Evaluating foliar insecticides and economic thresholds for Tychius picirostris (Coleoptera: Curculionidae) management in Oregon white clover seed production.

The clover seed weevil, Tychius picirostris Fabricius (Coleoptera: Curculionidae), is a major pest in Oregon white clover seed crops. Reliance on synthetic pyrethroid insecticides and limited availability of diverse modes of action (MoAs) has increased insecticide resistance selection in regional T. picirostris populations, emphasizing the need to evaluate novel chemistries and rotational strategies for effective insecticide resistance management (IRM). The efficacy of 8 foliar insecticide formulations for managing T. picirostris adult and larval life stages was determined in small and large-plot field trials across 2 crop years. In both years, bifenthrin (Brigade 2EC), the grower's standard, showed negligible adult and larval suppression. Insecticide formulations with isocycloseram and cyantraniliprole active ingredients reduced adult and larval populations when applied at BBCH 59-60 (prebloom) and BBCH 65-66 (full bloom) growth stages, respectively. While differences in T. picirostris abundance were observed among insecticide treatments, seed yield differences were not detected in large-plot trials. Larval abundance was correlated with reduced seed yield, and an economic threshold of ≥3 larvae per 30 inflorescences was determined as a conservative larval threshold to justify foliar applications of diamide insecticides. Additional commercial white clover seed fields were surveyed to compare larval scouting techniques, including a standard Berlese funnel and a grower's do-it-yourself funnel. Both larval extraction techniques were correlated and provided similar estimates of larval abundance. These findings demonstrate new MoAs, optimal insecticide application timing, and larval monitoring methods that can be incorporated into an effective T. picirostris IRM program in white clover seed crops.

YDV Resistance in Barley: Phenotyping, Remote Imagery, and Virus-Vector Characterization.

Yellow Dwarf Viruses (YDV) spread by aphids are some of the most economically important barley (Hordeum vulgare L.) virus-vector complexes worldwide. Detection and control of these viruses are critical components in the production of barley, wheat, and numerous other grasses of agricultural importance. Genetic control of plant diseases is often preferable to chemical control to reduce the epidemiological, environmental, and economic cost of foliar insecticides. Accordingly, the objectives of this work were to I) screen a barley population for resistance to YDV under natural infection using phenotypic assessment of disease symptoms, II) implement drone imagery to further assess resistance and test its utility as a disease screening tool, III) identify the prevailing virus and vector types in the experimental environment, and IV) perform a genome-wide association study to identify genomic regions associated with measured traits. Significant genetic differences were found in a population of 192 barley inbred lines regarding their YDV symptom severity and symptoms were moderately to highly correlated with grain yield. The severity of YDV measured with aerial imaging was highly correlated with on-the-ground estimates (r=0.65). Three aphid species vectoring three YDV species were identified with no apparent genotypic influence on their distribution. A QTL impacting YDV resistance was detected on chromosome 2H, albeit undetected using aerial imaging. However, QTL for canopy cover and mean NDVI were successfully mapped using the drone. This work provides a framework for utilizing drone imagery in future resistance breeding efforts for YDV in cereals and grasses, and in other virus-vector disease complexes.

Field-evolved pyrethroid resistance in Tychius picirostris (Coleoptera: Curculionidae) populations in Oregon white clover seed crops.

The clover seed weevil, Tychius picirostris Fabricius, a serious pest of white clover, Trifolium repens L., grown for seed in western Oregon, causing feeding damage to flowers and developing seeds. Since 2017, white clover seed producers have anecdotally reported T. picirostris control failures using foliar pyrethroid insecticide applications. This mode of action (MoA) is an important chemical control option for T. picirostris management. To evaluate insecticide resistance selection to pyrethroids (bifenthrin) and other MoAs labeled for T. picirostris management (malathion and chlorantraniliprole), adult populations were collected from 8 commercial white clover grown for seed fields in the Willamette Valley, OR, in 2022 and 2023. Among collected Oregon populations, very high resistance ratios (RR50 = 178.00-725.67) were observed to technical grade bifenthrin and low to high resistance ratios (RR50 = 7.80-32.80) to malathion in surface contact assays compared to a susceptible Canadian field population. Moreover, >2.73 times the labeled rate of formulated product containing bifenthrin as the sole MoA was required to kill >50% of T. picirostris in topical assays. Synergistic assays with a mixed-function oxidase inhibitor, an esterase inhibitor, and a glutathione-S-transferase inhibitor revealed phase I and II detoxification enzymes are present in Oregon T. picirostris populations and confer metabolic resistance to bifenthrin. This is the first report of T. picirostris insecticide resistance selection to pyrethroid and organophosphate insecticides. Results will inform continued monitoring and insecticide resistance management strategies to slow the evolution of T. picirostris insecticide resistance selection in Oregon's white clover seed production.

