RESUMEN
Metal-organic frameworks (MOFs) as solid sorbents for carbon dioxide (CO2) capture face the challenge of merging efficient capture with economical regeneration in a durable, scalable material. Zinc-based Calgary Framework 20 (CALF-20) physisorbs CO2 with high capacity but is also selective over water. Competitive separations on structured CALF-20 show not just preferential CO2 physisorption below 40% relative humidity but also suppression of water sorption by CO2, which was corroborated by computational modeling. CALF-20 has a low enthalpic regeneration penalty and shows durability to steam (>450,000 cycles) and wet acid gases. It can be prepared in one step, formed as composite materials, and its synthesis can be scaled to multikilogram batches.
RESUMEN
Arranging ionic liquids (ILs) with long-range order can not only enhance their performance in a desired application, but can also help elucidate the vital between structure and properties. However, this is still a challenge and no example has been reported to date. Herein, we report a feasible strategy to achieve a crystalline IL via coordination self-assembly based reticular chemistry. IL1 MOF, was prepared by designing an IL bridging ligand and then connecting them with metal clusters. IL1 MOF has a unique structure, where the IL ligands are arranged on a long-range ordered framework but have a labile ionic center. This structure enables IL1 MOF to break through the typical limitation where the solid ILs have lower proton conductivity than their counterpart bulk ILs. IL1 MOF shows 2-4 orders of magnitude higher proton conductivity than its counterpart IL monomer across a wide temperature range. Moreover, by confining the IL within ultramicropores (<1â nm), IL1 MOF suppresses the liquid-solid phase transition temperatures to lower than -150 °C, allowing it to function with high conductivity in a subzero temperature range.
RESUMEN
Water confined within one-dimensional (1D) hydrophobic nanochannels has attracted significant interest due to its unusual structure and dynamic properties. As a representative system, water-filled carbon nanotubes (CNTs) are generally studied, but direct observation of the crystal structure and proton transport is difficult for CNTs due to their poor crystallinity and high electron conduction. Here, we report the direct observation of a unique water-cluster structure and high proton conduction realized in a metal-organic nanotube, [Pt(dach)(bpy)Br]4(SO4)4·32H2O (dach: (1R, 2R)-(-)-1,2-diaminocyclohexane; bpy: 4,4'-bipyridine). In the crystalline state, a hydrogen-bonded ice nanotube composed of water tetramers and octamers is found within the hydrophobic nanochannel. Single-crystal impedance measurements along the channel direction reveal a high proton conduction of 10-2 Scm-1. Moreover, fast proton diffusion and continuous liquid-to-solid transition are confirmed using solid-state 1H-NMR measurements. Our study provides valuable insight into the structural and dynamical properties of confined water within 1D hydrophobic nanochannels.
RESUMEN
We report the synthesis and characterization of highly active Cu nanoparticles covered with zirconium/hafnium-based metal-organic frameworks for CO2 hydrogenation to methanol. Compared to Cu/γ-Al2O3 , Cu/ZIF-8, Cu/MIL-100 and Cu/UiO-66 composites, UiO-66 acts as the most active support, with Cu/Zr-UiO-66 producing methanol at a rate 70 times higher than that of Cu/γ-Al2O3 . In addition, the replacement of Zr4+ with Hf4+ in UiO-66 tripled in the rate of methanol production. Furthermore, we describe a substituent effect on the catalytic activity, with Cu/Zr-UiO66-COOH providing a three-fold enhancement of methanol production, compared to that of Zr-UiO-66 or Zr-UiO66-NH2 . The enhanced catalytic activity of Cu nanoparticles depends on the charge transfer degree from Cu nanoparticles to UiO-66 at the interface between Cu nanoparticles and UiO-66.
RESUMEN
Seven isomorphous lanthanide metal-organic frameworks in the PCMOF-5 family, [Ln(H5L)(H2O)n](H2O) (L = 1,2,4,5-tetrakis(phosphonomethyl)benzene, Ln = La, Ce, Pr, Nd, Sm, Eu, Gd) have been synthesized and characterized. This family contains 1-D water-filled channels lined with free hydrogen phosphonate groups and gives a very low activation energy pathway for proton transfer. The lanthanide contraction was employed to systematically vary the unit cell dimensions and tune the proton conducting pathways. LeBail fitting of the crystalline series shows that the crystallographic a-axis, along the channel, can be varied in increments less than 0.02 Å correspondingly shortening the proton transfer pathway. The proton conductivities for the La and Pr complexes were roughly an order of magnitude higher than other members of the series (10-3 S cm-1 versus 10-4 S cm-1). Single crystal structures of the high and low conducting members of the series (La, Pr for high and Ce for low) affirm the structural similarities extend beyond the unit cell parameters to positions of free acid groups and included water molecules. Scanning electron microscopy reveals marked differences in particle size of the different members of the Ln series owing to lattice strain effects induced by changing the lanthanide. Notably, the high conducting La and Pr complexes have the largest particle sizes. This result contradicts any notion that degradation of the MOF at grain boundaries is enabling the observed conductivity as proton conduction dominated by extrinsic pathways would be enabled by small particles (i.e., the La and Pr complexes would be the worst conductors). Proton conductivity measurements of a ball milled sample of the La complex corroborate this result.
