Preparation of reversible cross-linked amphiphilic polymeric micelles with pH-responsive behavior for smart drug delivery.

A new type of reversible cross-linked and pH-responsive polymeric micelle (PM), poly[polyethylene glycol methacrylate-co-2-(acetoacetoxy)ethyl methacrylate]-b-poly [2-(dimethylamino)ethyl methacrylate] [P(PEGMA-co-AEMA)-b-PDMAEMA], was synthesized for targeted delivery of curcumin. After reversible cross-linking of the micellar shell, the PMs with a typical core-shell structure exhibited excellent stability against extensive dilution and good reversibility of pH-responsiveness in solutions with different pH values. P(PEGMA9-co-AEMA6)-b-PDMAEMA10 has the lowest critical micelle concentration (CMC) value (0.0041 mg mL-1), the highest loading capacity (13.86%) and entrapment efficiency (97.03%). A slow sustained drug release at pH 7.4 with 12.36% in 108 h, while a fast release (42.36%) was observed at pH 5.0. Furthermore, a dissipative particle dynamics (DPD) simulation method was employed to investigate the self-assembly process and pH-responsive behavior of PMs. The optimal drug-carrier ratio (2%) and fraction of water (92%) were confirmed by analyzing the drug distribution and morphology of micelles during the self-assembly process of the block copolymer. The simulation results were consistent with experimental results, indicating DPD simulation shows potential to study the structure properties of reversible cross-linked micelles. The present findings provide a new method for the development of SDDS with good structural stability and controlled drug release properties.

Controllable nonlinear propagation of partially incoherent Airy beams.

The self-accelerating beams such as the Airy beam show great potentials in many applications including optical manipulation, imaging and communication. However, their superior features during linear propagation could be easily corrupted by optical nonlinearity or spatial incoherence individually. Here we investigate how the interaction of spatial incoherence and nonlinear propagation affect the beam quality of Airy beam, and find that the two destroying factors can in fact balance each other. Our results show that the influence of coherence and nonlinearity on the propagation of partially incoherent Airy beams (PIABs) can be formulated as two exponential functions that have factors of opposite signs. With appropriate spatial coherence length, the PIABs not only resist the corruption of beam profile caused by self-focusing nonlinearity, but also exhibits less anomalous diffraction caused by the self-defocusing nonlinearity. Our work provides deep insight into how to maintain the beam quality of self-accelerating Airy beams by exploiting the interaction between partially incoherence and optical nonlinearity. Our results may bring about new possibilities for optimizing partially incoherent structured field and developing related applications such as optical communication, incoherent imaging and optical manipulations.

Unconscious processing of prototype heuristics in scientific innovation problem-solving.

Previously published studies on the effect of how different levels of unconsciousness (UC) and different loads of executive functions (EFs) affect insight problem solving are inconsistent. In a set of three experiments, we used scientific innovation problems (SIP) as insight metrics and distractor tasks to induce UC. Experiment 1 confirmed that, compared with conscious processing, unconscious processing is more conducive to obtaining prototype heuristics for correctly solving scientific innovation problems creatively. Furthermore, Experiment 2 found that different levels of unconscious processing, which were induced by different distractor tasks, made a different impact on high or low difficulty creative problem solving. Experiment 3 indicated that unconscious processing could improve prototype activation and the ability to use key heuristics information in prototype heuristics processing by improving working memory, inhibitory control, and shifting ability of EFs. Overall, the present results provide additional evidence for the role of consciousness levels in insight problem solving.

Glycomic, Glycoproteomic, and Proteomic Profiling of Philippine Lung Cancer and Peritumoral Tissues: Case Series Study of Patients Stages I-III.

