Improved On-Site Characterization of Arsenic in Gypsum from Waste Plasterboards Using Smart Devices.

The impurities in waste plasterboards, a product of ethical demolition, are a serious problem for their recycling. Plasterboards, the wall materials used in old buildings, are often recycled into gypsum powder for various applications, including ground stabilization. However, this powder contains various chemical impurities from the original production process of the gypsum itself, and such impurities pose a risk of polluting the surrounding soil. Here, we present a simple method for verifying the presence of arsenic, a harmful element in recycled gypsum that is suitable for use at demolition sites. First, we developed a simple pretreatment method using a cation-exchange resin to dissolve insoluble gypsum suspended in water by exploiting a chemical equilibrium shift, and we estimated the quantity suitable for releasing the arsenic from arsenic-containing gypsum. This pretreated solution could then be tested with a conventional arsenic test kit by observing the color changes in the test paper using the image sensor of a smart device. This simple method could determine a wide range of arsenic quantities in the gypsum, which would be helpful for monitoring arsenic in recycled gypsum powder, thereby supporting the development of a safe circular economy for waste plasterboards.

Simple and high-sensitivity colorimetric analysis of cadmium using homogeneous liquid-liquid extraction.

Colorimetric determination with dithizone (diphenylthiocarbazone) is a simple method that has been applied to analyze cadmium (Cd) ions in water. However, determining concentrations close to the environmental standard value (3 µgL-1) using this method is difficult because of its low sensitivity. Herein, we exploited the phase separation phenomenon to generate a small amount of the extraction phase by adding a mixture of 2-propanol and a small amount of chloroform to a water sample, as a pre-concentration method for the Cd(II) ions. The obtained Cd(II)-dithizone complex was successfully extracted into this phase. We then constructed a simple and highly sensitive colorimetric analysis method for the ppb level of Cd(II) using this phase separation technique.

Repeated Heat Regeneration of Bone Char for Sustainable Use in Fluoride Removal from Drinking Water.

The effectiveness of regenerated chicken bone char (CBC) in fluoride removal was investigated in the present study. Heat treatment was studied as the regeneration method. Results revealed that the CBC regenerated at 673 K yielded the highest fluoride adsorption capacity, hence, 673 K was the best regenerating temperature. The study continued up to five regeneration cycles at the best regenerating temperature; 673 K. The CBC accounted to 16.1 mg F/g CBC as the total adsorption capacity after five regeneration cycles. The recovery percentage of CBC reduced from 79% at the first regeneration to 4% after five regeneration cycles. The hydroxyapatite structure of CBC was not changed during the fluoride adsorption by five regeneration cycles. The ion exchange incorporated with the chemical precipitation occurred during the fluoride adsorption. The repeated regeneration of CBC is possible and it could be used as a low cost defluoridation technique to minimize the wastage of bone char.

The Extremely High Adsorption Capacity of Fluoride by Chicken Bone Char (CBC) in Defluoridation of Drinking Water in Relation to Its Finer Particle Size for Better Human Health.

The ingestion of fluoride-contaminated water causes serious health issues in people all over the world. In the current study, the adsorption of fluoride onto chicken bone char (CBC) was investigated as a defluoridation technique. Finer-sized CBC with a diameter of 106⁻212 µm was used to investigate the fluoride adsorption capacity onto CBC. Results revealed that finer-sized CBC yielded an unusually high fluoride adsorption capacity of 11.2 mg/g at the equilibrium fluoride concentration of 10 mg/L. The study shows that CBC can be utilized in the defluoridation of drinking water and that finer-sized CBC enhances ion exchange to perform a higher adsorption capacity.

Amine/Hydrido Bifunctional Nanoporous Silica with Small Metal Nanoparticles Made Onsite: Efficient Dehydrogenation Catalyst.

Multifunctional catalysts are of great interest in catalysis because their multiple types of catalytic or functional groups can cooperatively promote catalytic transformations better than their constituents do individually. Herein we report a new synthetic route involving the surface functionalization of nanoporous silica with a rationally designed and synthesized dihydrosilane (3-aminopropylmethylsilane) that leads to the introduction of catalytically active grafted organoamine as well as single metal atoms and ultrasmall Pd or Ag-doped Pd nanoparticles via on-site reduction of metal ions. The resulting nanomaterials serve as highly effective bifunctional dehydrogenative catalysts for generation of H2 from formic acid.

Grafted Polymethylhydrosiloxane on Hierarchically Porous Silica Monoliths: A New Path to Monolith-Supported Palladium Nanoparticles for Continuous Flow Catalysis Applications.

Polymethylhydrosiloxane has been grafted on the surface of a hierarchically porous silica monolith using a facile catalytic reaction between Si-H and silanol to anchor the polymer. This easy methodology leads to the functionalization of the surface of a silica monolith, where a large amount of free Si-H bonds remain available for reducing metal ions in solution. Palladium nanoparticles of 15 nm have been synthesized homogeneously inside the mesopores of the monolith without any stabilizers, using a flow of a solution containing Pd2+. This monolith was used as column-type fixed bed catalyst for continuous flow hydrogenation of styrene and selective hydrogenation of 3-hexyn-1-ol, in each case without a significant decrease of the catalytic activity after several hours or days. Conversion, selectivity, and stereoselectivity of the alkyne hydrogenation can be tuned by flow rates of hydrogen and the substrate solution, leading to high productivity (1.57 mol g(Pd)-1 h-1) of the corresponding cis-alkene.