Bioremediation of Brilliant Green cationic dye from water using Nutraceutical Industrial Coriander Seed Spent as an adsorbent: adsorption isotherms, kinetic models, and thermodynamic studies.

The article details a feasibility study of removing Brilliant Green (BG), a mutagenic dye from an aqueous solution by adsorption using low-cost coriander seed spent as a by-product in the nutraceutical industry. The study includes an analysis of the parameters that affect the adsorption process. The variables that have been identified include pH, dye concentration, process temperature, adsorbent amount, and particle size of the adsorbent. To obtain information on the adsorption process and to design the mechanism of the adsorption system on experimental equilibrium, 10 isotherm models, namely, Langmuir, Freundlich, Jovanovic, Dubinin-Radushkevich, Sips, Redlich-Peterson, Toth, Vieth-Sladek, Brouers-Sotolongo, and Radke-Prausnitz were applied. It was discovered that the experimental adsorption capacity, qe, was roughly 110 mg g-1. The result has a maximum adsorption of 136.17 mg g-1 as predicted by Dubinin-Radushkevich isotherm. Diffusion film models, Dumwald-Wagner and Weber-Morris models, and pseudo-first- and second-order models, were used to determine the adsorption kinetics. It was realized that the adsorption kinetics data fit into a pseudo-second-order model. Thermodynamic analysis with a reduced enthalpy change suggests a physical process. The values of the thermodynamic parameters ΔG0, ΔH0, and ΔS0 demonstrated an endothermic and nearly spontaneous process of adsorption. The small valuation of ΔH0 specifies that the process is physical. FTIR spectroscopy and SEM imaging were used to confirm that the BG dye had been adsorbing on the adsorbent surface. The study concludes that NICSS is an effective adsorbent to extract BG dye from wastewater solutions, offers insights into numerous dye and adsorbent interaction possibilities and indicates that the process can be scaled to fit into the concept of circular economy.

An attempt has been made to link the concept of circular economy through design and execution of the experiments in the laboratory scale. The following highlights will justify the newer approach adopted by the authors.The experiments are designed by intention to suit the concept of circular economy.The use of NICSS, a nutraceutical industrial spent, which has no feed, fertilizer, or fuel value suits the sustainability concept.The reuse of "waste" from the remediation process replaces the "end-of-life" concept in circular economy.

A practical approach to demonstrate the circular economy in remediation of textile dyes using nutraceutical industrial spent.

We used Nutraceutical Industrial Coriander Seed Spent (NICSS), a readily available, cheap, eco-friendly, and ready-to-use material, as an innovative adsorbent for the bioremediation of a bisazo Acid Red 119 (AR 119) dye, which is likely a mutagen from textile industrial effluents (TIE). A laboratory-scale experiment was tailored to demonstrate the framework of the circular economy (CE) in the remediation of textile dyes using Nutraceutical Industrial Spent to align with the principles of sustainability and valorization. An experimental q e value of 97.00 mg g-1 was obtained. For the practicality and effectiveness of the method, a two-level fractional factorial experimental design (FFED) was employed to determine variables that influence the adsorption capacity of NICSS. At optimal settings (pH of 1.4, adsorbent dosage of 6.000 g L-1, adsorbent particle size of 96 µm, initial dye concentration of 599 mg L-1, adsorption duration of 173 min, orbital shaking speed of 165 rpm, and temperature of 35 °C), the maximum adsorption efficiency achieved through statistical optimization was 614 mg g-1. Six factors influencing the adsorption process were examined experimentally and were considered important for commercialization. Three orders of magnitude were applied to the identified variables in scaling experiments. Adsorption-equilibrium data were analyzed using nine isotherm models. The best fit was discovered to be the Vieth-Sladek adsorption isotherm model. The suitable mechanism for the overall rate of the adsorption process was a pseudo-second-order reaction: mass-transfer mechanistic studies were predicted to predominate over the diffusion process. NICSS was characterized using SEM and FTIR spectroscopy. Utilizing plastic trash, the dye-adsorbed NICSS that was recovered as "sludge" was utilized as a reinforcing material to create composites. Dye-adsorbed NICSS thermoplastic and thermoset composites were studied and compared with NICSS composites in terms of their physicomechanical and chemical properties.