Lung cancer is the leading cause of cancer death and non-small cell lung carcinoma (NSCLC) accounting for majority of lung cancers. Thus, it is important to find potential biomarkers, such as glycans and glycoproteins, which can be used as diagnostic tools against NSCLC. Here, the N-glycome, proteome, and N-glycosylation distribution maps of tumor and peritumoral tissues of Filipino lung cancer patients (n = 5) were characterized. We present several case studies with varying stages of cancer development (I-III), mutation status (EGFR, ALK), and biomarker expression based on a three-gene panel (CD133, KRT19, and MUC1). Although the profiles of each patient were unique, specific trends arose that correlated with the role of aberrant glycosylation in cancer progression. Specifically, we observed a general increase in the relative abundance of high-mannose and sialofucosylated N-glycans in tumor samples. Analysis of the glycan distribution per glycosite revealed that these sialofucosylated N-glycans were specifically attached to glycoproteins involved in key cellular processes, including metabolism, cell adhesion, and regulatory pathways. Protein expression profiles showed significant enrichment of dysregulated proteins involved in metabolism, adhesion, cell-ECM interactions, and N-linked glycosylation, supporting the protein glycosylation results. The present case series study provides the first demonstration of a multi-platform mass-spectrometric analysis specifically for Filipino lung cancer patients.

Low-grade sepiolite with low loading of Na/La salts for simultaneous removal of ammonia and phosphate from wastewater.

Efficient treatment of wastewater is of paramount importance for protecting the ecosystem. In this work, we prepared a low-grade sepiolite with low Na/La salt loadings (Na/La-Sep) and employed it for the simultaneous removal of ammonia (N) and phosphate (P) species in the wastewater. The key factors influencing the nutrient removal efficiency of Na/La-Sep, such as the concentration of the La/Na salt solution, the co-existing ion type, and surface zero charges, were investigated. Na/La-Sep exhibits excellent N and P adsorption capability and reduced the N and P concentrations in the spiked and real-world wastewaters to below the allowable N and P discharge limits. Due to the extraordinarily low cost of low-grade sepiolite and the low loading of Na/La salts, Na/La-Sep has a substantially lower cost when compared to other reported clay mineral adsorbents. Furthermore, the N and P removal mechanisms by Na/La-Sep were unraveled by combining the kinetic studies, the molecular dynamics (MD) simulation, and the electron density difference. The present findings might shed light on a new way to develop cost-efficient and high-efficiency adsorbents for alleviating eutrophication and deepen the understanding of N and P removal at a molecular level.

Switching the Activity of CRISPR/Cas12a Using an Allosteric Inhibitory Aptamer for Biosensing.

The current CRISPR/Cas12a-based diagnostic techniques focus on designing the crRNA or substrate DNA elements to indirectly switch the trans-cleavage activity of Cas12a responsive to target information. Here, we propose the use of an allosteric DNA probe to directly regulate the trans-cleavage activity of Cas12a and present a method for sensing different types of analytes. An allosteric inhibitor probe is rationally designed to couple the target recognition sequence with the inhibitory aptamer of the CRISPR/Cas12a system and enables binding to a specific target to induce the change of conformation, which leads to the loss of its inhibitory function on Cas12a. As a result, the structure-switchable probe can regulate the degree of activity of Cas12a depending on the dose of target. Scalability of our strategy can be achieved by simply replacing the loop domain with different target recognition sequences. The proposed method was validated by detecting adenosine triphosphate and let-7a, giving the detection limits of 490 nM and 26 pM, respectively, and showing an excellent specificity. We believe that this work exploits a viable approach to use the inhibitory aptamer of Cas12a as a regulatory element for biosensing purposes, enriching the arsenal of CRISPR/Cas12a-based methods for molecular diagnostics and spurring further development and application of aptamers of the CRISPR/Cas system.

N-Glycan and Glycopeptide Serum Biomarkers in Philippine Lung Cancer Patients Identified Using Liquid Chromatography-Tandem Mass Spectrometry.

