Zinc Treatment of Tea Plants Improves the Synthesis of Trihydroxylated Catechins via Regulation of the Zinc-Sensitive Protein CsHIPP3.

The tea plant (Camellia sinensis [L.] O. Kussntze) is a global economic crop. Zinc treatment of tea plants can enhance catechin biosynthesis. However, the underlying molecular mechanism behind catechin formation through zinc regulation remains unclear. This study identified a zinc-responsive protein, C. sinensis heavy metal-associated isoprenylated plant protein 3 (CsHIPP3), from zinc-treated tea seedlings. CsHIPP3 expression was positively correlated with trihydroxylated catechin (TRIC) content. CsF3'5'H1 is a crucial regulator of the TRIC synthesis pathway. The interaction between CsHIPP3 and CsF3'5'H1 was assessed using bimolecular fluorescence complementation, firefly luciferase complementation imaging, and pulldown experiments. CsHIPP3 knockdown using virus-induced gene silencing technology decreased the content of each component of TRICs. Compared with the control, the relative catechin content was reduced by 40.12-55.39%. Co-overexpression of CsHIPP3 and CsF3'5'H1 significantly elevated the TRIC content in tea leaves and calli. Moreover, the TRIC content in transient co-overexpression leaves was 1.44-fold higher than that of the control group, and tea callus was 50.83% higher in transient co-overexpression than in the wild type. Thus, zinc-regulated TRIC synthesis in a zinc-rich environment was mediated by binding CsHIPP3 with CsF3'5'H1 to promote TRIC synthesis and accumulation.

Plant growth-promoting rhizobacteria (PGPR) improve the growth and quality of several crops.

Plant growth-promoting rhizobacteria (PGPR) are known to have the effect of promoting plant growth. In this paper, three PGPR strains were selected from the previous work, which had plant growth-promoting activities such as phosphate solubilization, nitrogen fixation, phosphorus mobilization, etc. These strains named FJS-3(Burkholderia pyromania), FJS-7(Pseudomonas rhodesiae), and FJS-16(Pseudomonas baetica), respectively, were prepared into solid biological agents. Three widely planted commercial crops (tea plant, tobacco, and chili pepper) were selected for PGPR growth promotion verification. The results showed that the new shoots of tea seedlings under PGPR treatment were much more than the control. We also used tobacco, another important crop in Guizhou, to test the growth-promoting effect of individual bacteria, and the results showed that each of them could promote the growth of tobacco plants, and FJS-3(Burkholderia pyrrocinia) had the best effect. In addition, we carried out experiments on tobacco and pepper using multi-strain PGPR, the tobacco plants' height, fresh, and root weight increased by 30.15 %, 37.36 %, and 54.5 %, respectively, and the pepper plants' increased by 30.10 %, 56.38 % and 43.18 %, respectively, which both showed significantly better effects than that of a single strain. To further test the field performance, field trials were carried out in a mature Longjing43 tea plantation in Guizhou. There were four treatments: no fertilization (T1), combined application of PGPR biological agent and compound fertilizer (T2), only application of PGPR (T3), and only application of compound fertilizer (T4). In terms of yield, grouped with or without PGPR, there was a 15.38 % (T2:T4) and 92.31 % (T3:T1) increase between them, respectively. The tea's yield and tea flavor substances such as tea polyphenols, caffeine, and theanine were detected, and the T2 showed the most significant positive effect on both sides. Especially, an important indicator of Matcha green tea is the color, chlorophyll content was then tested, and PGPR application increased it and improved the appearance. All these results demonstrated that the PGPR we screened could significantly promote plant growth and quality improvement, and had good application potential in crop planting, which could contribute to environmental protection and economic growth.

Thermal Equation of State of Cubic Silicon Carbide at High Pressures.

We have performed in situ X-ray diffraction measurements of cubic silicon carbide (SiC) with a zinc-blende crystal structure (B3) at high pressures and temperatures using multi-anvil apparatus. The ambient volume inferred from the compression curves is smaller than that of the starting material. Using the 3rd-order Birch-Murnaghan equation of state and the Mie-Grüneisen-Debye model, we have determined the thermoelastic parameters of the B3-SiC to be K0=228±3 GPa, K0',=4.4±0.4, q=0.27±0.37, where K0, K0' and q are the isothermal bulk modulus, its pressure derivative and logarithmic volume dependence of the Grüneisen parameter, respectively. Using the 3rd-order Birch-Murnaghan EOS with the thermal expansion coefficient, the thermoelastic parameters have been found as K0=221±3 GPa, K0',=5.2±0.4, α0=0.90±0.02 ⋅ 10-5 ⋅ K-1, where α0 is the thermal expansion coefficient at room pressure and temperature. We have determined that paired B3-SiC - MgO calibrants can be used to estimate pressure and temperature simultaneously in ultrahigh-pressure experiments up to 60 GPa.

