Isolated humeral distalization in reverse total shoulder arthroplasty: a biorobotic shoulder simulator study.

BACKGROUND: Humeral distalization is inherent to reverse total shoulder arthroplasty (rTSA) and is often produced with concomitant humeral lateralization via the level of the humeral head cut, implant positioning, implant neck shaft angle, and polymer insert thickness. Biomechanical data on the isolated effects of humeral distalization remain limited but could be important to consider when optimizing postoperative rTSA shoulder function. This study investigated the effects of isolated humeral distalization on shoulder biomechanics using a biorobotic shoulder simulator. METHODS: Eight fresh-frozen cadaveric shoulders were tested using custom polymer inserts that translated the bearing surface 0, +5, +10, and +15 mm along the humeral stem axis, producing isolated distalization without lateralization. Specimens underwent passive elevation in the scapular plane with a static scapula to assess glenohumeral range of motion. Scapular plane abduction motion trajectories were then performed, driven by previously collected scapulothoracic and glenohumeral kinematics from rTSA patients. The effect of isolated distalization on passive elevation was tested using mixed-effects linear regression and the effect on muscle force, joint reaction force, and muscle excursion during active scapular-plane abduction was tested using statistical parametric mapping random effects analysis. RESULTS: Maximum passive scapular plane elevation increased with humeral distalization (4° per 5 mm distalization). During active elevation, deltoid and rotator cuff muscle forces, and joint reaction forces, increased up to 37% per 5 mm of distalization. Simulated deltoid muscle excursion was altered with increasing distalization but amounted to no more than 0.8 mm change from baseline per 5 mm of distalization. Rotator cuff muscles were consistently lengthened throughout abduction, up to 1.6 mm per 5 mm of distalization. These trends were observed across various patient motions. CONCLUSIONS: Isolated humeral distalization caused dramatic increases in the muscle forces required to perform scapular-plane abduction. Joint reaction forces increased correspondingly. These results suggest that implant and surgical strategies to generate deltoid muscle tension without humeral distalization may promote better active range of motion and more durable long-term outcomes over approaches that rely on distalization.

Tenascin C Deletion Impairs Tendon Healing and Functional Recovery After Rotator Cuff Repair.

The biological factors that affect healing after rotator cuff repair (RCR) are not well understood. Genetic variants in the extracellular matrix protein Tenascin C (TNC) are associated with impaired tendon healing and it is expressed in rotator cuff tendon tissue after injury, suggesting it may have a role in the repair process. The purpose of the current study was to determine the role of TNC on tendon healing after RCR in a murine model. The supraspinatus tendon was transected and repaired on the left shoulder of Wild-Type (WT-RCR), Tenascin C null (Tnc --RCR) and Tnc heterozygous (Tnc +/--RCR) mice. Controls included the unoperated, contralateral shoulder of WT-RCR, Tnc - RCR, Tnc +/--RCR mice and unoperated shoulders from age and genotype matched controls. We performed histologic, activity testing, RNA-seq, and biomechanical analyses. At 8-weeks post-RCR, Tnc - and Tnc +/- mice had severe bone and tendon defects following rotator cuff repair. Tnc --RCR mice had reduced activity after rotator cuff repair including reduced wheel rotations, wheel duration, and wheel episode average velocity compared with WT-RCR. Loss of Tnc following RCR altered gene expression in the shoulder, including upregulation of sex hormone and WNT pathways and a downregulation of inflammation and cell cycle pathways. Tnc - mice had similar biomechanical properties after repair as WT. Further research is required to evaluate tissue specific alterations of Tnc, the interactions of Tnc and sex hormone and inflammation pathways as well as possible adjuvants to improve enthesis healing in the setting of reduced TNC function.

Shoulder MCID and PASS Metrics Provide a Foundation for Interpreting Patient-Reported Outcomes.

Limited data have been previously published on minimal clinically important differences (MCIDs) and patient acceptable symptomatic states (PASS) after the treatment of shoulder instability. MCIDs and PASS are useful in understanding how well one treatment performs against another and whether the differences in outcomes between treatments is clinically important to patients supporting either one, performing power calculations for clinical studies and trials and making an assessment as to whether a patient's final clinical state after treatment is reasonable. Anchor-based and distribution methods of MCID calculations have been performed for a variety of patient reported outcome measures after the treatment of shoulder instability. In general, there is a high degree of variability of the MCIDs and PASS metrics reported in a relatively limited number of studies. Because of the importance of these metrics in interpreting clinical data, an emphasis should be placed on improved research to further define these metrics, along with others including substantial clinical benefit (SCB) and maximal outcome improvement (MOI) for a variety of different shoulder instability pathologies as well as treatments. Nevertheless, the initial set of MCIDs and PASS metrics published provide a solid foundation for interpreting patient reported outcome measures in the treatment of shoulder instability.

