TiO2 nanotubes as an antibacterial nanotextured surface for dental implants: Systematic review and meta-analysis.

OBJECTIVES: Nanotechnology is constantly advancing in dental science, progressing several features aimed at improving dental implants. An alternative for surface treatment of dental implants is electrochemical anodization, which may generate a nanotubular surface (TiO2 nanotubes) with antibacterial potential and osteoinductive features. This systematic review and meta-analysis aims to elucidate the possible antibacterial properties of the surface in question compared to the untreated titanium surface. SOURCES: For that purpose, was performed a systematic search on the bases PubMed, Lilacs, Embase, Web Of Science, Cinahl, and Cochrane Central, as well as, manual searches and gray literature. STUDY SELECTION: The searches resulted in 742 articles, of which 156 followed for full-text reading. Then, 37 were included in the systematic review and 8 were included in meta-analysis. RESULTS: Fifteen studies revealed significant antibacterial protection using TiO2 nanotube surfaces, while 15 studies found no statistical difference between control and nanotextured surfaces. Meta-analysis of in vitro studies demonstrated relevant bacterial reduction only for studies investigating Staphylococcus aureus in a period of 6 h. Meta-analysis of in vivo studies revealed three times lower bacterial adhesion and proliferation on TiO2 nanotube surfaces. CONCLUSIONS: TiO2 nanotube topography as a surface for dental implants in preclinical research has demonstrated a positive relationship with antibacterial properties, nevertheless, factors such as anodization protocols, bacteria strains, and mono-culture methods should be taken into consideration, consequently, further studies are necessary to promote clinical translatability.

Nano-scaled surfaces and sustainable-antibiotic-release from polymeric coating for application on intra-osseous implants and trans-mucosal abutments.

Multifunctional surfaces may display the potential to accelerate and promote the healing process around dental implants. However, the initial cellular biocompatibility, molecular activity, and the release of functionalized molecules from these novel surfaces require extensive investigation for clinical use. Aiming to develop and compare innovative surfaces for application in dental implants, the present study utilized titanium disks, which were treated and divided into four groups: machined (Macro); acid-etched (Micro); anodized-hydrophilic surface (TNTs); and anodized surface coated with a rifampicin-loaded polymeric layer (poly(lactide-co-glycolide), PLGA) (TNTsRIMP). The samples were characterized regarding their physicochemical properties and the cumulative release of rifampicin (RIMP), investigated at different pH values. Additionally, differentiated osteoblasts from mesenchymal cells were used for cell viability and qRT-PCR analysis. Antibacterial properties of each surface treatment were investigated against Staphylococcus epidermidis. TNTsRIMP demonstrated controlled drug release for up to 7 days in neutral pH environments. Osteogenic cell cultures indicated that all the evaluated surfaces showed biocompatibility. The TNTs group revealed up-regulated values for bone-related gene quantification in 7 days, followed by the TNTsRIMP group. Furthermore, the antibiotic-functionalized surface revealed effectiveness to inhibit S. epidermidis and stimulate promising conditions for osteogenic cell behavior. Characteristics such as nanomorphology and hydrophilicity were determinants for the up-regulated quantification of osteogenic biomarkers related to early bone maturation, encouraging application in intra-osseous implant surfaces; in addition, antibiotic-functionalized surfaces demonstrated significant higher antibacterial properties compared to the other groups. Our findings suggest that polymeric-antibiotic-loaded coating might be applied for the prevention of early infections, favoring its application in multifunctional surfaces for intra- and/or trans-mucosal components of dental implants, while, hydrophilic nanotextured surfaces promoted optimistic properties to stimulate early bone-related cell responses, favoring its application in bone-anchored surfaces.

Superhydrophilic Nanotextured Surfaces for Dental Implants: Influence of Early Saliva Contamination and Wet Storage.

Hydrophilic and nanotextured surfaces for dental implants have been reported as relevant properties for early osseointegration. However, these surface characteristics are quite sensitive to oral interactions. Therefore, this pilot study aimed to investigate the superficial alterations caused on hydrophilic nanotubular surfaces after early human saliva interaction. Titanium disks were treated using an anodization protocol followed by reactive plasma application in order to achieve nanotopography and hydrophilicity, additionally; surfaces were stored in normal atmospheric oxygen or wet conditioning. Following, samples were interacted with saliva for 10 min and analyzed regarding physical-chemical properties and cellular viability. Saliva interaction did not show any significant influence on morphological characteristics, roughness measurements and chemical composition; however, hydrophilicity was statistically altered compromising this feature when the samples were stored in common air. Cellular viability tested with pre-osteoblasts cell line (MC3T3-E1) reduced significantly at 48 h on the samples without wet storage after saliva contamination. The applied wet-storage methodology appears to be effective in maintaining properties such as hydrophilicity during saliva interaction. In conclusion, saliva contamination might impair important properties of hydrophilic nanotubular surfaces when not stored in wet conditions, suggesting the need of saliva-controlled sites for oral application of hydrophilic surfaces and/or the use of modified-package methods associated with their wet storage.