Functional trait plasticity diverges between sexes in African cichlids: A contribution toward ecological sexual dimorphism?

Phenotypic plasticity enables development to produce multiple phenotypes in response to environmental conditions. Plasticity driven variation has been suggested to play a key role in adaptive divergence, and plasticity itself can evolve. However, the interaction of plasticity with the multiple levels involved with adaptive divergence is less understood. For example, sexual dimorphism can contribute adaptive variation through ecological sexual dimorphism (ESD), but the contribution of plasticity to this phenomenon is unknown. Therefore, to determine the potential contribution of plasticity to ESD, we used the adaptive radiation of Malawi cichlids. Two mouthbrooding species (Labeotropheus fuelleborni and Tropheops "Red Cheek") with differences in foraging tactics underwent foraging experiments using benthic and limnetic treatments while accounting for sex. Plasticity in craniofacial shape and three functionally important traits were measured. Plasticity was shown, but without any sex-based differences in shape. However, for mechanical advantage traits of the mandible sex by diet interactions were found. This suggests that ESD, may be influenced by phenotypic plasticity that diverges between sexes. Given the involvement of the mandible in parental care in cichlids this may indicate that sexual divergence in plasticity may trade-off against maternal care tactics.

Time course changes to structural, mechanical and material properties of bone in rats after complete spinal cord injury.

OBJECTIVE: Characterise the spatiotemporal trabecular and cortical bone responses to complete spinal cord injury (SCI) in young rats. METHODS: 8-week-old male Wistar rats received T9-transection SCI and were euthanised 2-, 6-, 10- or 16-weeks post-surgery. Outcome measures were assessed using micro-computed tomography, mechanical testing, serum markers and Fourier-transform infrared spectroscopy. RESULTS: The trabecular and cortical bone responses to SCI are site-specific. Metaphyseal trabecular BV/TV was 59% lower, characterised by fewer and thinner trabeculae at 2-weeks post-SCI, while epiphyseal BV/TV was 23% lower with maintained connectivity. At later-time points, metaphyseal BV/TV remained unchanged, while epiphyseal BV/TV increased. The total area of metaphyseal and mid-diaphyseal cortical bone were lower from 2-weeks and between 6- and 10-weeks post-SCI, respectively. This suggested that SCI-induced bone changes observed in the rat model were not solely attributable to bone loss, but also to suppressed bone growth. No tissue mineral density differences were observed at any time-point, suggesting that decreased whole-bone mechanical properties were primarily the result of changes to the spatial distribution of bone. CONCLUSION: Young SCI rat trabecular bone changes resemble those observed clinically in adult and paediatric SCI, while cortical bone changes resemble paediatric SCI only.

Methods of producing three dimensional electrospun scaffolds for bone tissue engineering: A review.

Bone is a dynamic, living tissue that exists and renews itself continuously in a 3D manner. Nevertheless, complex clinical conditions require a bone substitute to replace the defective bone and/or accelerate bone healing. Bone tissue engineering aims to treat bone defects that fail to heal on their own. Electrospinning provides an opportunity to create nano- to micro-fibrous scaffolds that mimic the architecture of the natural extracellular matrix (ECM) with high porosity and large specific surface area. Despite these advantages, traditional electrospun meshes can only provide a 2D architecture for cell attachment and proliferation rather than the 3D attachment in native tissue. Fabrication of 3D electrospun scaffolds for bone tissue regeneration is a challenging task, which has attracted significant attention over the past couple of decades. This review highlights recent strategies used to produce 3D electrospun/co-electrospun scaffolds for bone tissue applications describing the materials and procedures. It also considers combining conventional and coaxial electrospinning with other scaffold manufacturing techniques to produce 3D structures which have the potential to engineer missing bone in the human body.Graphical abstract[Formula: see text].

Testing meshes in a computer model of a laparoscopic ventral hernia repair.

