Polymer-Based Functional Materials Loaded with Metal-Based Nanoparticles as Potential Scaffolds for the Management of Infected Wounds.

Wound infection due to bacterial invasion at the wound site is one of the primary challenges associated with delayed wound healing. Microorganisms tend to form biofilms that protect them from harm, leading to their multidrug resistance. The alarming increase in antibiotic resistance poses a threat to wound healing. Hence, the urgent need for novel wound dressing materials capable of managing bacterial infection is crucial for expediting wound recovery. There is considerable interest in polymeric wound dressings embedded with bioactive substances, such as metal-based nanoparticles, as potential solutions for treating microbially infected wounds. Metal-based nanoparticles have been widely used for the management of infected wounds due to their broad antimicrobial efficacy. This review focuses on polymer-based and bioactive wound dressings loaded with metal-based nanoparticles like silver, gold, magnesium oxide, or zinc oxide. When compared, zinc oxide-loaded dressings exhibited higher antibacterial activity against Gram-positive strains and silver nanoparticle-loaded dressings against gram-negative strains. However, wound dressings infused with both nanoparticles displayed a synergistic effect against both strains of bacteria. Furthermore, these dressings displayed antibiofilm activity and the generation of reactive oxygen species while accelerating wound closure both in vitro and in vivo.

Effective removal of malachite green oxalate from aqueous solution using Newbouldia laevis husk/MWCNTs nanocomposite: equilibrium, kinetics, and thermodynamics.

The discharge of colored effluent into water bodies is a big concern; hence, the current work was designed to fabricate a superior nanocomposite (NBM) using the Newbouldia laevis husk (NB) and functionalized multiwalled carbon nanotubes (f-MWCNTs) for the adsorption of malachite green oxalate (MGO). Brunauer-Emmett-Teller (BET) surface analysis was used to assess the specific surface area of NB (0.7699 m2 g-1) and NBM (94.006 m2 g-1). Fourier transform infrared spectroscopy (FTIR) was employed to determine the chemical moieties on the surface of the adsorbent. Field emission scanning electron microscopy (FESEM) and thermogravimetric analysis (TGA) were used to analyze the surface morphology and the thermal behavior of the adsorbents. Essential factors of the adsorption process were investigated, and it was revealed that pH 6.0, adsorbent dose of 0.05 g, contact time 80 min, concentration of 100 mg dm-3 and maximum adsorption capacity of 35.78 mg g-1 (NB) and 69.97 mg g-1 (NBM) were the optimal parameters. The NB and NBM adsorption processes followed a pseudo-first-order kinetic model. The exothermic and endothermic adsorptive processes were noticed to be the best descriptions of MGO elimination by NB and NBM, respectively. The uptake of MGO by NB and NBM was best described by models of Freundlich and Langmuir isotherms. Besides, NBM demonstrated uptake efficiency that is >80% after the fourth adsorption/desorption cycle. As a result, NBM has a wide range of possible uses in environmental remediation.

The husk of Newbouldia laevis is a frequent waste that must be managed properly. This paper describes the application of Newbouldia laevis husk as a value-added material for the design of a water treatment agent. The use of carbon nanotube in the modification of Newbouldia laevis husk would have a synergistic effect on the overall property of the nanocomposite. Nanocomposite synthesized from multiwalled carbon nanotubes (MWCNTs) and Newbouldia laevis husk were characterized and used for the sequestration of malachite green oxalate from contaminated water. Our primary goal is to optimize the nanocomposite by varying factors of adsorption such as solution pH, equilibrium, kinetic, thermodynamic, and regeneration studies. We believe that this study will contribute to the existing knowledge of Newbouldia laevis husk. Owing to the exceptional potential of the nanocomposite, this adsorbent can be extended to possible field applications.

Preparation and characterization of Allium cepa extract coated biochar and adsorption performance for hexavalent chromium.

