RESUMEN
Sulfur dioxide (SO2) is a harmful acidic gas generated from power plants and fossil fuel combustion and represents a significant health risk and threat to the environment. Benzimidazole-linked polymers (BILPs) have emerged as a promising class of porous solid adsorbents for toxic gases because of their chemical and thermal stability as well as the chemical nature of the imidazole moiety. The performance of BILPs in SO2 capture was examined by synergistic experimental and theoretical studies. BILPs exhibit a significantly high SO2 uptake of up to 8.5 mmol g-1 at 298 K and 1.0 bar. The density functional theory (DFT) calculations predict that this high SO2 uptake is due to the dipole-dipole interactions between SO2 and the functionalized polymer frames through O2S(δ+)···N(δ-)-imine and OâSâO(δ-)···H(δ+)-aryl and intermolecular attraction between SO2 molecules (OâSâO(δ-)···S(δ+)O2). Moderate isosteric heats of adsorption (Qst ≈ 38 kJ mol-1) obtained from experimental SO2 uptake studies are well supported by the DFT calculations (≈40 kJ mol-1), which suggests physisorption processes enabling rapid adsorbent regeneration for reuse. Repeated adsorption experiments with almost identical SO2 uptake confirm the easy regeneration and robustness of BILPs. Moreover, BILPs possess very high SO2 adsorption selectivity at low concentration over carbon dioxide (CO2), methane (CH4), and nitrogen (N2): SO2/CO2, 19-24; SO2/CH4, 118-113; SO2/N2, 600-674. This study highlights the potential of BILPs in the desulfurization of flue gas or other gas mixtures through capturing trace levels of SO2.
RESUMEN
Efficient management of radionuclides that are released from various processes in the nuclear fuel cycle is of significant importance. Among these nuclides, radioactive iodine (mainly 129I and 131I) is a major concern due to the risk it poses to the environment and to human health; thus, the development of materials that can capture and safely store radioactive iodine is crucial. Herein, a novel silver-thione-functionalized zeolitic imidazole framework (ZIF) was synthesized via postsynthetic modification and assessed for its iodine uptake capabilities alongside the parent ZIF-8 and intermediate materials. A solvent-assisted ligand exchange procedure was used to replace the 2-methylimidazole linkers in ZIF-8 with 2-mercaptoimidazole, forming intermediate compound ZIF-8 = S, which was reacted with AgNO3 to yield the ZIF-8 = S-Ag+ composite for iodine uptake. Despite possessing the lowest BET surface area of the derivatives, the Ag-functionalized material demonstrated superior I2 adsorption in terms of both maximum capacity (550 g I2/mol) and rapid kinetics (50% loading achieved in 5 h, saturation in 50 h) compared to that of our pristine ZIF-8, which reached 450 g I2/mol after 150 h and 50% loading in 25 h. This improvement is attributed to the presence of the Ag+ ions, which provide a strong chemical driving force to form a stable Ag-I species. The results of this study contribute to a broader understanding of the strategies that can be employed to engineer adsorbents with robust iodine uptake behavior.
RESUMEN
Thin-film composite mixed-matrix membranes (TFC-MMMs) have potential applications in practical gas separation processes because of their high permeance (gas flux) and gas selectivity. In this study, we fabricated a high-performance TFC-MMM based on a rubbery comb copolymer, i.e., poly(2-[3-(2H-benzotriazol-2-yl)-4-hydroxyphenyl] ethyl methacrylate)-co-poly(oxyethylene methacrylate) (PBE), and metal-organic framework MOF-808 nanoparticles. The rubbery copolymer penetrates through the pores of MOF-808, thereby tuning the pore size. In addition, the rubbery copolymer forms a defect-free interfacial morphology with polymer-infiltrated MOF-808 nanoparticles. Consequently, TFC-MMMs (thickness = 350 nm) can be successfully prepared even with a high loading of MOF-808. As polymer-infiltrated MOF is incorporated into the polymer matrix, the PBE/MOF-808 membrane exhibits a significantly higher CO2 permeance (1069 GPU) and CO2/N2 selectivity (52.7) than that of the pristine PBE membrane (CO2 permeance = 431 GPU and CO2/N2 selectivity = 36.2). Therefore, the approach considered in this study is suitable for fabricating high-performance thin-film composite membranes via polymer infiltration into MOF pores.
RESUMEN
PoreMatMod.jl is a free, open-source, user-friendly, and documented Julia package for modifying crystal structure models of porous materials such as metal-organic frameworks (MOFs). PoreMatMod.jl functions as a find-and-replace algorithm on crystal structures by leveraging (i) Ullmann's algorithm to search for subgraphs of the crystal structure graph that are isomorphic to the graph of a query fragment and (ii) the orthogonal Procrustes algorithm to align a replacement fragment with a targeted substructure of the crystal structure for installation. The prominent application of PoreMatMod.jl is to generate libraries of hypothetical structures for virtual screenings. For example, one can install functional groups on the linkers of a parent MOF, mimicking postsynthetic modification. Other applications of PoreMatMod.jl to modify crystal structure models include introducing defects with precision and correcting artifacts of X-ray structure determination (adding missing hydrogen atoms, resolving disorder, and removing guest molecules). The find-and-replace operations implemented by PoreMatMod.jl can be applied broadly to diverse atomistic systems for various in silico structural modification tasks.
