Does total hip arthroplasty in elderly patients with femoral neck fractures reduce complications?: A Japanese DPC study.

BACKGROUND: The global increase in femoral neck fractures due to aging and osteoporosis is a major clinical challenge. The debate on the optimal surgical intervention for femoral neck fractures remains unresolved. This large-scale study explores femoral neck fractures among the elderly, focusing on the comparative outcomes of Total Hip Arthroplasty (THA) versus Bipolar Hemiarthroplasty (BHA) in Japanese patients. METHODS: Using the Japanese National Administrative Diagnosis Procedure Combination (DPC) database, we studied cases of femoral neck fracture from April 2016 to March 2023, and after propensity score matching by age, sex, and comorbidities, we examined the association between THA, complications, and clinical outcomes, and the usefulness of THA for elderly patients with femoral neck fracture. RESULTS: One-to-one propensity score matching identified 7741 pairs of THA and BHA cases. There was no difference in length of stay between the THA and BHA groups. Significantly more blood transfusions were required in the THA group. There was no significant difference in mortality between the THA and BHA groups, but there was a reduced risk of pneumonia in the THA group, with a ratio of 0.547 (95% CI: 0.418-0.715). On the other hand, the THA group had a higher risk of pulmonary embolism, with a ratio of 1.607 (95% CI: 1.379-1.874). The THA group shows improved discharge rates directly home from the facility where the operation was performed, with a ratio of 1.798 (95% CI: 1.675-1.929). CONCLUSION: The findings of this research indicate that THA is more effective than BHA in enabling elderly Japanese patients with femoral neck fractures to be discharged directly home and in preventing pneumonia, despite concerns about pulmonary embolism. These findings suggest that THA may improve functional prognosis in elderly patients with femoral neck fractures, although there is a trade-off with an increased risk of pulmonary embolism.

Surgery on admission and following day reduces hip fracture complications: a Japanese DPC study.

INTRODUCTION: The efficacy of early surgery in preventing complications among Japanese elderly patients with hip fractures requires further investigation. This study aims to use a comprehensive Japanese hip fracture case database to determine whether surgery within the day of admission and the following day reduces the incidence of complications and mortality during hospitalization in elderly hip fracture patients. MATERIALS AND METHODS: We retrospectively analyzed the Japanese National Administrative DPC (Diagnosis Procedure Combination) database from April 2016 to March 2022. Approximately 1100 DPC-affiliated hospitals consistently provided medical records with consent for research. The study investigated the association between postoperative pneumonia, deep vein thrombosis, pulmonary embolism, and mortality during hospitalization after propensity score matching, focusing on surgeries conducted on the day of admission and the following day. RESULTS: After one-to-one propensity score matching for age, gender, and comorbidity, we identified 146,441 pairs of patients who underwent surgery either within the day of admission and the following day or after the third day of admission. Surgery on the third day or later was independently associated with increased risks of pneumonia, deep vein thrombosis, pulmonary embolism, and mortality during hospitalization with risk ratios of 1.367 (95% CI 1.307-1.426), 1.328 (95% CI 1.169-1.508), 1.338 (95% CI 1.289-1.388), and 1.167 (95% CI 1.103-1.234), respectively. CONCLUSION: A comprehensive study of elderly Japanese patients with hip fractures in the DPC database showed that surgery on admission and the following day is crucial for preventing complications like pneumonia, deep vein thrombosis, pulmonary embolism, and mortality during hospitalization.

Acetabular coverage exerts minimal influence on femoral head collapse and the necessity for surgical intervention in patients with osteonecrosis of femoral head.

PURPOSE: The acetabular coverage in osteonecrosis of the femoral head (ONFH) affects the need for surgical intervention, and the collapse of the femoral head remains unclear. This study aimed to evaluate the relation between the acetabular coverage and the need for surgical treatment and femoral head collapse. METHODS: The study included 158 patients with 252 hips with glucocorticoid administration and idiopathic ONHF without osteoarthritis changes. The mean age at the first visit was 45.2 years, and the mean follow-up period was 92.2 months. All ONFH hips were subsequently divided into two groups: those needing surgical intervention and those without surgery. Additionally, it divided 167 initially non-collapsed hips into those that either later collapsed or not. Radiographic parameters with the centre-edge angle, acetabular roof obliquity, sharp angle, and necrotic location, following the guidelines of the Japanese Investigation Committee, were evaluated. RESULTS: There were no significant differences in radiographic parameters between the 106 hips that underwent surgery and the 146 hips without surgery. Among the 167 hips without initial collapse, 91 eventually collapsed while 76 did not; their radiographic findings have no significant differences. The necrotic locations were significantly larger in hips requiring surgical intervention or femoral head collapse. Furthermore, 21.8% (55 out of 252 hips) had acetabular dysplasia, which did not significantly correlate with the necessity for surgical treatment or the incidence of femoral head collapse. CONCLUSIONS: Acetabular coverage has little effect on the necessity for surgical treatment and femoral head collapse in ONFH patients over a long-term follow-up.