Influence of saliva interaction on surface properties manufactured for rapid osseointegration in dental implants.

Surface treatments are designed to promote modified implant surfaces with positive interactions with the surrounding living tissues. However, the inadvertent early contact of these surfaces with oral fluids during surgery may lead to undesired conditions affecting osseointegration. This study aimed to investigate the possible alterations in the physico-chemical properties of modified-surfaces caused by early saliva exposure. Titanium (Ti) surfaces were exposed to three different samples of human saliva and later analyzed for protein adhesion, physico-chemical surface alterations, and osteogenic cell-viability. The results indicated that surface roughness was the most significant factor influencing saliva protein adsorption; moreover, hydrophilic surfaces had critically lost their characteristics after contact with saliva. Decreased cell viability was observed in cultures after contact with saliva. Early contact with saliva might negatively influence modified surface properties and local cell viability. Careful surgical insertion of implants with hydrophilic surfaces is recommended, particularly in sites where saliva interaction is prone to occur.

Extension of hydrophilicity stability by reactive plasma treatment and wet storage on TiO2 nanotube surfaces for biomedical implant applications.

Micro and nanoscale changes allow the optimization of physico-chemical properties of titanium implant surfaces. Recently UV and plasma treatments have allowed surface hydrophilicity to take increased prominence; however, this beneficial effect is short-lived. The aim of this study is to investigate methodologies post-anodizing treatment to generate and maintain high surface hydrophilicity along with high biocompatibility. Anodized surfaces were characterized regarding physical-chemical properties. Then, surface wettability with nanomorphology was evaluated at different times and with distinct post-treatments: as deposited, with a reactive plasma and UV-light post-treatment, stored in air or deionized (DI) water. Adhesion, alkaline phosphatase (ALP) activity and bone cell viability tests were executed after the incremental treatments. The anodizing process generated a surface with TiO2 nanotubes morphology and micro-roughness. Plasma-treated surfaces resulted in the most hydrophilic samples and this property was maintained for a longer period when those were stored in DI water (angle variation of 7° to 12° in 21 days). Furthermore, plasma post-treatment changed the titanium surface crystalline phase from amorphous to anatase. Anodized surfaces modified by reactive plasma and stored in DI water suggest better hydrophilicity stability, biocompatibility, ALP activity and achievement of crystalline phase alteration, indicating future potential use on biomedical implants.

Implant Inclination and Cantilever Length Are Not Associated with Bone Loss in Fixed Complete Dentures: A Prospective Study.

PURPOSE: To investigate whether the inclination of the most distal implant and the cantilever length influence marginal bone loss in implant-supported fixed complete dentures (ISFCDs). MATERIALS AND METHODS: A novel method using computed tomography images was developed to measure the mesiodistal implant inclination. The cantilever length was measured during ISFCD fabrication. Radiographs were obtained after ISFCD installation at 1 and 3 years after loading. RESULTS: A total of 30 subjects with 62 implants were included. Accumulated marginal bone loss was 0.35 ± 0.49 mm. No significant association was found between marginal bone loss and cantilever length or implant inclination. CONCLUSION: Implant inclination and cantilever length do not seem to affect marginal bone loss.

Risk factor model of mechanical complications in implant-supported fixed complete dentures: A prospective cohort study.

OBJECTIVES: This prospective cohort study estimated the effect of technical and clinical factors on mechanical complications in implant-supported fixed complete dentures (IFCDs). The patient's perception of the impact of oral rehabilitation on quality of life was assessed. MATERIAL AND METHODS: A non-probabilistic sample consisted of 88 consecutive patients treated with 94 screw-retained, metal-acrylic IFCDs. Data collection included sociodemographic variables, presence and intensity of bruxism, maximal occlusal force, opposing arch, design of the metallic framework, distribution of occlusal contacts, and quality of life (OHIP-14). IFCD-level data were analyzed using Kaplan-Meier survival analysis and Cox regression model. Quality of life data were analyzed by paired Student t test. RESULTS: During a mean follow-up of 35.1 ± 18.3 months, 16/94 IFCDs (17%) had repairable mechanical complications because of loosening/fracture of artificial teeth (n = 15) and screw loosening (n = 1). Framework design (retention pins <4 mm) was a significant risk factor for complications (HR = 11.038; p = 0.027) when adjusted for sex. Mechanical complications were not associated with sex, body mass index, thickness of the acrylic resin veneering, type of opposing arch, distribution of occlusal contacts and force, protrusion interference, presence/intensity of bruxism or maximal occlusal force. OHIP-14 total scores decreased after IFCD treatment for both patients with or without complications. CONCLUSIONS: Within the limitations of this study, the results suggest that clinical success is associated to framework design with retention pins equal or longer than 4 mm. Quality of life improved with IFCD treatment, even in patients with mechanical complications.