ATF4 in cellular stress, ferroptosis, and cancer.

Activating transcription factor 4 (ATF4), a member of the ATF/cAMP response element-binding (CREB) family, plays a critical role as a stress-induced transcription factor. It orchestrates cellular responses, particularly in the management of endoplasmic reticulum stress, amino acid deprivation, and oxidative challenges. ATF4's primary function lies in regulating gene expression to ensure cell survival during stressful conditions. However, when considering its involvement in ferroptosis, characterized by severe lipid peroxidation and pronounced endoplasmic reticulum stress, the ATF4 pathway can either inhibit or promote ferroptosis. This intricate relationship underscores the complexity of cellular responses to varying stress levels. Understanding the connections between ATF4, ferroptosis, and endoplasmic reticulum stress holds promise for innovative cancer therapies, especially in addressing apoptosis-resistant cells. In this review, we provide an overview of ATF4, including its structure, modifications, and functions, and delve into its dual role in both ferroptosis and cancer.

Targeting paraptosis in cancer: opportunities and challenges.

Cell death can be classified into two primary categories: accidental cell death and regulated cell death (RCD). Within RCD, there are distinct apoptotic and non-apoptotic cell death pathways. Among the various forms of non-apoptotic RCD, paraptosis stands out as a unique mechanism characterized by distinct morphological changes within cells. These alterations encompass cytoplasmic vacuolization, organelle swelling, notably in the endoplasmic reticulum and mitochondria, and the absence of typical apoptotic features, such as cell shrinkage and DNA fragmentation. Biochemically, paraptosis distinguishes itself by its independence from caspases, which are conventionally associated with apoptotic death. This intriguing cell death pathway can be initiated by various cellular stressors, including oxidative stress, protein misfolding, and specific chemical compounds. Dysregulated paraptosis plays a pivotal role in several critical cancer-related processes, such as autophagic degradation, drug resistance, and angiogenesis. This review provides a comprehensive overview of recent advancements in our understanding of the mechanisms and regulation of paraptosis. Additionally, it delves into the potential of paraptosis-related compounds for targeted cancer treatment, with the aim of enhancing treatment efficacy while minimizing harm to healthy cells.

Sugarcane/soybean intercropping with reduced nitrogen addition promotes photosynthesized carbon sequestration in the soil.

Introduction: Sugarcane/soybean intercropping with reduced nitrogen (N) addition has improved soil fertility and sustainable agricultural development in China. However, the effects of intercropping pattern and N fertilizer addition on the allocation of photosynthesized carbon (C) in plant-soil system were far less understood. Methods: In this study, we performed an 13CO2 pulse labeling experiment to trace C footprints in plant-soil system under different cropping patterns [sugarcane monoculture (MS), sugarcane/soybean intercropping (SB)] and N addition levels [reduced N addition (N1) and conventional N addition (N2)]. Results and discussion: Our results showed that compared to sugarcane monoculture, sugarcane/soybean intercropping with N reduced addition increased sugarcane biomass and root/shoot ratio, which in turn led to 23.48% increase in total root biomass. The higher root biomass facilitated the flow of shoot fixed 13C to the soil in the form of rhizodeposits. More than 40% of the retained 13C in the soil was incorporated into the labile C pool [microbial biomass C (MBC) and dissolved organic C (DOC)] on day 1 after labeling. On day 27 after labeling, sugarcane/soybean intercropping with N reduced addition showed the highest 13C content in the MBC as well as in the soil, 1.89 and 1.14 times higher than the sugarcane monoculture, respectively. Moreover, intercropping pattern increased the content of labile C and labile N (alkaline N, ammonium N and nitrate N) in the soil. The structural equation model indicated that the cropping pattern regulated 13C sequestration in the soil mainly by driving changes in labile C, labile N content and root biomass in the soil. Our findings demonstrate that sugarcane/soybean intercropping with reduced N addition increases photosynthesized C sequestration in the soil, enhances the C sink capacity of agroecosystems.

