RESUMEN
Structural modelling of operando pair distribution function (PDF) data of complex functional materials can be highly challenging. To aid the understanding of complex operando PDF data, this article demonstrates a toolbox for PDF analysis. The tools include denoising using principal component analysis together with the structureMining, similarityMapping and nmfMapping apps available through the online service 'PDF in the cloud' (PDFitc, https://pdfitc.org/). The toolbox is used for both ex situ and operando PDF data for 3â nm TiO2-bronze nanocrystals, which function as the active electrode material in a Li-ion battery. The tools enable structural modelling of the ex situ and operando PDF data, revealing two pristine TiO2 phases (bronze and anatase) and two lithiated Li x TiO2 phases (lithiated versions of bronze and anatase), and the phase evolution during galvanostatic cycling is characterized.
RESUMEN
The synthesis of complex oxides at low temperatures brings forward aspects of chemistry not typically considered. This study focuses on perovskite LaMnO3, which is of interest for its correlated electronic behavior tied to the oxidation state and thus the spin configuration of manganese. Traditional equilibrium synthesis of these materials typically requires synthesis reaction temperatures in excess of 1000 °C, followed by subsequent annealing steps at lower temperatures and different p(O2) conditions to manipulate the oxygen content postsynthesis (e.g., LaMnO3+x). Double-ion exchange (metathesis) reactions have recently been shown to react at much lower temperatures (500-800 °C), highlighting a fundamental knowledge gap for how solids react at lower temperatures. Here, we revisit the metathesis reaction, LiMnO2 + LaOX, where X is a halide or mixture of halides, using in situ synchrotron X-ray diffraction. These experiments reveal low reaction onset temperatures (ca. 450-480 °C). The lowest reaction temperatures are achieved by a mixture of lanthanum oxyhalide precursors: 2 LiMnO2 + LaOCl + LaOBr. In all cases, the resulting products are the expected alkali halide salt and defective La1-ϵMn1-ϵO3, where ϵ = x/(3 + x). We observe a systematic variation in defect concentration, consistent with a rapid stoichiometric local equilibration of the precursors and the subsequent global thermodynamic equilibration with O2 (g), as revealed by computational thermodynamics. Together, these results reveal how the inclusion of additional elements (e.g., Li and a halide) leads to the local equilibrium, particularly at low reaction temperatures for solid-state chemistry.
RESUMEN
One can nowadays readily generate monodisperse colloidal nanocrystals, but the underlying mechanism of nucleation and growth is still a matter of intense debate. Here, we combine X-ray pair distribution function (PDF) analysis, small-angle X-ray scattering (SAXS), nuclear magnetic resonance (NMR), and transmission electron microscopy (TEM) to investigate the nucleation and growth of zirconia nanocrystals from zirconium chloride and zirconium isopropoxide at 340 °C, in the presence of surfactant (tri-n-octylphosphine oxide). Through E1 elimination, precursor conversion leads to the formation of small amorphous particles (less than 2 nm in diameter). Over the course of the reaction, the total particle concentration decreases while the concentration of nanocrystals stays constant after a sudden increase (nucleation). Kinetic modeling suggests that amorphous particles nucleate into nanocrystals through a second order process and they are also the source of nanocrystal growth. There is no evidence for a soluble monomer. The nonclassical nucleation is related to a precursor decomposition rate that is an order of magnitude higher than the observed crystallization rate. Using different zirconium precursors (e.g., ZrBr4 or Zr(OtBu)4), we can tune the precursor decomposition rate and thus control the nanocrystal size. We expect these findings to help researchers in the further development of colloidal syntheses.
RESUMEN
Owing to their high tunability and predictable structures, metal-organic materials offer a powerful platform to study glass formation and crystallization processes and to design glasses with unique properties. Here, we report a novel series of glass-forming metal-ethylenebis(acetamide) networks that undergo reversible glass and crystallization transitions below 200 °C. The glass-transition temperatures, crystallization kinetics, and glass stability of these materials are readily tunable, either by synthetic modification or by liquid-phase blending, to form binary glasses. Pair distribution function (PDF) analysis reveals extended structural correlations in both single and binary metal-bis(acetamide) glasses and highlights the important role of metal-metal correlations during structural evolution across glass-crystal transitions. Notably, the glass and crystalline phases of a Co-ethylenebis(acetamide) binary network feature a large reflectivity contrast ratio of 4.8 that results from changes in the local coordination environment around Co centers. These results provide new insights into glass-crystal transitions in metal-organic materials and have exciting implications for optical switching, rewritable data storage, and functional glass ceramics.
