Morphology and Composition of Lumbar Intervertebral Discs: Comparative Analyses of Manual Measurement and Computer-Assisted Algorithms.

BACKGROUND: The morphology and internal composition, particularly the nucleus-to-cross sectional area (NP-to-CSA) ratio of the lumbar intervertebral discs (IVDs), is important information for finite element models (FEMs) of spinal loadings and biomechanical behaviors, and, yet, this has not been well investigated and reported. METHODS: Anonymized MRI scans were retrieved from a previously established database, including a total of 400 lumbar IVDs from 123 subjects (58 F and 65 M). Measurements were conducted manually by a spine surgeon and using two computer-assisted segmentation algorithms, i.e., fuzzy C-means (FCM) and region growing (RG). The respective results were compared. The influence of gender and spinal level was also investigated. RESULTS: Ratios derived from manual measurements and the two computer-assisted algorithms (FCM and RG) were 46%, 39%, and 38%, respectively. Ratios derived manually were significantly larger. CONCLUSIONS: Computer-assisted methods provide reliable outcomes that are traditionally difficult for the manual measurement of internal composition. FEMs should consider the variability of NP-to-CSA ratios when studying the biomechanical behavior of the spine.

Efficacy of an Omaha system-based remote ergonomic intervention program on self-reported work-related musculoskeletal disorders (WMSDs) - A randomized controlled study.

Purpose: Heavy biomechanical loadings at workplaces may lead to high risks of work-related musculoskeletal disorders. This study aimed to explore the efficacy of an Omaha System-based remote ergonomic intervention program on self-reported work-related musculoskeletal disorders among frontline nurses. Materials and methods: From July to October 2020, 94 nurses with self-reported pain in one of the three body parts, i.e., neck, shoulder, and low back, were selected and were randomly divided into two groups. The intervention group received a newly developed remote program, where the control group received general information and guidance on health and life. Program outcome was evaluated by a quick exposure check approach. Results: After 6 weeks, the intervention group exhibited significantly less stress in the low back, neck, and shoulder/forearms, compared to the control group (p < 0.05). In addition, the occurrence of awkward postures, such as extreme trunk flexion or twisting, was also significantly reduced (p < 0.05). Conclusions: The newly developed Omaha System-based remote intervention program may be a valid alternative to traditional programs for frontline nurses during the COVID-19 pandemic, reducing biomechanical loadings and awkward postures during daily nursing operations.

Gait Asymmetry Variation in Kinematics, Kinetics, and Muscle Force along with the Severity Levels of Knee Osteoarthritis.

OBJECTIVE: Knee osteoarthritis (OA) patients exhibit greater gait asymmetry than healthy controls. However, gait asymmetry in kinematics, kinetics and muscle forces across patients with different severity levels of knee OA is still unknown. The study aimed to investigate the changes of gait asymmetry in lower limb kinematics, kinetics, and muscle force across patients with different severity levels of knee OA. METHODS: This is a cross-sectional study. From January 2020 to January 2021, 118 patients with symptomatic and radiographic medial knee OA were categorized into three groups using the Kellgren and Lawrence scale (mild: grade 1 and 2, n = 37; moderate: grade 3, n = 31; severe: grade 4, n = 50). During self-paced walking, marker trajectories and ground reaction forces data were recorded. Musculoskeletal simulations were used to determine gait kinematics, kinetics, and muscle force. One-way analysis of variance with Tukey's post-hoc test was used to evaluate group difference. Paired-sample t-test was used to compared the between-limb difference. RESULTS: In the Severe group, significantly greater asymmetry index in knee flexion/extension range of motion (45%) was observed with a greater value on the contralateral side (p < 0.01), compared to the Mild (15%) and Moderate (15%) groups. Significantly higher peak hip contact force (JCF) on the contralateral side was found in the Mild (more affected side: 3.80 ± 0.67 BW, contralateral side: 4.01 ± 0.58 BW), Moderate (more affected side: 3.67 ± 0.56 BW, contralateral side: 4.07 ± 0.81 BW), and Severe groups (more affected side: 3.66 ± 0.79 BW, contralateral side: 3.94 ± 0.64 BW) (p < 0.05). Significantly greater gluteus medius muscle force on the contralateral side was found in Mild (more affected side: 0.48 ± 0.09 BW, contralateral side: 0.52 ± 0.12 BW), Moderate (more affected side: 0.45 ± 0.10 BW, contralateral side: 0.51 ± 0.15 BW), and Severe groups (more affected side: 0.42 ± 0.15 BW, contralateral side: 0.47 ± 0.12 BW) (p < 0.05). The contralateral side showing significantly higher peak knee adduction moment and medial knee JCF was only observed in the Mild group (p < 0.05). CONCLUSIONS: Gait asymmetry in kinematics and muscle forces increased from mild to severe knee OA. Asymmetrical gait pattern tends to transfer loads from the more affected side to the contralateral side. Peak hip JCF and gluteus medius muscle force can be used to detect this asymmetrical gait pattern in patients with knee OA, regardless of severity levels.