Clinical Outcomes of Bipolar Hemiarthroplasty with a Conjoined Tendon-Preserving Posterior Approach for Femoral Neck Fractures.

Background and Objectives: The conventional posterior approach in the lateral decubitus position is widely used for femoral neck fractures in femoral hemiarthroplasty. Postoperative dislocation is the major problem with this approach. The conjoined tendon-preserving posterior (CPP) approach is a less invasive surgical approach than the conventional posterior approach to the hip, maintains posterior stability, and preserves short external rotators and joint capsules. However, the mention was required to avoid muscle damage and whether muscle damage affects postoperative dislocation or not. The current study aimed to evaluate the clinical results of the CPP approach in hemiarthroplasty for femoral neck fractures and identify muscle damage risk factors. Materials and Methods: This study was a retrospective cohort study and included 170 hips in 168 patients. The mean age at the operation was 81.2 years. The preservation rate of the internal obturator muscle and gemellus inferior muscle and factors related to intraoperative short rotator muscle injury were investigated retrospectively. The postoperative complications and the relation between muscle damage and postoperative dislocation were investigated. Results: In the four hips (2.3%) with the obturator internus muscle damage, thirty-eight hips (22.4%) with gemellus inferior muscle damage were detected; in the muscle-damaged cases, the high body mass index (BMI) was significantly higher. The complication occurred in four hips (2.3%), including postoperative posterior dislocation in one hip without muscle damage (0.6%). Postoperative infection occurred in one hip (0.6%), and peroneal or sciatic nerve paralysis was suspected in two hips (1.1%). Conclusions: Compared to the conventional posterior approach in previous reports, the CPP approach reduces postoperative dislocation. A higher BMI is a risk factor for muscle damage, and the gemellus inferior muscle damage has no effect on postoperative dislocation. The CPP approach for BHA appeared to be an effective treatment method.

Minimal Influence on Muscle Strength and Patient Reported Outcome Measures by Conjoined Tendon Detachment in Anterolateral Muscle-Sparing Total Hip Arthroplasty.

Purpose: The conjoined external rotator tendon (CERT), composed of the tendons of the gemellus superior, obturator internus (OI), and gemellus inferior muscles, stabilizes the hip joint. The study investigates the clinical and radiological effects of the CERT release during anterolateral-supine approach (ALSA) total hip arthroplasty (THA). Methods: A cohort of 60 patients who underwent ALSA THA was examined. Pre- and post-operative muscle width, muscle strength, and radiological data were compared between the CERT-detached and preserved groups. In addition, Clinical assessments were performed using the Japanese Orthopaedic Association Hip-Disease Evaluation Questionnaire and the short-form 36 questionnaires. Results: 58.3% had CERT detached, resulting in radiological atrophy of the OI muscle. Despite this, hip flexion, extension, and abduction muscle strength significantly improved at 6 months post-surgery. The detached CERT did not substantially affect patient-reported outcome measures, including pain and daily activities, within the 6-month follow-up. Discussion: The study suggests that while CERT detachment can lead to muscle atrophy, it has a limited impact on muscle strength and patient-reported outcome measures, indicating the muscle's potential redundancy. Preserving the CERT might enhance stability and prevent atrophy but could increase the risk of complications. CERT release is recommended when femur exposure is inadequate.

Low Young's Modulus TiNbSn Alloy Locking Plates Accelerate Osteosynthesis in Rabbit Tibiae.

