Double-Salts Super Concentrated Carbonate Electrolyte Boosting Electrochemical Performance of Ni-Rich LiNi0.90Co0.05Mn0.05O2 Lithium Metal Batteries.

Current lithium-ion batteries cannot meet the requirement of higher energy density with further large-scale application of electrical vehicles. Lithium metal batteries combined with Ni-rich layered oxides cathode are expected as the one of promising solutions, while the poor electrode and electrolyte interface impedes the commercial development of lithium metal batteries. A new double-salts super concentrated (DSSC) carbonate electrolyte is proposed to improve the electrochemical performance of LiNi0.90Co0.05Mn0.05O2 (NCM9055)||Li metal battery which exhibits stable cycling performance with the capacity retention of 93.04% and reversible capacity of 173.8 mAh g-1 after 100 cycles at 1 C, while cells with conventional 1 m diluted electrolyte remains only 60.55% and capacity of 114.2 mAh g-1. The double salts synergistic effect in super concentrated electrolyte promotes the formation for more balanced stable cathode electrolyte interface (CEI) inorganic compounds of CFx, LiNOx, SOF2, Li2SO4, and less LiF by X-ray photoelectron spectroscopy (XPS) test, and the uniform 2-3 nm rock-salt phase protection layer on the cathode surface by transmission electron microscope (TEM) characterization, improving the cycling performance of the Ni-rich NCM9055 layered oxide cathode. The DSSC electrolyte also can relief the Li dendrite growth on Li metal anode, as well as exhibit better flame retardance, promoting the application of more safety Ni-rich NCM9055||Li metal batteries.

A low-cost and eco-friendly recombinant protein expression system using copper-containing industrial wastewater.

The development of innovative methods for highly efficient production of recombinant proteins remains a prominent focus of research in the biotechnology field, primarily due to the fact that current commercial protein expression systems rely on expensive chemical inducers, such as isopropyl ß-D-thiogalactoside (IPTG). In our study, we designed a novel approach for protein expression by creating a plasmid that responds to copper. This specialized plasmid was engineered through the fusion of a copper-sensing element with an optimized multiple cloning site (MCS) sequence. This MCS sequence can be easily customized by inserting the coding sequences of target recombinant proteins. Once the plasmid was generated, it was introduced into an engineered Escherichia coli strain lacking copA and cueO. With this modified E. coli strain, we demonstrated that the presence of copper ions can efficiently trigger the induction of recombinant protein expression, resulting in the production of active proteins. Most importantly, this expression system can directly utilize copper-containing industrial wastewater as an inducer for protein expression while simultaneously removing copper from the wastewater. Thus, this study provides a low-cost and eco-friendly strategy for the large-scale recombinant protein production. To the best of our knowledge, this is the first report on the induction of recombinant proteins using industrial wastewater.

Asynchronous adaptive event-triggered fault detection for delayed Markov jump neural networks: A delay-variation-dependent approach.

This paper presents a delay-variation-dependent approach to fault detection of a discrete-time Markov jump neural network (MJNN) with a time-varying delay and mismatched modes. The goal is to detect the potential fault of delayed MJNNs by constructing an appropriate adaptive event-triggered and asynchronous H∞ filter. By choosing a delay-product-type Lyapunov-Krasovskii (L-K) functional with a delay-dependent matrix and exploiting some matrix polynomial inequalities, bounded real lemmas (BRLs) are obtained on the existence of suitable adaptive event generator and filters. These BRLs are dependent not only on the delay bounds but also on the delay variation rate. Simulation results are given to show the validity of the proposed theoretical method.

Spherical Shell with CNTs Network Structuring Fe-Based Alluaudite Na2+2 δ Fe2- δ (SO4 )3 Cathode and Novel Phase Transition Mechanism for Sodium-Ion Battery.