Asunto(s)
Cristalización , Vidrio , Vidrio/químicaRESUMEN
Recently, the U.S. Food and Drug Administration (FDA) approved the first oral antiviral drug to treat mild to moderate cases of coronavirus disease. The combination of nirmatrelvir with an already used protease inhibitor class drug, ritonavir, has led to Paxlovid®. Several studies considered drug repositioning as the first trial for new drugs. The precise identification and quantification of polymorphs in raw materials and finished products are important to researchers involved in pharmaceutical development and quality control processes. In this work, we study the solid-state behavior of the antiretroviral drugs ritonavir and lopinavir in raw materials and in milled compositions. The results indicate that mixtures of ritonavir Forms I and II are found in different batches of raw materials from the same manufacturer; besides three equal crystalline samples, an amorphous batch was found in lopinavir. Furthermore, the milling process of the already amorphous lopinavir seems to facilitate the amorphization of ritonavir as well as the production of some unexpected crystalline forms of ritonavir. A phase transition of ritonavir Form I to Form II is only observed when co-milling with amorphous lopinavir. These findings reveal significant variations in phase purity of raw materials that affect the processing and solid-state properties, representing risks for the product quality.
Asunto(s)
Infecciones por Coronavirus , Ritonavir , Humanos , Lopinavir/química , Antivirales , Infecciones por Coronavirus/tratamiento farmacológico , Combinación de MedicamentosRESUMEN
An approach is described for studying texture in nanostructured materials. The approach implements the real-space texture pair distribution function (PDF), txPDF, laid out by Gong & Billinge {(2018 â¸). arXiv:1805.10342 [cond-mat]}. It is demonstrated on a fiber-textured polycrystalline Pt thin film. The approach uses 3D PDF methods to reconstruct the orientation distribution function of the powder crystallites from a set of diffraction patterns, taken at different tilt angles of the substrate with respect to the incident beam, directly from the 3D PDF of the sample. A real-space equivalent of the reciprocal-space pole figure is defined in terms of interatomic vectors in the PDF and computed for various interatomic vectors in the Pt film. Furthermore, it is shown how a valid isotropic PDF may be obtained from a weighted average over the tilt series, including the measurement conditions for the best approximant to the isotropic PDF from a single exposure, which for the case of the fiber-textured film was in a nearly grazing incidence orientation of â¼10°. Finally, an open-source Python software package, FouriGUI, is described that may be used to help in studies of texture from 3D reciprocal-space data, and indeed for Fourier transforming and visualizing 3D PDF data in general.
RESUMEN
Glassy phases of framework materials feature unique and tunable properties that are advantageous for gas separation membranes, solid electrolytes, and phase-change memory applications. Here, we report a new guanidinium organosulfonate hydrogen-bonded organic framework (HOF) that melts and vitrifies below 100 °C. In this low-temperature regime, non-covalent interactions between guest molecules and the porous framework become a dominant contributor to the overall stability of the structure, resulting in guest-dependent melting, glass, and recrystallization transitions. Through simulations and X-ray scattering, we show that the local structures of the amorphous liquid and glass phases resemble those of the parent crystalline framework.
RESUMEN
In atomic solids, substitutional doping of atoms into the lattice of a material to form solid solutions is one of the most powerful approaches to modulating its properties and has led to the discovery of various metal alloys and semiconductors. Herein we have prepared solid solutions in hierarchical solids that are built from atomically precise clusters. Two geometrically similar metal chalcogenide clusters, Co6Se8(PEt3)6 and Cr6Te8(PEt3)6, were combined as random substitutional mixture, in three different ratios, in a crystal lattice together with fullerenes. This does not alter the underlying crystalline structure of the [cluster][C60]2 material, but it influences its electronic and magnetic properties. All three solid solutions showed increased electrical conductivities compared with either the Co- or Cr-based parent material, substantially so for two of the Co:Cr ratios (up to 100-fold), and lowered activation barriers for electron transport. We attribute this to the existence of additional energy states arising from the materials' structural heterogeneity, which effectively narrow transport gaps.