A new beta TiNbSn alloy with a low Young's modulus of approximately 40 GPa has been developed to resolve the stress shielding by Young's modulus divergence. In this study, the efficacy of TiNbSn alloy locking plates on bone repair is compared to that of commercially pure titanium (CP-Ti). The TiNbSn alloy and CP-Ti, which have Young's moduli of 49.1 GPa and 107 GPa, respectively, were compared. Male Japanese white rabbits were anesthetized, and osteotomy and osteosynthesis with locking plates were performed on the right tibia. The bone repair was assessed using micro-computed tomography (CT), histomorphometry, immunohistochemistry, and mechanical testing. Micro-CT, histomorphometry, immunohistochemistry, and mechanical testing were performed four weeks after osteotomy. Six weeks after surgery, micro-CT and mechanical testing were performed. Micro-CT analysis at four weeks after surgery showed that the intramedullary fracture callus in the TiNbSn alloy group had more bone volume and numerous bridging structures compared to the CP-Ti group (CP-Ti vs. TiNbSn alloy, 34.3 ± 13.1 mm3 vs. 61.3 ± 19.6 mm3, p = 0.02; mean ± standard deviation). At four weeks post-osteotomy, the healed tibia showed significantly higher strength in the TiNbSn alloy group compared with CP-Ti (CP-Ti vs. TiNbSn alloy, 81.3 ± 31.2 N vs. 133.7 ± 46.6 N, p = 0.04). TiNbSn alloy locking plates had a more positive impact on bone formation and bone strength restoration than the CP-Ti locking plates during the early phase of bone healing.

TiNbSn stems with gradient changes of Young's modulus and stiffness reduce stress shielding compared to the standard fit-and-fill stems.

BACKGROUND: The difference between Young's moduli of the femur and the stem causes stress shielding (SS). TiNbSn (TNS) stem has a low Young's modulus and strength with gradient functional properties during the change in elastic modulus with heat treatment. The aim of this study was to investigate the inhibitory effect of TNS stems on SS and their clinical outcomes compared to conventional stems. METHODS: This study was a clinical trial. Primary THA was performed using a TNS stem from April 2016 to September 2017 for patients in the TNS group. Unilateral THA was performed using a Ti6Al4V alloy stem from January 2007 to February 2011 for patients in the control group. The TNS and Ti6Al4V stems were matched in shape. Radiographs were obtained at the 1- and 3-year follow-ups. Two surgeons independently checked the SS grade and appearance of cortical hypertrophy (CH). The Japanese Orthopaedic Association (JOA) scores before and 1 year after surgery were assessed as clinical scores. RESULTS: None of the patients in the TNS group had grade 3 or 4 SS. In contrast, in the control group, 24% and 40% of patients had grade 3 and 4 SS at the 1- and 3-year follow-ups, respectively. The SS grade was lower in the TNS group than in the control group at the 1- and 3-year follow-ups (p < 0.001). The frequencies of CH in both groups were no significant difference at the 1- and 3-year follow-ups. The JOA scores of the TNS group significantly improved at 1 year after surgery and were comparable to control group. CONCLUSION: The TNS stem reduced SS at 1 and 3 years after THA compared to the proximal-engaging cementless stem, although the shapes of the stems matched. The TNS stem could reduce SS, stem loosening, and periprosthetic fractures. TRIAL REGISTRATION: Current Controlled Trials. ISRCTN21241251. https://www.isrctn.com/search?q=21241251 . The date of registration was October 26, 2021. Retrospectively registered.

Genome-Wide Association Study and Transcriptome of Japanese Patients with Developmental Dysplasia of the Hip Demonstrates an Association with the Ferroptosis Signaling Pathway.

This study examined the association between developmental dysplasia of the hip (DDH) and disease-associated loci in a Japanese cohort. A genome-wide association study (GWAS) of 238 Japanese patients with DDH and 2044 healthy individuals was performed. As a replicate, GWAS was also conducted on the UK Biobank data with 3315 cases and matched 74,038 controls. Gene set enrichment analyses (GSEAs) of both the genetics and transcriptome of DDH were performed. Transcriptome analysis of cartilage specimens from DDH-associated osteoarthritis and femoral neck fractures was performed as a control. Most of the lead variants were very low-frequency ones in the UK, and variants in the Japanese GWAS could not be replicated with the UK GWAS. We assigned DDH-related candidate variants to 42 and 81 genes from the Japanese and UK GWASs, respectively, using functional mapping and annotation. GSEA of gene ontology, disease ontology, and canonical pathways identified the most enriched pathway to be the ferroptosis signaling pathway, both in the Japanese gene set as well as the Japanese and UK merged set. Transcriptome GSEA also identified significant downregulation of genes in the ferroptosis signaling pathway. Thus, the ferroptosis signaling pathway may be associated with the pathogenic mechanism of DDH.

