RESUMEN
Chitosan, a cationic natural polysaccharide derived from the deacetylation of chitin, is known for its solubility in diluted acidic solutions, biodegradability, biocompatibility, and nontoxicity. This study introduces three innovative methods for preparing various types of porous chitosan beads: solvent extraction, surfactant extraction, and substance decomposition. These methods involve the integration and subsequent extraction or decomposition of materials during the synthesis process, eliminating the need for additional steps. We used state-of-the-art characterization techniques to analyze and evaluate the chemical and physical properties of the beads, such as Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and three-dimensional (3D) computed tomography (CT) scanning. The 3D CT scans visualized and measured the porosity of different bead types, ranging from 68.4% to 39.3%. This study also evaluated the mechanical properties of the particle beads under compressive forces in both wet and dry conditions, highlighting the influence of porosity on their mechanical integrity and compression pressure behavior. The adsorptive properties of these chitosan beads were studied using methylene blue as a model pollutant, emphasizing the importance of balancing porous structure, surface area, kinetics, and structural integrity. This study paves the way for the development of environmentally sustainable polymeric beads, highlighting the crucial need to balance porosity, surface area, and structural integrity to optimize their effectiveness in real-world applications.
RESUMEN
Per- and polyfluoroalkyl substances (PFAS) constitute a large class of toxic manmade compounds that have been used in many industrial and household products. Dispersion of PFAS in the environment has raised concerns because of their persistence and toxicity for living organisms. Both terrestrial and aquatic plants have been shown to take up PFAS from contaminated soil and groundwater, and to accumulate these compounds inside their tissues. Although PFAS generally exert a low toxicity on plants at environmentally relevant concentrations, they frequently impact biomass growth and photosynthetic activity at higher levels. Uptake, translocation, and toxicity of PFAS in plants have been well covered in literature. Although less attention has been given to the molecular mechanisms underlying the plant response to PFAS, recent studies based on -omics approaches indicate that PFAS affects the plant metabolism even a low concentration. The objective of this review is to summarize the current knowledge about the effects of PFAS on plants at the molecular level. Results from recent transcriptomics, proteomics, and metabolomics studies show that low levels of PFAS induce oxidative stress and affect multiple plant functions and processes, including photosynthesis and energy metabolism. These potentially harmful effects trigger activation of defense mechanisms.
Although the uptake, translocation, and toxicity of per- and polyfluoroalkyl substances (PFAS) in plants have been well covered in literature, less attention has been given to the molecular mechanisms underlying the plant response to PFAS. Using results from recent transcriptomics, proteomics, and metabolomics studies, this review article aims to summarize the current knowledge about the effects of PFAS on plants at the molecular level. Several reviews have been published on the effects of PFAS on plants, however, none have focused specifically on the molecular mechanisms of PFAS phytotoxicity.
Asunto(s)
Fluorocarburos , Agua Subterránea , Biodegradación Ambiental , Transporte Biológico , Biomasa , Fluorocarburos/toxicidadRESUMEN
Nano-enhanced dialytic fluid purification is an evolution of biomedical dialysis that has been proposed as a novel method for applying nanomaterials in water treatment. Using nanosized hexagonal birnessite (δ-MnO2) in a simplified dialytic system, we demonstrate herein an almost complete removal (98%) of Pb(II) within 3 h of treatment while monitoring environmental variables pH and Eh (redox potential). A mathematical model of the purification process is constructed in COMSOL Multiphysics to demonstrate how nanoadsorption using free-flowing nanoparticles in a dialytic system can be studied theoretically using computational fluid dynamics (CFD). The CFD model closely agrees with experimental results, estimating a 95% removal over 3 h of treatment and suggesting an 18% consumption of available adsorbent capacity. Additional insights into the progress and mechanisms of the adsorption process are also revealed. Finally, the nanoenhanced model is compared against standard dialysis absent of nanomaterials using COMSOL, and key differences in removal efficiency are highlighted. Results indicate that nanoenhanced dialysis can attain almost complete removal in 3 h of treatment or reach the same removal goal as standard dialysis in less than two-third of the treatment time.