Patient, imaging, and surgical factors associated with supraspinatus re-tear pattern after rotator cuff repair.

Background: This study aimed to characterize patient, imaging, and surgical factors associated with re-tear patterns after rotator cuff repair, as well as to identify predictors of type 2 failure in a large patient cohort. Methods: A retrospective case-control study was performed at a single urban academic institution. All patients who underwent an arthroscopic rotator cuff repair by 2 fellowship-trained shoulder and elbow surgeons between 2005 and 2022 and were subsequently found to have a symptomatic re-tear on magnetic resonance imaging were included. Patients were characterized as either a type 1 (failure at bone-tendon interface) or type 2 (failure medial to the bone-tendon junction) re-tear based on the Cho classification. Chart review was performed to collect demographic, imaging, and intraoperative surgical factors. Multivariable analysis was performed to determine patient and imaging factors associated with type 2 failure. Results: Fifty-seven patients were included in the study. Overall, 33 (57.9%) patients were classified as a Cho 1 re-tear and 24 (42.1%) were classified as Cho 2 re-tear. No differences in preoperative tear characteristics (tear width, tear retraction, and tendon length) or fatty infiltration were found between Cho 1 and Cho 2 re-tears. Bivariate analysis comparing Cho 1 vs. Cho 2 found male sex was associated with a higher incidence of a Cho 2 re-tear (79.2% vs. 20.8%; P = .033). No significant differences in repair construct (single row vs. double row) (P = .816), biceps treatment (P = .552), concomitant subscapularis repair (P = .306), number of medial anchors (P = .533), or number of lateral anchors (P = .776) were noted between re-tear types. After controlling for potential confounding factors, multivariable regression analysis demonstrated that male sex was predictive of developing a Cho 2 re-tear (odds ratio 3.8; 95% confidence interval 1.1-13.3; P = .039). Repair construct was not found to be predictive of re-tear pattern (P = .580). Conclusion: Repair construct used during rotator cuff repair does not appear to influence re-tear pattern. Male sex was associated with a higher rate of type 2 failure.

Identification of rare genetic variants for rotator cuff tearing and repair in high-risk pedigrees.

Background: Common genetic variants with small effect sizes have been associated with rotator cuff tearing although very few rare, highly penetrant variants have been identified. The purpose of this pilot study was to identify dominant coding variants that segregated with affected individuals in pedigrees at high risk for rotator cuff tears (RCTs). We hypothesize that rare variants contribute to symptomatic RCTs and that they can be identified in related cases with a full-thickness tear requiring surgical management. Methods: We used the Utah Population Database to identify pedigrees that exhibited a significant excess of individuals who had undergone surgical repair of a full-thickness RCT. We analyzed whole exome sequence analysis to identify rare coding variants in 9 independent affected cousin pairs (first or second cousins) who had undergone arthroscopic surgery for repair of a full-thickness RCT (mean age at diagnosis 68 years). Validation of association of the candidate variants with risk for rotator cuff tearing was accomplished utilizing data from the UK Biobank and a separate cohort of unrelated cases of full-thickness RCTs. Results: A total of 82 rare (minor allele frequency <0.005) coding variants were identified as shared in at least one cousin pair affected with full-thickness rotator cuff tearing belonging to a high-risk pedigree, which included variants in RUNX1, ADAM12, TGFBR2, APBB1, PDLIM7, LTBP1, MAP3K4, and MAP3K1. Analysis of 39 of these variants with data available in the UK Biobank (3899 cases with rotator cuff injury and 11,697 matched controls; mean case age 59.9 years) identified a significant association with the APBB1 gene (OR = 2.37, P = .007, uncorrected). The PDLIM7 allele was found to be in significant excess in RCT cases in a separate cohort of Utah patients with full-thickness RCTs (10 carriers out of 458 independent, unrelated patients; minor allele frequency of 0.022) compared to a minor allele frequency of 0.0058 for the European (non-Finnish) control population rate (749 carriers out of 128612 tested) (chi-square test: 19.3 [P < .001]). Discussion: The analysis of closely related individuals with confirmed full-thickness RCTs from high-risk pedigrees has identified 82 rare, shared candidate genetic predisposition coding variants. Association of the PDLIM7 allele with risk for tear was confirmed in an independent cohort of RCTs. Further analysis of the variant alleles is required for confirmation of these genes in rotator cuff tearing.