Association between Hip Center Position and Isokinetic Hip Muscle Performance after Anterolateral Muscle-Sparing Total Hip Arthroplasty.

Background and objectives: The superior placement of the acetabular cup induced the delayed recovery of abductor muscle moment after total hip arthroplasty (THA) with a conventional posterior approach. The anterior-based muscle-sparing (ABMS) THA effectively reduces soft tissue damage, including muscles. The influence of hip center position on anterior-based muscle-sparing (ABMS) total hip arthroplasty (THA) for post-operative hip muscle strength was unclear. We evaluate whether the hip center position affects the recovery of hip muscle strength after ABMS THA. Materials and Methods: The study was performed as a retrospective cohort study, and included 38 hips in 38 patients that underwent primary ABMS THA. Muscle strength was measured using isokinetic dynamometry before the operation, and at 6 and 12 months after surgery. The horizontal and vertical centers of rotation (H-COR and V-COR), vertical shift (V-shift), leg length, and global femoral offset were determined radiographically in reference to a previous report. Results: A weak negative correlation was observed between abduction muscle strength at 6 months and V-shift; a V-shift more than 15 mm demonstrated significantly decreased abductor muscle strength at 6 months. Conclusions: The superior placement of the hip center caused delayed recovery of abductor muscle strength in hips with anterolateral minimally invasive THA. There seems to exist no biomechanical reason why the same should not also be the case for the muscle-sparing approach.

The intraoperative hip range of motion in total hip arthroplasty predicts postoperative patient's satisfaction for cutting toenails and putting on sock.

BACKGROUND: Restricted hip range of motion (ROM) has been proposed as a useful diagnostic tool for osteoarthritis. The relations between the intraoperative hip ROM under anesthesia in total hip arthroplasty (THA) and recovery of clinical mobility outcomes were unclear. This study evaluated the association between the intraoperative hip ROM under anesthesia in THA and the postoperative recovery of clinical mobility, including cutting toenails and putting on socks after THA. METHODS: The study was performed as a prospective cohort study and included 93 hips in 85 patients who underwent primary anterior-based muscle-sparing THA in the supine position. The hip ROM was evaluated under anesthesia before skin incision and intraoperative stability test. The Japanese Orthopaedic Association Hip-Disease Evaluation Questionnaire (JHEQ) was evaluated. A questionnaire on whether and how patients could cut toenails and putting on socks was assessed. The relationship between hip ROM at intraoperative stability tests and JHEQ moving score, cutting toenails, and putting on socks scores were evaluated statistically. RESULTS: We observed a week positive correlation between intraoperative hip ROM and the total of JHEQ mobility score. A moderate positive correlation was observed between external rotation angle with flexion 90°and cutting toenails and putting on socks score oh JHEQ. 94.6% and 96.8% of the patients could cut their toenails and putting on socks by themselves after surgery. The optimum cutoff range for high patient satisfaction for putting on socks and cutting toenails was 110° for flexion and 35°-40° for the external rotation angle in the intraoperative stability test. CONCLUSION: Hip ROM during intraoperative stability testing, especially the external rotation angle can predict postoperative outcomes and patient satisfaction for cutting toenails and putting on socks. We suggested that the capsule or capsular ligament release around the hip was increased to provide sufficient ROM without compromising stability.

Mid-term results of a new femoral prosthesis using Ti-Nb-Sn alloy with low Young's modulus.

BACKGROUND: This study was performed to investigate the mid-term results of Ti-Nb-Sn (TNS) alloy stem with a low Young's modulus. METHODS: This study was a multicenter prospective cohort study. A total of 40 primary total hip arthroplasties performed between April 2016 and September 2017 was enrolled in this study. With the unique functional gradient properties by heating treatment, the strength of the proximal portion was enhanced, while the distal portion maintained a low Young's modulus. The surgeries were performed through the posterolateral approach using the TNS alloy stems. Radiographs were taken from immediately after surgeries until 3 years, and stress shielding and subsidence of the stems were evaluated. The incidences of the stem breakage were also assessed. Clinical assessments were performed using Japanese Orthopaedic Association (JOA) and Japanese Orthopaedic Association Hip Disease Evaluation Questionnaire (JHEQ) scores. RESULTS: Among the 40 enrolled patients, 36 patients were female and 4 were male. At 3 years after surgery, there were no radiologic signs of loosening, subsidence, or breakage of the stem. Stress shielding was observed in 26 hips (65%). Of 26 hips, 16 hips (40%) were grade 1 and 10 hips (25%) were grade 2. There was no advanced stress shielding. The JOA and JHEQ scores significantly improved compared with the preoperative scores. CONCLUSION: The current study using a new TNS alloy femoral stem showed good clinical outcomes at 3-year follow-up. Radiologically, there was no loosening or subsidence of the stem. The mild stress shielding was observed in 65% of patients. TRIAL REGISTRATION: Current Controlled Trials ISRCTN21241251 . The date of registration was October 26, 2021. Retrospectively registered.