The elimination of hazardous metal ions from contaminated water has been an important procedure to improve the quality of the water source. Hence, this study presents the fabrication of Allium cepa extract-coated biochar for the elimination of Cr (VI) from wastewater. The synthesized biochar (SBCH) and modified biochar (BMOJ) were characterized by making use of FTIR, BET, XRD, TGA and SEM. Optimum Cr (VI) removal was achieved at solution pH 2, 0.05 g adsorbent dosage and 180 min agitation period. The adsorptive removal of Cr (VI) onto SBCH and BMOJ followed the pseudo-second-order kinetic model with a satisfactory sum of square residuals (SSR) of 3.874 and 5.245 for SBCH and BMOJ, respectively. Meanwhile, Freundlich isotherm was found to best describe the uptake of Cr (VI) SBCH and BMOJ. Experimental data showed an adsorption capacity of 37.38 and 25.77 mg g-1 and a maximum efficiency of 85.42% and 51.63% for BMOJ and SBCH, respectively. BMOJ also showed good antioxidant characteristics. Thermodynamic data revealed that the uptake of Cr (VI) onto the SBCH and BMOJ was an exothermic and endothermic (ΔH: SBCH = - 16.22 kJ mol-1 and BMOJ = 13.74 kJ mol-1), entropy-driven (ΔS: SBCH = 40.96 J K-1 mol-1 and BMOJ = 93.26 J K-1 mol-1) and spontaneous process. Furthermore, BMOJ demonstrated excellent reusability and promising characteristics for industrial applications.

Thermodynamics, kinetics and isothermal studies of tartrazine adsorption onto microcline/MWCNTs nanocomposite and the regeneration potentials.

The quest for a cheap, effective, and eco-friendly wastewater treatment technique that is free of secondary toxic byproducts, calls for the fabrication of a nature-friendly adsorbent with a robust capacity to decontaminate polluted water sources and be recycled. To this end, we report the fabrication of novel nanocomposite (KMCM) from microcline (KMC) and multiwall carbon nanotubes (MWCNTs). The adsorbents (KMC and KMCM) were characterized using XRD, BET, SEM, TGA and FTIR. The novel and low-cost nano sorbent were designed for the elimination of tartrazine (Tatz) from wastewater. The adsorption of Tatz onto KMC and KMCM was influenced by adsorbent dose, initial Tatz concentration, contact time and solution pH. Experimental data acquired from the equilibrium studies were well addressed by the Langmuir isotherm model. The maximum uptake capacity of 37.96 mg g-1 and 67.17 mg g-1 were estimated for KMC and KMCM. The kinetics for the adsorption of Tatz onto KMC and KMCM was best expressed by pseudo-second-order and Elovich models. The thermodynamic parameters revealed that the uptake of Tatz onto KMC and KMCM was an endothermic (ΔH: KMC = 35.0 kJ mol-1 and KMCM = 42.91 kJ mol-1), entropy-driven (ΔS: KMC = 177.6 J K-1 mol-1 and KMCM = 214.2 J K-1 mol-1) and spontaneous process. Meanwhile, KMCM demonstrated good reusability potential and superior adsorption efficiency when compared to other adsorbents.

Antibacterial and Photodegradation of Organic Dyes Using Lamiaceae-Mediated ZnO Nanoparticles: A Review.

The green synthesis of zinc oxide nanoparticles (ZnO NPs) using plant extracts has been receiving tremendous attention as an alternative to conventional physical and chemical methods. The Lamiaceae plant family is one of the largest herbal families in the world and is famous for its aromatic and polyphenolic biomolecules that can be utilised as reducing and stabilising agents during the synthesis of ZnO NPs. This review will go over the synthesis and how synthesis parameters affect the Lamiaceae-derived ZnO NPs. The Lamiaceae-mediated ZnO NPs have been utilised in a variety of applications, including photocatalysis, antimicrobial, anticancer, antioxidant, solar cells, and so on. Owing to their optical properties, ZnO NPs have emerged as potential catalysts for the photodegradation of organic dyes from wastewater. Furthermore, the low toxicity, biocompatibility, and antibacterial activity of ZnO against various bacteria have led to the application of ZnO NPs as antibacterial agents. Thus, this review will focus on the application of Lamiaceae-mediated ZnO NPs for the photodegradation of organic dyes and antibacterial applications.

A Review of the Green Synthesis of ZnO Nanoparticles Utilising Southern African Indigenous Medicinal Plants.

