Microbial contamination of spittoons and germicidal effect of irradiation with krypton chloride excimer lamps (Far UV-C 222 nm).

BACKGROUND: In dentistry, instruments, appliances, and body fluids such as saliva or blood are possible sources of infection. Although conventional antiseptic procedures effectively prevent infection, spittoons cannot be sanitized between each treated patient and are usually washed only with running water. However, there is currently no fast and efficient disinfection method that can be implemented between treatments. An optically filtered krypton chloride excimer lamp using ultraviolet light (Far UV-C) in the 200-230 nm wavelength range (innocuous to humans) has been recently used as a virus- and bacteria-inactivating technology. This study aimed to identify the bioburden of a dental spittoon and examine the susceptibility of two oral Streptococcus and two Enterococci to 222-nm Far UV-C by irradiating the spittoon with 222 nm Far UV-C for 5 min before evaluating the disinfection effect. METHODS: Bacterial analysis and real-time polymerase-chain reaction testing was used to confirm the spittoon's biological contamination. Bacterial susceptibility to a 222-nm Far UV-C was determined with a graded dose irradiation test. After each treatment, the spittoon was irradiated with 222-nm Far UV-C for 5 min, and the disinfecting effect was evaluated. Microbial analysis of the spittoon's surface was performed using the Silva database. RESULTS: We found that > 97% of the microbes consisted of six bacterial phyla, whereas no viruses were found. Pseudomonas aeruginosa was frequently detected. The 1-log reduction value of two oral-derived Streptococci and two Enterococci species at 222-nm Far UV-C was 4.5-7.3 mJ/cm2. Exposure of the spittoon to 222-nm Far UV-C at 3.6-13.5 mJ/cm2 significantly decreased bacterial counts (p < 0.001). CONCLUSIONS: Irradiation with 222-nm Far UV-C at 3.6-13.5 mJ/cm2 significantly eliminates bacteria in spittoons, even when they are only rinsed with water. Hence, 222-nm Far UV-C irradiation may inhibit the risk of bacterial transmission from droplets in sink surfaces.

Mechanism of dentin hardness measurements using a dentin hardness measuring device with a light-emitting diode.

Significance: Managing caries is imperative in a rapidly aging society. Current diagnoses use qualitative indices. However, a quantitative evaluation of hardness in a clinical setting may lead to more accurate diagnoses. Previously, hardness meter using indenter with light for tooth monitoring (HAMILTOM) was developed to quantitatively measure tooth hardness. Herein, the physical interpretation of dentin hardness measured using HAMILTOM and the dentin hardness measurement mechanism are discussed. Aim: This study evaluates the mechanism of dentin hardness measurements using HAMILTOM physically and compare the invasiveness to dentin by HAMILTOM with those using a dental probe for palpation. Approach: Eleven bovine dentin samples were used to create caries models. HAMILTOM measured the dark areas, and its indentations were observed using scanning electron microscopy. Also, its invasiveness was evaluated by comparing the results with those from dental probe palpation. Results: The indentation areas were smaller than the dark areas in HAMILTOM, which may be due to exuded water from the dentin sample and the elastic recovery of dentin sample. Additionally, the dental probe indentation was deeper than the HAMILTOM indentations. Conclusions: The results demonstrate that the indentation areas were smaller than the dark areas measured by HAMILTOM, which might contain the influence of exuded water and the deformation of dentin sample. Also, HAMILTOM is less invasive than dental probe palpation. In the future, HAMILTOM may become a standard hardness measuring method to diagnose root caries.

Localization of senescent cells under cavity preparations in rats and restoration of reparative dentin formation by senolytics.

Reparative dentin formed by dental cavity preparation (DCP) is frequently used in clinical operations and plays a pivotal role in pulp protection. Recent reports have shown that senescent cells induced by various stressors aggravate many diseases. They can be treated using senolytics, which are drugs that selectively eliminate senescent cells. However, the association between DCP, senescent cells, and senolytics remains unclear. In this study, we established a rat model of DCP and analyzed the spatiotemporal localization of senescent cells in the pulp. The results showed that p21- and p16-positive senescent cells appeared mostly around the pulp horn (PH) under DCP. Furthermore, administration of senolytics (dasatinib and quercetin) successfully eliminated these senescent cells, thereby restoring the volume of reparative dentin formation. These data indicate that senescent cells induced by DCP may hamper the formation of reparative dentin. Senescent cells may be targets for the development of new restorative dentistry therapies.

