Drug Repositioning Using Computer-aided Drug Design (CADD).

Drug repositioning is a method of using authorized drugs for other unusually complex diseases. Compared to new drug development, this method is fast, low in cost, and effective. Through the use of outstanding bioinformatics tools, such as computer-aided drug design (CADD), computer strategies play a vital role in the re-transformation of drugs. The use of CADD's special strategy for target-based drug reuse is the most promising method, and its realization rate is high. In this review article, we have particularly focused on understanding the various technologies of CADD and the use of computer-aided drug design for target-based drug reuse, taking COVID-19 and cancer as examples. Finally, it is concluded that CADD technology is accelerating the development of repurposed drugs due to its many advantages, and there are many facts to prove that the new ligand-targeting strategy is a beneficial method and that it will gain momentum with the development of technology.

An examining the static and dynamic mechanical characteristics of milled ramie root reinforced polyester composites.

This research works discuss about the effective utilization of waste Ramie Root, that has been in reinforced polyester composites, powdered fillers that have not been treated are used. Four different composites plate were formed with compression moulding technique process consisting of 20, 30 and 40% of Powdered Ramie Root with 80, 70 and 60% unsaturated polyester resin, respectively. The maximum mechanical properties were observed for the composite with 30:70 weight volume percentages of milled ramie root synthetic reinforced polyester. The findings show that the glass transition temperature, storage modulus, and loss factors all rise when the composition of composites changes. Additionally, the powder cohesion force (bonding strength) has a greater impact on dynamic mechanical properties. Thermo-gravimetric the inclusion of Ramie Root powder caused the thermal deterioration peak of the composite to move from 370 °C to 418 °C, according to analysis (TGA) conducted under flowing oxygen. According to the measurement of water absorption, the ideal weight ratio of Fiber: Unsaturated Polyester Resin is 30:70, which modifies the fibres' surfaces and ensures optimal adhesion between the fibre and matrix in composite materials. Scanning electron microscopic investigation is done to ascertain the fracture behaviour of the composite. As a result of their stability, high tensile strength, and bending stiffness, the produced composites can be used in light-load applications by material technologists.

Factors Associated with the Prevalence of Hepatitis B among Volunteer Blood Donors at Jimma Blood Bank, South Ethiopia.

Background: Hepatitis B is a severe, widespread infectious disease of the liver that affects millions of people around the world. It is one of the life-threatening liver infections caused by the hepatitis B virus (HBV). HBV is the cause of up to 80% of cases of primary liver cancer. Due to the potential risk associated with HBV infection, it is important to study the factors which are associated with the seropositive volunteers. Objective: The purpose of this study was to identify factors associated with seropositivity for the hepatitis B virus among volunteers who donated blood at the Jimma Blood Bank in southern Ethiopia. Methods: Cross-sectional research was conducted on blood donors who came to the Jimma Blood Bank to donate their blood. Three hundred and fifty-nine volunteer blood donors who arrived at the Jimma Blood Bank were investigated face-to-face in order to collect sociodemographic characteristics and risk factors for HBV infection. The data were analyzed using statistical software SPSS version 20.0. The association between the risk factor for HBV infection and HBV infection was determined using chi-square tests. Result: In total, there were 359 participants; their mean age was 22.5, among which 161 (44.8%) were males. Out of 359 volunteers, 13 (3.6%) were seropositive for HBsAg. The test positivity rate among males was 7/198 (3.54%), while the rate among females was 6/161 (3.7%). More than 3/4 of those who tested positive were under the age of 40. Chi-square analysis showed that volunteers whose income was between 12 and 26.84 USD were less likely to have the infectious disease than those whose income was less than 11.84 USD per month (p=0.042). Conclusion: The prevalence of HBV was found to be 3.6% among selected volunteers. It was found that, out of 20 volunteers, 13 had infection. Chi-square analysis showed that HBV infection was associated with low monthly income and the use of unsafe therapeutic injections.

Fluorescence and UV/visible spectroscopic investigation of orange and mango fruit juice quality in case of Adama Town.