Aberrant glycosylation has been extensively reported in cancer, with fundamental changes in the glycosylation patterns of cell-surface and secreted proteins largely occurring during cancer progression. As such, serum glycan and glycopeptide biomarkers have been discovered using mass spectrometry and proposed for cancer detection. Here, we report for the first time potential serum N-glycan and glycopeptide biomarkers for Philippine lung cancer patients. The N-glycan and glycoprotein profiles of a cohort (n = 26 patients, n = 22 age- and gender-matched) of lung cancer patients were analyzed and compared to identify potential N-glycan and glycopeptide serum biomarkers using nano-QToF-MS/MS and ultra-high-performance liquid chromatography coupled with triple quadrupole mass spectrometry dynamic multiple monitoring methods, respectively. Statistical analyses identified differential N-glycan and glycopeptide abundances. The N-glycans were mostly sialylated and sialofucosylated branched structures. The glycopeptides involved proteins in complement and coagulation cascades (p adj = 6.418 × 10-4), innate immunity (p adj = 6.094 × 10-3), acute inflammatory response (p adj = 6.404 × 10-5), defense response (p adj = 2.082 × 10-4), complement activation pathways (p adj = 1.895 × 10-2), and immunoglobulin-mediated immune response pathways (p adj = 4.818 × 10-2). Biomarker models were constructed using serum N-glycans [area under the curve (AUC) = 0.775; 95% CI: 0.617-0.931] and glycopeptides (AUC = 0.959; 95% CI: 0.85-1.0), with glycopeptides having higher accuracies than N-glycans. The results suggest that in the Philippine lung cancer patient sera, specific N-glycans and site-specific glycans are differentially expressed between cases and controls. This report represents the first serum glycan and glycopeptide biomarkers of Philippine lung cancer patients, further demonstrating the utility of mass spectrometry-based glycomic and glycoproteomic methods.

Identification of Chemosensory Genes, Including Candidate Pheromone Receptors, in Phauda flammans (Walker) (Lepidoptera: Phaudidae) Through Transcriptomic Analyses.

Olfactory and gustatory systems play an irreplaceable role in all cycles of growth of insects, such as host location, mating, and oviposition. Many chemosensory genes in many nocturnal moths have been identified via omics technology, but knowledge of these genes in diurnal moths is lacking. In our recent studies, we reported two sex pheromone compounds and three host plant volatiles that play a vital role in attracting the diurnal moth, Phauda flammans. The antennal full-length transcriptome sequence of P. flammans was obtained using the Pacbio sequencing to further explore the process of sex pheromone and host plant volatile recognition in P. flammans. Transcriptome analysis identified 166 candidate olfactory and gustatory genes, including 58 odorant-binding proteins (OBPs), 19 chemosensory proteins (CSPs), 59 olfactory receptors (ORs), 16 ionotropic receptors (IRs), 14 gustatory receptors (GRs), and 2 sensory neuron membrane proteins (SNMPs). Subsequently, a phylogenetic tree was established using P. flammans and other lepidopteran species to investigate orthologs. Among the 17 candidate pheromone receptor (PR) genes, the expression levels of PflaOR21, PflaOR25, PflaOR35, PflaOR40, PflaOR41, PflaOR42, PflaOR44, PflaOR49, PflaOR51, PflaOR61, and PflaOR63 in the antennae were significantly higher than those in other non-antennae tissues. Among these PR genes, PflaOR21, PflaOR27, PflaOR29, PflaOR35, PflaOR37, PflaOR40, PflaOR42, PflaOR44, PflaOR60, and PflaOR62 showed male-biased expression, whereas PflaOR49, PflaOR61, and PflaOR63 revealed female-biased expression. The functions of related OR genes were also discussed. This research filled the gap of the chemosensory genes of P. flammans and provided basic data for future functional molecular mechanisms studies on P. flammans olfaction.