Gait asymmetry of lower extremities reduced immediately after minimally invasive surgery among patients with lumbar disc herniation.

BACKGROUND: Lumbar disc herniation patients with increased pain exhibit greater gait asymmetry in stance time, swing time and single support time. Percutaneous endoscopic lumbar discectomy, as a minimally invasive surgical procedure has been used to treat patients with lumbar disc herniation. The objective of this study was to evaluate the immediate impact of the percutaneous endoscopic lumbar discectomy on gait asymmetry in spatiotemporal and kinetic parameters among lumbar disc herniation patients. METHODS: Marker trajectories and ground reaction forces were measured during walking among 67 lumbar disc herniation patients and 15 healthy controls. Spatiotemporal gait parameters were analyzed via Visual3D. Muscle force and joint contact force were calculated with OpenSim. Gait asymmetry of those parameters were assessed with asymmetry index. FINDINGS: After surgery, gait asymmetry in gait cycle time, step length, peak biceps femoris long head, tensor fasciae latae and rectus femoris muscle forces, and peak hip and knee joint contact forces reduced immediately. Postoperatively, increased gait cycle time and decreased step length were found in the affected side. Moreover, decreased peak biceps femoris long head, tensor fasciae latae and rectus femoris muscle forces, and peak hip joint contact force were observed in the contralateral side. INTERPRETATION: These results suggested compensation strategy that biceps femoris long head, tensor fasciae latae and rectus femoris in the contralateral side were mainly used to compensate the affected side preoperatively in lumbar disc herniation patients, with less compensation between lower limbs after surgery, which may provide an insight into postoperative rehabilitation.

Evaluating Different Measures of Low Back Pain Among U.S. Manual Materials Handling Workers: Comparisons of Demographic, Psychosocial, and Job Physical Exposure.

OBJECTIVE: To examine differences in demographic, psychosocial, and job physical exposure risk factors between multiple low back pain (LBP) outcomes in a prospective cohort of industrial workers. BACKGROUND: LBP remains a leading cause of lost industrial productivity. Different case definitions involving pain (general LBP), medication use (M-LBP), seeking healthcare (H-LBP), and lost time (L-LBP) are often used to study LBP outcomes. However, the relationship between these outcomes remains unclear. METHOD: Demographic, health status, psychosocial, and job physical exposure risk factors were quantified for 635 incident-eligible industrial workers. Incident cases of LBP outcomes and pain symptoms were quantified and compared across the four outcomes. RESULTS: Differences in age, gender, medical history, and LBP history were found between the four outcomes. Most incident-eligible workers (67%) suffered an LBP outcome during follow-up. Cases decreased from 420 for LBP (25.4 cases/100 person-years) to 303 for M-LBP (22.0 cases/100 person-years), to 151 for H-LBP (15.6 cases/100 person-years), and finally to 56 for L-LBP (8.7 cases/100 person-years). Conversely, pain intensity and duration increased from LBP to H-LBP. However, pain duration was relatively lower for L-LBP than for H-LBP. CONCLUSION: Patterns of cases, pain intensity, and pain duration suggest the influence of the four outcomes. However, few differences in apparent risk factors were observed between the outcomes. Further research is needed to establish consistent case definitions. APPLICATION: Knowledge of patterns between different LBP outcomes can improve interpretation of research and guide future research and intervention studies in industry.

Psychosocial Factors and Low Back Pain Outcomes in a Pooled Analysis of Low Back Pain Studies.

OBJECTIVE: Assessment of possible relationships between work-related psychosocial measures and self-reported low back pain (LBP) outcomes in a large pooled dataset of 1929 participants from 82 facilities in the United States. METHODS: Pooled data from three prospective cohort studies were used to calculate odds ratios (OR) and 95% confidence intervals (95% CI) for relationships between psychosocial factors and the LBP outcomes. Personal and occupational confounders were controlled for in adjusted Logistic regression models. RESULTS: Supervisor support and job satisfaction were significantly (P < 0.05) related to all three LBP outcomes. Other psychosocial factors were significantly (P < 0.05) associated with at least one of the LBP outcomes. Adjusted ORs ranged from approximately 1.50 to 3.50 for most associations. CONCLUSIONS: There is a significant relationship between work-related psychosocial measures and LBP outcomes.

