Improvement of the rate capability of all-solid-state cells with Fe-based polysulfide positive electrode materials by modifying the microstructure.

We successfully prepared an Fe- and Li-containing polysulfide positive electrode material (Li8FeS5-Li2FeS2 composite) that shows a high specific capacity (>500 mA h g-1) with improved rate capability in all-solid-state cells. High-resolution TEM analysis indicated the coexistence of small crystallites of high-conductivity Li2FeS2 and FeS, as well as low-crystallinity Li2S, in the composite, and this microstructure is responsible for the improved battery performance.

Experimental study platform for electrocatalysis of atomic-level controlled high-entropy alloy surfaces.

High-entropy alloys (HEAs) have attracted considerable attention to improve performance of various electrocatalyst materials. A comprehensive understanding of the relationship between surface atomic-level structures and catalytic properties is essential to boost the development of novel catalysts. In this study, we propose an experimental study platform that enables the vacuum synthesis of atomic-level-controlled single-crystal high-entropy alloy surfaces and evaluates their catalytic properties. The platform provides essential information that is crucial for the microstructural fundamentals of electrocatalysis, i.e., the detailed relationship between multi-component alloy surface microstructures and their catalytic properties. Nanometre-thick epitaxially stacking layers of Pt and equi-atomic-ratio Cr-Mn-Fe-Co-Ni, the so-called Cantor alloy, were synthesised on low-index single-crystal Pt substrates (Pt/Cr-Mn-Fe-Co-Ni/Pt(hkl)) as a Pt-based single-crystal alloy surface model for oxygen reduction reaction (ORR) electrocatalysis. The usefulness of the platform was demonstrated by showing the outperforming oxygen reduction reaction properties of high-entropy alloy surfaces when compared to Pt-Co binary surfaces.

Honeycomb-Layered Oxides With Silver Atom Bilayers and Emergence of Non-Abelian SU(2) Interactions.

Honeycomb-layered oxides with monovalent or divalent, monolayered cationic lattices generally exhibit myriad crystalline features encompassing rich electrochemistry, geometries, and disorders, which particularly places them as attractive material candidates for next-generation energy storage applications. Herein, global honeycomb-layered oxide compositions, Ag2 M2 TeO6 ( M = Ni , Mg , etc $M = \rm Ni, Mg, etc$ .) exhibiting Ag $\rm Ag$ atom bilayers with sub-valent states within Ag-rich crystalline domains of Ag6 M2 TeO6 and Ag $\rm Ag$ -deficient domains of Ag 2 - x Ni 2 TeO 6 ${\rm Ag}_{2 - x}\rm Ni_2TeO_6$ ( 0 < x < 2 $0 < x < 2$ ). The Ag $\rm Ag$ -rich material characterized by aberration-corrected transmission electron microscopy reveals local atomic structural disorders characterized by aperiodic stacking and incoherency in the bilayer arrangement of Ag $\rm Ag$ atoms. Meanwhile, the global material not only displays high ionic conductivity but also manifests oxygen-hole electrochemistry during silver-ion extraction. Within the Ag $\rm Ag$ -rich domains, the bilayered structure, argentophilic interactions therein and the expected Ag $\rm Ag$ sub-valent states ( 1 / 2 + , 2 / 3 + $1/2+, 2/3+$ , etc.) are theoretically understood via spontaneous symmetry breaking of SU(2)× U(1) gauge symmetry interactions amongst 3 degenerate mass-less chiral fermion states, justified by electron occupancy of silver 4 d z 2 $4d_{z^2}$ and 5s orbitals on a bifurcated honeycomb lattice. This implies that bilayered frameworks have research applications that go beyond the confines of energy storage.

Spectrum imaging measurements with semi-parallel detection using an AES apparatus.

We have developed a method to obtain a data cube using a semi-parallel detection scheme and an electrostatic hemispherical analyzer (HSA) with multi-channel detection. By improving the Auger intensity map measurement scheme, the number of detector energy sweeps is reduced, and faster measurement is achieved. The gain differences among the detection channel are corrected by post-processing, and a data cube of Auger electron spectra is constructed. A data cube was obtained for an example of a sample with a non-flat surface, lead-free solder. It was demonstrated to be possible to extract spectra from any position within the measurement area and create the elemental distribution maps.

Interfacing with Fe-N-C Sites Boosts the Formic Acid Dehydrogenation of Palladium Nanoparticles.

Hierarchical micro-/mesoporous carbons with abundant Fe-N-C sites were prepared through one-step carbonization of a metal-organic framework (MOF) with sodium iron ethylenediaminetetraacetic acid [NaFe(III)EDTA], which can facilitate the nucleation and growth of ultrafine (∼1.4 nm) and highly dispersed palladium nanoparticles (Pd NPs). Interfacing Pd NPs with Fe-N-C sites has been demonstrated for the first time to boost the heterogeneous catalysis of hydrogen production from formic acid, affording an ultrahigh turnover frequency (TOF) value of 7361 h-1 at 323 K. The robust synergistic interactions between Pd NPs and Fe-N-C sites together with the small size effects of Pd NPs are responsible for the enhanced catalytic activity.