Development and clinical application of a new transverse process retractor based on computer-aided design and 3D printing technology / 中国骨伤

OBJECTIVE@#To manufacture a new type of transverse process retractor by using computer-aided design(CAD) combined with 3D printing technology and investigate its clinical application effect.@*METHODS@#A new type of transverse protrusion retractor was developed by CAD combined with 3D printing technology. From September 2018 to September 2019, the new transverse process retractor was applied in clinic. Sixty patients with lumbar single segment lesions who needed treatment by pedicle screw fixation, bone grafting and interbody fusion were divided into new transverse process retractor group and control group, with 30 cases in each group. There were 14 males and 16 females in new type transverse process retractor group, the age was (68.0±4.3) years old on average; lesion segment of 8 cases were L3,4, 9 cases were L4,5, 13 cases were L5S1;5 cases of lumbar disc herniation, 20 cases of lumbar spinal stenosis, 5 cases of degenerative lumbar spondylolisthesis;new transverse process retractor was used to pedicle screw placement. While there were 15 males and 15 females in control group, with an average age of (69.2±4.5) years old;lesion segment of 8 cases were L3,4, 10 cases were L4,5, 12 cases were L5S1;5 cases of lumbar disc herniation, 21 cases of lumbar spinal stenosis, 4 cases of degenerative lumbar spondylolisthesis;the traditional lamina retractor was used for soft tissue pulling and finished pedicle screw placement by freehand. The length of surgical incision, the time required for inserting a single screw, fluoroscopy times, the times of adjusting the positioning needle or screw in insertion process, and the visual analogue scale (VAS) of surgical incision 72 hours after operation were compared between two groups.@*RESULTS@#Using CAD and 3D printing technology, a new type of transverse protrusion retractor was developed quickly. The length of surgical incision, the time required for inserting a single screw, fluoroscopy time, and the times of adjusting the positioning needle or screw in insertion process in new transverse process retractor group were less than those in control group(P<0.05). There was no significant difference in VAS of lumbar incision pain at 72 hours after operation between two groups(P>0.05).@*CONCLUSION@#Using CAD combined with 3D printing technology to develop a new transverse protrusion retractor has the advantages of convenient design, short development cycle and low cost. It provides a new idea for the research and development of new medical devices. The new transverse process retractor has the advantages of easy operation, reliable fixation, less damage to paravertebral muscle, convenient pedicle screw placement, reducing fluoroscopy time and so on.

New species and new synonyms of Macromotettixoides (Orthoptera: Tetrigidae) with an updated key.

The genus Macromotettixoides Zheng, Wei Jiang, 2005 is reviewed. Four new species of the genus, M. daiyunshanensis Deng, sp. nov., M. curvicarina Deng, sp. nov., M. convexa Deng, sp. nov. and M. shengtangshanensis Deng, sp. nov. are described with detailed illustrations of external morphology. Two new synonyms are established: M. jinggangshanensis, syn. nov. is synonymized with M. jiuwanshanensis Zheng, Wei Jiang, 2005; M. parvula Zha Wen, 2017, syn. nov. is synonymized with M. undulatifemura Deng, Zheng Yang, 2012. Additionally, an updated key to species of the genus is given.

Susceptibility and Resistance Mechanisms During Photodynamic Therapy of Melanoma.

Melanoma is the most aggressive malignant skin tumor and arises from melanocytes. The resistance of melanoma cells to various treatments results in rapid tumor growth and high mortality. As a local therapeutic modality, photodynamic therapy has been successfully applied for clinical treatment of skin diseases. Photodynamic therapy is a relatively new treatment method for various types of malignant tumors in humans and, compared to conventional treatment methods, has fewer side effects, and is more accurate and non-invasive. Although several in vivo and in vitro studies have shown encouraging results regarding the potential benefits of photodynamic therapy as an adjuvant treatment for melanoma, its clinical application remains limited owing to its relative inefficiency. This review article discusses the use of photodynamic therapy in melanoma treatment as well as the latest progress made in deciphering the mechanism of tolerance. Lastly, potential targets are identified that may improve photodynamic therapy against melanoma cells.

Nontuberculous Mycobacteria Infection After Autologous Fat Grafting for Cosmetic Breast Augmentation.