Regression Models for the Erector Spinae Muscle Mass (ESMM) Cross-Sectional Area: Asymptomatic Populations.

Understanding low back muscle morphology is critical to understanding spinal loading and the underlying injury mechanisms, which help in characterizing risk and, therefore, minimize low back pain injuries. Individualized erector spinae muscle mass (ESMM) cross-sectional area (CSA) allows biomechanics practitioners to calculate individualized force generating capacities and spinal loadings for given tasks. The objective is to perform morphological analyses and then provide regression models to estimate the ESMM CSA of an individual with his/her subject characteristics. Thirty-five subjects (13 females and 22 males) without low back pain (LBP) history were included in this magnetic resonance imaging (MRI) study. Axial-oblique scans of low back region were used to measure the ESMM CSA. Subject demographics and anthropometrics were obtained and regressed over the ESMM CSA. Best-subset regression analyses were performed. Lean body mass (LBM) and the ankle, wrist, and head indexes were the most frequent predictive variables. Regression models with easy-to-measure variables showed smaller predictive power and increased estimation error compared to other regression models. Practitioners should consider this trade-off between model accuracy and complexity. An individual's ESMM CSA could be estimated by his/her individual characteristics, which enables biomechanical practitioners to estimate individualized low back force capacity and spinal loading.

Biomechanical Evaluations of Bed-to-Wheelchair Transfer: Gait Belt Versus Walking Belt.

Nursing personnel, particularly caregivers who frequently perform manual patient transfer tasks, are at risk for work-related musculoskeletal disorders (WMSDs). The purpose of this study was to perform biomechanical evaluations of bed-to-wheelchair transfer using two low-cost assistive devices: walking belt and gait belt. Twenty-eight college students, serving as caregivers, transferred 14 students, serving as patients. "Caregiver" spinal loading and strength requirements at major joints were measured using a 3D Static Strength Prediction Model. "Caregiver"-perceived stresses were assessed using the Borg CR-10 Scale. "Patient" safety and comfort ratings were determined using Likert-type scales. The findings indicated that transferring "patients" using walking belts with a pulling technique produced significantly lower biomechanical stress than using gait belts. "Patients" also felt more comfortable and safer during walking belt transfers. It is recommended that health care facilities should consider use of walking belts in place of gait belts to transfer partially weight-bearing patients.

Sit-To-Stand Lift: Effects of Lifted Height on Weight Borne and Upper Extremity Strength Requirements.

To prevent back and shoulder injuries to nursing personnel, sit-to-stand lifts are used to transfer partial-weight-bearing patients with upper extremity strength. However, the weight-bearing capacity and upper extremity strength required of patients have not been defined. The objectives of this study were to determine: (a) the percentage of body weight borne by the patient when lifted to different heights in the lift and (b) whether a patient needs upper extremity strength. Nineteen healthy normal-weight volunteers (ages 19-39) were transferred from a hospital bed to a wheelchair using (a) a gait belt and (b) a sit-to-stand lift. With legs secured in the lift, participants were lifted to five different heights (knee angles 120-180 degrees) while holding and not holding the lift handles. Participants supported a greater percentage of body weight as they were lifted higher, increasing from 60% to almost 100% (p < .01). Holding the handles did not have an effect on weight borne overall. At low heights, slightly less weight was borne when not using the handles than with them, and no difference in weight borne was found at heights near standing (p < .01). All participants felt more comfortable and safer transferring from bed to wheelchair with the mechanical lift than with the gait belt (p < .01). Results are limited to normal-weight patients but suggest that sit-stand lifts can be used in patients without upper extremity strength. Patients with limited weight-bearing capacity can be transferred by not raising them high in the lift. © 2016 Wiley Periodicals, Inc.

Impact of Work Organizational Factors on Carpal Tunnel Syndrome and Epicondylitis.