Extracted Mango and Orange juices were investigated by using spectroscopic techniques such as UV/Visible and Fluorescence. Three portions of samples (fresh juice) were stored at 22 °C for eight days, stored in a water bath and heated at 40 °C, 60 °C, and 80 °C for ten minutes. The highest wavelengths (455 nm) were observed from the UV/Vis results for fresh Mango juices, while 270 nm and 460 nm were observed for stored Mango juices. Furthermore, wavelengths of 320 nm were observed in heat-treated mango juice (40 °C). No absorption peaks were observed at 60 °C and 80 °C due to temperature effects. Absorption peaks of fresh fruit were observed at 330 nm and 390 nm, while 260 nm and 320 nm reflect stored orange juices absorptions peaks. From heat-treated stored (40 °C and 60 °C) samples, 320 nm and 260 nm absorption peaks were observed, respectively. Wavelength observed (454 nm, 540 nm & 700 nm) peaks represent the fresh mango juice spectra, while 460 nm and 700 nm are for stored Mango juices. The peaks observed in the region of 400-500 nm and at 700 nm represent heat-treated mango juices at 40 °C. Heat stored Mango juices (60 °C & 80 °C) have peaks at 700 nm. Peaks observed at 700 nm, 500 nm, and 455 nm reflect fresh orange juice, while 460-500 nm and 700 nm represent the emission spectra of the samples. The stored orange juice peaks at 460-500 nm and at 700 nm, but heated-stored orange juice peaks only at 700 nm. The pH values for orange and mango juices were 3.52-3.73 and 4.02-4.72, respectively.

Energy recovery of waste plastics into diesel fuel with ethanol and ethoxy ethyl acetate additives on circular economy strategy.

The widespread use of plastic goods creates huge disposal issues and environmental concerns. Increasing emphasis has been paid to the notion of a circular economy, which might have a significant impact on the demand for plastic raw materials. Post-consumer plastics recycling is a major focus of the nation's circular economy. This study focuses on energy recovery from waste plastics as an alternative fuel source to meet the circular economy demand. Waste plastic fuel produced through pyrolysis has been claimed to be utilized as a substituted fuel. This work focuses to determine the performance and emission standards of Waste Plastic Fuel (WPF) generated from the pyrolysis of High-Density Polyethylene (HDPE) in a single-cylinder Direct Injection Diesel Engine (DIDE). Three different ratios of WPF were combined with 10% ethanol and 10% ethoxy ethyl acetate as an oxygenated additive to create quaternary fuel blends. The ethanol has a low viscosity, a high oxygen content, a high hydrogen-to-carbon ratio as favourable properties, the quaternary fuel results the improved brake thermal efficiency, fuel consumption and reduced emissions. The blend WEE20 exhibits 4.7% higher brake thermal efficiency, and 7.8% reduced fuel consumption compared to the diesel. The quaternary fuel blends demonstrated decreased carbon monoxide of 3.7 to 13.4% and reduced hydrocarbons of 2 to 16% under different load conditions.

Examining Impacts of Acidic Bath Temperature on Nano-Synthesized Lead Selenide Thin Films for the Application of Solar Cells.

The influence of bath temperature on nano-manufactured PbSe (lead selenide) films was successfully generated by utilizing CBD on the acid solution's metal surface tool. Pb (NO3)2 was employed as a lead ion source as a precursor, while Na2O4Se was used as a selenide ion source. The XRD characterization revealed that the prepared samples are the property of crystalline structure (111), (101), (100), and (110) Miller indices. The scanning electron microscope indicated that the particles have a rock-like shape. There was a decrement of energy bandgap that is from 2.4 eV to 1.2 eV with increasing temperature 20°C-85°C. Thin films prepared at 85°C revealed the best polycrystal structure as well as homogeneously dispersed on the substrate at superior particle scales. The photoluminescence spectrophotometer witnessed that as the temperature of the solution bath increases from 20°C to 85°C, the average strength of PL emission of the film decreases. The maximum photoluminescence strength predominantly exists at high temperatures because of self-trapped exciton recombination, formed from O2 vacancy and particle size what we call defect centres, for the deposited thin films at 45°C and 85°C. Therefore, the finest solution temperature is 85°C.

Anticancer, Enhanced Antibacterial, and Free Radical Scavenging Potential of Fucoidan- (Fucus vesiculosus Source) Mediated Silver Nanoparticles.

The present research displays the green synthesis of stable silver nanoparticles (AgNPs). The aqueous solution of Fucoidan from Fucus vesiculosus source (brown marine algae) is used as a reducing and capping agent. UV-Vis spectroscopy, XRD, FT-IR, SEM, EDX, and TEM with selected area electron diffraction are used to characterize the synthesized silver nanoparticles (AgNPs). The synthesized AgNPs exhibit a surface plasmon resonance at 430 nm after 24 h. The characterization results showed that AgNPs are crystalline in nature and exhibit mostly spherical shapes with an average diameter of 4-45 nm. Silver nanoparticles showed effective antibacterial activity against representative pathogens of bacteria. The activities of commercial antibiotics were enhanced by impregnation with the synthesized AgNPs. It also shows good fungicidal and anticancer activity against liver and lung cell lines and shows significant antioxidant efficacy (84%) at 10 µg/ml AgNP concentration against DPPH. The utilization of environmentally synthesized AgNPs offers numerous benefits of ecofriendliness and compatibility for biomedical applications.