BACKGROUND: Autologous fat grafting has been widely applied in cosmetic breast augmentation in recent years. However, nontuberculous mycobacteria infection, as one of the multiple complications described in the literature, has been less well discussed. OBJECTIVE: The aims of the study were to report 5 cases of nontuberculous mycobacteria infection after autologous fat injection for the cosmetic breast augmentation and to explore its causes. METHODS: In this noncomparative, retrospective, and interventional case series, we identified 5 patients with nontuberculous mycobacteria infection. All patients had a history of previous autologous fat injection into the breast for cosmetic purpose, performed in different plastic facilities. RESULTS: Five patients developed nontuberculous mycobacteria infection after autologous fat injection for cosmetic breast augmentation and came to our group for treatment. Grafted fat removal through multiple debridement and long-term intravenous and oral antibiotic therapy were required in our cases. CONCLUSIONS: The number of nontuberculous mycobacteria infection after autologous fat injection into the breast is increasing. Surgeons should be aware of the complication, which rarely manifests during the procedure itself. Strict aseptic principles should be obeyed throughout the surgery.

Experimental study of individualized 3D printing-guided template combined with thoracolumbar pedicle screw placement for the treatment of ankylosing spondylitis / 中国骨伤

OBJECTIVE@#To evaluate accuracy and safety of individualized 3D printing guided template for thoracolumbar pedicle screw placement in patients with ankylosing spondylitis.@*METHODS@#From January 2016 to September 2019, thoracolumbar spine three-dimensional CT data of 8 patients with ankylosing spondylitis were included, Mimics 17.0 and ideaMaker computer software were applied to design thoracolumbar pedicle screw guided template of patients with AS, physical model of all patients (T-L)were printed by 3D printer, 2 parts in each patient, and divided into guide-plate-assisted screw group (experimental group) and free-hand nail group (control group). Thoracolumbar pedicle screws of both groups were placed by the same spinal surgeon. The accuracy of pedicle screw placement between two groups were evaluated according to results of postoperative CT, the accuracy of the fixation of thoracolumbar pedicle screw was divided into 4 grades, grade 0 and 1 screws were acceptable nails, grade 2 and 3 screws were unacceptable nails. The diameter and length of pedicle screws, the distance between entry point and posterior median line designed by preoperative 3D printing were compared with actual use in operation.@*RESULTS@#Twenty three blocks of thoracolumbar 3D printing screw of ankylosing spondylitis guided templates were designed and printed in guide-plate-assisted screw group, 46 screws were inserted and 44 screws were accepted. The time of implanting a screw into thoracolumbar pedicle was (4.20±1.15) min, the frequency of X-ray was (5.00±1.25) times and the average adjustment times of screw and Kirschner needle during screw placement was (1.76±1.32) times. In the control group, 46 nails were placed by traditional surgical method and 30 screws were accepted. The time of implanting a screw into thoracolumbar pedicle was (14.67±2.23) min, the frequency of X-ray fluoroscopy was (14.46±2.21) times and the average times of Kirschner needle adjustment was (4.76±3.39) times. The success rates between experimental group and control group were 95.65%(44 / 46) and 56.22%(30 / 46) respectively, and had statistical difference (χ=13.538, 0.05). The operation time of inserting a single screw, the times of X-ray fluoroscopy, and the average times of adjustment screw and Kirschner needle in experimental group were significant less than those in control group(<0.01).@*CONCLUSION@#The personalized guide template assisted the thoracolumbar fixation designed by 3D printing could significantly improve safety, accuracy and efficiency of surgery, especially suitable for thoracolumbar vertebral bodies requiring posterior pedicle screw fixation for fracture or dislocation with AS.