OBJECTIVE: The aim of this study was to identify relationships between work organizational variables (job rotation, overtime work, having a second job, and work pacing) (These work organizational variables and their relationships with biomechanical and psychosocial exposures were studied previously and published in a separate paper.) and health outcome measures [carpal tunnel syndrome (CTS), lateral and medial epicondylitis (LEPI/MEPI)]. METHODS: Using a pooled baseline cohort of 1834 subjects, the relationships were studied using logistic regression models. RESULTS: Varied degrees of associations between the work organizational and outcomes variables were found. Job rotation was significantly associated with being a CTS case [odds ratio (OR) = 1.23, 95% confidence interval (95% CI): 1.00 to 1.50]. Overtime work was significantly associated with lower LEPI prevalence (OR = 0.48, 95% CI: 0.28 to 0.84). No statistically significant associations were found between having a second job and different work pacing and any of the three health outcome measures. CONCLUSIONS: Work organizational variables were only partially associated with the studied health outcomes.

Psychosocial Factors Related to Lateral and Medial Epicondylitis: Results From Pooled Study Analyses.

OBJECTIVE: The goal is to assess the relationships between psychosocial factors and both medial and lateral epicondylitis after adjustment for personal and job physical exposures. METHODS: One thousand eight hundred twenty-four participants were included in pooled analyses. Ten psychosocial factors were assessed. RESULTS: One hundred twenty-one (6.6%) and 34 (1.9%) participants have lateral and medial epicondylitis, respectively. Nine psychosocial factors assessed had significant trends or associations with lateral epicondylitis, the largest of which was between physical exhaustion after work and lateral epicondylitis with and odds ratio of 7.04 (95% confidence interval = 2.02 to 24.51). Eight psychosocial factors had significant trends or relationships with medial epicondylitis, with the largest being between mental exhaustion after work with an odds ratio of 6.51 (95% confidence interval = 1.57 to 27.04). CONCLUSIONS: The breadth and strength of these associations after adjustment for confounding factors demonstrate meaningful relationships that need to be further investigated in prospective analyses.

Morphometry of the lower lumbar intervertebral discs and endplates: comparative analyses of new MRI data with previous findings.

PURPOSE: Variability of the human lower lumbar geometry is related to complications of disc arthroplasty surgery. Accurate morphometric descriptions are essential for the design of artificial intervertebral discs to ensure good prothesis-vertebra contact and better load distribution, and can improve spinal biomechanics. Unfortunately, current knowledge of the lower lumbar geometry is limited either in the representativeness of sample populations or the accuracy and comprehensiveness of measurements. The objective of this study was to establish an accurate and reliable measurement protocol, provide a comprehensive database of lower lumbar geometry, and compare and summarize geometric data as reported in the literature. METHODS: T2-weighted magnetic resonance imaging (MRI) scans of lower lumbar spine (L3-S1), taken from 109 adult subjects, were anonymized from the digital archive of a local hospital. A total of 318 intervertebral discs and 590 endplates met the inclusion criteria and were studied. Linear and planar measurements were performed using OsiriX software, and analyzed using split plot factorial (SPF) analysis of variance (ANOVA), independent student t tests, paired sample t tests, and Tukey's honest significant difference (HSD) post hoc tests. RESULTS: Excellent intra- and inter-observer reliabilities were achieved using the proposed measurement protocol. The results of this study indicated that male subjects had significantly larger geometric dimensions. L5/S1 discs had the smallest geometric dimensions compared to the discs at other two levels. Significant craniocaudal differences were found in endplate morpohometry. The error associated with using ellipsoid methods was quantified at each lower lumbar level. A large comprehensive database compiling lower lumbar geometry from many studies was established. This study provides geometric data for the female subjects at the L5/S1 level, previously lacking in the literature. CONCLUSION: This study demonstrates the potential of using MRI data to establish a standard measurement protocol for morphometric quantification of the lower lumbar intervertebral discs and vertebral endplates. These results are invaluable in characterizing comprehensive lower lumbar morphometry, which may provide crucial information for planning spinal surgeries, designing artificial intervertebral discs, and for biomechanical modeling of the low lack.

Prediction models for the erector spinae muscle cross-sectional area.

Accurate and reliable "individualized" low back erector spinae muscle (ESM) data are of importance to estimate its force producing capacity. Knowing the force producing capacity, along with spinal loading, enhances the understanding of low back injury mechanisms. The objective of this study was to build regression models to estimate the ESM cross-sectional area (CSA). Measurements were taken from axial-oblique magnetic resonance imaging (MRI) scans of a large historical population [54 females and 53 males at L3/L4, 50 females and 44 males at L4/L5, and 41 females and 35 males at L5/S1 levels]. Results suggest that an individual's ESM CSA can be accurately estimated based on his/her gender, height, and weight. Results further show that there is no significant difference between the measured and estimated ESM CSAs, and expected absolute error is less than 15%.