Insights into isotherms, kinetics, and thermodynamics of adsorption of acid blue 113 from an aqueous solution of nutraceutical industrial fennel seed spent.

Research studies have been carried out to accentuate Fennel Seed Spent, a by-product of the Nutraceutical Industry, as an inexpensive, recyclable and operational biosorbent for bioremediation of Acid Blue 113 (AB113) in simulated water-dye samples and textile industrial effluent (TIE). The physical process of adhesion of AB113 on the surface of the biosorbent depends on various parameters, such as the initial amount of the dye, amount and expanse of the biosorbent particles, pH of the solution and temperature of the medium. The data obtained was analyzed using three two-parameter and five three-parameter adsorption isotherm models to glean the adsorbent affinities and interaction mechanism of the adsorbate molecules and adsorbent surface. The adsorption feature study is conducted employing models of Weber-Morris, pseudo 1st and 2nd order, diffusion film model, Dumwald-Wagner and Avrami model. The study through 2nd order pseudo and Avrami models produced complementary results for the authentication of experimental data. The thermodynamic features, ΔG0, ΔH0, and ΔS0 of the adsorption process are acclaimed to be almost spontaneous, physical in nature and endothermic in their manifestation. Surface characterization was carried out using Scanner Electron Microscopy, and identification and determination of chemical species and molecular structure was performed using Infrared Spectroscopy (IR). Maximum adsorption evaluated using statistical optimization with different combinations of five independent variables to study the individual as well as combined effects by Fractional Factorial Experimental Design (FFED) was 236.18 mg g-1 under optimized conditions; pH of 2, adsorbent dosage of 0.500 g L-1, and an initial dye concentration of 209.47 mg L-1 for an adsorption time of 126.62 min with orbital shaking of 165 rpm at temperature 49.95 °C.

Bioremediation of Textile Industrial Effluents Using Nutraceutical Industrial Spent: Laboratory-Scale Demonstration of Circular Economy.

This research reports the first-ever study on abundantly available, environmentally friendly, low-cost and ready-for-use Nutraceutical Industrial Cumin Seed Spent (NICUS) as an innovative adsorbent for bioremediation of a bisazo Acid Red 119 (AR119) dye, a probable mutagen from textile industrial effluents (TIEs). The experiment at the laboratory scale is designed to suit the concepts of sustainability and valorisation under the domain of circular economy. The experimental qe value obtained was 96.00 mg g-1. The optimised conditions of parameters are as follows: pH of 2; adsorption time, 210 min; adsorbent dosage, 0.300 g L-1; particle size, 175 µM; initial dye concentration, 950 mg L-1; orbital shaking, 165 rpm and temperature, 50 °C, producing an impressive value of 748 mg of dye adsorbing on 1 g of dry NICUS. The adsorption capacity of NICUS obtained from the quadratic model developed for process optimisation gave values of 748 mg g-1. As a prelude to commercialisation, five variables that affect the adsorption process were experimentally studied. For the feasibility and efficiency of the process, a two-level fractional factorial experimental design (FFED) was applied to identify variables that influence the adsorption capacity of NICUS. The identified variables were applied to scale experiments by three orders. Nine isotherm models were used to analyse the adsorption equilibrium data. The Vieth-Sladek adsorption isotherm model was found to be the best fit. The pseudo-second-order reaction was the appropriate mechanism for the overall rate of the adsorption process. Mechanistic studies related to mass transfer phenomena were more likely to be dominant over the diffusion process. Techniques such as SEM, FTIR and CHN analysis were used to characterise NICUS. The dye-adsorbed NICUS obtained as "sludge" was used as a reinforcing material for the fabrication of composites using plastic waste. The physicomechanical and chemical properties of thermoplastic and thermoset composite using dye-adsorbed NICUS were evaluated and compared with NICUS composites. Prospects of integrating Small and Medium Enterprises (SMEs) into the circular economy of Nutraceutical Industrial Spent (NIS) are discussed.

Adsorption of ethidium bromide from aqueous solution onto nutraceutical industrial fennel seed spent: Kinetics and thermodynamics modeling studies.