Rapid Identification on Chemical Components in Dalbergiae Odoriferae Lignum by UPLC-Q-TOF-MS/MS / 中国实验方剂学杂志

Objective::Dalbergiae Odoriferae Lignum is a rare traditional Chinese medicine material in China. However, there are many varieties of various sources and different qualities in the market at present. In order to further define the pharmacodynamic substance basis, electrospray time-of-flight tandem mass spectrometry (UPLC-Q-TOF-MS/MS) was used to rapidly analyze chemical constituents of methanol extract of Dalbergiae Odoriferae Lignum. Method::Chromatographic separation was performed on an UPLC RRHD SB-C18(3.0 mm×100 mm, 1.8 μm)for gradient elution, with mixtures of acetonitrile and 0.1%formic acid-water as mobile phases at a flow rate of 0.3 mL·min-1. The column temperature was maintained at 40 ℃. The data was collected in a negative ion mode with electro-spray ionization source(ESI). Result::According to molecular ion peaks and MS2 mass spectrometry characteristic fragment ions, Mass Bank databases, as well as the mass spectrometry information of reference substances and relevant literatures, a total of 83 constituents were identified, including 18 flavones, 31 isoflavones, 10 neoflavonoids, 9 isoflavanones, 7 other flavonoids and 8 other components. Conclusion::UPLC-Q-TOF-MS/MS can quickly, accurately and comprehensively identify chemical constituents in methanol extract of Dalbergiae Odoriferae Lignum, and isoflavones, flavones, neoflavonoids and isoflavanones are the main chemical constituents, which laid a foundation for the basic research of medicinal substances of Dalbergiae Odoriferae Lignum, and provided theoretical basis and technical support for the improvement of quality standards of Dalbergiae Odoriferae Lignum.

3D printing technology assisted the preoperative planning and application value in adult kyphoscoliosis deformity / 中国骨伤

OBJECTIVE@#To explore the application value of 3D printing technology in preoperative surgery plan and intraoperative auxiliary operation for adult kyphoscoliosis deformity.@*METHODS@#The clinical data of 12 adult patients with kyphoscoliosis deformity treated from September 2017 to January 2019 were retrospectively analyzed. There were 3 males and 9 females, aged from 21 to 63 years old with an average of (47.67±13.32) years old. Among them, 4 cases were congenital kyphoscoliosis, 2 cases were old tuberculosis thoracolumbar kyphosis ; 2 cases were idiopathic kyphoscoliosis, 4 cases were degenerative kyphoscoliosis. The CT scan data of the patient's spine was imported into Mimics17.0 software to establish the three dimensional model of the spine, and the spine model was produced by 3D printer. Using the spine model simulated operation, preoperative surgery program planning and formulated a precise surgery, and further analysed postoperative imaging parameters improvement. All the patients were followed up for more than 1 year. Before and after operation and at the last follow-up, the scoliosis Cobb angle, maximum kyphosis Cobb angle, and coronal plane balance (distance between C 7 plumbline and center sacral vertical line, CPL-CSVL), sagittal plane balance (sagittal vertical axis, SVA), pelvic parameters and other related imaging parameters were measured to further evaluate its orthopedic effect.@*RESULTS@#Twelve patients with spine deformity were treated with different osteotomy and internal fixation fusion methods under the guidance of a 1∶1 spine model (pedicle screw placement of 4 patients with severe deformity were assisted by pedicle screw guide plates), nail placement and osteotomy have good effects, no major tissue damage such as blood vessels, nerves and spinal cord during and after surgery, no complications such as cerebrospinal fluid leakage and infection. Preoperative Cobb angle of scoliosis was (56.5±22.5) °, Cobb angle of kyphosis was (65.2±19.5) °, C PL-CSVL was (45.8±16.9) mm, SVA was (48.7±25.4) mm. Postoperative at 4 weeks, Cobb angle of scoliosis was (20.8±11.5) °, and Cobb angle of kyphosis was (22.0±6.6) °, with correction rates of (65.1±9.7)% and (64.6± 10.6)%, respectively ; C PL-CSVL was (22.3±8.9) mm, and SVA was (23.3±13.1) mm, all of which were significantly improved compared with preoperative results. The mean follow-up time was (18.5±7.9) months in 12 patients. At the last follow-up, the Cobb angles of scoliosis and kyphosis were (22.2±10.8) ° and (23.6±7.7) °, respectively, C PL-CSVL was (23.5±10.8) mm, and SVA was (24.7±12.5) mm. The results were statistically significant compared preoperative (0.05).@*CONCLUSION@#The 3D print model can visually and clearly show the vertebral morphology and structure of adult kyphoscolisis and its spatial relationship with the adjacent vertebrae, blood vessels, and nerves, which provides a good and intuitive stereoscopic anatomical structure observation for the individualization of the surgical plan. Pre-simulation of operations to determine the internal fixation, fusion segment and osteotomy orthopedic way, may to provide a reference for actual clinical surgery, and can improve the accuracy and safety of surgery.

