Optimal Plate Choice for High-Neck Mandibular Condyle Fracture: A Mechanistic Analysis of 16 Options.

(1) Background: Mandibular fractures are common, with the condylar process being a frequent site of injury, accounting for 25-45% of cases. This research aims to assess the mechanical suitability of various plates for high-neck condyle fractures. (2) Methods: Polyurethane models mimicking high-neck condyle fractures were utilized in this study. Sixteen distinct plate designs, constructed from titanium sheets, were tested. The figures underwent force assessments on a durability testing apparatus, and the relationship between used force and fracture movement was documented. (3) Results: For high-neck breaking, the two straight plates emerged as the most effective, aligning with established osteosynthesis standards. The second-best plate exhibited nearly half the strength of the gold standard. (4) Conclusions: In response to the aim of this study, considering the mechanical aspects, the double plain plate stands out as the optimal choice for osteosynthesis in cases of high-neck fractures of the mandibular condylar process. In addition, the authors propose the Mechanical Excellence Factor (MEF) as a superior metric for appraising a plate's mechanical force, surpassing the conventional Plate Design Factor (PDF).

Oral cancer awareness among patients at 3 university hospitals in Poland and Germany: A survey research.

BACKGROUND: The epidemic of cancer (including oral cancer) is a growing public health and economic problem in the European societies. A high percentage of patients who come for the appropriate treatment are in the late stages of advancement, often with nodal and/or distant metastases. The literature on the public oral cancer awareness in Poland and Germany is limited. OBJECTIVES: To investigate the levels of public awareness about the early symptoms and risk factors of oral cancer, and to analyze the findings in the context of the socioeconomic profiles of the subjects. MATERIAL AND METHODS: The survey consisted of a 20-item questionnaire divided into 4 sections: socioeconomic and demographic factors, the awareness of oral cancer, symptoms of oral cancer, and its risk factors. It was distributed to 465 adult patients in Poland (Wroclaw and Lódz) and Germany (Dresden). RESULTS: The response rate was 97.6%. Most of the respondents (65.4%) had heard of oral cancer. The sources of information were mainly the traditional mass media and the Internet, with only 23.8% of the respondents indicating doctors as a source of information about oral cancer. What is worrying, only about 1/5 of the participants in each of the 3 centers had an oral cancer examination last year. The awareness of oral cancer correlated positively with the age of the respondents and negatively with the size of the place of residence. Education level had no significant impact on declared knowledge. CONCLUSIONS: The results of this survey do not only show unsatisfactory levels of patients' awareness of the risk factors and symptoms of oral cancer but also emphasize the need to improve the level of healthcare concerning this disease, including screening programs.

Protocol for Multi-Stage Treatment of Temporomandibular Joint Ankylosis in Children and Adolescents.

Treatment of temporomandibular ankylosis is challenging and frequently leads to re-ankylosis, relapse, dangerous complications and, in turn, the need for multiple operations. In this article, we present a protocol for the treatment of ankylosis of the temporomandibular joints that assumes earlier intervention with the assistance of 3D virtual surgical planning (3DVSP) and custom biomaterials for better and safer surgical outcomes. Thirty-three patients were treated due to either uni- or bilateral temporomandibular ankylosis. Twenty individuals received temporomandibular prosthesis, whereas seventeen required simultaneous 3D virtual surgical/planned orthognathic surgery as the final correction of the malocclusion. All patients exhibited statistically significant improvements in mouth opening (from 1.21 ± 0.74 cm to 3.77 ± 0.46 cm) and increased physiological functioning of the mandible. Gap arthroplasty and aggressive rehabilitation prior to temporomandibular prosthesis (TMJP) placement were preferred over costochondral autografts. The use of 3DVSP and custom biomaterials enables more precise, efficient and safe procedures to be performed in the paediatric and adolescent population requiring treatment for temporomandibular ankylosis.

Influence of General Mineral Condition on Collagen-Guided Alveolar Crest Augmentation.

The local regeneration of bone defects is regulated by general hormone, enzyme, ion, and vitamin levels. General diseases and dysregulation of the human mineral system can impact this process, even in alveolar crest. The aim of this study is to investigate a relation between bone density, measured in two-dimensional X-rays, and general mineral condition of patients. The study included 42 patients on whom tooth extractions were performed. Data were divided into two groups: the region where collagen scaffold (BRM) was used and the reference region of intact normal bone (REF). Two-dimensional intraoral radiographs were taken in all cases just after the surgery (00 M) and 12 months later (12 M). Thyrotropin (TSH), parathormone (PTH), Ca2+ in serum, HbA1c, vitamin 25(OH)D3, and spine densitometry were checked. Digital texture analysis in MaZda 4.6 software was done. Texture Index (TI: BRM 1.66 ± 0.34 in 00 M, 1.51 ± 0.41 in 12 M, and REF 1.72 ± 0.28) and Bone Index (BI: BRM 0.73 ± 0.17 in 00 M, 0.65 ± 0.22 41 in 12 M, and REF 0.80 ± 0.14) were calculated to evaluate bone regeneration process after 12 months of healing (TI (p < 0.05) and BI (p < 0.01) are lower in BRM 12 M than in REF). This showed a relation between BI and TSH (R2 = 26%, p < 0.05), as well as a between BI and patient age (R2 = 65%, p < 0.001), and a weak relation between TI and TSH level (R2 = 10%, p < 0.05). This study proved that a collagen scaffold can be successfully used in alveolar crest regeneration, especially in patients with a high normal level of TSH in the middle-aged population.