Primary and Secondary Stability of Single Short Implants.

PURPOSE: This prospective cohort study assessed the effect of bone quality on the primary and secondary stability of single short implants placed in the posterior region. MATERIALS AND METHODS: A total of 39 short implants (4.1 × 6-mm long) were placed in the posterior region of the maxilla or mandible in 18 patients. Bone quality was classified into type I, II, III, or IV as assessed intrasurgically. Primary implant stability was measured with insertion torque, damping capacity (PTV values), and resonance frequency analysis (ISQ values). Secondary stability was measured by ISQ and PTV at abutment installation. Data were analyzed by using repeated-measures ANOVA and Tukey's test, Kruskall-Wallis test, and Spearman correlation tests. RESULTS: Implants placed in bone type IV had significant lower insertion torque and ISQ values as well as higher PTV values than in bone types I to II (P < 0.05). The mean ISQ values were higher at abutment installation than at implant placement (P < 0.05), regardless the bone type. The assessment methods of implant stability showed a moderate correlation. CONCLUSIONS: Bone quality influences both the primary and secondary stability of single short implants in the posterior region.

Marginal Bone Loss in Implants Placed in the Maxillary Sinus Grafted With Anorganic Bovine Bone: A Prospective Clinical and Radiographic Study.

BACKGROUND: Sinus elevation is a reliable and often-used technique. Success of implants placed in such situations, even with bone substitutes alone, prompted the authors of this study to strive for bone loss close to zero and research variables that cause higher or lower rates of resorption. The objective of this study is to evaluate survival rates and marginal bone loss (MBL) around implants placed in sites treated with maxillary sinus augmentation using anorganic bovine bone (ABB), and identify surgical and prosthetic prognostic variables. METHODS: Fifty-five implants were placed in 30 grafted maxillary sinuses in 24 patients. Periapical radiographs were evaluated immediately after implant placement (baseline), 6 months, and at the most recent follow-up. MBL was calculated from the difference between initial and final measurements, taking into account a distortion rate for each radiograph compared with original implant measurements. RESULTS: Survival rate was 98.2%, with only one implant lost (100% survival rate after loading) over a mean follow-up time of 2.0 ± 0.9 years. MBL ranged from 0 to 2.85 mm: 75.9% of mesial sites and 83.4% of distal sites showed <1 mm of MBL, whereas 35.2% of mesial sites and 37% of distal sites exhibited no bone loss. MBL was significantly (P <0.05) greater in open-flap compared with flapless surgery. CONCLUSIONS: Within the limitations of the present study, it was concluded that maxillary sinus elevation with 100% ABB gives predictable results, and that flapless surgery results in less MBL compared with traditional open-flap surgery.

Effects of the bite splint 15-day treatment termination in patients with temporomandibular disorder with a clinical history of sleep bruxism: a longitudinal single-cohort study.

OBJECTIVE: The aim of this study was to assess the effects of bite splint (BS) treatment termination in patients treated for temporomandibular disorder (TMD) and sleep bruxism (SB). STUDY DESIGN: This longitudinal single-cohort study assessed 30 patients (29.5 ± 7.8 years old, 86.7% women) who were successfully treated with BS for SB and TMD for 30 days to 6 months prior to termination of the use of BS. The Research Diagnostic Criteria for TMD Axes I and II, Sleep Assessment Questionnaire, Beck Depression Inventory, and BiteStrip were used to assess TMD signs and symptoms, sleep disorders, depression, and SB at baseline and after 15 days of BS disuse. RESULTS: TMD symptoms, including the disability points, characteristic pain intensity, and present pain at rest, increased significantly (P < 0.05). After 15 days of BS termination, there were no significant differences in SB and depression levels, sleep quality, and TMD signs. CONCLUSIONS: In patients with TMD and SB, BS treatment cessation is not recommended.

Comparative evaluation of bone regeneration using spherical and irregularly shaped granules of interconnected porous hydroxylapatite. A beagle dog study.