Iron-based sulfate cathodes of alluaudite Na2+2 δ Fe2- δ (SO4 )3 (NFS) in sodium-ion batteries with low cost, steady cycling performance, and high voltage are promising for grid-scale energy storage systems. However, the poor electronic conductivity and the limited understanding of the phase-evolution of precursors hinder obtaining high-rate capacity and the pure phase. Distinctive NFS@C@n%CNTs (n = 1, 2, 5, 10) sphere-shell conductive networks composite cathode materials are constructed creatively, which exhibit superior reversible capacity and rate performance. In detail, the designed NFS@C@2%CNTs cathode delivers an initial discharge capacity of 95.9 mAh g-1 at 0.05 C and up to 60 mAh g-1 at a high rate of 10 C. The full NFS@C@2%CNTs//HC cell delivers a practical operating voltage of 3.5 V and mass-energy density of 140 Wh kg-1 at 0.1 C, and it can also retain 67.37 mAh g-1 with a capacity retention rate of 96.4% after 200 cycles at 2 C. On the other hand, a novel combination reaction mechanism is first revealed for forming NFS from the mixtures of Na2 Fe(SO4 )2 ·nH2 O (n = 2, 4) and FeSO4 ·H2 O during the sintering process. The inspiring results would provide a novel perspective to synthesize high-performance alluaudite sulfate and analogs by aqueous methods.

Multi-Ion Engineering Strategies toward High Performance Aqueous Zinc-Based Batteries.

As alternatives to batteries with organic electrolytes, aqueous zinc-based batteries (AZBs) have been intensively studied. However, the sluggish kinetics, side reactions, structural collapse, and dissolution of the cathode severely compromise the commercialization of AZBs. Among various strategies to accelerate their practical applications, multi-ion engineering shows great feasibility to maintain the original structure of the cathode and provide sufficient energy density for high-performance AZBs. Though multi-ion engineering strategies could solve most of the problems encountered by AZBs and show great potential in achieving practical AZBs, the comprehensive summaries of the batteries undergo electrochemical reactions involving more than one charge carrier is still in deficiency. The ambiguous nomenclature and classification are becoming the fountainhead of confusion and chaos. In this circumstance, this review overviews all the battery configurations and the corresponding reaction mechanisms are investigated in the multi-ion engineering of aqueous zinc-based batteries. By combing through all the reported works, this is the first to nomenclate the different configurations according to the reaction mechanisms of the additional ions, laying the foundation for future unified discussions. The performance enhancement, fundamental challenges, and future developing direction of multi-ion strategies are accordingly proposed, aiming to further accelerate the pace to achieve the commercialization of AZBs with high performance.

Intrinsic Polarized Electric Field Induces a Storing Mechanism to Achieve Energy Storing Catalysis in V2 C MXene.

Efficient storage and separation of holes and electrons pose significant challenges for catalytic reactions, particularly in the context of single-phase catalysis. Herein, V2 C MXene, with its intrinsic polarized electric field, successfully overcomes this obstacle. To enhance hole storage, a multistep etching process is employed under reducing conditions to control the content of surface termination groups, thus exposing more defective active sites. The intrinsically polarized electric field confines holes to the surface of the layer and free electrons within the layer, leading to a lag in e- release compared to h+ . The quantities of stored holes and electrons are measured to be 18.13 µmol g-1 and 106.37 µmol g-1 , respectively. Under dark, V2 C demonstrates excellent and stable dark-catalytic performance, degrading 57.91% of tetracycline (TC 40 mg L-1 ) and removing 23% of total organic carbon (TOC) after 140 min. In simulated sunlight and near-infrared light, the corresponding degradation rates reach 72.24% and 79.54%, with corresponding TOC removal rates of 49% and 48%, respectively. The hole and electron induced localized surface plasmon resonance (LSPR) effects contribute to a long-lasting and enhanced broad-spectrum mineralization of V2 C MXene. This study provides valuable insights into the research and application of all-weather MXene energy storage catalytic materials.

Stability Analysis of Recurrent Neural Networks With Time-Varying Delay Based on a Flexible Negative-Determination Quadratic Function Method.