Dye pollutants from research laboratories are one of the major sources for environmental contamination. In the present study, a nutraceutical industrial fennel seed spent (NIFSS) was explored as potential adsorbent for removal of ethidium bromide (EtBr) from aqueous solution. The adsorbent was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Through batch experiments, the operating variables like initial dye concentration, adsorbent dosage, temperature, contact time, and pH were optimized. Equilibrium data were analyzed using three number of two-parameter and six number of three-parameter isotherm models. The adsorption kinetics was studied using pseudo-first order and pseudo-second order. The diffusion effects were studied by film diffusion, Webber-Morris, and Dumwald-Wagner diffusion models. The thermodynamic parameters; change in enthalpy (ΔHº), entropy (ΔSº), and Gibbs free energy (ΔGº) of adsorption system were also determined and evaluated.

Development of sustainable dye adsorption system using nutraceutical industrial fennel seed spent-studies using Congo red dye.

Fennel seed spent (FSS)-an inexpensive nutraceutical industrial spent has been used as an efficient biosorbent for the removal of Congo red (CR) from aqueous media. Results show that the conditions for maximum adsorption would be pH 2-4 and 30°C were ideal for maximum adsorption. Based on regression fitting of the data, it was determined that the Sips isotherm (R2 = 0.994, χ2 = 0.5) adequately described the mechanism of adsorption, suggesting that the adsorption occurs homogeneously with favorable interaction between layers with favorable interaction between layers. Thermodynamic analysis showed that the adsorption is favorable (negative values for ΔG°) and endothermic (ΔH° = 12-20 kJ mol-1) for initial dye concentrations of 25, 50, and 100 ppm. The low ΔH° value indicates that the adsorption is a physical process involving weak chemical interactions like hydrogen bonds and van der Waals interactions. The kinetics revealed that the adsorption process showed pseudo-second-order tendencies with the equal influence of intraparticle as well as film diffusion. The scanning electron microscopy images of FSS show a highly fibrous matrix with a hierarchical porous structure. The Fourier transform infrared spectroscopy analysis of the spent confirmed the presence of cellulosic and lignocellulosic matter, giving it both hydrophilic and hydrophobic properties. The investigations indicate that FSS is a cost-effective and efficient biosorbent for the remediation of toxic CR dye.

Molecular interaction of fenvalarate with actin.

The structure of α-Cyano-3-phenoxybenzyl-2-(4-chlorophenyl)-3-methylbutyrate (Fenvalarate) has been established by X-ray crystallography to understand the structure-activity relationship, which is of paramount importance in the toxicological studies of the compound. Fenvalarate is stabilized by intermolecular C-H…O, C-H…Cl, C-H…π and C-H…N interactions which are responsible for the stability of the compound and its interaction with the Actin. The crystallographic coordinates of the compound was extrapolated to docking studies to elucidate the action of fenvalarate against neural cytoskeletal protein of insect and mammalian ß-actin. A strong affinity was observed in binding of fenvalarate with insect ß-actin (-7.71kcal/mol, Ki = 2.23µM) indicating it as a potent insecticide and moderate toxicity towards mammalian ß-actin (-7.07kcal/mol, Ki=6.54µM).

Novel oxidative electrophilic coupling reactions of phenoxazine derivatives with MBTH and their applications to spectrophotometric determination of residual chlorine in drinking water and environmental water samples.

Novel, sensitive and rapid spectrophotometric methods, using phenoxazine (PNZ), 2-chlorophe-noxazine (CPN) and 2-trifluoromethylphenoxazine (TPN) as chromogenic reagents for the determination of residual chlorine are proposed. The methods are based on the reduction of chlorine by an electrophilic coupling reagent, 3-methyl-2-benzothiazoline hydrazono hydrochloride hydrate (MBTH) in mild hydrochloric acid medium and subsequent coupling with PNZ, CPN or TPN. The blue color formed in the reaction showed maximum absorbance at 680-690 nm and obeyed Beer's law over the range 0.1-2.2 microg ml(-1). The molar absorptivity values with PNZ, CPN and TPN were 2.80 x 10(4), 2.67 x 10(4) and 1.91 x 10(4) l mol(-1)cm(-1) and Sandell's sensitivity values were 0.028, 0.027 and 0.028 microg cm(-2) respectively. The proposed methods were successfully applied in the determination of residual chlorine in drinking water and environmental water samples. The performance of proposed methods was evaluated in terms of Student's t-test and variance ratio F-test which indicated the significance of proposed methods over the standard spectrophotometric method.

