Assessment of environmental radiological impact in former metallic mines in Extremadura (Spain): A case study.

Metal mining in the Extremadura region was very important in the 19th and 20th centuries. However, due to different reasons the great majority of mines ceased operations, leading to plenty of abandoned mining sites, most of them with on-site waste dumps. Although metal extraction is not radioactive per se, it is considered a NORM activity. In this study, three former mining sites, in which Pb-V-Zn-Ag, Pb-Ag, and Pb-Zn were extracted, were selected to assess the radiological impact on the population and the environment. The external γ exposure was estimated by determining the effective dose and elaborating isodose maps of the sites. The presence of the mining sites increased up to 0.41 mSv/y the effective dose over the surrounding background, which is below the reference value of 1 mSv/y. In only one mining site, the uranium and radium activity concentration of waste dumps were higher than the surrounding soil. The soil to plant (wild grass) transfer factors were similar to other reported values without the influence of NORM activities. So, no enhanced transfer of radionuclides was observed. The radiological impact on the environment was assessed by the risk to non-human biota using the tiered approach developed in ERICA Tool. The sum of the risk quotients of all considered radionuclides in the most conservative Tier 1 was below 1. Total dose rates for several terrestrial Reference Animal and Plants (RAPs) were estimated using Tier 3, obtaining values below 40 µGy/h. Therefore, the impact on non-human biota can be considered as negligible.

Assessment of occupational exposure in a granite quarry and processing factory.

Workers in the granite industry face an occupational hazard: silicosis due to the crystalline silica present in inhalable dust. As granite can also present a variable, and occasionally significant, content of naturally occurring radionuclides, they may also face a radiological hazard. In order to assess the risk, a granite industry with a quarry and processing factory was selected to assess the occupational exposure. Three main potential pathways were observed: external irradiation, inhalation of granite dust, and radon exposure. The external dose rate was similar to that in a nearby farming area. A slight increment (0.016-0.076 mSv yr-1) was observed in the quarry and stockpile, due to quarry faces and granite blocks. The effective dose due to granite dust inhalation was 0.182 ± 0.009 mSv yr-1 in the worst case scenario (3 mg m-3 dust load in air and no use of filter masks). Thus, the mean value of the effective dose from these two pathways was 0.26 mSv yr-1, lower than the reference level of 1 mSv yr-1 for the general population. The annual mean value of radon concentration in the indoor air was 33 Bq m-3. However, during granite processing works the radon concentration can increase up to 216 Bq m-3, due to mechanical operations (sawing, polishing, sanding, etc). This radon concentration was below the 600 Bq m-3 reference level for action in working places. Therefore, workers in this granite factory face no significant additional radiological exposure, and no-one needs to be designated as occupationally exposed and subject to individual dosimetry.

Assessment of radiological hazard of commercial granites from Extremadura (Spain).

The term "commercial granite" comprises different natural stones with different mineralogical components. In Extremadura, western Spain, "commercial granites" can be classified in three types: granite s.s. (sensus stricti), granodiorite, and diorite. The content of naturally occurring radionuclides depended of the mineralogy. Thus, the (40)K content increased as the relative content of alkaline feldspar increased but decreased as the plagioclase content increased. The radioactive content decreased in the following order: granite s.s. > granodiorite > diorite. In this work, the radiological hazard of these granites as building material was analyzed in terms of external irradiation and radon exposure. External irradiation was estimated based on the "I" index, ranged between 0.073 and 1.36. Therefore, these granites can be use as superficial building materials with no restriction. Radon exposure was estimated using the surface exhalation rates in polished granites. The exhalation rate in granites depends of their superficial finishes (different roughness). For distinct mechanical finishes of granite (polish, diamond sawed, bush-hammered and flamed), the surface exhalation rate increased with the roughness of the finishes. Thermal finish presented the highest exhalation rate, because the high temperatures applied to the granite may increase the number of fissures within it. The exhalation rates in polished granites varied from 0.013 to 10.4 Bq m(-2) h(-1).

Ultrasonic characterization of granites obtained from industrial quarries of Extremadura (Spain).

The industry of ornamental rocks, such as granites, represents one of the most important industrial activities in the region of Extremadura, SW Spain. A detailed knowledge of the intrinsic properties of this natural stone and its environmental evolution is a required goal in order to fully characterize its quality. In this work, two independent NDT acoustic techniques have been used to measure the acoustic velocity of longitudinal waves in different prismatic granitic-samples of industrial quarries. A low-frequency transceiver set-up, based on a high-voltage BPV Steinkamp instrument and two 50 kHz probes, has been used to measure pulse travel times by ultrasonic through-transmission testing. In complementary fashion, an Erudite MK3 test equipment with an electromagnetic vibrator and two piezoelectric sensors has also been employed to measure ultrasonic velocity by means of a resonance-based method, using the same types of granite varieties. In addition, a comprehensive set of physical/mechanical properties have also been analyzed, according to Spanish regulations in force, by means of alternative methods including destructive techniques such as strength, porosity, absorption, etc. A large number of samples, representing the most important varieties of granites from quarries of Extremadura, have been analyzed using the above-mentioned procedures. Some results obtained by destructive techniques have been correlated with those found using ultrasonic techniques. Our experimental setting allowed a complementary characterization of granite samples and a thorough validation of the different techniques employed, thus providing the industry of ornamental rocks with a non-destructive tool that will facilitate a more detailed insight on the properties of the rocks under study.