A transitional pain management program is associated with reduced opioid dependence after major shoulder surgery.

BACKGROUND: Overprescription of opioids in the United States increases risks of opioid dependence, overdose, and death. Increased perioperative and postoperative opioid use during orthopedic shoulder surgery is a significant risk factor for long-term opioid dependence. The authors hypothesized that a multidisciplinary perioperative pain management program (Transitional Pain Service [TPS]) for major shoulder surgery would lead to a reduced amount of opioids required postoperatively. METHODS: A TPS was implemented at a Veterans Affairs Medical Center focused on nonopioid pain management and cessation support. Opioid consumption during the implementation of the TPS was compared to a historical cohort. All patients undergoing total shoulder arthroplasty (TSA) or rotator cuff repair (RCR) were included. The primary outcome was the proportion of patients continuing opioid use at 90 days postoperatively. Secondary outcomes included postoperative pain scores, time to opioid cessation, and median opioid tablets consumed at 90 days. A multivariable model was developed to predict total opioid use at 90 days postoperatively. Kaplan-Meier curves were calculated for time to opioid cessation. RESULTS: The TPS group demonstrated decreased persistent opioid use at 90 days postdischarge (12.6% vs. 28.6%; P = .018). Independent predictors associated with increased total opioid tablet prescriptions at 90 days included length of stay (ß = 19.17), anxiety diagnosis (ß = 37.627), and number of tablets prescribed at discharge (ß = 1.353). TSA was associated with decreased 90-day opioid utilization (ß = -32.535) when compared to RCR. Median time to cessation was shorter in TSA (6 days) when compared with RCR (8 days). Pain scores were reduced compared with population mean by postdischarge day 2 for TSA and by postdischarge day 7 for RCR. Median number of postdischarge opioid tablets (oxycodone 5 mg) consumed under TPS management was 25 in both RCR and TSA surgery groups (180 morphine milligram equivalents). DISCUSSION AND CONCLUSIONS: This study demonstrates that a TPS reduces the amount of opioid use of patients undergoing shoulder arthroplasty or cuff repair at 90 days when compared with a historical control. Multivariable regression indicated that fewer opioid tablets at discharge was a modifiable factor that may aid in reducing opioid consumption and that anxiety diagnosis, increased length of stay, and cuff repair surgery were other factors independently associated with increased opioid consumption. These data will assist surgeons in counseling patients, setting narcotic use expectations, and minimizing overprescribing. Use of a similar multidisciplinary perioperative pain management program may greatly reduce opioid overprescriptions nationally.

Hydrogen Peroxide May Reduce the Risk for Revision Surgery and Infection in Primary Shoulder Arthroplasty: Two-year Follow-up From a Prospective, Blinded, Controlled Trial.

BACKGROUND: The purpose of this study was to determine whether the addition of hydrogen peroxide to the preoperative skin preparation for primary total shoulder arthroplasty is associated with a difference in patient-reported outcomes, risk for postoperative infection, and risk for revision surgery at a minimum of 2-year follow-up. METHODS: This was a prospective, blinded, and controlled trial, which included a consecutive series of patients undergoing primary shoulder arthroplasty. The control group underwent standard sterile skin preparation using ethyl alcohol and ChloraPrep applicators, and the peroxide group had the same preparation with the addition of hydrogen peroxide between the alcohol and ChloraPrep applications. We then compared patient-reported outcome scores (American Shoulder and Elbow Surgeons Shoulder Score [ASES], simple shoulder test [SST], visual analog scale [VAS]), infections, and revision surgeries between the two groups at 2-year follow-up. RESULTS: Of the 61 patients included in the original study, 52 of 58 (85%) living patients agreed to participate in this study. No preoperative differences were observed between groups. No difference was observed in ASES, SST, or VAS scores at 2 years. More revision surgeries were done in the control group (7 versus 2, P = 0.268) and Cutibacterium acnes infections (2 versus 0, P = 0.168). CONCLUSION: The addition of hydrogen peroxide to the preoperative skin preparation before primary shoulder arthroplasty is safe, and additional research is warranted to investigate whether it may decrease the risk for revision surgery and postoperative C acnes infection. LEVEL OF EVIDENCE: III.