BACKGROUND: The ideal mesh for hernia repair has yet to be found, in addition our knowledge of the biomechanics of the abdominal wall is poor. The aim of this study was to develop a computer model of a laparoscopic ventral hernia repair and to test different meshes in that model at various intra-abdominal pressures. METHODS: Four meshes were tested in a computer model of a ventral hernia. Mechanical failure testing of each mesh was performed in both the longitudinal and transverse directions. A CT scan of a patient with a 5 cm umbilical hernia was used to generate a 3 dimensional model. Meshes were then applied to the model in an intraperitoneal onlay position with a 5 cm overlap. The model was then tested with intraabdominal pressures for standing, coughing and jumping with and without meshes. RESULTS: Meshes varied significantly (p < 0.001) in both rupture force 14.8 (5.6) to 78 (5) n/cm and force in which they changed from elastic to plastic 1.6 (0.1) to 14.2 (0.2) n/cm. When applied to the computer model all significantly reduced the strain on the abdominal wall from 17.5% without mesh to less than 1% with mesh. All meshes prevented the hernia from bulging in the model. CONCLUSIONS: We have developed a computer model of laparoscopic ventral hernia repair based on engineering principles. This model demonstrated that meshes tested significantly reduced the strain on the abdominal wall. Further studies are required to refine this model in order to best simulate the biomechanics of the abdominal wall.

Body size impacts critical thermal maximum measurements in lizards.

Understanding the mechanisms behind critical thermal maxima (CTmax; the high body temperature at which neuromuscular coordination is lost) of organisms is central to understanding ectotherm thermal tolerance. Body size is an often overlooked variable that may affect interpretation of CTmax, and consequently, how CTmax is used to evaluate mechanistic hypotheses of thermal tolerance. We tested the hypothesis that body size affects CTmax and its interpretation in two experimental contexts. First, in four Sceloporus species, we examined how inter- and intraspecific variation in body size affected CTmax at normoxic and experimentally induced hypoxic conditions, and cloacal heating rate under normoxic conditions. Negative relationships between body size and CTmax were exaggerated in larger species, and hypoxia-related reductions in CTmax were unaffected by body size. Smaller individuals had faster cloacal heating rates and higher CTmax, and variation in cloacal heating rate affected CTmax in the largest species. Second, we examined how body size interacted with the location of body temperature measurements (i.e., cloaca vs. brain) in Sceloporus occidentalis, then compared this in living and deceased lizards. Brain temperatures were consistently lower than cloacal temperatures. Smaller lizards had larger brain-cloacal temperature differences than larger lizards, due to a slower cloacal heating rate in large lizards. Both live and dead lizards had lower brain than cloacal temperatures, suggesting living lizards do not actively maintain lower brain temperatures when they cannot pant. Thermal inertia influences CTmax data in complex ways, and body size should therefore be considered in studies involving CTmax data on species with variable sizes.

Nanovibrational Stimulation of Mesenchymal Stem Cells Induces Therapeutic Reactive Oxygen Species and Inflammation for Three-Dimensional Bone Tissue Engineering.

There is a pressing clinical need to develop cell-based bone therapies due to a lack of viable, autologous bone grafts and a growing demand for bone grafts in musculoskeletal surgery. Such therapies can be tissue engineered and cellular, such as osteoblasts, combined with a material scaffold. Because mesenchymal stem cells (MSCs) are both available and fast growing compared to mature osteoblasts, therapies that utilize these progenitor cells are particularly promising. We have developed a nanovibrational bioreactor that can convert MSCs into bone-forming osteoblasts in two- and three-dimensional, but the mechanisms involved in this osteoinduction process remain unclear. Here, to elucidate this mechanism, we use increasing vibrational amplitude, from 30 nm (N30) to 90 nm (N90) amplitudes at 1000 Hz and assess MSC metabolite, gene, and protein changes. These approaches reveal that dose-dependent changes occur in MSCs' responses to increased vibrational amplitude, particularly in adhesion and mechanosensitive ion channel expression and that energetic metabolic pathways are activated, leading to low-level reactive oxygen species (ROS) production and to low-level inflammation as well as to ROS- and inflammation-balancing pathways. These events are analogous to those that occur in the natural bone-healing processes. We have also developed a tissue engineered MSC-laden scaffold designed using cells' mechanical memory, driven by the stronger N90 stimulation. These mechanistic insights and cell-scaffold design are underpinned by a process that is free of inductive chemicals.

Optimising micro-hydroxyapatite reinforced poly(lactide acid) electrospun scaffolds for bone tissue engineering.