Novel oxidative coupling reactions of cisapride or metaclopramide with phenoxazines and their applications in the determination of nitrite at trace level in environmental samples.

Phenoxazine (PNZ), 2-chlorophenoxazine (CPN) and 2-trifluoromethylphenoxazine (TPN) were used as new class of spectrophotometric reagents for the determination of nanoamounts of nitrite in presence of cisapride (CSP) and metaclopramide (MCP) as new electrophilic coupling reagents. The methods were based on the oxidation of CSP or MCP by nitrite in hydrochloric acid medium and coupling with PNZ, CPN or TPN to yield red color derivatives which were stable for about 3h and having an absorbance maximum in the range 520-530 nm. Beer's law is obeyed for nitrite in the concentration range 0.08-0.80 and 0.13-1.60 microg ml(-1) for phenoxazine-cisapride and phenoxazine-metaclopramide, respectively. The optimum reaction conditions and other important analytical parameters were established to enhance the sensitivity of these methods. Interference due to various non-target ions was also investigated. The methods were applied to the analysis of nitrite in environmental samples. The performance of proposed methods were evaluated by Student's t-test and variance ratio F-test indicated the significance of proposed methods over the reference spectrophotometric method (Association of Official Analytical Communities (AOAC) method for the determination of nitrite in water samples).

Novel reactions for simple and sensitive spectrophotometric determination of nitrite.

Nine spectrophotometric methods based on new reactions for the determination of tracer amounts of nitrite in environmental samples were developed. Replacement of toxic reagents was explored to attain the standards of clean chemistry. These methods utilize two classes of compounds namely; phenoxazines and sulphonamides, the well established drugs in the presence of limited amounts of hydrochloric acid. The methods were based on the oxidation of sulfanilamide (SAA), sulfadoxine (SDX) or sulfamethoxazole (SMX) by nitrite in hydrochloric acid medium and coupling with phenoxazine (PNZ), 2-chlorophenoxazine (CPN) or 2-trifluoromethylphenoxazine (TPN) which yielded red colored derivatives having an absorbance maximum in the range 530-540nm and were stable for about 4h. Beer's law was obeyed for nitrite in the concentration range 0.13-1.60mugmL(-1). The reaction conditions and other important analytical parameters were optimized to enhance the sensitivity of the methods. Interference if any, by non-target ions was also investigated. The methods were applied determining nitrite in environmental samples. The performance of these methods were evaluated in terms of Student's t-test and variance ratio F-test to find out the significance of proposed methods over the reference spectrophotometric method.

2,2'-Bipyridine as a new and sensitive spectrophotometric reagent for the determination of nanoamounts of certain dibenzazepine class of tricyclic antidepressant drugs.

2,2'-bipyridine is proposed as new and sensitive spectrophotometric reagent for the determination of certain dibenzazepine class of tricyclic antidepressants. The spectrophotometric method is based on the reaction of imipramine hydrochloride (IPH), desipramine hydrochloride (DPH), clomipramine hydrochloride (CPH), trimipramine maleate (TPM) and opipramol (OPP) with iron (III) and subsequent reaction with 2,2'-bipyridine in an acetic acid medium to yield a pink color with maximum absorption at 530 nm. The color developed was stable over 3-4 h at room temperature (approximately 27 degrees C). The commonly encountered excipients and additives did not interfere with the determination. Results from the analysis of pure drugs and commercial tablets agreed well with those of the official method (United States Pharmacopoeia, 24, USP Convention, Rockville 2000, pp. 505-506, 865-867.).

Selective recovery of gold from secondary sources by Dowex-50-X8 sorbed Rhodamine-B resin.

Gold recovery from spent materials has been performed on modified cation-exchange resin. The modified resin was prepared by sorption of Rhodamine-B on Dowex-50-X8 (Na+) resin at pH 2.0. Distribution coefficients of gold ion have been determined with 15% (w/v) potassium chloride in different concentrations of hydrochloric acid. On the basis of Kd values quantitative separation of gold from secondary sources has been achieved. Gold(III) has been selectively separated from gold containing spent materials by column chromatography using modified ionexchange resin and the recovery was more than 92% compared to conventional cyanidation process. The results of the proposed method are suggestive of its applicability to other gold containing secondary sources.