Metal oxide nanoparticles (NPs), such as zinc oxide (ZnO), have been researched extensively for applications in biotechnology, photovoltaics, photocatalysis, sensors, cosmetics, and pharmaceuticals due to their unique properties at the nanoscale. ZnO NPs have been fabricated using conventional physical and chemical processes, but these techniques are limited due to the use of hazardous chemicals that are bad for the environment and high energy consumption. Plant-mediated synthesis of ZnO NPs has piqued the interest of researchers owing to secondary metabolites found in plants that can reduce Zn precursors and stabilise ZnO NPs. Thus, plant-mediated synthesis of ZnO NPs has become one of the alternative green synthesis routes for the fabrication of ZnO NPs. This is attributable to its environmental friendliness, simplicity, and the potential for industrial-scale expansion. Southern Africa is home to a large and diverse indigenous medicinal plant population. However, the use of these indigenous medicinal plants for the preparation of ZnO NPs is understudied. This review looks at the indigenous medicinal plants of southern Africa that have been used to synthesise ZnO NPs for a variety of applications. In conclusion, there is a need for more exploration of southern African indigenous plants for green synthesis of ZnO NPs.

Solar Energy Materials-Evolution and Niche Applications: A Literature Review.

The demand for energy has been a global concern over the years due to the ever increasing population which still generate electricity from non-renewable energy sources. Presently, energy produced worldwide is mostly from fossil fuels, which are non-renewable sources and release harmful by-products that are greenhouses gases. The sun is considered a source of clean, renewable energy, and the most abundant. With silicon being the element most used for the direct conversion of solar energy into electrical energy, solar cells are the technology corresponding to the solution of the problem of energy on our planet. Solar cell fabrication has undergone extensive study over the past several decades and improvement from one generation to another. The first solar cells were studied and grown on silicon wafers, in particular single crystals that formed silicon-based solar cells. With the further development in thin films, dye-sensitized solar cells and organic solar cells have significantly enhanced the efficiency of the cell. The manufacturing cost and efficiency hindered further development of the cell, although consumers still have confidence in the crystalline silicon material, which enjoys a fair share in the market for photovoltaics. This present review work provides niche and prominent features including the benefits and prospects of the first (mono-poly-crystalline silicon), second (amorphous silicon and thin films), and third generation (quantum dots, dye synthesized, polymer, and perovskite) of materials evolution in photovoltaics.

Green Synthesis of Crystalline Silica from Sugarcane Bagasse Ash: Physico-Chemical Properties.

Sugarcane bagasse South Africa is an agricultural waste that poses many environmental and human health problems. Sugarcane bagasse dumps attract many insects that harm the health of the population and cause many diseases. Sugarcane ash is a naturally renewable source of silica. This study presents for the first time the extraction of nanosilica from sugar cane bagasse ash using L-cysteine hydrochloride monohydrate acid and Tetrapropylammonium Hydroxide. The structural, morphological, and chemical properties of the extracted silica nanoparticles was cross examined using XRD, FTIR, SEM, and TGA. SEM analysis presents agglomerates of irregular sizes. It is possible to observe the structure of nanosilica formed by the presence of agglomerates of irregular shapes, as well as the presence of some spherical particles distributed in the structure. XRD analysis has revealed 2θ angles at 20, 26, 36, 39, 50, and 59 which shows that each peak on the xrd pattern is indicative of certain crystalline cubic phases of nanosilica, similar to results reported in the literature by Jagadesh et al. in 2015. The crystallite size estimated by the Scherrer equation based on the aforementioned peaks for ca-silica and L-cys-silica for the extracted particles had an average diameter of 26 nm and 29 nm, respectively. Furthermore, it showed a specific surface area of 21.6511 m2/g and 116.005 m2/g for ca-silica and L-cys silica, respectively. The Infrared (IR) spectra showed peaks at 461.231 cm-1, 787.381 cm-1 and 1045.99 cm-1 which corresponds to the Si~O~Si bending vibration, the Si~O~Si stretch vibration, and the Si~O~Si stretching vibration, respectively. This confirms the successful extraction of nanosilica from sugar cane bagasse ash. TGA analysis has revealed that the as received sugarcane bagasse has high loss on ignition (LOI) of 18%, corresponding to the presence of the unburnt or partial burnt particles, similar to results reported by Yadav et al. This study has shown that sugar cane bagasse ash is a natural resource of silica which should be harnessed for industrial purposes in south Africa.