This brief investigates the stability problem of recurrent neural networks (RNNs) with time-varying delay. First, by introducing some flexibility factors, a flexible negative-determination quadratic function method is proposed, which contains some existing methods and has less conservatism. Second, some integral inequalities and the flexible negative-determination quadratic function method are used to give an accurate upper bound of the Lyapunov-Krasovskii functional (LKF) derivative. As a result, a less conservative stability criterion of delayed RNNs is derived, whose effectiveness and superiority are finally illustrated through two numerical examples.

Dual Localized Surface Plasmon Resonance effect enhances Nb2AlC/Nb2C MXene thermally coupled photocatalytic reduction of CO2 hydrogenation activity.

Nb2AlC/Nb2C MXene (NAC/NC) heterojunction photocatalysts with Schottky junctions were obtained by selective etching of the Al layer, resulting in 146.25 µmol·g-1 electrons and 15.28 µmol·g-1 holes stored in the heterojunction. The average conversion of NAC/NC thermally coupled photocatalytic reduction of CO2 under the simulated solar irradiation reached 110.15 µmol⋅g-1⋅h-1, and the CO selectivity reached over 92%, which was 1.49 and 1.74 times higher than that of pure Nb2AlC and Nb2C MXene, respectively. After light excitation, the localized surface plasmon resonance (LSPR) effect of holes distributed on the surface of Nb2C MXene crystals in the heterojunction will form high-energy thermal holes to dissociate H2 to H+ and reduce CO2 to form H2O at the same time. The high-energy electrons formed by the LSPR effect of Nb2C MXene and the conduction band electrons generated by the photoexcitation of Nb2C MXene can be migrated to Nb2AlC under the action of the interfacial Schottky junction to supplement the electrons needed for the LSPR effect of Nb2AlC, which continuously forms high-energy hot electrons to convert the adsorbed CO2 into *CO2-, b-HCO3, and HCOO. Subsequently, HCOO releases ⋅OH in a cyclic reaction to continuously reduce to form CO. The dual LSPR effect of Nb2AlC and Nb2C MXene is used to enhance the hydrogenation activity of thermally coupled photocatalytic reduction of CO2, which provides a new research idea for the application of MXene in thermally coupled photoreduction of CO2.

Benchmarking the Effect of Particle Size on Silicon Anode Materials for Lithium-Ion Batteries.

High-capacity silicon has been regarded as one of the most promising anodes for high-energy lithium-ion batteries. However, it suffers from severe volume expansion, particle pulverization, and repeated solid electrolyte interphase (SEI) growth, which leads to rapid electrochemical failure, while the particle size also plays key role here and its effects remain elusive. In this paper, through multiple-physical, chemical, and synchrotron-based characterizations, the evolutions of the composition, structure, morphology, and surface chemistry of silicon anodes with the particle size ranging from 50 to 5 µm upon cycling are benchmarked, which greatly link to their electrochemical failure discrepancies. It is found that the nano- and micro-silicon anodes undergo similar crystal to amorphous phase transition, but quite different composition transition upon de-/lithiation; at the same time, the nano- and 1 µm-silicon samples present obviously different mechanochemical behaviors from the 5 µm-silicon sample, such as electrode crack, particle pulverization/crack as well as volume expansion; in addition, the micro-silicon samples possess much thinner SEI layer than the nano-silicon samples upon cycling, and also differences in SEI compositions. It is hoped this comprehensive study and understanding should offer critical insights into the exclusive and customized modification strategies to diverse silicon anodes ranging from nano to microscale.

Copper exerts cytotoxicity through inhibition of iron-sulfur cluster biogenesis on ISCA1/ISCA2/ISCU assembly proteins.