RESUMEN
The use of nanomaterials has transformed fields such as medicine and electronics. However, aggregation of nanomaterials in aqueous solutions, difficult recovery of spent nano-adsorbents from reactors, and a tremendous pressure loss caused by nano-adsorbents in adsorption columns have prevented the wide-scale use of nano-adsorbents in industrial applications for water purification. An over-reliance on traditional adsorption media for fluid purification practices has slowed innovation in this field. This study serves as a proof of concept for a new approach in utilizing nano-adsorbents in water treatment. A system based on the concept of renal dialysis was used to treat a solution of arsenite using two-line ferrihydrite (Fh) under environmental conditions. The performance was compared to traditional batch studies, and environmental variables pH and Eh were monitored. The system removed 67 and 91% of arsenite at 1.22 and 2.61 g/L Fh loadings, respectively, in comparison to batch experiments that removed 82 and 94% for similar loadings. Operational conditions and the physical design of the vessel limited the extent of removal that could be obtained with the system. Design advantages, shortcomings, and required improvements are discussed.
RESUMEN
Predicting waste disposal of a given municipality could be complicated and expensive for government agencies. Lack of a uniform modeling approach, the gap between the scientific community and the government, inaccessibility to the forecasts of variables used in the waste management literature, and budget deficiencies could all result in over-simplification and possibly employing inaccurate modeling approaches for decision makers. This paper portrays the trend of Total Solid Waste (TSW) and Municipal Solid Waste (MSW) disposal of Philadelphia (Pennsylvania, US) with respect to the rate of population change, unemployment rate change, and the current recycling policies. The objective is to develop satisfactory predictive models for the TSW disposal using the same number of variables as currently used by the City of Philadelphia. It is crucial to include an economic factor such as unemployment rate in modeling the waste disposal, especially during economic downturns when economic factors can dominate the effects of population change on waste generation and therefore disposal. Two predictive models are developed using time series analysis and stationary multiple linear regression. The stationary multiple linear regression model yields more accurate predictions for both TSW and MSW disposal of Philadelphia with an approximate level of 8.8% Root Mean Square Percentage Error (RMSPE) and R2 of 0.7. Even the VAR model, with RMSE of 0.15 million tons (RMSPEâ¯=â¯10.7%), provides better estiamtions than does the City of Philadelphia's current working model.
Asunto(s)
Eliminación de Residuos , Administración de Residuos , Ciudades , Philadelphia , Residuos Sólidos , DesempleoRESUMEN
Hydroxylated polychlorinated biphenyls (OH-PCBs) are toxic contaminants produced by biotic or abiotic transformation of PCBs. In this study, we have tested the toxicity of 2,5-dichlorobiphenyl (2,5-DCB) and three of its OH-derivatives, 2'-OH-, 3'-OH-, and 4'-OH-2,5-DCB toward the model plant, Arabidopsis thaliana. Toxicity tests showed that the parent 2,5-DCB (5 mg L-1) had little effect on the plants, while all three OH-metabolites (5 mg L-1) exhibited a significant toxicity, with 4'-OH-2,5-DCB being the most potent (inhibition concentration 50%-IC50 in germination tests = 9.8 mg L-1 for 2'-OH-2,5-DCB, 9.5 mg L-1 for 3'-OH-2,5-DCB, and 4.8 mg L-1 for 4'-OH-2,5-DCB). Whole-genome expression microarrays (Affymetrix) showed that exposure to the three OH-PCBs resulted in rather similar expression patterns, which were distinct from the one developing in response to 2,5-DCB. Searching an Arabidopsis microarray database (Genevestigator) revealed that, unlike the parent compound, the three OH-derivatives induced expression profiles similar to inhibitors of brassinosteroid synthesis (i.e., brassinazole, propiconazole, and uniconazole), resulting in severe iron deficiency in exposed plants. Our results suggest that the higher phytotoxicity of OH-derivatives as compared to 2,5-DCB is at least partly explained by the inhibition of the brassinosteroid pathway.