Comparison of 3D computer-assisted planning with and without patient-specific instrumentation for severe bone defects in reverse total shoulder arthroplasty.

BACKGROUND: Preoperative planning is an integral aspect of managing complex deformity in reverse shoulder arthroplasty (RSA). The purpose of this study was to compare the success of patient-specific instrumentation (PSI) and 3D computer-assisted planning with standard instrumentation (non-PSI) in achieving planned corrections of the glenoid among patients undergoing RSA with severe bony deformity requiring glenoid bone grafts. METHODS: A retrospective case-control study was performed, including all patients that underwent RSA with combined bone grafting procedures (BIO-RSA or structural bone grafting) for severe glenoid deformity by a single study between June 2016 and July 2023. Patients were required to have preoperative and postoperative CT scans as well as preoperative 3D planning performed for inclusion. Patients were divided into two groups based on the use of 3D computer-assisted planning with or without PSI (PSI vs. non-PSI). The corrected inclination and version were measured by two separate reviewers on preoperative and postoperative 2D CT scans and compared to their corresponding preoperative planning goals utilizing bivariate analyses. RESULTS: We identified 45 patients that met our inclusion criteria (22 PSI and 23 non-PSI). Preoperative inclination (mean ± SD) (PSI 10.12° ± 15.86°, non-PSI 9.43° ± 10.64°; P = .864) and version (PSI -18.78° ± 18.3°, non-PSI -17.82° ± 11.49°; P = .835) measurements were similar between groups. No significant differences in the mean deviation (error) between the postoperative and planned inclination (PSI 5.49° ± 3.72; non-PSI 6.91° ± 5.05; P = .437) and version (PSI 8.37° ± 5.7; non-PSI 5.37° ± 4.43; P = .054) were found between groups. No difference in the rate of outliers (>10° error) was noted in inclination (P = .135) or version (P = .445) between groups. Greater planned version correction was correlated with greater error when PSI was utilized (PSI r = 0.519, P = .013; non-PSI r = 0.362, P = .089). CONCLUSION: Both PSI and 3D computer-assisted planning without PSI (non-PSI) appear to be useful techniques to achieve version and inclination correction among patients undergoing RSA with severe glenoid deformity required glenoid bone grafting with no clear superiority of one method over the other. Surgeons should be aware that when utilizing PSI, slightly greater error in achieving version goals may occur as version correction is increased.

The effect of lateralization and distalization after Grammont-style reverse total shoulder arthroplasty.

BACKGROUND: The purpose of this study was to evaluate the relationship between multiple radiographic measures of lateralization and distalization and clinical outcome scores after a reverse total shoulder arthroplasty (RTSA). METHODS: We retrospectively evaluated all RTSAs performed by the senior author between January 1, 2007, and November 1, 2017. We then evaluated the visual analog scale for pain (VAS pain), Simple Shoulder Test (SST), and American Shoulder and Elbow Surgeons (ASES) scores and complication and reoperation rates at a minimum of 2-year follow-up. We measured preoperative and postoperative (2-week) radiographs for the lateralization shoulder angle (LSA), the distalization shoulder angle (DSA), lateral humeral offset, and the distance from the glenoid to the lateral aspect of the greater tuberosity. A multivariable analysis was performed to evaluate the effect of the postoperative radiographic measurements on final patient-reported outcomes (ASES scores, SST, and VAS pain). RESULTS: The cohort included 216 shoulders from unique patients who had patient-reported outcome scores available at a minimum of 2-year follow-up (average, 4.0 ± 1.9 years) for a total follow-up rate of 70%. In the multivariable models, more lateralization (LSA) was associated with worse final ASES scores -0.52 (95% confidence interval [CI]: -0.88, -0.17; P = .004), and more distalization (DSA) was associated with better final ASES scores 0.40 (95% CI: 0.11, 0.69; P = .007). More lateralization (LSA) was associated with worse final SST scores -0.06 (95% CI: -0.11, -0.003; P = .039). Finally, greater distalization (DSA) was associated with lower final VAS pain scores, ratio = 0.98 (95% CI: 0.96, 1.00; P = .021). CONCLUSIONS: Greater distalization and less lateralization are associated with better function and less pain after a Grammont-style RTSA. When using a Grammont-style implant, remaining consistent with Grammont's principles of implant placement will afford better final clinical outcomes.