HA-mineralised composite electrospun scaffolds have been introduced for bone regeneration due to their ability to mimic both morphological features and chemical composition of natural bone ECM. Micro-sized HA is generally avoided in electrospinning due to its reduced bioactivity compared to nano-sized HA due to the lower surface area. However, the high surface area of nanoparticles provides a very high surface energy, leading to agglomeration. Thus, the probability of nanoparticles clumping leading to premature mechanical failure is higher than for microparticles at higher filler content. In this study, two micron-sized hydroxyapatites were investigated for electrospinning with PLA at various contents, namely spray dried HA (HA1) and sintered HA (HA2) particles to examine the effect of polymer concentration, filler type and filler concentration on the morphology of the scaffolds, in addition to the mechanical properties and bioactivity. SEM results showed that fibre diameter and surface roughness of 15 and 20 wt% PLA fibres were significantly affected by incorporation of either HA. The apatite precipitation rates for HA1 and HA2-filled scaffolds immersed in simulated body fluid (SBF) were similar, however, it was affected by the fibre diameter and the presence of HA particles on the fibre surface. Degradation rates of HA2-filled scaffolds in vitro over 14 days was lower than for HA1-filled scaffolds due to enhanced dispersion of HA2 within PLA matrix and reduced cavities in PLA/HA2 interface. Finally, increasing filler surface area led to enhanced thermal stability as it reduced thermal degradation of the polymer.

Topical Application of Wogonin Provides a Novel Treatment of Knee Osteoarthritis.

Osteoarthritis (OA) is a degenerative joint disease characterized by inflammatory degradation of articular cartilage and subchondral bone. Wogonin, a compound extracted from the plant Scutellaria baicalensis (colloquially known as skullcap), has previously been shown to have direct anti-inflammatory and antioxidative properties. We examined the pain-reducing, anti-inflammatory, and chondroprotective effects of wogonin when applied as a topical cream. We validated the efficacy of delivering wogonin transdermally in a cream using pig ear skin in a Franz diffusion system. Using a surgical mouse model, we examined the severity and progression of OA with and without the topical application of wogonin. Using a running wheel to track activity, we found that mice with wogonin treatment were statistically more active than mice receiving vehicle treatment. OA progression was analyzed using modified Mankin and OARSI scoring and direct quantification of cyst-like lesions at the chondro-osseus junction; in each instance we observed a statistically significant attenuation of OA severity among mice treated with wogonin compared to the vehicle treatment. Immunohistochemistry revealed a significant decrease in protein expression of transforming growth factor ß1 (TGF-ß1), high temperature receptor A1 (HTRA1), matrix metalloprotease 13 (MMP-13) and NF-κB in wogonin-treated mice, further bolstering the cartilage morphology assessments in the form of a decrease in inflammatory and OA biomarkers.

Bone mineral as a drug-seeking moiety and a waste dump.

Bone is a dynamic tissue with a quarter of the trabecular and a fifth of the cortical bone being replaced continuously each year in a complex process that continues throughout an individual's lifetime. Bone has an important role in homeostasis of minerals with non-stoichiometric hydroxyapatite bone mineral forming the inorganic phase of bone. Due to its crystal structure and chemistry, hydroxyapatite (HA) and related apatites have a remarkable ability to bind molecules. This review article describes the accretion of trace elements in bone mineral giving a historical perspective. Implanted HA particles of synthetic origin have proved to be an efficient recruiting moiety for systemically circulating drugs which can locally biomodulate the material and lead to a therapeutic effect. Bone mineral and apatite however also act as a waste dump for trace elements and drugs, which significantly affects the environment and human health. Cite this article: Bone Joint Res 2020;9(10):709-718.

Global and site-specific analysis of bone in a rat model of spinal cord injury-induced osteoporosis.

Micro-Computed Tomography bone analysis is the gold standard method for assessing trabecular and cortical bone microarchitecture in small animal bones. This technique reports morphometric parameters as averages over selected volumes of interest (VOIs). This study proposes the introduction of an additional global 2D morphometric step into the analysis process, that provides a survey of the underlying morphometric variation present throughout both trabecular and cortical bone. The visualisation of these morphometric distributions provides a systematic approach to VOI selection that provides rationale and adds confidence to subsequent 3D morphometric analysis. To test the applicability and value of this methodological addition it was applied to the distal femur of a rat model of spinal cord injury (SCI)-induced osteoporosis. The 2D morphometric variation of both trabecular and cortical bone was quantified as a function of bone length. SCI-induced osteoporosis was localised in i) trabecular bone, where metaphyseal bone was more severely affected than epiphyseal bone, and there was a significant reduction in Distal Femoral Trabecular Extent, a new parameter defined here that quantifies how far trabecular bone penetrates in to the marrow cavity, ii) cortical bone, where diaphyseal bone underwent significant lowering of both cortical area and thickness, while distal-metaphyseal bone did not. Theses site-specific changes were validated, further elucidated and compared with follow-up conventional 3D analysis. The techniques applied here are equally applicable to other long bones (tibia, humerus, radius, ulna), other types of imaging modality and other types of experimental design including the effects of rehabilitation, aging, loading, gene knockout and pharmacological intervention.

