Dose-response relationships of three amphotericin B formulations in a non-neutropenic murine model of invasive aspergillosis.

New lipid-associated formulations of amphotericin B (AmB) have been developed in order to reduce toxicity and enhance the efficacy of AmB by allowing administration of higher doses of the drug. We determined the in vivo dose-response relationships of 1 day and 7 day treatment of AmB, Ambisome (AmBi) and Abelcet (ABLC) in a non-neutropenic murine model of invasive aspergillosis by using survival as an endpoint. Female CD-1 mice were infected intravenously 48 h prior to start therapy with Aspergillus fumigatus (1 x 10(7) conidia/mouse). Groups of 10 mice were treated iv for 1 day or 7 days with increasing 2-fold doses of AmB, ABLC and AmBi up to a maximum of 20 mg/kg/day. Mortality was determined twice daily until day 15. Results were analyzed using product-moment survival analysis and by determining the dose response relationships on day 15. Survival at day 15 of mice with 7 day AmBi or ABLC treatment was significantly better than that of controls or AmB. The ED50s of AmBi and ABLC were 0.06 (95% CI: 0.03-0.127) mg/kg and 0.21 (0.06-0.66) mg/kg respectively. In addition, the maximum effect was higher for AmBi than ABLC, 90% survival versus 68%, respectively. Most of the effects of treatment with AmBi were reached after 1 day of treatment, indicating that the first dose given is most important in predicting survival. This study shows that AmBi and ABLC were significantly more efficacious than AmB in a non-neutropenic murine model of invasive aspergillosis, and that the effect observed was primarily dependent on the first dose administered.

A colorimetric and spectrophotometric method for in vitro susceptibility testing of Aspergillus species against caspofungin.

The in vitro susceptibility of 45 Aspergillus fumigatus, Aspergillus flavus and Aspergillus terreus isolates against caspofungin (CAS) was assessed by the CLSI reference method with spectrophotometric reading and by a colorimetric method that employed the dye MTT. Perfect agreement was found between the minimal effective concentrations (MECs) and the MIC-2 values (50% growth reduction) obtained by the MTT method. The agreement found between the MICs obtained by the CLSI and the MTT method was dependent on the MIC endpoint used, the antifungal agent tested, and the species investigated.

Efficacy and pharmacodynamics of flucytosine monotherapy in a nonneutropenic murine model of invasive aspergillosis.

The therapeutic efficacy of flucytosine (5FC) monotherapy and the pharmacodynamic index predictive of efficacy were evaluated in a nonneutropenic mouse model of acute invasive aspergillosis. Mice were infected intravenously with an Aspergillus fumigatus isolate (the median MICs of 5FC were 128 mug/ml under the standard condition, 0.5 microg/ml at pH 6.0, and 0.031 microg/ml at pH 5.0) 2 h prior to the start of therapy and were treated for 7 days with different 5FC dosing regimens. The total doses ranged from 50 to 800 mg/kg of body weight/day and were administered at 6-, 12-, and 24-h intervals. The efficacy was assessed by means of survival. The survival rates of the treatment groups ranged from 40 to 90%, while the survival rate of the control group was 20%. The efficacy found depended primarily on the total daily dose. However, the power of our sample size may have been too low to exclude an effect of dose fractionation. The pharmacodynamic index that most strongly correlated with the efficacy was the area under the serum concentration-time curve and MIC ratio (R(2) = 0.86). We conclude that 5FC monotherapy is efficacious in a murine Aspergillus fumigatus infection model.

Relationship between in vitro activities of amphotericin B and flucytosine and pH for clinical yeast and mold isolates.