Three-month Delay in Rotator Cuff Repair: 2-year Follow-up.

INTRODUCTION: This study examined 2-year outcomes of patients who underwent delayed rotator cuff repair (RCR) compared with those who underwent RCR without delay. METHODS: In this prospective comparative study, two groups were formed: (1) patients planning RCR during a 6-week elective surgery ban and (2) patients undergoing RCR at least 6 weeks after the ban. The Simple Shoulder Test, American Shoulder and Elbow Surgeon score, and visual analog scale for pain were collected preoperatively and at 2 years postoperatively. Magnetic resonance imaging assessed healing 6 months postoperatively. RESULTS: With a 93.3% 2-year follow-up (13/15 delay group, 15/15 control), there was an 87-day difference in presentation to surgery (P = 0.001), with no significant preoperative demographic or tear characteristic differences between groups. Intraoperatively, there were no differences between groups in repair characteristics. Preoperative versus postoperative differences in American Shoulder and Elbow Surgeon score (P < 0.001), visual analog scale (P < 0.001), and Simple Shoulder Test scores (P < 0.001) were significant but not between groups (P = 0.650, 0.586, 0.525). On MRI, 58% in the delay group and 85% in the control group had healed (P = 0.202). DISCUSSION: Although a 3-month delay showed no statistically significant effect on outcomes, the delay group had an approximately 27% higher failure rate. Thus, although a 3-month period of nonsurgical treatment before RCR may be reasonable, larger studies are warranted for definitive conclusions.

Estrogen and testosterone supplementation improves tendon healing and functional recovery after rotator cuff repair.

Failure of healing after rotator cuff repair (RCR) is common. The purpose of the current study was to evaluate the effect of systemic estrogen or testosterone supplementation on tendon healing after RCR. Seventy-two adult male mice were utilized for all experiments. The supraspinatus tendon was transected and repaired with 6-0 Prolene suture on the left shoulder of 51 animals. Mice were segregated into three groups postoperative: (1) vehicle group (VG; n = 18), (2) estrogen group (EST; n = 17), and (3) testosterone group (TST; n = 16). An unrepaired control group (unrepaired, n = 21) did not have surgery. Utilizing these animals, histological analysis, activity testing, biomechanical testing and RNA sequencing (RNA-seq) was performed. At 8 weeks post-RCR, TST, and EST supplementation improved the overall histologic structure of the repaired enthesis site. No differences in ultimate failure loads or stiffness were detected between VG, EST, and TST groups after biomechanical testing. RCR caused a reduction in wheel activity compared to unrepaired controls and supplementation with TST restored wheel activity. RNA-seq analysis indicated that estrogen and testosterone regulated different pathways associated with enthesis healing, including a suppression of inflammatory signaling. Supplementation with sex hormones improved the structure of the repaired tendon enthesis and significantly regulated expression of diverse pathways regulating multiple biological processes. Testosterone administration following RCR restored wheel activity without having a detrimental impact on biomechanical strength. Future human studies of sex hormone supplementation after RCR are warranted as supplementation in an animal model may improve tendon enthesis healing.

Preoperative Planning Software Does Not Accurately Predict Range of Motion in Reverse Total Shoulder Arthroplasty.