Does Exposure to Foreign Culture Influence Creativity? Maybe It's Not Only Due to Concept Expansion.

Multicultural experience refers to those experiences gained through individuals' contact with other cultures. This study focused on exploring whether knowledge of different cultures can improve creative performance-and also how multicultural experiences influenced this performance through changes in individual's physiological mechanisms. Study 1 explored the influence of different cultural priming on creative story-writing tasks. Eighty-nine Chinese college students were randomly assigned to 4 conditions: sole American culture, dual cultures, sole Chinese culture or control condition, and made to watch 45 min slides with cultural elements-including pictures, music and videos,-and then they were asked to complete the creative story-writing task. The results showed that American culture priming group's score was significantly higher than the control condition with regards to the uniqueness and novelty of the creative story-writing task. Study 2 was aimed at exploring the relationship between physiological arousal levels induced by different cultural and creative performance. We divided the whole experiment into five stages,-including the baseline, picture, listening to music, watching video, and completing creative tasks. Through Biofeedback measurement, we recorded the physiological indexes of participants in different groups in every stage, including skin conductance, thermal, electroencephalographic, and heart rate. The results showed that contacting with foreign cultures would increase individuals' physiological arousal level and brain activity, which contributed to the following creative task.

The value analysis of serum circulating immune complexes,C3and C4in rheumatoid arthritis / 国际检验医学杂志

Objective To explore the value of serum circulating immune complex C 1q(CIC-C1q),comple-ment C3and C4in the diagnosis and treatment of patients with rheumatoid arthritis(RA).Methods From June 2014 to June 2016,60 cases of rheumatoid arthritis treated in Luoyang Central Hospital Affiliated to Zhengzhou University were selected as the observation group.Meanwhile,60 cases who under went healthy physical examination were chosen as control group.The levels of CIC-C1q,C3and C4in serum of two groups were detected by C1q solid-phase ELISA and immunoturbidimetry respectively,and the differences were com-pared.Results The level of CIC-C1q in the observation group was significantly higher than that in the control group,the level of C4was lower than control group,and there was statistical significance in the differences (P<0.05).But there was no statistical difference between the two groups of the C3level(P>0.05).The level of CIC-C1q was ascending in control group,quiescent phase RA group and active phase RA group,the statisti-cal significance was existed(P<0.05).The level of C4was successively decrease in the three groups,and there was a statistically significant difference(P<0.05).There was no significant difference in the level of C3the three groups(P> 0.05).Conclusion The detection of CIC-C1q and C4has a good application value in the treatment evaluation for patients with RA.

Secondary metabolic responses to treatment of 2-aminoindan-2-phosphonic acid in cell lines from Arnebia euchroma / 中国中药杂志