Copper is an essential mineral nutrient that provides the cofactors for some key enzymes. However, excess copper is paradoxically cytotoxic. Wilson's disease is an autosomal recessive hereditary disease characterized by pathological copper accumulation in many organs, with high mortality and disability. Nevertheless, many questions about the molecular mechanism in Wilson's disease remain unknown and there is an imperative need to address these questions to better exploit therapeutic strategy. In this study, we constructed the mouse model of Wilson's disease, ATP7A-/- immortalized lymphocyte cell line and ATP7B knockdown cells to explore whether copper could impair iron-sulfur cluster biogenesis in eukaryotic mitochondria. Through a series of cellular, molecular, and pharmacological analyses, we demonstrated that copper could suppress the assembly of Fe-S cluster, decrease the activity of the Fe-S enzyme and disorder the mitochondrial function both in vivo and in vitro. Mechanistically, we found that human ISCA1, ISCA2 and ISCU proteins have a strong copper-binding activity, which would hinder the process of iron-sulfur assembly. Of note, we proposed a novel mechanism of action to explain the toxicity of copper by providing evidence that iron-sulfur cluster biogenesis may be a primary target of copper toxicity both in cells and mouse models. In summary, the current work provides an in-depth study on the mechanism of copper intoxication and describes a framework for the further understanding of impaired Fe-S assembly in the pathological processes of Wilson's diseases, which helps to develop latent therapeutic strategies for the management of copper toxicity.

Roles of conserved active site residues in the IscS cysteine desulfurase reaction.

Escherichia coli cysteine desulfurase (CD), IscS, modifies basal metabolism by transferring sulphur (S) from L-cysteine to numerous cellular pathways, whereas NFS1, a human CD, is active only in the formation of the [Acp]2:[ISD11]2:[NFS1]2 complex. Despite the accumulation of red-coloured IscS in E. coli cells as a result of the deficiency of accessible iron, as revealed in our previous studies, the mechanism of the potential enzymatic reaction remains unclear. In this study, the N-terminus of IscS was fused with the C-terminus of NFS1, which was reported to be almost fully active as IscS and exhibits a pyridoxal 5'-phosphate (PLP) absorption peak at 395 nm. Moreover, SUMO-EH-IscS exhibited significant growth recovery and NADH-dehydrogenase I activity in the iscS mutant cells. Furthermore, through in vitro and in vivo experiments combined with high-performance liquid chromatography and ultra-performance liquid chromatography-tandem mass spectrometry, it was shown that the new absorption peaks of the IscS H104Q, IscS Q183E, IscS K206A, and IscS K206A&C328S variants at 340 and 350 nm may correspond to the enzyme reaction intermediates, Cys-ketimine and Cys-aldimine, respectively. However, after mutation of the conserved active-site residues, additional absorption peaks at 420 and 430 nm were associated with PLP migration in the active-site pocket. Additionally, the corresponding absorption peaks of Cys-quinonoid, Ala-ketimine, and Ala-aldimine intermediates in IscS were 510, 325, and 345 nm, respectively, as determined by site-directed mutagenesis and substrate/product-binding analyses during the CD reaction process. Notably, red IscS formed in vitro by incubating IscS variants (Q183E and K206A) with excess L-alanine and sulphide under aerobic conditions produced an absorption peak similar to the wild-type IscS, at 510 nm. Interestingly, site-directed mutation of IscS with hydrogen bonds to PLP at Asp180 and Gln183 resulted in a loss of enzymatic activity followed by an absorption peak consistent with NFS1 (420 nm). Furthermore, mutations at Asp180 or Lys206 inhibited the reaction of IscS in vitro with L-cysteine (substrate) and L-alanine (product). These results suggest that the conserved active site residues (His104, Asp180, and Gln183) and their hydrogen bond with PLP in the N-terminus of IscS play a key role in determining whether the L-cysteine substrate can enter the active-site pocket and regulate the enzymatic reaction process. Therefore, our findings provide a framework for evaluating the roles of conserved active-site residues, motifs, and domains in CDs.

P2-Type Moisture-Stable and High-Voltage-Tolerable Cathodes for High-Energy and Long-Life Sodium-Ion Batteries.