BACKGROUND: The purpose of this study was to determine whether preoperative planning software (PPS) accurately predicts clinical range of motion (ROM) in patients with reverse total shoulder arthroplasty 1 year postoperatively with preoperative and postoperative computed tomography (CT) scans. METHODS: This was a retrospective study of 16 reverse total shoulder arthroplasty patients with preoperative and postoperative (CT) scans obtained at least 1 year postoperatively. Clinical ROM was measured in abduction, external rotation at resting abduction, extension, and flexion at a minimum of 1 year postoperatively. All clinical measurements were obtained before generation of PPS ROM values. Using postoperative CT scans, the achieved implant component positions were quantified and then replicated in PPS on the preoperative CT scans. The preoperative predicted ROM was then recorded, both with and without osteophyte removal. Bland-Altman plots were generated within each motion comparing the differences between clinically measured motion and software-predicted motion. RESULTS: The variation in clinically measured ROM in abduction, external rotation at resting abduction, extension, and flexion were 118 ± 27 (65° to 180°), 33 ± 16 (10° to 75°), 56 ± 8 (50° to 65°), and 137 ± 25 (80° to 160°), respectively. Clinically measured motion differed greatly from PPS-predicted ROM, with mean differences of 33 ± 29 (-32 to 93) for abduction, 44 ± 25 (-38 to 57) for external rotation, 44 ± 25 (-35 to 65) for extension, and 54 ± 50 (-51 to 147) for flexion with no significant correlations between clinically measured and PPS-predicted ROM ( P > 0.05). With humeral or humeral and glenoid osteophyte resection, correlations for only flexion became significant ( P = 0.002 for both). CONCLUSION: The passive glenohumeral impingement-free ROM generated from PPS incompletely predicts clinically measured active humerothoracic ROM, possibly because of the unmeasured factors of soft-tissue tension, muscular strength, humeral torsion, resting scapular posture, and, most importantly, scapulothoracic motion. LEVEL OF EVIDENCE: IV.

Biomechanical comparison of suture bridge rotator cuff repair with and without dermal allograft pledgets.

BACKGROUND: One method to augment rotator cuff repair is to pass dermal allograft pledgets along the sutures that bridge from the medial to the lateral row. It remains unclear whether this augmentation method alters repair biomechanics. METHODS: This was a controlled laboratory study. After an a priori power analysis, 9 pairs of rotator cuffs underwent double-row suture bridge rotator cuff repair, half randomized to augmentation with dermal allograft pledgets passed along the suture bridge sutures. Repairs were then mounted on a material testing system and loaded cyclically 500 cycles to measure applied force and displacement. Repairs then underwent ultimate failure testing, and stiffness, ultimate failure force, and ultimate failure displacement were measured. Paired t tests were performed to compare between groups. RESULTS: There were no differences between groups in construct gapping with cyclic loading after 500 cycles (P = .885). There were no differences between the augmented and control groups in yield force (103.5 ± 5.0 vs. 101.4 ± 5.9 N, respectively, P = .183), stiffness (94.2 ± 13.9 vs. 90.9 ± 13.8, P = .585), or ultimate failure force (255.3 ± 65.8 vs. 285.3 ± 83.2, P = .315). There were no differences between groups in failure modes, with most specimens failing by cuff tissue tearing within or medial to the construct. CONCLUSION: The addition of dermal allograft pledgets does not positively or negatively influence the time-zero biomechanical characteristics of double-row suture bridge rotator cuff repair.

Common Complication From Routine Shoulder Surgery: Postoperative Stiffness After Rotator Cuff Repair.

Rotator cuff repair is commonly performed, and stiffness represents one of the most common complications. Unique characteristics of postoperative stiffness, including its natural history and pathoanatomy, differentiate it from other etiologies of shoulder stiffness. Patient risk factors that have been associated with postoperative stiffness should be reviewed to better help clinicians tailor their presurgical risk assessment. Although stiffness in this setting has clinical consequences for patients' postoperative shoulder function, it is important to discuss the important implications of stiffness as it relates to rotator cuff healing. Multiple strategies have been proposed to decrease the incidence of postoperative stiffness. There is evidence to support these preventive strategies, and it has led to author recommendations for treatment of refractory cases and prevention.

Inlay vs. onlay humeral components in reverse total shoulder arthroplasty: a biorobotic shoulder simulator study.