Effects of a co-stimulation with S-PRG filler eluate and muramyl dipeptide (MDP) on matrix metalloproteinase-1 production by human dental pulp fibroblast-like cells.

The present study investigated the effects of a co-stimulation with surface reaction-type pre-reacted glass-ionomer (S-PRG) filler eluate and muramyl dipeptide (MDP) on matrix metalloproteinase (MMP)-1 production by human dental pulp fibroblast-like cells (hDPFs). S-PRG filler eluate contains 6 ions (F, Na, Al, B, Sr, and Si) released from S-PRG filler. Each S-PRG filler eluate and MDP stimulation enhanced MMP-1 production by hDPFs. The co-stimulation with S-PRG filler eluate and MDP enhanced MMP-1 production more than the MDP stimulation alone. A similar stimulation induced the phosphorylation of ERK 1/2. The increased secretion of MMP-1 and enhanced phosphorylation of ERK 1/2 by the co-stimulation with S-PRG filler eluate and MDP were suppressed by the selective and potent CaSR antagonist NPS 2143. Since strontium binds to CaSR, these results suggest that the enhanced production of MMP-1 by the co-stimulation with S-PRG filler eluate and MDP was due to the effects of strontium.

Demonstration of an optical dentin hardness measuring device using bovine dentin with different demineralization times.

Significance: The increase in root caries is a serious problem as society ages. Root caries is diagnosed by inspection and palpation, which are qualitative. A method to objectively and quantitatively evaluate the progress of root caries in a clinical setting is strongly desired. The root caries could be diagnosed by measuring hardness because dentin becomes softer as the caries progresses. Vickers hardness has been customarily used as an indicator of tooth hardness. However, this method cannot be used to in vivo teeth because the teeth must be dried prior to measurement to make the indentation. A hardness meter using an indenter with light for tooth monitoring (HAMILTOM) is proposed as an optical device. HAMILTOM could measure hardness of teeth in wet condition as a dark area while applying a load to dentins without drying. Therefore, HAMILTOM may realize hardness measurements of in vivo teeth in a clinical setting quantitatively. Aim: The aim of our study is to demonstrate the optical dentin hardness measuring device HAMILTOM using bovine dentin with different demineralization times and to evaluate the correlation between the dark areas measured by HAMILTOM and the Vickers hardness measured by the Vickers hardness tester. Approach: The samples were 20 bovine dentins. They were demineralized by a lactic acid solution with different times and divided into groups 1 and 2 of 10 samples each. In both groups, the dark areas and Vickers hardness were measured for each sample. Group 1 was used to obtain a calibration curve to calculate Vickers hardness from the dark area. Group 2 was used to validate the calibration curve obtained from the dentin samples of group 1. Results: The areas appearing black without a total internal reflection of the indenter measured by HAMILTOM increased as the demineralization time increased. Additionally, the Vickers hardness of group 2 calculated by the dark areas of group 2 and the calibration curve obtained in group 1 and the Vickers hardness of group 2 measured by the Vickers hardness tester were strongly correlated with a determination coefficient of 0.99. Conclusions: The results demonstrate that HAMILTOM may be a suitable alternative to the conventional method. Unlike the conventional method, which cannot be used for in vivo teeth, HAMILTOM holds potential to quantitatively evaluate the progress of caries in in vivo teeth.

Interdental Plaque Microbial Community Changes under In Vitro Violet LED Irradiation.

Oral microbiome dysbiosis has important links to human health and disease. Although photodynamic therapy influences microbiome diversity, the specific effect of violet light irradiation remains largely unknown. In this study, we analyzed the effect of violet light-emitting diode (LED) irradiation on interdental plaque microbiota. Interdental plaque was collected from 12 human subjects, exposed to violet LED irradiation, and cultured in a specialized growth medium. Next-generation sequencing of the 16S ribosomal RNA genes revealed that α-diversity decreased, whereas ß-diversity exhibited a continuous change with violet LED irradiation doses. In addition, we identified several operational taxonomic units that exhibited significant shifts during violet LED irradiation. Specifically, violet LED irradiation led to a significant reduction in the relative abundance of Fusobacterium species, but a significant increase in several species of oral bacteria, such as Veillonella and Campylobacter. Our study provides an overview of oral plaque microbiota changes under violet LED irradiation, and highlights the potential of this method for adjusting the balance of the oral microbiome without inducing antibiotic resistance.