Acceleration of Fracture Healing in Mouse Tibiae Using Intramedullary Nails Composed of ß-Type TiNbSn Alloy with Low Young's Modulus.

The optimal Young's modulus of material of orthopedic devices for fracture treatment is still unknown. The purpose of present study was to evaluate the impacts of intramedullary nails composed of a titanium alloy with low Young's modulus, on accelerating fracture healing compared with stainless steel with high Young's modulus. A ß-type TiNbSn alloy with a low Young's modulus close to that of human cortical bone was developed for clinical application. TiNbSn alloy with a Young's modulus of 45 GPa and stainless steel with a Young's modulus of 205 GPa were compared, with respect to the impacts on fracture healing. Fracture and fixation using intramedullary nail were performed on the right tibiae of C57BL/6 mice. The assessment of bone healing was performed via micro-computed tomography, histomorphometry, and quantitative reverse transcription polymerase chain reaction. In micro-computed tomography, larger bone volumes were observed in the fracture callus treated with TiNbSn alloy in comparison with those treated with stainless steel. Histological assessments confirmed accelerated cartilage absorption and new bone formation in the TiNbSn alloy group compared with the stainless steel group. The expression of Col1a1, Runx2, Dkk1, and Acp5 was higher in the TiNbSn alloy group, while that of Col2a1 and Col10a1 was lower in the late phase. The present study demonstrated that the fixation by intramedullary nails with TiNbSn alloy offered an accelerated fracture healing with promotion of bone formation via increased Runx2 expression. TiNbSn alloy might be a promising material for fracture treatment devices.

Limited effects on patient outcomes of conjoint tendon release in anterolateral muscle-sparing total hip arthroplasty.

BACKGROUND: The anterolateral muscle-sparing total hip arthroplasty (THA) in the supine position is advantageous owing to the very low-dislocation rate and excellent leg length discrepancy control. However, femur exposure is challenging. Although the conjoined external rotators tendon (CERT) release is effective in improving femoral access, the effects on clinical outcomes remain unclear. The purpose of this study was to evaluate the clinical and radiographic results of CERT release in the anterolateral muscle-sparing THA approach. METHODS: The study was performed as a retrospective cohort study and included 85 hips in 85 patients who underwent primary anterolateral THA. Clinical and radiographic outcomes were investigated 6 months and 1 year after THA (CERT-preserved and non-released patients). The Japanese Orthopaedic Association (JOA) hip score, JOA Hip-disease Evaluation Questionnaire (JHEQ), forgotten joint score (FJS), and the 36 short-form questionnaires (SF-36 mental and physical) were evaluated. The leg length discrepancy, cup inclination and stem orientation were evaluated with radiographs. RESULTS: Among all the included hips, 37 patients (43.5%) retained the CERT, and 48 patients (56.5%) included the released CERT. There were no significant differences in the JOA hip scores, JHEQ, FJF-12 and SF-36 between the released and non-released groups. There were significant differences in sagittal stem alignments between groups. CONCLUSION: The CERT release in anterolateral muscle-sparing THA has a limited effect on post-operative clinical outcomes. The CERT release improved the femur exposure and is more invasive than the preserved CERT. We infer that the CERT should be maintained in patients with a wide range of motions, and release the CERT in inadequate femur canal preparation cases.

Improved Osseointegration of a TiNbSn Alloy with a Low Young's Modulus Treated with Anodic Oxidation.