The transcription factor CsS40 negatively regulates TCS1 expression and caffeine biosynthesis in connection to leaf senescence in Camellia sinensis.

Caffeine is considered as one of the most important bioactive components in the popular plant beverages tea, cacao, and coffee, but as a wide-spread plant secondary metabolite its biosynthetic regulation at transcription level remains largely unclear. Here, we report a novel transcription factor Camellia sinensis Senescnece 40 (CsS40) as a caffeine biosynthesis regulator, which was discovered during screening a yeast expression library constructed from tea leaf cDNAs for activation of tea caffeine synthase (TCS1) promoter. Besides multiple hits of the non-self-activation CsS40 clones that bound to and activated TCS1 promoter in yeast-one-hybrid assays, a split-luciferase complementation assay demonstrated that CsS40 acts as a transcription factor to activate the CsTCS1 gene and EMSA assay also demonstrated that CsS40 bound to the TCS1 gene promoter. Consistently, immunofluorescence data indicated that CsS40-GFP fusion was localized in the nuclei of tobacco epidermal cells. The expression pattern of CsS40 in 'Fuding Dabai' developing leaves was opposite to that of TCS1; and knockdown and overexpression of CsS40 in tea leaf calli significantly increased and decreased TCS1 expression levels, respectively. The expression levels of CsS40 were also negatively correlated to caffeine accumulation in developing leaves and transgenic calli of 'Fuding Dabai'. Furthermore, overexpression of CsS40 reduced the accumulation of xanthine and hypoxanthine in tobacco plants, meanwhile, increased their susceptibility to aging. CsS40 expression in tea leaves was also induced by senescence-promoting hormones and environmental factors. Taken together, we showed that a novel senescence-related factor CsS40 negatively regulates TCS1 and represses caffeine accumulation in tea cultivar 'Fuding Dabai'. The study provides new insights into caffeine biosynthesis regulation by a plant-specific senescence regulator in tea plants in connection to leaf senescence and hormone signaling.

Toughening oxide glasses through paracrystallization.

Glasses, unlike crystals, are intrinsically brittle due to the absence of microstructure-controlled toughening, creating fundamental constraints for their technological applications. Consequently, strategies for toughening glasses without compromising their other advantageous properties have been long sought after but elusive. Here we report exceptional toughening in oxide glasses via paracrystallization, using aluminosilicate glass as an example. By combining experiments and computational modelling, we demonstrate the uniform formation of crystal-like medium-range order clusters pervading the glass structure as a result of paracrystallization under high-pressure and high-temperature conditions. The paracrystalline oxide glasses display superior toughness, reaching up to 1.99 ± 0.06 MPa m1/2, surpassing any other reported bulk oxide glasses, to the best of our knowledge. We attribute this exceptional toughening to the excitation of multiple shear bands caused by a stress-induced inverse transformation from the paracrystalline to amorphous states, revealing plastic deformation characteristics. This discovery presents a potent strategy for designing highly damage-tolerant glass materials and emphasizes the substantial influence of atomic-level structural variation on the properties of oxide glasses.

Genome-Wide Investigation and Functional Analysis Reveal That CsKCS3 and CsKCS18 Are Required for Tea Cuticle Wax Formation.

Cuticular wax is a complex mixture of very long-chain fatty acids (VLCFAs) and their derivatives that constitute a natural barrier against biotic and abiotic stresses on the aerial surface of terrestrial plants. In tea plants, leaf cuticular wax also contributes to the unique flavor and quality of tea products. However, the mechanism of wax formation in tea cuticles is still unclear. The cuticular wax content of 108 germplasms (Niaowang species) was investigated in this study. The transcriptome analysis of germplasms with high, medium, and low cuticular wax content revealed that the expression levels of CsKCS3 and CsKCS18 were strongly associated with the high content of cuticular wax in leaves. Hence, silencing CsKCS3 and CsKCS18 using virus-induced gene silencing (VIGS) inhibited the synthesis of cuticular wax and caffeine in tea leaves, indicating that expression of these genes is necessary for the synthesis of cuticular wax in tea leaves. The findings contribute to a better understanding of the molecular mechanism of cuticular wax formation in tea leaves. The study also revealed new candidate target genes for further improving tea quality and flavor and cultivating high-stress-resistant tea germplasms.