Asunto(s)
Arabidopsis , Contaminantes Ambientales , Bifenilos Policlorados , Biodegradación Ambiental , Hidroxilación , TranscriptomaRESUMEN
Hydroxylated polychlorinated biphenyls (HO-PCBs) are toxic contaminants which are produced in the environment by biological or abiotic oxidation of PCBs. The toxicity of a suite of 23 mono-hydroxylated derivatives of PCBs and 12 parent PCBs was determined using the bacterial bioluminescent assay Microtox(®). All HO-PCBs tested exhibited higher toxicity than the corresponding parent PCB, with effect concentration 50 % (EC50) ranging from 0.07 to 133 mg L(-1). The highest toxicities were recorded with 4-hydroxylated derivatives of di-chlorinated biphenyls (EC50 = 0.07-0.36 mg L(-1)) and 2-hydroxylated derivatives of tri-chlorinated biphenyls carrying a chlorine substituent on the phenolic ring (EC50 = 0.34-0.48 mg L(-1)). The toxicity of HO-PCBs generally decreased when the degree of chlorination increased. Consistently with this observation, a significant positive correlation was measured between toxicity (measured by EC50) and octanol-water partition coefficient (pK ow) for the HO-PCBs under study (Pearson's correlation coefficient, r = 0.74), which may be explained by the lower solubility and bioavailability generally associated with higher hydrophobicity. This study is the first one which assessed the toxicity of a suite of PCBs and HO-PCBs using the bioluminescent assay Microtox(®), showing an inverse correlation between toxicity and hydrophobicity.
Asunto(s)
Contaminantes Ambientales/toxicidad , Mediciones Luminiscentes , Bifenilos Policlorados/toxicidad , Pruebas de Toxicidad/métodosRESUMEN
Hydroxylated polychlorinated biphenyls (OH-PCBs) are produced in the environment by the oxidation of PCBs through a variety of mechanisms, including metabolic transformation in living organisms and abiotic reactions with hydroxyl radicals. As a consequence, OH-PCBs have been detected in a wide range of environmental samples, including animal tissues, water, and sediments. OH-PCBs have recently raised serious environmental concerns because they exert a variety of toxic effects at lower doses than the parent PCBs and they are disruptors of the endocrine system. Although evidence about the widespread dispersion of OH-PCBs in various compartments of the ecosystem has accumulated, little is currently known about their biodegradation and behavior in the environment. OH-PCBs are, today, increasingly considered as a new class of environmental contaminants that possess specific chemical, physical, and biological properties not shared with the parent PCBs. This article reviews recent findings regarding the sources, fate, and toxicities of OH-PCBs in the environment.
Asunto(s)
Contaminantes Ambientales/análisis , Contaminación Ambiental/análisis , Bifenilos Policlorados/análisis , Animales , Biodegradación Ambiental , Ambiente , Contaminantes Ambientales/toxicidad , Contaminación Ambiental/estadística & datos numéricos , Hidroxilación , Oxidación-Reducción , Bifenilos Policlorados/toxicidadRESUMEN
The polychlorinated biphenyl (PCB)-degrading bacterium, Burkholderia xenovorans LB400, was capable of transforming three hydroxylated derivatives of 2,5-dichlorobiphenyl (2,5-DCB) (2'-hydroxy- (2'-OH-), 3'-OH-, and 4'-OH-2,5-DCB) when biphenyl was used as the carbon source (i.e., biphenyl pathway-inducing condition), although only 2'-OH-2,5-DCB was transformed when the bacterium was growing on succinate (i.e., condition non-inductive of the biphenyl pathway). On the contrary, hydroyxlated derivatives of 2,4,6-trichlorobiphenyl (2,4,6-TCB) (2'-OH-, 3'-OH-, and 4'-OH-2,4,6-TCB) were not significantly transformed by B. xenovorans LB400, regardless of the carbon source used. Gene expression analyses showed a clear correlation between the transformation of OH-2,5-DCBs and expression of genes of the biphenyl pathway. The PCB metabolite, 2,5-dichlorobenzoic acid (2,5-DCBA), was produced following the transformation of OH-2,5-DCBs. 2,5-DCBA was not further transformed by B. xenovorans LB400. The present study is significant because it provides evidence that PCB-degrading bacteria are capable of transforming hydroxylated derivatives of PCBs, which are increasingly considered as a new class of environmental contaminants.