P2-Na0.67Ni0.33Mn0.67O2 represents a promising cathode for Na-ion batteries, but it suffers from severe structural degradation upon storing in a humid atmosphere and cycling at a high cutoff voltage. Here we propose an in situ construction to achieve simultaneous material synthesis and Mg/Sn cosubstitution of Na0.67Ni0.33Mn0.67O2 via one-pot solid-state sintering. The materials exhibit superior structural reversibility and moisture insensitivity. In-operando XRD reveals an essential correlation between cycling stability and phase reversibility, whereas Mg substitution suppressed the P2-O2 phase transition by forming a new Z phase, and Mg/Sn cosubstitution enhanced the P2-Z transition reversibility benefiting from strong Sn-O bonds. DFT calculations disclosed high chemical tolerance to moisture, as the adsorption energy to H2O was lower than that of the pure Na0.67Ni0.33Mn0.67O2. A representative Na0.67Ni0.23Mg0.1Mn0.65Sn0.02O2 cathode exhibits high reversible capacities of 123 mAh g-1 (10 mA g-1), 110 mAh g-1 (200 mA g-1), and 100 mAh g-1 (500 mA g-1) and a high capacity retention of 80% (500 mA g-1, 500 cycles).

Proportional-Integral State Estimator for Quaternion-Valued Neural Networks With Time-Varying Delays.

This brief investigates the problem of state estimation of quaternion-valued neural networks (QVNNs) with time-varying delays. First, by extending the Jensen inequality to quaternion domain, an extended Jensen inequality with quaternion term is derived. Second, a class of proportional-integral state estimator (PISE) with exponential decay term is proposed. Then, by constructing a suitable Lyapunov-Krasovskii functional (LKF), some sufficient conditions are obtained to ensure the existence of the designed PISE and the gain matrices of the designed PISE can be directly computed. Simulations are given to illustrate the advantage of the proposed method.

Unraveling Atomic-Scale Origins of Selective Ionic Transport Pathways and Sodium-Ion Storage Mechanism in Bi2 S3 Anodes.

It is a major challenge to achieve a high-performance anode for sodium-ion batteries (SIBs) with high specific capacity, high rate capability, and cycling stability. Bismuth sulfide, which features a high theoretical specific capacity, tailorable morphology, and low cost, has been considered as a promising anode for SIBs. Nevertheless, due to a lack of direct atomistic observation, the detailed understanding of fundamental intercalation behavior and Bi2 S3 's (de)sodiation mechanisms remains unclear. Here, by employing in situ high-resolution transmission electron microscopy, consecutive electron diffraction coupled with theoretical calculations, it is not only for the first time identified that Bi2 S3 exhibits specific ionic transport pathways preferred to diffuse along the (110) direction instead of the (200) plane, but also tracks their real-time phase transformations (de)sodiation involving multi-step crystallographic tuning. The finite-element analysis further disclosed multi-reaction induced deformation and the relevant stress evolution originating from the combined effect of the mechanical and electrochemical interaction. These discoveries not only deepen the understanding of fundamental science about the microscopic reaction mechanism of metal chalcogenide anodes but also provide important implications for performance optimization.

Progress on Fe-Based Polyanionic Oxide Cathodes Materials toward Grid-Scale Energy Storage for Sodium-Ion Batteries.

The development of large-scale energy storage systems (EESs) is pivotal for applying intermittent renewable energy sources such as solar energy and wind energy. Lithium-ion batteries with LiFePO4 cathode have been explored in the integrated wind and solar power EESs, due to their long cycle life, safety, and low cost of Fe. Considering the penurious reserve and regional distribution of lithium resources, the Fe-based sodium-ion battery cathodes with earth-abundant elements, environmental friendliness, and safety appear to be the better substitutes in impending grid-scale energy storage. Compared to the transition metal oxide and Prussian blue analogs, the Fe-based polyanionic oxide cathodes possess high thermal stability, ultra-long cycle life, and adjustable voltage, which is more commercially viable in the future. This review summarizes the research progress of single Fe-based polyanionic and mixed polyanionic oxide cathodes for the potential sodium-ion batteries EESs candidates. In detail, the synthesized method, crystal structure, electrochemical properties, bottlenecks, and optimization method of Fe-based polyanionic oxide cathodes are discussed systematically. The insights presented in this review may serve as a guideline for designing and optimizing Fe-based polyanionic oxide cathodes for coming commercial sodium-ion batteries EESs.