BACKGROUND: Both inlay and onlay humeral implants are available for reverse total shoulder arthroplasty (rTSA), but biomechanical data comparing these components remain limited. This study investigated the effects of inlay and onlay rTSA humeral components on shoulder biomechanics using a biorobotic shoulder simulator. METHODS: Twenty fresh-frozen cadaveric shoulders were tested before and after rTSA with either an inlay or onlay humeral implant. Comparisons were performed between the most commonly implanted configurations for each implant (baseline) and with a modification to provide equivalent neck-shaft angles (NSAs) for the inlay and onlay configurations. Specimens underwent passive range-of-motion (ROM) assessment with the scapula held static, and scapular-plane abduction was performed, driven by previously collected human-subject scapulothoracic and glenohumeral kinematics. Passive ROM glenohumeral joint angles were compared using t tests, whereas muscle force and excursion data during scapular-plane elevation were evaluated with statistical parametric mapping and t tests. RESULTS: Maximum passive elevation was reduced for the inlay vs. onlay humeral components, although both implants caused reduced passive elevation vs. the native joint. Inlay rTSA also demonstrated reduced passive internal rotation at rest and increased external rotation at 90° of humerothoracic elevation vs. the native joint. All preoperative planning estimates of ROM differed from experiments. Rotator cuff forces were elevated with an onlay vs. inlay humeral implant, but simulated muscle excursions did not differ between systems. Compared with the native joint, rotator cuff forces were increased for both inlay and onlay implants and deltoid forces were reduced for inlay implants. Muscle excursions were dramatically altered by rTSA vs. the native joint. Comparisons of inlay and onlay humeral implants with equivalent NSAs were consistent with the baseline comparisons. CONCLUSIONS: Rotator cuff forces required to perform scapular-plane abduction increase following rTSA using both inlay and onlay implants. Rotator cuff forces are lower with inlay implants compared with onlay implants, although inlay implants also result in reduced passive-elevation ROM. Deltoid forces are lower with inlay implants in comparison to the native joint but not with onlay implants. The differences between inlay and onlay components are largely unaffected by NSA, indicating that these differences are inherent to the inlay and onlay designs. In those patients with an intact rotator cuff, decreased rotator cuff forces to perform abduction with an inlay humeral implant compared with an onlay implant may promote improved long-term outcomes owing to reduced deltoid muscle fatigue when using an inlay implant.

Revision Subpectoral Biceps Tenodesis Demonstrates a High Patient Satisfaction and Good Functional Outcomes.

Purpose: To clinically evaluate a subset of patients who underwent a revision subpectoral biceps tenodesis for a clinically failed proximal biceps tenodesis. Methods: This is a retrospective case series of patients with at least 2-year follow-up who had undergone a revision biceps tenodesis after clinical failure of a proximal biceps tenodesis between January 2008 and February 2020 by a single surgeon. Patients who underwent concomitant procedures, such as revision cuff repair, were excluded. Patients with a minimum of 2 years duration status postrevision subpectoral tenodesis were contacted for informed consent and outcome data, which included Simple Shoulder Test, American Shoulder and Elbow Surgeons score, visual analog scale for pain, and subjective reporting of arm weakness and satisfaction. Results: Fourteen patients were initially identified as meeting inclusion criteria with a minimum 2-year follow-up achieved for 11 of 14 patients (78.5% follow-up). The mean follow-up time was 8.1 years (range, 2.7-14.8 years). After the primary biceps tenodesis, a mean of 8.0 ± 9.6 months passed before the revision subpectoral biceps tenodesis was performed. The average postoperative active forward elevation and adducted external rotation were 159 ± 7° and 47 ± 17°, respectively. The mean ± standard deviation (range) follow-up American Shoulder and Elbow Surgeons score was 79 ± 23 (30-100), Simple Shoulder Test was 11 ± 2 (7-12), and visual analog scale for pain was 2.6 ± 2.8 (0-9). All 11 patients reported being satisfied with their operation and would elect to have the operation again. Conclusions: Revision subpectoral biceps tenodesis is a viable procedure for addressing patients with persistent pain following initial proximal biceps tenodesis. Although some persistent pain is common, revision subpectoral biceps tenodesis demonstrates a high patient satisfaction and good functional outcomes. Level of Evidence: Level IV, therapeutic case series.

Comparing outcomes of central ingrowth peg vs. noningrowth pegged glenoid components during revision to reverse total shoulder arthroplasty.