Asunto(s)
Biotransformación , Burkholderia/metabolismo , Clorobenzoatos/metabolismo , Contaminantes Ambientales/metabolismo , Bifenilos Policlorados/metabolismo , HidroxilaciónRESUMEN
The release of silver nanoparticles (AgNPs) in the environment has raised concerns about their effects on living organisms, including plants. In this study, changes in gene expression in Arabidopsis thaliana exposed to polyvinylpyrrolidone-coated AgNPs and silver ions (Ag(+)) were analyzed using Affymetrix expression microarrays. Exposure to 5 mg/L AgNPs (20 nm) for 10 days resulted in upregulation of 286 genes and downregulation of 81 genes by reference to nonexposed plants. Exposure to 5 mg/L Ag(+) for 10 days resulted in upregulation of 84 genes and downregulation of 53 genes by reference to nonexposed plants. Many genes differentially expressed by AgNPs and Ag(+) were found to be involved in the response of plants to various stresses: upregulated genes were primarily associated with the response to metals and oxidative stress (e.g., vacuolar cation/proton exchanger, superoxide dismutase, cytochrome P450-dependent oxidase, and peroxidase), while downregulated genes were more associated with response to pathogens and hormonal stimuli [e.g., auxin-regulated gene involved in organ size (ARGOS), ethylene signaling pathway, and systemic acquired resistance (SAR) against fungi and bacteria]. A significant overlap was observed between genes differentially expressed in response to AgNPs and Ag(+) (13 and 21% of total up- and downregulated genes, respectively), suggesting that AgNP-induced stress originates partly from silver toxicity and partly from nanoparticle-specific effects. Three highly upregulated genes in the presence of AgNPs, but not Ag(+), belong to the thalianol biosynthetic pathway, which is thought to be involved in the plant defense system. Results from this study provide insights into the molecular mechanisms of the response of plants to AgNPs and Ag(+).
Asunto(s)
Arabidopsis/efectos de los fármacos , Regulación de la Expresión Génica de las Plantas/efectos de los fármacos , Nanopartículas del Metal/toxicidad , Plata/toxicidad , Arabidopsis/genética , Arabidopsis/crecimiento & desarrollo , Biomasa , Perfilación de la Expresión Génica , Análisis de Secuencia por Matrices de OligonucleótidosRESUMEN
Three hydroxylated derivatives of PCBs, 2'-hydroxy-4-chlorobiphenyl (2'-OH-4-CB), 3'-hydroxy-4-chlorobiphenyl (3'-OH-4-CB), and 4'-hydroxy-4-chlorobiphenyl (4'-OH-4-CB), were transformed by the PCB degrader, Burkholderia xenovorans. When the bacterium was growing on biphenyl (biphenyl pathway-inducing conditions), all three hydroxylated isomers were transformed. However, only 2'-OH-4-CB was transformed by the bacterium growing on succinate (conditions non-inductive of the biphenyl pathway). Gene expression analyses showed a strong induction of key genes of the biphenyl pathway (bph) when cells were grown on biphenyl, which is consistent with the transformation of the three isomers by biphenyl-grown cells. When cells were grown on succinate, only exposure to 2'-OH-4-CB resulted in expression of biphenyl pathway genes, which suggests that this isomer was capable of inducing the biphenyl pathway. These results provide the first evidence that bacteria are able to metabolize PCB derivatives hydroxylated on the non-chlorinated ring.