PURPOSE: Bone regeneration stimulated by two different shapes of interconnected porous calcium hydroxyapatite (IP-CHA) granules was evaluated in the mandibles of 3 beagle dogs. METHODS: Deferent shapes of IP-CHA were used, spherical (spherical shaped IP-CHA granules) and irregular shapes (irregularly shaped IP-CHA granules). Two bone sockets (3mm in diameter and 5mm in depth) were prepared in the right edentulous mandible of each animal where right premolars had been extracted and sites healed for 3 months. The two types of IP-CHA were filled into the sockets to stimulate bone regeneration. New bone formation was evaluated histologically at 4, 8 and 12 weeks after filling. RESULTS: At 4 weeks, little bone formation was apparent in any of the bony sockets. At 8 weeks, newly formed bone was detected between the granules but not in the pores. In contrast, at 12 weeks, bone formation was clearly observed not only between the granules but also inside the granule pores. Comparing the two sites at 8 and 12 weeks, more bone formation was detected in sites receiving irregularly shaped IP-CHA than in sites receiving spherical IP-CHA. CONCLUSION: These results indicate that use of irregularly shaped IP-CHA may enhance bone regeneration. The results of this preliminary study suggest that irregularly shaped IP-CHA granules may have more possible usefulness than spherically shaped granules as a scaffold for bone regeneration.

Analysis of the influence of a mandibular advancement device on sleep and sleep bruxism scores by means of the BiteStrip and the Sleep Assessment Questionnaire.

PURPOSE: A before-and-after experimental clinical study was carried out with the objective of evaluating the effect of a mandibular advancement device (MAD; 75% advancement), made of a thermoplastic material, on sleep bruxism (SB) and sleep scores. MATERIALS AND METHODS: After a habituation period of 1 week, SB scores were taken at baseline and after use of the MAD for 30 days. Scores were compared using the newly developed BiteStrip, which registers the number of contractions of the unilateral masseter muscle after a 5-hour period, giving a severity score from 0 to 3 after the registrations. To assess sleep, the Sleep Assessment Questionnaire (SAQ), a screening tool with scores ranging from 0 to 68, was used before and after use of the MAD. Twenty-eight subjects (13 women, 15 men; mean age: 42.9 +/- 12.0 years) with a clinical history of SB and no spontaneous temporomandibular disorder (TMD) pain were selected. The clinical diagnosis of either moderate or severe SB was further confirmed through use of the BiteStrip (scores 2 or 3) at baseline. A 30-day follow-up period was used for evaluation. Both methods were validated against polysomnography. In addition, common signs and symptoms of TMD based on the Research Diagnostic Criteria for Temporomandibular Disorders were also evaluated before and after use to assess the side effects of the MAD. RESULTS: There was a statistically significant improvement in both SB and sleep scores based on the BiteStrip and the SAQ (Wilcoxon signed rank and Student paired t test, P < .05). In the signs and symptoms of TMD, there was a significant reduction in temporomandibular joint sounds as well as in masseter and temporalis tenderness to palpation. None of the SB subjects experienced any breakage of the MAD. CONCLUSION: The MAD had a positive effect on SB and sleep scores, measured by the BiteStrip and the SAQ, respectively, and did not increase any traditional signs and symptoms of TMD in a 30-day evaluation period.

Evaluation of the accuracy of 3 transfer techniques for implant-supported prostheses with multiple abutments.

PURPOSE: This study evaluated the deformation of a metallic framework connected to 15 stone casts fabricated using 3 transfer techniques to determine the most accurate impression procedure. MATERIALS AND METHODS: Five stone casts were made from polyether impressions of an epoxy resin master model for each transfer technique. Group 1 samples were created by the direct splinted technique (square transfer copings splinted with carbon steel pins and autopolymerizing acrylic resin, custom tray); group 2 samples were made by the direct nonsplinted technique (square transfer copings, custom tray); and group 3 samples were fabricated using the indirect technique (tapered transfer copings, custom tray). Sixteen strain gauges were fixed on the framework to measure the degree of framework deformation for each stone cast. Pairs of strain gauges placed opposite each other constituted 1 channel to read deformation (half Wheatstone bridge). Deformation readings were collected at the 4 segments between abutments in 4 directions (anterior, posterior, superior, and inferior). Deformation data were analyzed using analysis of variance and the Tukey test at the .05 and .01 levels of significance. RESULTS: Group 1 samples allowed the most accurate reproduction of analog position compared to the samples made using the other techniques. No significant difference was found between the direct nonsplinted (group 2) and indirect (group 3) techniques. DISCUSSION: Although some studies have evaluated transfer techniques with similar methodology, this study demonstrated the most suitable strain gauge setup to record framework deformations in all directions and simultaneously offset the effects of temperature variation. CONCLUSIONS: The direct splinted technique was the most accurate transfer method for multiple abutments compared to direct nonsplinted and indirect techniques.