Rationale and design of a pilot study to evaluate the acceptability and effectiveness of a revised protein sparing modified fast (rPSMF) for severe obesity in a pediatric tertiary care weight management clinic.

Aggressive dietary interventions may provide an accessible treatment option for children and adolescents with severe obesity who are not successful with traditional lifestyle behavioral interventions or do not want or qualify for weight loss surgery. One such intensive dietary option is the protein sparing modified fast (PSMF). The PSMF involves minimal carbohydrate intake to induce ketosis, while maintaining adequate or high protein intake to minimize catabolism. The PSMF, under medical supervision, can be an effective and safe intervention for children and adolescents, yet the PSMF diet is not regularly used in the treatment of pediatric severe obesity. This paper describes the rationale and design for a pilot study to evaluate the acceptability and effectiveness of a revised PSMF (rPSMF) implemented as a weight loss treatment option for children and adolescents with severe obesity in a pediatric tertiary care weight management clinic. The primary aim of the study is to evaluate the acceptability of the rPSMF as assessed by adherence, satisfaction with the intervention, and participation rate using quantitative and qualitative methods. The secondary aim is to investigate the effectiveness of the rPSMF on improving a) anthropometric measures (weight, body mass index [BMI], BMI z-score); b) metabolic measures (lipid profile, glycosylated hemoglobin, liver function tests); and c) quality of life. Results of this study will provide guidance for the standardization of a pediatric rPSMF protocol in a clinic setting, delineate which factors improve or hinder adherence and weight loss and provide preliminary data for a multicenter randomized controlled trial. CLINICALTRIALSGOV IDENTIFIER: NCT03899311.

Patterns of Care in Pediatric Craniopharyngioma: Outcomes Following Definitive Radiotherapy.

BACKGROUND/AIM: Few data are available on the utility of definitive radiation therapy (RT) for pediatric craniopharyngioma. This study sought to evaluate practice patterns and patient outcomes using the Surveillance Epidemiology and End Results database from 2004-2014. MATERIALS AND METHODS: Overall survival (OS) was compared between five treatment groups, definitive radiation therapy (RT), gross total resection (GTR), subtotal resection (STR), STR+RT, and observation/biopsy only, using Kaplan-Meier analysis and log-rank tests. Multivariate Cox proportional hazards modeling determined variables independently associated with OS. RESULTS: A total of 373 patients met the study criteria. GTR and definitive RT conferred superior OS than observation/biopsy (p=0.008 and 0.029), but were equivalent to STR+RT (p=0.350 and 0.200). GTR was associated with a higher OS than STR (p=0.027). On multivariate analysis, STR+RT, GTR, and definitive RT were associated with statistically equivalent OS (p=0.990). CONCLUSION: Definitive RT for pediatric craniopharyngioma affords similar outcomes to established modalities of therapy such as GTR and STR+RT.

Hybrid core-shell scaffolds for bone tissue engineering.