RESUMEN
Molten phases of metal-organic networks offer exciting opportunities for using coordination chemistry principles to access liquids and glasses with unique and tunable structures and properties. Here, we discuss general thermodynamic strategies to provide an increased enthalpic and entropic driving force for reversible, low-temperature melting transitions in extended coordination solids and illustrate this approach through a systematic study of a series of bis(acetamide)-based networks with record-low melting temperatures. The low melting temperatures of these compounds are the result of weak coordination bonds, conformationally flexible bridging ligands, and weak electrostatic interactions between spatially separated cations and anions, which collectively reduce the enthalpy and increase the entropy of fusion. Through a combination of crystallography, spectroscopy, and calorimetry, enthalpic trends are found to be dictated by the strength of coordination bonds and hydrogen bonds within each compound, while entropic trends are strongly influenced by the degree to which residual motion and positional disorder are restricted in the crystalline state. Extended X-ray absorption fine structure (EXAFS) and pair distribution function (PDF) analysis of Co(bba)3[CoCl4] [bba = N,N'-1,4-butylenebis(acetamide)], which features a record-low melting temperature for a three-dimensional metal-organic network of 124 °C, provide direct evidence of metal-ligand coordination in the liquid phase, as well as intermediate- and extended-range order that support its network-forming nature. In addition, rheological measurements are used to rationalize differences in glass-forming ability and relaxation dynamics. These results provide new insights into the structural and chemical factors that influence the thermodynamics of melting transitions of extended coordination solids, as well as the structure and properties of coordination network-forming liquids.
RESUMEN
In the problem of electrochemical CO2 reduction, the discovery of earth-abundant, efficient, and selective catalysts is essential to enabling technology that can contribute to a carbon-neutral energy cycle. In this study, we adapt an optical high throughput screening method to study multi-metallic catalysts for CO2 electroreduction. We demonstrate the utility of the method by constructing catalytic activity maps of different alloyed elements and use X-ray scattering analysis by the atomic pair distribution function (PDF) method to gain insight into the structures of the most active compositions. Among combinations of four elements (Au, Ag, Cu, Zn), Au6Ag2Cu2 and Au4Zn3Cu3 were identified as the most active compositions in their respective ternaries. These ternary electrocatalysts were more active than any binary combination, and a ca. 5-fold increase in current density at potentials of -0.4 to -0.8 V vs. RHE was obtained for the best ternary catalysts relative to Au prepared by the same method. Tafel plots of electrochemical data for CO2 reduction and hydrogen evolution indicate that the ternary catalysts, despite their higher surface area, are poorer catalysts for the hydrogen evolution reaction than pure Au. This results in high Faradaic efficiency for CO2 reduction to CO.
RESUMEN
Topological transitions between considerably different phases typically require harsh conditions to collectively break chemical bonds and overcome the stress caused to the original structure by altering its correlated bond environment. In this work we present a case system that can achieve rapid rearrangement of the whole lattice of a metal-organic framework through a domino alteration of the bond connectivity under mild conditions. The system transforms from a disordered metal-organic framework with low porosity to a highly porous and crystalline isomer within 40 s following activation (solvent exchange and desolvation), resulting in a substantial increase in surface area from 725 to 2,749 m2 g-1. Spectroscopic measurements show that this counter-intuitive lattice rearrangement involves a metastable intermediate that results from solvent removal on coordinatively unsaturated metal sites. This disordered-crystalline switch between two topological distinct metal-organic frameworks is shown to be reversible over four cycles through activation and reimmersion in polar solvents.
RESUMEN
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMEN
We show how the structural order of nanocrystalline zirconium phosphates (ZrP) is tuned by the synthetic methods and conditions through the use of synchrotron X-ray atomic pair distribution function analysis. With different synthetic route and different phosphoric acid concentrations in the synthesis, the product zirconium phosphates vary from turbostratically disordered nanoscale structures to fully ordered ones. We show that a change in the structural order leads to different ion-exchange properties. The samples are characterized using multiple techniques, including powder X-ray diffraction, ion exchange, thermogravimetric analysis, transmission electron microscopy, fast neutron activation analysis, solid-state NMR spectroscopy, IR spectroscopy, and X-ray photoelectron spectroscopy.