Metal Concentration Assessment in the Urine of Cigarette Smokers Who Switched to Electronic Cigarettes: A Pilot Study.

Background: E-cigarettes (ECs) seem to be a less harmful alternative for conventional cigarettes, however, very little is still known about the exposure to some elements, which are the components of this device and may contaminate the nicotine liquid. The aim of this study is to assess whether e-cigarette users are more exposed to 12 elements detected in aerosol than non-smokers and conventional cigarette smokers, using their concentrations in urine as exposure biomarkers. Methods: A cross-sectional, group-based survey was carried out using 90 volunteers classified into groups of non-smokers, EC-only users, dual EC users-cigarette smokers and cigarette-only smokers. Using inductively coupled plasma mass spectrometry (ICP-MS) and electrothermal atomic absorption spectrometry (ETAAS), Cr, Ni, Co, Ag, In, Mn, Ba, Sr, V, Sb, Cd and Pb levels were measured in spot urine samples. Among the selected groups, a comparison was made using the analysis of covariance and correlations with EC usage pattern were assessed by multiple linear regression. Results: Element concentrations in urine of EC-users were not significantly different from the levels found in non-smokers and smokers. Only in the case of Ba, Ni and Sb was a significant correlation found in relation to some e-cigarette usage patterns. Conclusion: Transfer of the investigated elements to the EC aerosol was not found to be a substantial source of exposure in EC users who quitted smoking.

A method of mercury removal from topsoil using low-thermal application.

Mercury contamination in the environment is problematic due to the unusual physical properties and well-recognized toxicity of this common metal. The bioavailability of mercury depends strongly on its chemical speciation. Anthropogenic mercury and its compounds appear in soil as "hot spots" located close to industrial facilities that used or produced mercury. The nature of the chemical production process, transportation and disposal practices often determined the chemical composition and distribution of mercury in the surrounding soils. Current ex situ soil remediation methods are expensive, produce undesirable side effects to the environment and usually involve transportation of contaminated soil. In this project, sponsored by the U.S. Department of Energy, a low-cost, simple approach to removing mercury from soil was evaluated. The process uses low-temperature thermal desorption of volatile metallic mercury and its compounds, and subsequent vapor capture. The project consisted of laboratory and plot-scale experiments. The laboratory efforts evaluated theoretical calculations of mercury removal as a function of time and temperature. The plot-scale experiment was a practical application of the laboratory results. For both experiments, mercury-polluted soil was obtained from a chemical production facility located in southern Poland. In laboratory experiments, at temperature 373 K total mercury concentration decreased in soil by nearly 32%. In plot-scale experiments, at temperature 440 K, about 60-70% of total mercury was removed from the soil. At the end of the experiment, a test of soil biological activity was performed to check if the high temperature applied to the soil did not impair the soil growth properties. There was no negative effect of temperature found.

Human health risk assessment case study: an abandoned metal smelter site in Poland.

United States Environmental Protection Agency methodologies for human health risk assessment (HRA) were applied in a Brownfields Demonstration Project on the Warynski smelter site (WSS), an abandoned industrial site at Piekary Slaskie town, Upper Silesia, Poland. The HRA included the baseline risk assessment (BRA) and the development of risk-based preliminary remedial goals (RBPRGs). The HRA focused on surface area covered with waste materials, which were evaluated with regard to the potential risks they may pose to humans. Cadmium, copper, iron, manganese, lead, and zinc were proposed as the contaminants of potential concern (COPCs) at WSS based on archive data on chemical composition of waste located on WSS. For the defined future land use patterns, the industrial (I) and recreational (II) exposure scenarios were assumed and evaluated. The combined hazard index for all COPCs was 3.1E+00 for Scenario I and 3.2E+00 for Scenario II. Regarding potential carcinogenic risks associated with the inhalation route, only cadmium was a contributor, with risks of 1.6E-06 and 2.6E-07 for Scenario I and Scenario II, respectively. The results of the BRA indicated that the potential health risks at WSS were mainly associated with waste material exposure to cadmium (industrial and recreational scenarios) and lead (industrial scenario). RBPRGs calculated under the industrial scenario were 1.17E+03 and 1.62E+03 mg/kg for cadmium and lead, respectively. The RBPRG for cadmium was 1.18E+03 mg/kg under the recreational scenario. The BRA results, as well as RBCs, are comparable for both scenarios, so it is impossible to prioritize land use patterns for WSS based on these results. For choosing a future land use pattern or an appropriate redevelopment option, different factors would be decisive in the decision-making process, e.g., social, market needs, technical feasibility and costs of redevelopment actions or acceptance of local community.