Alterations of upper airway volume caused by Le Fort III osteodistraction in children.

PURPOSE: The aim of the study was to assess changes in the upper respiratory tract and sleep quality in patients who were suffering from midfacial hypoplasia and treated with the movement of underdeveloped middle segment of the face with an Le Fort III osteotomy and distraction. METHODS: In this study patients aged 7-19, suffering from Crouzon syndrome, Apert syndrome, or other craniosynostosis were treated with Le Fort III osteotomy and midface distraction. Patients were subjected to radiological examination and polysomnography before and after the treatment. Typical anthropometric points were identified on lateral cephalograms, and were used to take linear and angular measurements. The surface and the volume of the upper respiratory tract were measured with the Dolphin Imaging software. Apnoea Hypopnea Index (AHI) was used to assess the sleep quality. RESULTS: In all 18 patients the analysis showed statistically significant changes of the AHI and in the linear, angular and volumetric measurements. Mean change of the volume of the upper respiratory tract was 12,4 ± 11,3cm3(p = 0,0001) and of the surface was 615 ± 521 mm2 (p = 0,0000000002). Mean improvement of AHI was 9 ± 6,2 (p = 0,00006). In three cases patients had tracheostomy prior to operation and none of them required tracheostomy after the operation. CONCLUSIONS: The use of distraction osteogenesis of the middle segment of the face combined with Le Fort III osteotomy results in dilation of the upper respiratory tract at the nasopharyngeal level and at the soft palate level resulting in elimination of sleep and respiration disorders. Further studies with polysomnography are necessary, as well as observation of patients over time and monitoring of treatment stability.

Two different techniques of manufacturing TMJ replacements - A technical report.

INTRODUCTION: Presently, during the surgical treatment of the patients in maxillofacial surgery, one can use various medical implants. Moreover custom made implants are being used. Replacements may be fitted to the structure and shape of the human skull owing to CAD/CAM (custom aided design/manufacture) called customized implants. This study was aimed to report for the first time clinical material from which custom implants, using two different techniques, were manufactured to reconstruct the temporomandibular joint (TMJ). MATERIAL AND METHODS: In this study, eleven patients with an average age of 54 years were included. All of the patients underwent TMJ reconstruction using direct metal laser sintering (DMLS) or computer numerical control milling (CNC) techniques for implant manufacture. Four of the eleven patients had a malignancy diagnosis, and seven had a benign diagnosis. Patients complained of hypomobility of the TMJ, facial asymmetry, pain and swelling of the preauricular region. Treatment included 7 CNC milled implants and 4 implants in DMLS. RESULTS: More metallic implant parts with a rough surface were associated with the DMLS technique. Post operational, uneventful healing was observed in all clinical cases during an average of 26.8 months of follow-up. Three months post-operation, facial nerve palsy, swallowing disturbances and pain were not observed. Infections, allergic reactions to materials and re-ankylosis were also not observed. Replacements received correct forms and functions owing to the CAM techniques. Post-operational maximal interincisal opening improved (p < 0.01) and was not significantly related to preoperational opening, age, sex, diagnosis or adjuvant radiotherapy. CONCLUSION: Considering both methods, the feature that differentiates the manufacture technique is the more subtractive surface finishing required for the DMLS implant than the CNC implant. Both techniques resulted the same clinical outcomes and can be used successfully in patients with neoplastic lesions and other TMJ disorders. Unfortunately, DMLS is more vulnerable to fracture.

Accuracy of open-source software segmentation and paper-based printed three-dimensional models.