Thermochemical Cyclization Constructs Bridged Dual-Coating of Ni-Rich Layered Oxide Cathodes for High-Energy Li-Ion Batteries.

Enhancing microstructural and electrochemical stabilities of Ni-rich layered oxides is critical for improving the safety and cycle-life of high-energy Li-ion batteries. Here we propose a thermochemical cyclization strategy where heating polyacrylonitrile with LiNi0.8Co0.1Mn0.1O2 can simultaneously construct a cyclized polyacrylonitrile outer layer and a rock-salt bridge-like inner layer, forming a compact dual-coating of LiNi0.8Co0.1Mn0.1O2. Systematic studies demonstrate that the mild cyclization reaction between polyacrylonitrile and LiNi0.8Co0.1Mn0.1O2 induces a desirable "layered to rock-salt" structural transformation to create a nano-intermedium that acts as the bridge for binding cyclized polyacrylonitrile to layered LiNi0.8Co0.1Mn0.1O2. Because of the improvement of the structural and electrochemical stability and electrical properties, this cathode design remarkably enhances the cycling performance and rate capability of LiNi0.8Co0.1Mn0.1O2, showing a high reversible capacity of 183 mAh g-1 and a high capacity retention of 83% after 300 cycles at 1 C rate. Notably, this facile and scalable surface engineering makes Ni-rich cathodes potentially viable for commercialization in high-energy Li-ion batteries.

ISCA2 deficiency leads to heme synthesis defects and impaired erythroid differentiation in K562 cells by indirect ROS-mediated IRP1 activation.

Iron­sulfur (Fe-S) clusters have been shown to play important roles in various cellular physiological process. Iron­sulfur cluster assembly 2 (ISCA2) is a vital component of the [4Fe-4S] cluster assembly machine. Several studies have shown that ISCA2 is highly expressed during erythroid differentiation. However, the role and specific regulatory mechanisms of ISCA2 in erythroid differentiation and erythroid cell growth remain unclear. RNA interference was used to deplete ISCA2 expression in human erythroid leukemia K562 cells. The proliferation, apoptosis, and erythroid differentiation ability of the cells were assessed. We show that knockdown of ISCA2 has profound effects on [4Fe-4S] cluster formation, diminishing mitochondrial respiratory chain complexes, leading to reactive oxygen species (ROS) accumulation and mitochondrial damage, inhibiting cell proliferation. Excessive ROS can inhibit the activity of cytoplasmic aconitase (ACO1) and promote ACO1, a bifunctional protein, to perform its iron-regulating protein 1(IRP1) function, thus inhibiting the expression of 5'-aminolevulinate synthase 2 (ALAS2), which is a key enzyme in heme synthesis. Deficiency of ISCA2 results in the accumulation of iron divalent. In addition, the combination of excessive ferrous iron and ROS may lead to damage of the ACO1 cluster and higher IRP1 function. In brief, ISCA2 deficiency inhibits heme synthesis and erythroid differentiation by double indirect downregulation of ALAS2 expression. We conclude that ISCA2 is essential for normal functioning of mitochondria, and is necessary for erythroid differentiation and cell proliferation.

Quantifying the Contribution of the Dispersion Interaction and Hydrogen Bonding to the Anisotropic Elastic Properties of Chitin and Chitosan.