RESUMEN
To develop proton-conducting materials under low-humidity conditions and at moderate working temperature still remains challenging for fuel-cell technology. Here, a new type of proton-conducting material, EIMS-HTFSA@MIL, which was prepared by impregnating the binary ionic liquid, EIMS-HTFSA (EIMS=1-(1-ethyl-3-imidazolium)propane-3-sulfonate; HTFSA=N,N-bis(trifluoromethanesulfonyl)amide), into a mesoporous metal-organic framework, MIL-101 ([Cr3 F(H2 O)2 O(BDC)3 â n H2 O] (n≈0.25, BDC=1,4-benzenedicarboxylate)) is reported. By taking advantage of the ionic-liquid properties, such as high thermal stability, non-volatility, non-flammability, and low corrosivity, EIMS-HTFSA@MIL shows potential application as a safe electrolyte in proton conduction above 100 °C.
RESUMEN
On the basis of the results of first-principles band calculations, we report a strategy for the development of a conducting metal-organic framework (MOF). The charge carrier in a zirconium-based MOF, MIL-140A, is expected to be localized because of a mismatch of the energy levels of bridging ligands' π* and Zr 4d orbitals. On the basis of the findings, we propose a candidate structure for a conducting MOF.
RESUMEN
Understanding the role that crystal imperfections or defects play on the physical properties of a solid material is important for any application. In this report, the highly unique crystal structure of the metal-organic framework (MOF) zirconium 2-sulfoterephthalate is presented. This MOF contains a large number of partially occupied ligand and metal cluster sites which directly affect the physical properties of the material. The partially occupied ligand positions give rise to a continuum of pore sizes within this highly porous MOF, supported by N2 gas sorption and micropore analysis. Furthermore, this MOF is lined with sulfonic acid groups, implying a high proton concentration in the pore, but defective zirconium clusters are found to be effective proton trapping sites, which was investigated by a combination of AC impedance analysis to measure the proton conductivity and DFT calculations to determine the solvation energies of the protons in the pore. Based on the calculations, methods to control the pKa of the clusters and improve the conductivity by saturating the zirconium clusters with strong acids were utilized, and a 5-fold increase in proton conductivity was achieved using these methods. High proton conductivity of 5.62 × 10(-3) S cm(-1) at 95% relative humidity and 65 °C could be achieved, with little change down to 40% relative humidity at room temperature.
RESUMEN
We demonstrate a novel, simple synthetic method for metal (Ni) NPs in a MOF using the partial thermal decomposition of nickel(II) 2,5-dihydroxyterephthalate (Ni-MOF-74). The Ni NPs inside the Ni-MOF-74 are several nanometers in size, and the size can be precisely controlled by the heating conditions.
RESUMEN
Presented here is the synthesis of an ordered bcc copper-palladium nanoalloy, via the decomposition of a Pd nanoparticle@metal-organic framework composite material. In situ XRD measurements were performed in order to understand the mechanism of the decomposition process. This result gives a further perspective into the synthesis of new nanomaterials via metal-organic framework decomposition.
Asunto(s)
Cobre/química , Nanopartículas del Metal/química , Compuestos Organometálicos/química , Paladio/química , Aleaciones , Calor , Hidrógeno/química , Difracción de Rayos XRESUMEN
Hydrogen is an essential component in many industrial processes. As a result of the recent increase in the development of shale gas, steam reforming of shale gas has received considerable attention as a major source of H2, and the more efficient use of hydrogen is strongly demanded. Palladium is well known as a hydrogen-storage metal and an effective catalyst for reactions related to hydrogen in a variety of industrial processes. Here, we present remarkably enhanced capacity and speed of hydrogen storage in Pd nanocrystals covered with the metal-organic framework (MOF) HKUST-1 (copper(II) 1,3,5-benzenetricarboxylate). The Pd nanocrystals covered with the MOF have twice the storage capacity of the bare Pd nanocrystals. The significantly enhanced hydrogen storage capacity was confirmed by hydrogen pressure-composition isotherms and solid-state deuterium nuclear magnetic resonance measurements. The speed of hydrogen absorption in the Pd nanocrystals is also enhanced by the MOF coating.
RESUMEN
We report that a new 2D 3d-4f phosphonate [Co(III)La(III)(notpH)(H2O)6]ClO4·5H2O (CoLa-II) can undergo a phase transition above 45 °C and 93% relative humidity, resulting in [H3O][CoLa(notp)(H2O)4]ClO4·3H2O (CoLa-III). The transition is accompanied by the release of the proton from intralayer to interlayer, and thus the proton conductivity of the material is increased by 1 order of magnitude.