The accumulation of rosmarinic acid, acetylshikonin, deoxyshikonin, β, β'-dimethylacrylshikonin and isovalerylshikonin was investigated in cell suspension cultures of Arnebia euchroma (Royle) Johnst under the influence of 2-aminoindan-2-phosphonic acid (AIP), an inhibitor of phenylalanine ammonia lyase (PAL), and of the effector methyl jasmonate (MeJA). The results showed that methyl jasmonate promoted the accumulation of rosmarinic acid and shikonin derivatives. Conversely, 2-aminoindan-2-phosphonic acid suppressed the formation of rosmarinic acid, which indicated that AIP, indeed, was able to inhibit the phenylpropanoid pathway in A. euchroma. Meanwhile, the content of total shinkonins and other four kinds of shikonin derivatives, though varied in degrees, was also inhibited. And the inhibition was dose-dependent and time-dependent. Acetylshikonin responsed most rapidly to the treatment of AIP, the content reduced after 24 h of treatment and decreased to only half of those untreated control 48 h after teratment. β, β'-Dimethylacrylshikonin, difffer from acetylshikonin, responded much slowly to the treatment, inhibition could only be observed 96 h later. These suggest that phenylpropanoid pathway plays an important role in the shikoninsbiosynthesis, and this study provides a reference for the further research in metabolic regulation of producing shikonins by cell culture technology and biosynthesis pathways of shikonin derivatives. Still, shikonins biosynthesis pathways is complicated, the exact dose- and time-effect relationship of AIP and interaction between AIP and other effectors like MeJA need further research.

Genetic polymorphisms in NAT1, NAT2, GSTM1, GSTP1 and GSTT1 and susceptibility to colorectal cancer among Filipinos

@#Objectives. Polymorphisms in metabolic genes which alter rates of bioactivation and detoxification have been shown to modulate susceptibility to colorectal cancer. This study sought to evaluate the colorectal cancer risk from environmental factors and to do polymorphism studies on genes that code for Phase I and II xenobiotic metabolic enzymes among Filipino colorectal cancer patients and matched controls. Methods. A total of 224 colorectal cancer cases and 276 controls from the Filipino population were genotyped for selected polymorphisms in GSTM1, GSTP1, GSTT1, NAT1 and NAT2. Medical and diet histories, occupational exposure and demographic data were also collected for all subject participants.Results. Univariate logistic regression of non-genetic factors identified exposure to UV (sunlight) (OR 1.99, 95% CI: 1.16-3.39) and wood dust (OR 2.66, 95% CI: 1.21-5.83) and moldy food exposure (OR 1.61, 95% CI:1.11-2.35) as risk factors; while the NAT2*6B allele (recessive model OR 1.51, 95% CI :1.06-2.16; dominant model OR 1.87, 95% CI: 1.05-3.33) and homozygous genotype (OR 2.19, 95% CI: 1.19-4.03) were found to be significant among the genetic factors. After multivariate logistic regression of both environmental and genetic factors, only UV radiation exposure (OR 2.08, 95% CI: 1.21-3.58) and wood dust exposure (OR 2.08, 95% CI: 0.95-5.30) remained to be significantly associated with increasing colorectal cancer risk in the study population.Conclusion. This study demonstrated that UV sunlight and wood dust exposure play a greater role in influencing colorectal cancer susceptibility than genotype status from genetic polymorphisms of the GST and the NAT` genes.

The prevalence of CYP2D6 Gene Polymorphisms among Filipinos and their use as biomarkers for lung cancer risk

Objectives@#The highly polymorphic nature of the CYP2D6 gene and its central role in the metabolism of commonly used drugs make it an ideal candidate for pharmacogenetic screening. This study aims to determine the prevalence of CYP2D6 polymorphisms among Filipinos and their association to lung cancer. @*Method@#Forty seven single nucleotide polymorphisms (SNPs) of the CYP2D6 gene were genotyped from DNA samples of 115 cases with lung cancer and age- and sex-matched 115 controls. @*Results@#Results show that 18 out of 47 polymorphisms have significant genotypic variability (>1% for at least 2 genotypes). No variant is associated with lung cancer. However, rs1135840, rs16947 and rs28360521, were found to be highly variable among Filipinos. @*Conclusion@#This study demonstrated that CYP2D6 polymorphisms are present among Filipinos, which, although not found to be associated with lung cancer, can be useful biomarkers for future pharmacogenetic studies. The SNP rs16947 is found to be associated with cancer and timolol-induced bradycardia; the SNP rs1135840, on the other hand, is only shown to be linked with cancer. The genetic variant rs28360521 is known to be associated with low-dose aspirin-induced lower gastrointestinal bleeding.