New insight derived from a two-compartment cell: electrochemical behavior of FeF3 positive electrode.

A designed two-compartment cell was applied to the degradation analysis of FeF3 having high theoretical energy density. Comparing with the result of the coin cell, the two-compartment cell gave us insight that the elution of Fe was responsible for the degradation of FeF3 and LiDFOB was found as an essentially effective additive for suppressing the degradation of FeF3.

Comparison of Stabilizer Effects on the Size, Dispersion, and Catalytic Property of Pt, PtCu, and PtRu Nanoparticles.

Carbon-supported Pt, Pt-Cu, and Pt-Ru nanoparticles were prepared by an alcohol reduction method in the presence of carboxylates and phosphinate in order to investigate the role of these stabilizers in the nanoparticle formation process and the effect on catalytic properties in 2-propanol oxidation. For the Pt-Cu system, long chain carboxylate gave small dispersed particles even with high metal loading while phosphinate gave aggregated particles. For the Pt and Pt-Ru systems, fewer aggregates were observed and the particle size was independent of the chain length of carboxylate while much smaller and dispersed particles were obtained with phosphinate. Phosphinate mainly prevents metal crystal growth while carboxylates prevent both crystal growth and formation of aggregated particles. Although surface poisoning is severe on small dispersed particles in 2-propanol oxidation, dehydrogenation of 2-propanol at low potential is little affected. Phosphinate-protected catalysts were more tolerant to poisoning promoting 2-propanol electrooxidation at high potential range. The presence of Cu promoted 2-propanol electrooxidation at low potential range. These components made phosphinate-protected PtCu best perform in 2-propanol oxidation at 30 °C.

Study of the Hydrate-Melt/Li4Ti5O12 Interphase by Scanning Electron Microscopy-Based Spectroscopy.

To develop safe and low-cost Li-ion batteries (LIBs), recently, an aqueous-based electrolyte so-called "hydrate-melt" (HDM) electrolyte is proposed. Li4Ti5O12 is a promising negative electrode material for a LIB with such a HDM electrolyte because of its unexpected reversible Li insertion and extraction properties without usually inevitable water reduction. The solid-electrolyte interphase formation is one of the reasons for this stable reaction, although a detailed analysis is not yet performed. Here, a Li4Ti5O12 electrode surface reacted in a HDM electrolyte is investigated by scanning electron microscopy-based analysis. Surface reaction products are clearly observed on the Li4Ti5O12 surface after the Li insertion reaction in a HDM electrolyte. Energy-dispersive X-ray spectroscopy and Auger electron spectroscopy indicated that the products do not contain any components originated from Li salts, whereas anion-derived passivation films seem to cover a bare surface below the products. Further, the surface products are identified as Li2O by the feature of Li-K-edge reflection electron energy-loss spectrum. The Li2O formation would be one of the key issues for stable Li insertion and extraction of a Li4Ti5O12 electrode in a HDM electrolyte.

Si-Doping Effects in Cu(In,Ga)Se2 Thin Films and Applications for Simplified Structure High-Efficiency Solar Cells.

We found that elemental Si-doped Cu(In,Ga)Se2 (CIGS) polycrystalline thin films exhibit a distinctive morphology due to the formation of grain boundary layers several tens of nanometers thick. The use of Si-doped CIGS films as the photoabsorber layer in simplified structure buffer-free solar cell devices is found to be effective in enhancing energy conversion efficiency. The grain boundary layers formed in Si-doped CIGS films are expected to play an important role in passivating CIGS grain interfaces and improving carrier transport. The simplified structure solar cells, which nominally consist of only a CIGS photoabsorber layer and a front transparent and a back metal electrode layer, demonstrate practical application level solar cell efficiencies exceeding 15%. To date, the cell efficiencies demonstrated from this type of device have remained relatively low, with values of about 10%. Also, Si-doped CIGS solar cell devices exhibit similar properties to those of CIGS devices fabricated with post deposition alkali halide treatments such as KF or RbF, techniques known to boost CIGS device performance. The results obtained offer a new approach based on a new concept to control grain boundaries in polycrystalline CIGS and other polycrystalline chalcogenide materials for better device performance.

Pressure-Stabilized Cubic Perovskite Oxyhydride BaScO2H.

We report a scandium oxyhydride BaScO2H prepared by solid state reaction under high pressure. Rietveld refinements against powder synchrotron X-ray and neutron diffraction data revealed that BaScO2H adopts the ideal cubic perovskite structure (Pm3̅m), where oxide (O2-) and hydride (H-) anions are disordered. 1H nuclear magnetic resonance (NMR) spectroscopy provides a positive chemical shift of about +4.4 ppm, which can be understood by the distance to the nearest (and possibly the next nearest) cation from the H nucleus. A further analysis of the NMR data and calculations based on ab initio random structure searches suggest a partial cis preference in ScO4H2 octahedra. The present oxyhydride, if compositionally or structurally tuned, may become a candidate for H- conductors.