RESUMEN
Metal-organic framework (MOF) materials are a nontraditional route to ion conductors, but their crystallinity can give insight into molecular-level transport mechanisms. However, some MOFs can be structurally compromised in humid environments. A new 3D metal-organic framework, PCMOF-5, is reported which conducts protons above 10(-3) S/cm at 60 °C and 98% relative humidity. The MOF contains free phosphonic acid groups, shows high humidity stability, and resists swelling in the presence of hydration. Channels filled with crystallographically located water and acidic groups are also observed.
Asunto(s)
Compuestos Organometálicos/química , Protones , Agua/química , Humedad , Modelos Moleculares , SolubilidadRESUMEN
Using the concept of isomorphous replacement applied to entire ligands, a C(3)-symmetric trisulfonate ligand was substituted with a C(3)-symmetric tris(hydrogen phosphonate) ligand in a proton conducting metal-organic framework (MOF). The resulting material, PCMOF2½, has its proton conduction raised 1.5 orders of magnitude compared to the parent material, to 2.1 × 10(-2) S cm(-1) at 90% relative humidity and 85 °C, while maintaining the parent MOF structure.
Asunto(s)
Compuestos Organometálicos/química , Protones , Ligandos , Modelos MolecularesRESUMEN
A new porous metal-organic framework (MOF), barium tetraethyl-1,3,6,8-pyrenetetraphosphonate (CALF-25), which contains a new phosphonate monoester ligand, was synthesized through a hydrothermal method. The MOF is a three-dimensional structure containing 4.6 Å × 3.9 Å rectangular one-dimensional pores lined with the ethyl ester groups from the ligand. The presence of the ethyl ester groups makes the pores hydrophobic in nature, as determined by the low heats of adsorption of CH(4), CO(2), and H(2)O (14.5, 23.9, and 45 kJ mol(-1), respectively) despite the polar and acidic barium phosphonate ester backbone. The ethyl ester groups within the pores also protect CALF-25 from decomposition by water vapor, with crystallinity and porosity being retained after exposure to harsh humid conditions (90% relative humidity at 353 K). The use of phosphonate esters as linkers for the construction of MOFs provides a method to protect hydrolytically susceptible coordination backbones through kinetic blocking.
RESUMEN
A new phosphonate metal-organic framework (MOF) with a layered motif but not that of the classical hybrid inorganic-organic solid is presented. Zn(3)(L)(H(2)O)(2)·2H(2)O (L = [1,3,5-benzenetriphosphonate](6-)), henceforth denoted as PCMOF-3, contains a polar interlayer lined with Zn-ligated water molecules and phosphonate oxygen atoms. These groups serve to anchor free water molecules into ordered chains, as observed by X-ray crystallography. The potential for proton conduction via the well-defined interlayer was studied by (2)H solid-state NMR spectroscopy and AC impedance spectroscopy. The proton conductivity in H(2) was measured as 3.5 × 10(-5) S cm(-1) at 25 °C and 98% relative humidity. More interestingly, an Arrhenius plot gave a low activation energy of 0.17 eV for proton transfer, corroborating the solid-state NMR data that showed exchange between all deuterium sites in the D(2)O analogue of PCMOF-3, even at -20 °C.
RESUMEN
Recent progress in phosphonate and sulfonate MOFs is reviewed with an emphasis on open frameworks. These two ligating functionalities are paired due to their structural analogy but the review will show that their differences likely outweigh their similarities when it comes to their framework structures and properties. Examples that are highlighted focus on new routes to open structures, demonstrations of porosity and functionality, and examples with dynamic structures. This critical review is geared to researchers interested in designing open framework solids (134 references).
RESUMEN
Silver-containing layered networks of the form [Ag(L)] (L = 4-pyridinesulfonate or p-toluenesulfonate) were treated with primary amines in different ratios. The structures of the parent supramolecular networks are well-known; however, their interactions with primary amines lead to the formation of new layered materials for which single-crystal X-ray structures cannot be obtained. Solid-state (109)Ag, (15)N, and (13)C cross-polarization magic-angle spinning (CP/MAS) NMR experiments, in combination with powder X-ray diffraction experiments and ab initio calculations, are utilized to investigate the interactions between the primary amines and the parent materials, and to propose structural models for the new materials. (109)Ag chemical shift (CS) tensor parameters are extremely sensitive to changes in silver environments; hence, (1)H-(109)Ag CP/MAS NMR experiments are used to distinguish and characterize silver sites. The combination of (109)Ag and (15)N NMR experiments on starting materials and samples prepared with both (15)N-labeled and unlabeled amines permits the accurate measurements of indirect (1)J((109)Ag,(15)N) and (1)J((109)Ag,(14)N) spin-spin coupling constants, providing further information on structure and bonding in these systems. First principles calculations of silver CS tensors and (1)J((109)Ag,(14)N) coupling constants in model complexes aid in formulating the proposed structural models for the new materials, which are largely comprised of layers of silver-diamine cations.