Metal Sulphides and Their Carbon Supported Composites as Platinum-Free Counter Electrodes in Dye-Sensitized Solar Cells: A Review.

Energy sufficiency is a critical requirement for the economic prosperity of modern countries. Efficient harnessing of solar energy using technologies such as the dye-sensitized solar cell could solve the energy problem which persistently plagues developing countries. Despite having a simple operational procedure and modest power conversion efficiency of 13.8%, the dye-sensitized solar cell consists of an expensive platinum counter electrode which makes commercial success futile. Thus, this review intends to establish the progress researchers have attained in the development of sulphide based counter electrodes as alternatives to platinum, thereby lowering cost of production. Metallic sulphides are good electrocatalysts and cheap, hence, they possess the necessary requirements for effective functional counter electrodes. Furthermore, ternary metallic sulphides are known to exhibit higher efficiencies stemming from the synergistic effect produced by the co-existence of two metal ions in a crystal structure, which is believed to induce greater catalytic capability. Incorporation of metallic sulphides with carbon materials, which are exceptional electrical conductors, could potentially produce more efficient counter electrodes. In that regard, this review seeks to establish the effect recently developed composite counter electrodes comprising metallic sulphides and carbon-based materials have induced on the functionality of the counter electrode (CE).

Progress on the Synthesis and Application of CuSCN Inorganic Hole Transport Material in Perovskite Solar Cells.

P-type wide bandgap semiconductor materials such as CuI, NiO, Cu2O and CuSCN are currently undergoing intense research as viable alternative hole transport materials (HTMs) to the spiro-OMeTAD in perovskite solar cells (PSCs). Despite 23.3% efficiency of PSCs, there are still a number of issues in addition to the toxicology of Pb such as instability and high-cost of the current HTM that needs to be urgently addressed. To that end, copper thiocyanate (CuSCN) HTMs in addition to robustness have high stability, high hole mobility, and suitable energy levels as compared to spiro-OMeTAD HTM. CuSCN HTM layer use affordable materials, require short synthesis routes, require simple synthetic techniques such as spin-coating and doctor-blading, thus offer a viable way of developing cost-effective PSCs. HTMs play a vital role in PSCs as they can enhance the performance of a device by reducing charge recombination processes. In this review paper, we report on the current progress of CuSCN HTMs that have been reported to date in PSCs. CuSCN HTMs have shown enhanced stability when exposed to weather elements as the solar devices retained their initial efficiency by a greater percentage. The efficiency reported to date is greater than 20% and has a potential of increasing, as well as maintaining thermal stability.

Synthesis of a novel visible light responsive γ-Fe2O3/SiO2/C-TiO2 magnetic nanocomposite for water treatment.

This work investigates the preparation of a magnetically recoverable photocatalytic nanocomposite of maghemite nanoparticles coated with silica and carbon doped titanium dioxide. The novel nanocomposite boasts the advantages of efficient photocatalytic degradation of organic pollutants in water and ease of recovery of the fine particles after water treatment. The photocatalytic nanocomposite was successfully synthesized through a stepwise approach via co-precipitation and sol-gel methods. Characterisation by Fourier transform infrared (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) substantiated the existence of the intended structure of the nanocomposite and the particles were found to be in the size range of 15-22 nm with a quasi-spherical shape. Brunauer-Emmett-Teller (BET) surface area analysis revealed an average surface area of 55.20 m2/g, which is higher than that of commercial TiO2 (Degussa P25, 50.00 m2/g), and an average pore diameter of 8.36 nm. A 5 ppm methylene blue solution was degraded with an efficiency of 96.8% after 3 h of solar irradiation, which was 19.7% greater than using the same photo-catalyst under strict UV light irradiation. Photo-catalysis using these nanoparticles was observed to be very effective. The prepared novel visible light active nanocomposite has great potential for incorporation into water treatment systems because it exhibits good stability and magnetism, as well as high photocatalytic efficiency.