The tissue engineering applications of coaxial electrospinning are growing due to the potential increased functionality of the fibres compared to basic electrospinning. Previous studies of core and shell scaffolds have placed the active elements in the core, however, the surface response to a biomaterial affects the subsequent behaviour, thus here hydroxyapatite (HA) was added to the shell. Coaxial electrospun polycaprolactone (PCL)-polylactic acid (PLA)/HA (core-shell) scaffolds were produced in 2D sheets using a plate collector, or 3D tubes for bone tissue engineering using a rotating needle collector. The scaffolds include high hydroxyapatite content while retaining their structural and mechanical integrity. The effect of the collector type on fibre diameter, fibre alignment and mechanical properties have been evaluated, and the impact of HA incorporation on bioactivity, BMP-2 release, cell behaviour and mechanical properties for up to 12 weeks degradation were assessed. Fibre uniformity in coaxial electrospinning depends on the relative flow rate of the core and shell solutions. Using a rotating needle collector increased fibre alignment compared to a stationary collector, without affecting fibre diameter significantly, while HA content increased fibre non-uniformity. Coaxial PCL-PLA/HA fibres exhibited significantly higher bioactivity compared to PCL-PLA scaffolds due to the surface exposure of the HA particles. Apatite formation increased with increasing SBF immersion time. Coaxial tubular scaffolds with and without HA incorporation showed gradual reductions in their mechanical properties over 12 weeks in PBS or SBF but still retained their structural integrity. Coaxial scaffolds with and without HA exhibited gradual and sustained BMP-2 release and supported MSCs proliferation and differentiation with no significant difference between the two scaffolds types. These materials therefore show potential applications as bone tissue engineering scaffolds.

Ultrasound-guided adductor canal block: a cadaver study investigating the effect of a thigh tourniquet.

BACKGROUND: Placement of local anaesthetic within the adductor canal using ultrasonography is an alternative to femoral nerve blocks for postoperative pain relief after knee joint replacement surgery. However, the effect of an inflated thigh tourniquet on the distribution of local anaesthetic within the adductor canal is unknown. The aim of this cadaveric study was to compare the distribution of radio-opaque dye within the adductor canal in the presence or absence of an inflated thigh tourniquet. METHODS: Bilateral ultrasound-guided adductor canal blocks were performed on the thawed lower limbs of five fresh frozen human cadavers. The left and right lower cadaver limbs were randomised to receive or not receive a thigh tourniquet inflated to 300 mm Hg for 1 h. X-rays with iohexol radio-opaque dye were obtained in four views, and fiducial markers inserted as reference points. Virtual editing technology was used to recreate outlines representing the distribution of the radio-opaque dye and superimpose these on anatomical images. RESULTS: Radio-opaque dye was distributed on the medial aspect of the thighs with entire and well circumscribed margins. The majority of the radio-opaque dye was confined within the adductor canal. Superior-inferior dye distribution was 315 mm [95% confidence intervals (CI) 289-342] and 264 mm (95% CI 239-289) in the presence and absence of an inflated thigh tourniquet, respectively (diff 95% CI -80.46 to -22.22, P=0.0081). Image analysis using the recreated radio-opaque outlines suggested that the most proximal point of the radio-opaque dye was 100 mm (95% CI 82-117) or 117 mm (95% CI 62-171) below the inguinal ligament in the presence and absence of an inflated thigh tourniquet, respectively (diff 95% CI -38 to 72, P=0.456). CONCLUSIONS: Application and inflation of thigh tourniquets significantly increased the combined superior-inferior dye distribution within the adductor canal of cadaveric limbs. There was insufficient evidence to suggest significant proximal spread of 25 ml of local anaesthetic to involve the motor branches of the femoral nerve. In some patients, the local anaesthetic may reach the popliteal fossa in close approximation to the sciatic nerve.

Methylmercury Dynamics in Upper Sacramento Valley Rice Fields with Low Background Soil Mercury Levels.

Few studies have considered how methylmercury (MeHg, a toxic form of Hg produced in anaerobic soils) production in rice ( L.) fields can affect water quality, and little is known about MeHg dynamics in rice fields. Surface water MeHg and total Hg (THg) imports, exports, and storage were studied in two commercial rice fields in the Sacramento Valley, California, where soil THg was low (25 and 57 ng g). The median concentration of MeHg in drainage water exiting the fields was 0.17 ng g (range: <0.007-2.1 ng g). Compared with irrigation water, drainage water had similar MeHg concentrations, and lower THg concentrations during the growing season. Significantly elevated drainage water MeHg and THg concentrations were observed in the fallow season compared with the growing season. An analysis of surface water loads indicates that fields were net importers of both MeHg (76-110 ng m) and THg (1947-7224 ng m) during the growing season, and net exporters of MeHg (35-200 ng m) and THg (248-6496 ng m) during the fallow season. At harvest, 190 to 700 ng MeHg m and 1400 to 1700 ng THg m were removed from fields in rice grain. Rice straw, which contained 120 to 180 ng MeHg m and 7000-10,500 ng m THg was incorporated into the soil. These results indicate that efforts to reduce MeHg and THg exports in rice drainage water should focus on the fallow season. Substantial amounts of MeHg and THg were stored in plants, and these pools should be considered in future studies.