Enhanced Properties of Tailored Alumina-Magnesia-Based Dry Ramming Mixes by Calcium Magnesium Aluminate (CMA).

To achieve the goal of "dual-carbon", induction furnaces with high efficiency and energy-saving advantages are paid more attention in the foundry and metallurgy industries. The service life and safety of induction furnaces strongly depended on the lining because expansion and forward sintering could result in the erosion and slag resistance of the lining. Focusing on the tailoring properties of alumina-magnesia-based dry ramming mixes, calcined magnesia particles were replaced with the novel multi-component materials of calcium magnesium aluminate (CaO-MgO-Al2O3, CMA) with a size of 200 mesh. Properties such as the bulk density, apparent porosity, strength, and slag corrosion resistance of alumina-magnesia-based dry ramming mix containing CMA were evaluated contrastively. The results demonstrate that the penetration index of manganese-bearing slag in dry ramming mixes first decreased and then slightly increased with the addition of CMA. Meanwhile, the permanent linear change in dry ramming mixes was gradually reduced. When the addition of CMA reached 4 wt%, the strength of the dry ramming mixes was slightly greater than the reference, and the slag penetration index was just 75% of the latter.

Genome-wide characterization of the U-box gene in Camellia sinensis and functional analysis in transgenic tobacco under abiotic stresses.

Plants U-box genes are crucial for plant survival, and they extensively regulate plant growth, reproduction and development as well as coping with stress and other processes. In this study, we identified 92 CsU-box genes through genome-wide analysis in the tea plant (Camellia sinensis), all of them contained the conserved U-box domain and were divided into 5 groups, which supported by the further genes structure analysis. The expression profiles in eight tea plant tissues and under abiotic and hormone stresses were analyzed using the TPIA database. 7 CsU-box genes (CsU-box27/28/39/46/63/70/91) were selected to verify and analyze expression patterns under PEG-induced drought and heat stress in tea plant respectively, the qRT-PCR results showed consistent with transcriptome datasets; and the CsU-box39 were further heterologous expressed in tobacco to perform gene function analysis. Phenotypic analyses of overexpression transgenic tobacco seedlings and physiological experiments revealed that CsU-box39 positively regulated the plant response to drought stress. These results lay a solid foundation for studying the biological function of CsU-box, and will provide breeding strategy basis for tea plant breeders.

Composition, processing, and quality control of whole flaxseed products used to fortify foods.

Whole flaxseed (flour) as a good source of omega-3 fatty acid and phytochemicals with excellent nutritional and functional attributes has been used to enrich foods for health promotion and disease prevention. However, several limitations and contemporary challenges still impact the development of whole flaxseed (flour)-enriched products on the global market, such as naturally occurring antinutritional factors and entrapment of nutrients within food matrix. Whole flaxseed (flour) with different existing forms could variably alter the techno-functional performance of food matrix, and ultimately affect the edible qualities of fortified food products. The potential interaction mechanism between the subject and object components in fortified products has not been elucidated yet. Hence, in this paper, the physical structure and component changes of flaxseed (flour) by pretreatments coupled with their potential influences on the edible qualities of multiple fortified food products were summarized and analyzed. In addition, several typical food products, including baked, noodle, and dairy products were preferentially selected to investigate the potential influencing mechanisms of flaxseed (flour) on different substrate components. In particular, the altered balance between water absorption of flaxseed protein/gum polysaccharides and the interruption of gluten network, lipid lubrication, lipid-amylose complexes, syneresis, and so forth, were thoroughly elucidated. The overall impact of incorporating whole flaxseed (flour) on the quality and nutritional attributes of fortified food products, coupled with the possible solutions against negative influences are aimed. This paper could provide useful information for expanding the application of whole flaxseed (flour) based on the optimal edible and nutritional properties of fortified food products.

Influence of different thermal treatment methods on the processing qualities of sesame seeds and cold-pressed oil.

This study investigated the impact of multiple thermal treatments (explosion-puffing, microwave, and roasting) on the processing qualities of sesame seeds and cold-pressed oil. The scanning electron microscopy (SEM) showed fissures and cavities of sesame seed surface upon thermal treatments. The microwave treatment promoted the maximum conversion of sesamolin into sesamol in the sesame oil. Compared with other treatments, explosion-puffing treatment resulted in most significant increases in the multiple beneficial phytochemicals, as well as in vitro antioxidant properties determined by 2,2-dipheny1-1-picrylhydrazyl radical (DPPH) radical scavenging activity, Ferric reducing antioxidant power (FRAP) and oxidative stability index (OSI). Additionally, thermal treatment processing caused varying degrees of damage of crude protein, total amino acids (TAA) and protein structure (tertiary and second structure). In which, explosion-puffing achieved minimal reduction in the first two indicators. Collectively, explosion-puffing might be a preferable thermal treatment method for industrial sesame processing with improved quality specifications.