Background: One innovation to reduce glenoid loosening in total shoulder arthroplasty (TSA) is a large, central ingrowth peg. However, when bone ingrowth fails to occur, there is often increased bone loss surrounding the central peg which may increase complexity of subsequent revisions. Our goal was to compare outcomes between central ingrowth pegs and noningrowth pegged glenoid components during revision to reverse total shoulder arthroplasty. Methods: In a comparative retrospective case series, all patients who underwent TSA-to-reverse TSA revision between 2014 and 2022 were reviewed. Demographic varibles as well as clinical and radiographic outcomes were collected. Ingrowth central peg and noningrowth pegged glenoid groups were compared using t-test, Mann-Whitney U, Chi-Square, or Fisher's exact tests where indicated. Results: Overall, 49 patients were included: 27 underwent revision from noningrowth and 22 from central ingrowth components. Females more commonly had noningrowth components (74% vs. 45%, P = .04) and preoperative external rotation was higher in central ingrowth components (P = .02). Time to revision was significantly earlier in central ingrowth components (2.4 vs. 7.5 years, P = .01). Structural glenoid allografting was required more with noningrowth components (30% vs. 5%, P = .03) and time to revision in patients ultimately requiring allograft reconstruction was significantly later (9.96 vs. 3.68 years, P = .03). Conclusion: Central ingrowth pegs on glenoid components were associated with decreased need for structural allograft reconstruction during revision; however, time to revision was earlier in these components. Further research should focus on whether glenoid failure is due to glenoid component design, time to revision, or both.

Progression of symptomatic bilateral rotator cuff disease.

Background: Prior studies have demonstrated that conservatively treated rotator cuff tears and rotator cuff tendinopathy may continue to progress. It is unclear whether that rate of progression differs between sides in patients with bilateral disease. This study evaluated the likelihood of progression of rotator cuff disease as confirmed via magnetic resonance imaging (MRI) in individuals with symptomatic bilateral pathology, treated conservatively for a minimum of 1 year. Methods: We identified patients with bilateral rotator cuff disease confirmed via MRI within the Veteran's Health Administration electronic database. A retrospective chart review via the Veteran's Affairs electronic medical record was performed. Progression was determined using 2 separate MRIs with a minimum of 1 year apart. We defined progression as (1) a progression from tendinopathy to tearing, (2) an increase from partial-thickness to full-thickness tearing, or (3) an increase in tear retraction or tear width of at least 5 mm. Results: Four hundred eighty MRI studies from 120 Veteran's Affair patients with bilateral, conservatively treated rotator cuff disease were evaluated. Overall, 42% (100/240) of rotator cuff disease had progressed. No significant difference was found between progression of right vs. left rotator cuff pathology, with right shoulder pathology progressing at a rate of 39% (47/120), while left shoulder disease progressed at a rate of 44% (53/120). The likelihood of disease progression was associated with less initial tendon retraction (P value = .016) and older age (P value = .025). Conclusions: Rotator cuff tears are no more likely to progress on the right, as compared to the left side. Older age and less initial tendon retraction were found to be predictors of disease progression. These suggest that higher activity level may not associate with greater progression of rotator cuff disease. Future prospective studies evaluating progression rates between dominant vs. nondominant shoulders are warranted.

Abnormal Laboratory Values for Metabolic and Hormonal Syndromes Are Prevalent Among Patients Undergoing Rotator Cuff Repair.

Purpose: To determine the prevalence of systemic laboratory abnormalities among patients undergoing rotator cuff repair (RCR). Methods: Patients who underwent RCR at the authors' institution for 1 year between October 2021 to September 2022 were retrospectively identified. Preoperative laboratory values, including serum sex hormones, vitamin D, hemoglobin A1C, and a lipid panel, were obtained as part of our routine practice during the study period. Demographics and tear characteristics were compared in patients with laboratory data and those without. For included patients with laboratory data, mean laboratory values and percentage of patients with abnormal laboratory values were recorded. Results: During a 1-year period of time, 135 RCRs were performed, of which preoperative labs were obtained on 105. Of these, 67% were sex hormone deficient, 36% were vitamin D deficient, 45% had an abnormal hemoglobin A1C, and 64% had an abnormal lipid panel. In total 4% had "normal" labs. Conclusions: In this retrospective study, sex hormone deficiency is highly prevalent among patients undergoing RCR. Nearly all patients undergoing RCR have systemic laboratory abnormalities involving either sex hormone deficiency, vitamin D deficiency, dyslipidemia, and/or prediabetes. Level of Evidence: Level IV, prognostic case series.

Adhesive Capsulitis.

Adhesive capsulitis, colloquially known as "frozen shoulder," is a relatively common disorder, affecting approximately 2% to 5% of the general population. The incidence may be higher as the condition can be relatively mild and self-limited and thus many patients who experience it may never present for treatment. It involves a pathologic process of gradual fibrosis of the glenohumeral joint that leads to limited active and passive range of motion, contracture of the joint capsule, and shoulder pain.