Ti6Al4V alloy orthopedic implants are widely used as Ti6Al4V alloy is a biocompatible material and resistant to corrosion. However, Ti6Al4V alloy has higher Young's modulus compared with human bone. The difference of elastic modulus between bone and titanium alloy may evoke clinical problems because of stress shielding. To resolve this, we previously developed a TiNbSn alloy offering low Young's modulus and improved biocompatibility. In the present study, the effects of sulfuric acid anodic oxidation on the osseointegration of TiNbSn alloy were assessed. The apatite formation was evaluated with Scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy analyses. The biocompatibility of TiNbSN alloy was evaluated in experimental animal models using pull-out tests and quantitative histological analyses. The results of the surface analyses indicated that sulfuric anodic oxidation induced abundant superficial apatite formation of the TiNbSn alloy disks and rods, with a 5.1-µm-thick oxide layer and submicron-sized pores. In vivo, treated rods showed increased mature lamellar bone formation and higher failure loads compared with untreated rods. Overall, our findings indicate that anodic oxidation with sulfuric acid may help to improve the biocompatibility of TiNbSn alloys for osseointegration.

Effects of elastic intramedullary nails composed of low Young's modulus Ti-Nb-Sn alloy on healing of tibial osteotomies in rabbits.

Intramedullary nailing is widely performed for internal fixation of fractures. The applicable elasticity of materials composing intramedullary nails remains unclear. The present study aimed to evaluate the effects of the elastic property of ß-type titanium alloy nails on fracture healing compared with conventional Ti-6Al-4V alloy nails using a rabbit tibial osteotomy model. Two types of intramedullary nails composed of ß-type Ti-Nb-Sn alloy (Young's modulus: 37 GPa) or Ti-6Al-4V alloy (Young's modulus: 110 GPa) were used for osteotomy fixation in the tibiae of rabbits. At 4, 8, and 16 weeks postoperatively, microcomputed tomography (micro-CT) and three-point bending tests were performed. Micro-CT images showed that the callus volume was significantly larger in the Ti-Nb-Sn alloy group at 4 and 8 weeks. The callus bone mineral density did not differ at each time point. In mechanical testing, the maximum load was significantly higher at all time points in the Ti-Nb-Sn alloy group. Taken together, the elastic intramedullary nails composed of Ti-Nb-Sn alloy improved the mechanical properties of the bone healing site from the early phase to the remodeling phase. Adequate Young's modulus of the Ti-Nb-Sn alloy enhanced fracture union and bone strength restoration. The Ti-Nb-Sn alloy is a promising biomaterial for fracture fixation devices. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2018. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 700-707, 2019.

Biomechanical analysis of supra-acetabular insufficiency fracture using finite element analysis.

BACKGROUND: Supra-acetabular insufficiency fractures (SAIFs) occur in the upper acetabulum and are rare compared with insufficiency sacral, femoral head, or ischial fractures. However, SAIFs are known to occur in low grade trauma, and the underlying mechanism is still remained unclear. METHODS: We performed biomechanical analysis using finite element analysis to clarify the mechanisms underlying the development of SAIFs. Patient-specific models and bone mineral density (BMD) were derived from pelvic computed tomography data from two patients with SAIF (unaffected side) and two healthy young adults. The bone was assumed to be an isotropic, linearly elastic body. We assigned Young's modulus of each element to the pelvis based on the BMD, and reported the relationships for BMD-modulus. Clinically relevant loading conditions-walking and climbing stairs-were applied to the models. We compared the region of failure risk in each acetabulum using a maximum principal strain criterion. RESULTS: The average supra-acetabular BMD was less than that of the hemi-pelvis and femoral head, but was higher than that of the femoral neck and greater trochanter. Greater minimum principal strain was concentrated in the supra-acetabular portion in both the SAIF and healthy models. In the SAIF models, the higher region of the failure risk matched the fracture site on the acetabulum. CONCLUSIONS: Relative fragility causes compressive strain to concentrate in the upper acetabulum when walking and climbing stairs. When presented with a patient complaining of hip pain without apparent trauma or abnormal X-ray findings, physicians should consider the possibility of SAIF and perform magnetic resonance imaging for the diagnosis of SAIF.

Long-term results of a modified Spitzy shelf operation for developmental dysplasia of the hip in adults and adolescents.