Oxygen vacancy-mediated peroxydisulfate activation and singlet oxygen generation toward 2,4-dichlorophenol degradation on specific CuO1-x nanosheets.

Durable and stable removal of 2,4-dichlorophenpl (2,4-DCP) by CuO1-x nanosheets is reported. CuO1-x nanosheets were fabricated by a simple defect engineering strategy and greatly increased the efficiency of peroxydisulfate (PDS) activation to improve 2,4-DCP removal by introducing abundant oxygen vacancy (Vo) to produce an electron-rich surface. Results showed that CuO1-x nanosheets exposed more Vo as active sites for PDS activation as compared with that of CuO nanoparticles, giving rise to dramatic enhancement of catalytic performance with ultrahigh reaction rate that is qualified for serving in flow filtration system, completely degrading 100 mg L-1 of 2,4-DCP within 3 s of residence time. Besides, experimental studies confirmed that 1O2 generated by Vo - mediated PDS activation plays the dominate role in the degradation of contaminants. Relative to the previously reported CuO/PDS systems, the obtained CuO1-x nanosheets demonstrated 2.7 times higher specific PDS activity and 67 times higher specific CuO activity for 2,4-DCP removal. Our study not only improves the fundamental understanding of active sites in morphologically tunable metal oxides but also proposes a guideline for future research and engineering application of persulfate.

Encapsulation of Functional Plant Oil by Spray Drying: Physicochemical Characterization and Enhanced Anti-Colitis Activity.

In this study, an encapsulation system was developed for functional plant oil delivery. Through a series of orthogonal experiments and single factor experiments, the raw material compositions, emulsification conditions, and spray drying conditions for the preparation of flaxseed oil and safflower seed oil powders were optimized, and the final encapsulation efficiency was as high as 99% with approximately 50% oil loading. The storage stability experiments showed that oil powder's stability could maintain its physicochemical properties over six months. Oral supplementation of the spray-dried flaxseed oil powder exhibited a significant and better effect than flaxseed oil on alleviating colitis in C57BL/6J mice. It suppressed the pro-inflammatory cell factors, including IL-6 and TNF-α, and repaired gut microbial dysbiosis by increasing the microbial diversity and promoting the proliferation of probiotic taxa such as Allobaculum. This work suggests that spray-dried flaxseed oil powder has great potential as a nutraceutical food, with spray drying being a good alternative technique to improve its bioactivity.

Light-Activated Reactive Oxygen Species-Responsive Nanocarriers for Enhanced Photodynamic Immunotherapy of Cancer.

Exploring polymeric nanoplatforms combined with reactive oxygen species (ROS) responsiveness with mitochondria targeting has emerged as an effective strategy for enhanced photodynamic therapy (PDT). Amphiphilic copolymers were synthesized by reacting acrylamide thioketal (TK) linkers with amino-terminated triphenylphosphonium-polyethylene glycol and dodecylamine for encapsulating chlorin e6 (Ce6) via self-assembly. Then, anionic cladding with tumor targeting deshelled in tumor acidic microenvironments was surface-anchored by electrostatic forces (BioPEGDMA@RM). After sequential targeting to the mitochondria of cancerous cells, BioPEGDMA@RM could be light-activated with Ce6 released upon ROS cleavage of TK linkages. It was found that Ce6-loaded BioPEGDMA@RM exhibited higher cytotoxicity on CT26 cells and performed stronger ability on the production of ROS than that without TK linkers. Moreover, a minimum illumination of 3 and 5 min could be required for achieving the maximum release of Ce6 and high in vitro cytotoxicity for Ce6-loaded BioPEGDMA@RM, respectively. Furthermore, Ce6-loaded BioPEGDMA@RM showed 1.29-fold and 1.21-fold higher tumor inhibition on BALB/c nude mice and Kunming mice and stimulated immunologic reactions with more generation of IFN-γ and TNF-α and activation of CD3+, CD4+, and CD8+ T-lymphocytes and DCs than that of Ce6-loaded nanoparticles without TK bonds. This work provided an academic reference for the development of ROS-responsive drug delivery systems for advanced PDT efficiency.

