging Experiences Questionnaires. Furthermore, Psychological Insight Questionnaire (and Avoidance and Maladaptive Patterns Insights and Goals and Adaptive Patterns Insights subscales) scores were moderately-to-strongly correlated with retrospectively reported increases in psychological flexibility, and well-being/life satisfaction that were attributed to a memorable psychedelic experience. Lastly, incremental validity was established showing that the Psychological Insight Questionnaire (and Avoidance and Maladaptive Patterns Insights subscale) scores predict unique variance in changes in psychological flexibility, and Psychological Insight Questionnaire (and Avoidance and Maladaptive Patterns Insights and Goals and Adaptive Patterns Insights subscales) scores predict changes in well-being and life satisfaction, beyond measures of acute mystical-type and challenging effects. CONCLUSIONS: The Psychological Insight Questionnaire has the potential to extend the understanding of the acute and enduring effects of psychedelics. Further longitudinal research is necessary to determine the long-term predictive validity of the Psychological Insight Questionnaire and to examine the role of psychological insight in predicting therapeutic outcomes.

Semi-interpenetrating Polyurethane Network Foams Containing Highly Branched Poly(N-isopropyl acrylamide) with Vancomycin Functionality.

Highly branched poly(N-isopropylacrylamide) (HB-PNIPAM), functionalized with vancomycin at the chain ends, acted as a bacterial adhesive and was incorporated into polyurethane foams to form semi-interpenetrating networks. PNIPAM was labeled with a solvatochromic dye, Nile red. It was found that the thermal response of the polymer was dependent on the architecture, and temperature-dependent color changes were observed within the foam. The foams had open pore structures, and the presence of HB-PNIPAM substantially reduced the shrinkage of the foam as the temperature was increased up to 20 °C. The foams were selectively adhesive for Staphylococcus aureus (Gram-positive bacteria) compared to Pseudomonas aeruginosa (Gram-negative bacteria), and the presence of S. aureus was indicated by increased fluorescence intensity (590-800 nm).

Developments in silicone technology for use in stoma care.

Soft silicone's flexibility, adhesive capacity and non-toxic, non-odourous and hypoallergenic nature have made it an established material for adhesive and protective therapeutic devices. In wound care, silicone is a component of contact layer dressings for superficial wounds and silicone gel sheeting for reducing the risk of scarring, as well as of barriers for incontinence-associated dermatitis. Regarding stoma accessories, silicone is established in barrier films to prevent contact dermatitis, adhesive removers to prevent skin stripping and filler gels to prevent appliance leaks. Until recently, silicone has not been used in stoma appliances flanges, as its hydrophobic nature has not allowed for moisture management to permit transepidermal water loss and prevent maceration. Traditional hydrocolloid appliances manage moisture by absorbing water, but this can lead to saturation and moisture-associated skin damage (MASD), as well as increased adhesion and resultant skin tears on removal, known as medical adhesive-related skin injury (MARSI). However, novel silicone compounds have been developed with a distinct evaporation-based mechanism of moisture management. This uses colloidal separation to allow the passage of water vapour at a rate equivalent to normal transepidermal water loss. It has been shown to minimise MASD, increase wear time and permit atraumatic removal without the use of adhesive solvents. Trio Healthcare has introduced this technology with a range of silicone-based flange extenders and is working with the University of Bradford Centre for Skin Sciences on prototype silicone-based stoma appliance flanges designed to significantly reduce the incidence of peristomal skin complications, such as MARSI and MASD. It is hoped that this will also increase appliance wear time, reduce costs and improve patient quality of life.

Photosynthesis and crop productivity are enhanced by glucose-functionalised carbon dots.

From global food security to textile production and biofuels, the demands currently made on plant photosynthetic productivity will continue to increase. Enhancing photosynthesis using designer, green and sustainable materials offers an attractive alternative to current genetic-based strategies and promising work with nanomaterials has recently started to emerge. Here we describe the in planta use of carbon-based nanoparticles produced by low-cost renewable routes that are bioavailable to mature plants. Uptake of these functionalised nanoparticles directly from the soil improves photosynthesis and also increases crop production. We show for the first time that glucose functionalisation enhances nanoparticle uptake, photoprotection and pigment production, unlocking enhanced yields. This was demonstrated in Triticum aestivum 'Apogee' (dwarf bread wheat) and resulted in an 18% increase in grain yield. This establishes the viability of a functional nanomaterial to augment photosynthesis as a route to increased crop productivity.