In this study, we investigated the pH dependency of the in vitro activities of amphotericin B (AMB) and flucytosine (5FC) against Candida spp., Cryptococcus neoformans, Aspergillus fumigatus, Rhizopus spp., and Scedosporium prolificans in RPMI 1640 buffered with citrate buffer (pH 4.0, 5.0, 5.4, and 6.0), citrate-phosphate buffer (pH 5.4, 6.0, 6.4, and 7.0), and 3-[N-morpholino]propanesulfonic acid (MOPS) (pH 6.4, 7.0, 7.4, and 7.9). For 5FC, no significant differences were found between MICs obtained with the different buffers, while for AMB, significant differences were found. The MICs obtained with citrate-phosphate buffer were approximately 1 twofold-dilution step higher than the MICs obtained with MOPS. We demonstrated that the in vitro activities of AMB and 5FC against yeast and mold isolates were pH dependent. The in vitro activity of AMB decreased when the pH was lowered, while the in vitro activity of 5FC increased. The effect of the pH on the in vitro activities was dependent not only on the antifungal agent tested but also on the microorganism. For AMB, there was a nonlinear relationship (median r(2), 0.864) for Candida spp., C. neoformans, A. fumigatus, and Rhizopus spp. over the pH range tested. The mean MICs ranged from 0.5 to 2.52 microg/ml at pH 7.0 and from 20.16 to 32 microg/ml at pH 5.0. For S. prolificans, there was no relationship. For 5FC, there was a linear relationship for Candida spp. (median r(2), 0.767) and a nonlinear relationship for C. neoformans and A. fumigatus (median r(2), 0.882) over the pH range tested. The mean MIC values ranged from 0.125 to 1,024 microg/ml at pH 7.0 and from 0.02 to 4 microg/ml at pH 5.0. For Rhizopus spp. and S. prolificans, the relationship could not be determined, since the MIC was >1,024 microg/ml over a pH range of 4.0 to 7.9.

Effect of pH on the in vitro activities of amphotericin B, itraconazole, and flucytosine against Aspergillus isolates.

The in vitro susceptibilities of 21 Aspergillus isolates were tested against three antifungal agents in RPMI 1640 and yeast nitrogen base at pH 5.0 and 7.0 by a broth microdilution format of the NCCLS method. The MICs of amphotericin B and itraconazole were higher, while those of flucytosine were lower, at pH 5.0 than at pH 7.0. The poor correlation between in vitro results and clinical outcome could be due to a difference in pH between the in vitro susceptibility test and at the site of infection.

In vitro interactions between amphotericin B, itraconazole, and flucytosine against 21 clinical Aspergillus isolates determined by two drug interaction models.

Combination therapy of flucytosine (5FC) with other antifungal agents could be of use for the treatment of invasive aspergillosis. However, interpretation of the results of in vitro interactions is problematic. The fractional inhibitory concentration (FIC) index is the most commonly used method, but it has several major drawbacks in characterizing antifungal drug interaction. Alternatively, a response surface approach using the concentration-effect relationship over the whole concentration range instead of just the MIC can be used. We determined the in vitro interactions between amphotericin B (AMB), itraconazole, and 5FC against 21 Aspergillus isolates with a broth microdilution checkerboard method that employs the dye MTT [3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide]. FIC indices based on three different MIC endpoints (MIC-0, MIC-1, and MIC-2) and the interaction coefficient alpha were determined, the latter by estimation from the response surface approach described by Greco et al. (W. R. Greco, G. Bravo, and J. C. Parsons, Pharmacol. Rev. 47:331-385, 1995). The value obtained for the FIC index was found to be dependent on the MIC endpoint used and could be either synergistic, indifferent, or antagonistic. The response surface approach gave more consistent results. Of the three combinations tested, the AMB-5FC combination was the most potent in vitro against Aspergillus spp. We conclude that the use of the response surface approach for the interpretation of in vitro interaction studies of antifungals may be helpful in order to predict the nature and intensity of the drug interaction. However, the correlation of these results with clinical outcome remains difficult and needs to be further investigated.

In vitro interaction of flucytosine combined with amphotericin B or fluconazole against thirty-five yeast isolates determined by both the fractional inhibitory concentration index and the response surface approach.