In this study, we aimed to verify the accuracy of models created with the help of open-source Slicer 3.6.3 software (Surgical Planning Lab, Harvard Medical School, Harvard University, Boston, MA, USA) and the Mcor Matrix 300 paper-based 3D printer. Our study focused on the accuracy of recreating the walls of the right orbit of a cadaveric skull. Cone beam computed tomography (CBCT) of the skull was performed (0.25-mm pixel size, 0.5-mm slice thickness). Acquired DICOM data were imported into Slicer 3.6.3 software, where segmentation was performed. A virtual model was created and saved as an .STL file and imported into Netfabb Studio professional 4.9.5 software. Three different virtual models were created by cutting the original file along three different planes (coronal, sagittal, and axial). All models were printed with a Selective Deposition Lamination Technology Matrix 300 3D printer using 80 gsm A4 paper. The models were printed so that their cutting plane was parallel to the paper sheets creating the model. Each model (coronal, sagittal, and axial) consisted of three separate parts (∼200 sheets of paper each) that were glued together to form a final model. The skull and created models were scanned with a three-dimensional (3D) optical scanner (Breuckmann smart SCAN) and were saved as .STL files. Comparisons of the orbital walls of the skull, the virtual model, and each of the three paper models were carried out with GOM Inspect 7.5SR1 software. Deviations measured between the models analysed were presented in the form of a colour-labelled map and covered with an evenly distributed network of points automatically generated by the software. An average of 804.43 ± 19.39 points for each measurement was created. Differences measured in each point were exported as a .csv file. The results were statistically analysed using Statistica 10, with statistical significance set at p < 0.05. The average number of points created on models for each measurement was 804.43 ± 19.39; however, deviation in some of the generated points could not be calculated, and those points were excluded from further calculations. From 94% to 99% of the measured absolute deviations were <1 mm. The mean absolute deviation between the skull and virtual model was 0.15 ± 0.11 mm, between the virtual and printed models was 0.15 ± 0.12 mm, and between the skull and printed models was 0.24 ± 0.21 mm. Using the optical scanner and specialized inspection software for measurements of accuracy of the created parts is recommended, as it allows one not only to measure 2-dimensional distances between anatomical points but also to perform more clinically suitable comparisons of whole surfaces. However, it requires specialized software and a very accurate scanner in order to be useful. Threshold-based, manually corrected segmentation of orbital walls performed with 3D Slicer software is accurate enough to be used for creating a virtual model of the orbit. The accuracy of the paper-based Mcor Matrix 300 3D printer is comparable to those of other commonly used 3-dimensional printers and allows one to create precise anatomical models for clinical use. The method of dividing the model into smaller parts and sticking them together seems to be quite accurate, although we recommend it only for creating small, solid models with as few parts as possible to minimize shift associated with gluing.

Accuracy of three-dimensional, paper-based models generated using a low-cost, three-dimensional printer.

Our study aimed to determine the accuracy of a low-cost, paper-based 3D printer by comparing a dry human mandible to its corresponding three-dimensional (3D) model using a 3D measuring arm. One dry human mandible and its corresponding printed model were evaluated. The model was produced using DICOM data from cone beam computed tomography. The data were imported into Maxilim software, wherein automatic segmentation was performed, and the STL file was saved. These data were subsequently analysed, repaired, cut and prepared for printing with netfabb software. These prepared data were used to create a paper-based model of a mandible with an MCor Matrix 300 printer. Seventy-six anatomical landmarks were chosen and measured 20 times on the mandible and the model using a MicroScribe G2X 3D measuring arm. The distances between all the selected landmarks were measured and compared. Only landmarks with a point inaccuracy less than 30% were used in further analyses. The mean absolute difference for the selected 2016 measurements was 0.36 ± 0.29 mm. The mean relative difference was 1.87 ± 3.14%; however, the measurement length significantly influenced the relative difference. The accuracy of the 3D model printed using the paper-based, low-cost 3D Matrix 300 printer was acceptable. The average error was no greater than that measured with other types of 3D printers. The mean relative difference should not be considered the best way to compare studies. The point inaccuracy methodology proposed in this study may be helpful in future studies concerned with evaluating the accuracy of 3D rapid prototyping models.

Comparison of pre-bent titanium mesh versus polyethylene implants in patient specific orbital reconstructions.

INTRODUCTION: Computerized tomography DICOM file can be relatively easily transformed to a virtual 3D model. With the help of additional software we are able to create the mirrored model of an undamaged orbit and on this basis produce an individual implant for the patient Authors decided to apply implants with any thickness, which are authors own invention to obtain volumetric support and more stable orbital wall reconstruction outcome. Material of choice was ultra-high molecular weight polyethylene (UHMWPE). OBJECTIVE: The aim of this study was to present and compare functional results of individual reconstructions of orbital wall using either titanium mesh or ultra-high molecular weight polyethylene. MATERIALS AND METHODS: 57 consecutive patients affected by orbital wall fracture (46 males, 11 females, mean age 34±14 year) were treated in Department of Maxillofacial Surgery from 2010 to 2012. In the first group we used patient specific treatment by titanium mesh shaped on a 3D printed model of a mirrored intact orbit (37 orbits) or by individually manufactured UHMW-PE implantby CAM milling in second group (20 orbits). All of these patients were subjected to preoperative helical computerized tomography and consultation of an ophthalmologist (including binocular single vision loss test - BSVL). Further on, patients were operated under general anaesthesia using transconjuctival approach. BSVL was again evaluated post-operationally in 1 month and 6 months later. RESULTS: Functional treatment results (BSVL) for both groups were similar in 1 month as well as 6 months post operational time. There was no statistically significant difference between these two groups. CONCLUSIONS: This study of 6 months functional result assessment of pre-bent individual implants and CNC milled ultra-high molecular weight polyethylene of the orbital wall has shown it to be a predictable reconstruction method. Individually shaped UHMWPE seems to be as good as pre-bent titanium mesh.