Effect of hepatocyte growth factor on mice with hypoxic pulmonary arterial hypertension: a preliminary study. / è‚ç»†èƒžç”Ÿé•¿å› å­å¯¹ä½Žæ°§æ€§è‚ºåŠ¨è„‰é«˜åŽ‹å°é¼ å½±å“çš„åˆæ­¥ç ”ç©¶.

OBJECTIVES: To study the association between hepatocyte growth factor (HGF) and treatment response in mice with hypoxic pulmonary arterial hypertension (HPAH) and the possibility of HGF as a new targeted drug for HPAH. METHODS: After successful modeling, the HPAH model mice were randomly divided into two groups: HPAH group and HGF treatment group (tail vein injection of recombinant mouse HGF 1 mg/kg), with 10 mice in each group. Ten normal mice were used as the control group. After 5 weeks, echocardiography was used to measure tricuspid peak velocity, right ventricular systolic pressure, right ventricular hypertrophy index, and right ventricular/body weight ratio; the Griess method was used to measure the content of nitric oxide in serum; ELISA was used to measure the serum level of endothelin-1; transmission electron microscopy was used to observe changes in the ultrastructure of pulmonary artery. RESULTS: Compared with the HGF treatment and normal control groups, the HPAH group had significantly higher tricuspid peak velocity, right ventricular systolic pressure, right ventricular hypertrophy index, and right ventricular/body weight ratio (P<0.05). The transmission electron microscopy showed that the HPAH group had massive destruction of vascular endothelial cells and disordered arrangement of the elastic membrane of arteriolar intima with rupture and loss. The structure of vascular endothelial cells was almost complete and the structure of arterial intima elastic membrane was almost normal in the HGF treatment group. Compared with the normal control and HGF treatment groups, the HPAH group had significantly higher serum levels of nitric oxide and endothelin-1 (P<0.05). CONCLUSIONS: Increasing serum HGF level can alleviate the impact of HPAH on the cardiovascular system of mice, possibly by repairing endothelial cell injury, improving vascular remodeling, and restoring the normal vasomotor function of pulmonary vessels.

Encapsulated Microstructures of Beneficial Functional Lipids and Their Applications in Foods and Biomedicines.

Beneficial functional lipids are essential nutrients for the growth and development of humans and animals, which nevertheless possess poor chemical stability because of heat/light-sensitivity. Various encapsulation technologies have been developed to protect these nutrients against adverse factors. Different microstructures are exhibited through different encapsulation methods, which influence the encapsulation efficiency and release behavior at the same time. This review summarizes the effects of preparation methods and process parameters on the microstructures of capsules at first. The mechanisms of the different microstructures on encapsulation efficiency and controlled release behavior of core materials are analyzed. Next, a comprehensive overview on the beneficial functional lipids capsules in the latest food and biomedicine applications are provided as well as the matching relationship between the microstructures of the capsules and applications are discussed. Finally, the remaining challenges and future possible directions that have potential interest are outlined. The purpose of this review is to convey the construction of beneficial functional lipids capsules and the function mechanism, a critical analysis on its current status and challenges, and opinions on its future development. This review is believed to promote communication among the food, pharmacy, agronomy, engineering, and nutrition industries.

sp2-to-sp3 transitions in graphite during cold-compression.

Pressure-induced sp2-to-sp3 transitions in graphite have been studied for decades by experiments and simulations. In general, pressures of 15-18 GPa are needed to initiate structural transitions in graphite at room temperature, and the high-pressure phases are usually unquenchable, as evidenced by in situ resistivity and optical transmittance measurements, X-ray diffraction (XRD), and inelastic X-ray scattering (IXS). However, our in situ Raman results show that the onset transition pressure can be as low as 9.7 GPa when using the methanol-ethanol-water (MEW) mixture as the pressure-transmitting medium (PTM), indicated by an additional GD Raman peak caused by the sp3 bonding between adjacent graphite layers. Moreover, using a combination of XRD, Raman, X-ray photoelectron spectroscopy (XPS), and high-resolution transmission electron microscopy (HRTEM), we show that a small amount of sp3 bonds associated with a unique feature of cross stacking are present in the recovered samples. Our findings will be useful to understand the intricate structural transitions in graphite-like materials under compression.