Combination therapy could be of benefit for the treatment of invasive yeast infections. However, in vitro interaction studies are relatively scarce and the interpretation of the fractional inhibitory concentration (FIC) index can be contradictory due to various definitions used; not all information on the interaction study is used in the index, and different MIC end points exist for different classes of drugs. Fitting an interaction model to the whole response surface and estimation of an interaction coefficient alpha (IC(alpha)) would overcome these objections and has the additional advantage that confidence intervals of the interaction are obtained. The efficacy of flucytosine (5FC) in combination with amphotericin B (AB) and fluconazole (FCZ) was studied against 35 yeast isolates in triplicate (Candida albicans [n = 9], Candida glabrata [n = 9], Candida krusei [n = 9], and Cryptococcus neoformans [n = 8]) using a broth microdilution checkerboard method and measuring growth after 48 h by a spectrophotometer. The FIC index and IC(alpha) were determined, the latter by estimation from the response surface approach described by Greco et al. (W. R. Greco, G. Bravo, and J. C. Parsons, Pharmacol. Rev. 47:331-385, 1995) by using a computer program developed for that purpose. For the 5FC-FCZ combination, the interactions determined by the IC(alpha) generally were in concordance with the interactions determined by the FIC index, but large discrepancies were found between both methods for the 5FC-AB combination. These could mainly be explained by shortcomings in the FIC approach. The in vitro interaction of 5FC-AB demonstrated variable results depending on the tested Candida isolate. In general, the 5FC-FCZ combination was antagonistic against Candida species, but for some Candida isolates synergism was found. For C. neoformans the interaction for both combinations was highly dependent on the tested isolate and the method used. Response surface approach is an alternative method for determining the interaction between antifungal agents. By using this approach, some of the problems encountered with the FIC were overcome.

Comparison of fractional inhibitory concentration index with response surface modeling for characterization of in vitro interaction of antifungals against itraconazole-susceptible and -resistant Aspergillus fumigatus isolates.

Although the fractional inhibitory concentration (FIC) index is most frequently used to define or to describe drug interactions, it has some important disadvantages when used for drugs against filamentous fungi. This includes observer bias in the determination of the MIC and no agreement on the endpoints (MIC-0, MIC-1, or MIC-2 [> or = 95, > or = 75, and > or = 50% growth inhibition, respectively]) when studying drug combinations. Furthermore, statistical analysis and comparisons are troublesome. The use of a spectrophotometric method to determine the effect of drug combinations yields quantitative data and permits the use of model fits to the whole response surface. We applied the response surface model described by Greco et al. (W. R. Greco, G. Bravo, and J. C. Parsons, Pharmacol. Rev. 47:331-385, 1995) to determine the interaction coefficient alpha (ICalpha) using a program developed for that purpose and compared the results with FIC indices. The susceptibilities of amphotericin B (AM), itraconazole (IT), and terbinafine (TB) were tested either alone or in combination against 10 IT-susceptible (IT-S) and 5 IT-resistant (IT-R) clinical strains of Aspergillus fumigatus using a modified checkerboard microdilution method that employs the dye MTT [3-(4,5-dimethyl-2-thiazyl)2,5-diphenyl-2H-tetrazolium bromide]. Growth in each well was determined by a spectrophotometer. FIC indices were determined and ICalpha values were estimated for each organism strain combination, and the latter included error estimates. Depending on the MIC endpoint used, the FIC index ranged from 1.016 to 2.077 for AM-IT, from 0.544 to 1.767 for AM-TB, and from 0.656 to 0.740 for IT-TB for the IT-S strains. For the IT-R strains the FIC index ranged from 0.308 to 1.767 for AM-IT, from 0.512 to 1.646 for AM-TB, and from 0.403 to 0.497 for IT-TB. The results indicate that the degree of interaction is not only determined by the agents themselves but also by the choice of the endpoint. Estimates of the ICalpha values showed more consistent results. Although the absolute FIC indices were difficult to interpret, there was a good correlation with the results obtained using the ICalpha values. The combination of AM with either IT or TB was antagonistic in vitro, whereas the combination of IT and TB was synergistic in vitro for both IT-S and IT-R strains. The use of response surface modeling to determine the interaction of drugs against filamentous fungi is promising, and more consistent results are obtained by this method than by using FIC indices.