The elastic tensors of chitin and chitosan allomorphs were calculated using density functional theory (DFT) with and without the dispersion correction and compared with experimental values. The longitudinal Young's moduli were 114.9 or 126.9 GPa for α-chitin depending on the hydrogen bond pattern: 129.0 GPa for ß-chitin and 191.5 GPa for chitosan. Furthermore, the moduli were found to vary between 17.0 and 52.8 GPa in the transverse directions and between 2.2 and 15.2 GPa in shear. Switching off the dispersion correction led to a decrease in modulus by up to 63%, depending on the direction. The transverse Young's moduli of α-chitin strongly depended on the hydroxylmethyl group conformation coupled with the dispersion correction, suggesting a synergy between hydrogen bonding and dispersion interactions. The calculated longitudinal Young's moduli were, in general, higher than experimental values obtained in static conditions, and the Poisson's ratios were lower than experimental values obtained in static conditions.

Inhibition of abnormally activated HIF-1α-GLUT1/3-glycolysis pathway enhances the sensitivity of hepatocellular carcinoma to 5-caffeoylquinic acid and its derivatives.

Over the past few years, the antitumor activity exhibited by 5-caffeylquinic acid (5-CQA), especially its inhibitory effect on hepatocellular carcinoma (HCC) proliferation and metastasis, has been recognized as a new research hotspot. However, impacted by the weak antitumor toxicity of 5-CQA, its clinical application has been limited. In this study, the antitumor effect arising from 5-CQA on HCC cells was evaluated through cell viability assay. In addition, proteomics, flow cytometry, qRT-PCR and western blotting were adopted to investigate the drug resistance mechanism of HCC cells to 5-CQA. As indicated by the results, 5-CQA significantly inhibited the proliferation of HCC cell lines MHCC97H and HCCLM3 with IC5048 h of 546.8 µM and 452 µM, respectively. According to the in-depth studies, the abnormal activation of HIF-1α/glucose transporters/glycolysis pathway of 5-CQA could be a key molecular mechanism leading to drug resistance of HCC cells. Thus, this study found that glucose starvation, glucose analogue 2-DG, hexokinase inhibitor bromopyruvic acid and PKM2 inhibitor compound 3k inhibited HCC cell proliferation in synergy with 5-CQA. Furthermore, though the 5-CQA derivatives methyl chlorogenate (MCGA) and 3,5-dicaffeoylquinic acid (3,5-diCQA) exhibited more potent antiproliferation activity in HCC cells than 5-CQA, they also up-regulated the expression of GLUT1/3, whereas they had no effect on hepatocytes. To be specific, under low-glucose culture conditions, the order of sensitivity of HCC cells to CQAs was 3,5-diCQA > MCGA > 5-CQA. In brief, the above results revealed that intervention in glucose metabolism can facilitate the effects of 5-CQA and its derivatives for treating HCC.

Magnetically assembled electrodes based on Pt, RuO2-IrO2-TiO2 and Sb-SnO2 for electrochemical oxidation of wastewater featured by fluctuant Cl- concentration.

Magnetically assembled electrode (MAE) flexibly attracts magnetic particles (auxiliary electrodes, AEs) on a main electrode (ME) by the magnetic force, where the role of ME is always ignored. In this study, Ti/Pt, Ti/RuO2-IrO2-TiO2 and Ti/Sb-SnO2 were selected as the ME for comparison in treating synthetic wastewater (acid red G or phenol) with variable Cl- content. The effects of ME type, loading amount of Fe3O4/Sb-SnO2 AEs, and Cl- concentration were investigated, followed by varied electrochemical characterizations. Results show that AEs played a vital role in electrode activity and selectivity, and MEs also exerted an unignorable influence on the performance of the MAEs. Among the three MEs, Ti/RuO2-IrO2-TiO2 has the best OER/CER ability, activating more extra active sites with same AEs loading amount, leading to higher organics degradation efficiency under chlorine-free condition. However, this MAE is featured by the noticeable accumulation of intermediate products under chlorine-free condition even if 0.3 g·cm-2 of AEs are loaded. All electrodes' performances were enhanced in the presence of Cl-. With high concentration chloride (0.5 M NaCl), the accumulation of intermediate products was reduced significantly, especially on Ti/RuO2-IrO2-TiO2 based MAE, and no chlorinated compound was identified. Finally, the structure-activity relationships of these MAEs were proposed.