The purpose of the current study was to retrospectively evaluate the long-term outcome of our shelf operation for acetabular dysplasia in adults and adolescents. We evaluated the outcome of shelf operation performed in 35 hips of 32 patients with acetabular dysplasia between 1978 and 1996. The mean age at the time of surgery was 30.6 years, and the mean follow-up period was 25.9 years. The pre-operative stage of osteoarthritis was Tönnis grade 0 in 12 hips and grade 1 in 23 hips. Clinical evaluation using the JOA hip score showed more than 85 of 100 points over 25 years. Radiologically, acetabular index was significantly improved after operation. Osteoarthritis deteriorated to grade 3 in 8 of 35 hips (23%) at an average 17.1 years, and accordingly 3 of those 8 hips were converted to THA. The shelf height was significantly higher in those which advanced to grade 3 than in those which did not. There were no significant differences in mean sharp angle, CE angle, AHI, and roundness index. Mean survival was 74% with grade 3 as the endpoint and 72% with THA conversion as the endpoint. Shelf operation provides satisfactory long-term outcome in adults and adolescents with acetabular dysplasia. Higher location of the shelf is a risk factor for advancement of osteoarthritis, whereas sphericity of the femoral head does not affect the long-term results. Further studies are needed to clarify the risk factors about OA progression among the patients with acetabular dysplasia, like as the assessment of three-dimensional morphology of hip joints.

Effects of intramedullary nails composed of a new ß-type Ti-Nb-Sn alloy with low Young's modulus on fracture healing in mouse tibiae.

The influence of Young's moduli of materials on the fracture healing process remains unclear. This study aimed to assess the effects of intramedullary nails composed of materials with low Young's moduli on fracture repair. We previously developed a ß-type Ti-Nb-Sn alloy with low Young's modulus close to that of human cortical bone. Here, we prepared two Ti-Nb-Sn alloys with Young's moduli of 45 and 78 GPa by heat treatment, and compared their effects on fracture healing. Fracture and nailing were performed in the right tibiae of C57BL/6 mice. The bone healing process was evaluated by microcomputed tomography (micro-CT), histomorphometry, and RT-PCR. We found larger bone volumes of fracture callus in the mice treated with the 45-GPa Ti-Nb-Sn alloy as compared with the 78-GPa Ti-Nb-Sn alloy in micro-CT analyses. This was confirmed with histology at day 14, with accelerated new bone formation and cartilage absorption in the 45-GPa Ti-Nb-Sn group compared with the 78-GPa Ti-Nb-Sn group. Acp5 expression was lower in the 45-GPa Ti-Nb-Sn group than in the 78-GPa Ti-Nb-Sn group at day 10. These findings indicate that intramedullary fixation with nails with a lower Young's modulus offer a greater capacity for fracture repair. Our 45-GPa Ti-Nb-Sn alloy is a promising material for fracture treatment implants. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2841-2848, 2018.

Apatite Formation and Biocompatibility of a Low Young's Modulus Ti-Nb-Sn Alloy Treated with Anodic Oxidation and Hot Water.

Ti-6Al-4V alloy is widely prevalent as a material for orthopaedic implants because of its good corrosion resistance and biocompatibility. However, the discrepancy in Young's modulus between metal prosthesis and human cortical bone sometimes induces clinical problems, thigh pain and bone atrophy due to stress shielding. We designed a Ti-Nb-Sn alloy with a low Young's modulus to address problems of stress disproportion. In this study, we assessed effects of anodic oxidation with or without hot water treatment on the bone-bonding characteristics of a Ti-Nb-Sn alloy. We examined surface analyses and apatite formation by SEM micrographs, XPS and XRD analyses. We also evaluated biocompatibility in experimental animal models by measuring failure loads with a pull-out test and by quantitative histomorphometric analyses. By SEM, abundant apatite formation was observed on the surface of Ti-Nb-Sn alloy discs treated with anodic oxidation and hot water after incubation in Hank's solution. A strong peak of apatite formation was detected on the surface using XRD analyses. XPS analysis revealed an increase of the H2O fraction in O 1s XPS. Results of the pull-out test showed that the failure loads of Ti-Nb-Sn alloy rods treated with anodic oxidation and hot water was greater than those of untreated rods. Quantitative histomorphometric analyses indicated that anodic oxidation and hot water treatment induced higher new bone formation around the rods. Our findings indicate that Ti-Nb-Sn alloy treated with anodic oxidation and hot water showed greater capacity for apatite formation, stronger bone bonding and higher biocompatibility for osteosynthesis. Ti-Nb-Sn alloy treated with anodic oxidation and hot water treatment is a promising material for orthopaedic implants enabling higher osteosynthesis and lower stress disproportion.