Asunto(s)
Algoritmos , Estructuras Metalorgánicas , Estructuras Metalorgánicas/química , PorosidadRESUMEN
The capture of the xenon and krypton from nuclear reprocessing off-gas is essential to the treatment of radioactive waste. Although various porous materials have been employed to capture Xe and Kr, the development of high-performance adsorbents capable of trapping Xe/Kr at very low partial pressure as in the nuclear reprocessing off-gas conditions remains challenging. Herein, we report a self-adjusting metal-organic framework based on multiple weak binding interactions to capture trace Xe and Kr from the nuclear reprocessing off-gas. The self-adjusting behavior of ATC-Cu and its mechanism have been visualized by the in-situ single-crystal X-ray diffraction studies and theoretical calculations. The self-adjusting behavior endows ATC-Cu unprecedented uptake capacities of 2.65 and 0.52â mmol g-1 for Xe and Kr respectively at 0.1â bar and 298â K, as well as the record Xe capture capability from the nuclear reprocessing off-gas. Our work not only provides a benchmark Xe adsorbent but proposes a new route to construct smart materials for efficient separations.
RESUMEN
Molten salt reactor operation will necessitate circulation of a cover gas to remove certain evolved fission products and maintain an inert atmosphere. The cover gas leaving the reactor core is expected to contain both noble and non-noble gases, aerosols, volatile species, tritium, and radionuclides and their daughters. To remove these radioactive gases, it is necessary to develop a robust off-gas system, along with novel sensors to monitor the gas stream and the treatment system performance. In this study, a metal organic framework (MOF) was engineered for the capture of Xe, a major contributor to the off-gas source term. The engineered MOF column was tested with a laser-induced breakdown spectroscopy (LIBS) sensor for noble gas monitoring. The LIBS sensor was used to monitor breakthrough tests with various Xe, Kr, and Ar mixtures to determine the Xe selectivity of the MOF column. This study offers an initial demonstration of the feasibility of monitoring off-gas treatment systems using a LIBS sensor to aid in the development of new capture systems for molten salt reactors.
RESUMEN
Two lanthanide-containing porous coordination polymers, [Ln2(bpdc)6(phen)2]·nH2O (1) and [Ln2(bpdc)6(terpy)2]·3H2O (2) (Ln = Pr, Nd, or Sm-Dy; bpdc: 2,2'-bipyridine-5,5'-dicarboxylic acid; phen: 1,10-phenanthroline; and terpy: 2,2':6',2â³-terpyridine), have been hydrothermally synthesized and structurally characterized by powder and single-crystal X-ray diffraction. Crystallographic analyses reveal that compounds 1 and 2 feature Ln3+-containing dimeric nodes that form a porous two-dimensional (2D) and nonporous three-dimensional (3D) framework, respectively. Each material is stable in aqueous media between pH 3 and 10 and exhibits modest thermal stability up to â¼400 °C. Notably, a portion of the phen and bpdc ligands in 1 can be removed thermally, without compromising the crystal structure, causing the surface area and pore volume to increase. The optical properties of 1 and 2 with Gd3+, Sm3+, Tb3+, and Eu3+ are explored in the solid state using absorbance, fluorescence, and lifetime spectroscopies. The analyses reveal a complex blend of metal and ligand emission in the materials containing Sm3+ and Tb3+, while those featuring Eu3+ are dominated by intense metal-based emission. Compound 1 with Eu3+ shows promise for the capture and detection of the uranyl cation (UO2)2+ from aqueous media. In short, uranyl capture is observed at pH 4, and the adsorption thereof is detectable via vibrational and fluorescence spectroscopies and colorimetrically as the off-white color of 1 turns yellow with uptake. Finally, both 1 and 2 with Eu3+ produce bright red emission upon irradiation with Cu Kα X-ray radiation (8.04 keV) and are candidate materials for applications in solid-state scintillation.
RESUMEN
Light olefins are the precursors of all modern-day plastics. Olefin is always mixed with paraffins in the time of production, and therefore it needs to be separated from paraffins to produce polymer-grade olefin. The state-of-the-art separation technique, cryogenic distillation, is highly expensive and hazardous. Adsorption could be a novel, sustainable, and inexpensive separation strategy, provided a suitable adsorbent can be designed. There are different types of mechanisms that were harnessed for the separation of olefins by adsorption, and in this review, we have focused our discussion on those mechanisms. These mechanisms include, (a) Affinity-based separation, like pi complexation and hydrogen bonding, (b) Separation based on pore size and shape, like size-exclusion and gate-opening effect, and (c) Non-equilibrium separation, like kinetic separation. In this review, we have elaborated each of the separation strategies from the fundamental level and explained their roles in the separation processes of different types of paraffins and olefins.
RESUMEN
Metal-organic frameworks (MOFs) are nanoporous materials with good prospects as recognition elements for gas sensors owing to their adsorptive sensitivity and selectivity. A gravimetric, MOF-based sensor functions by measuring the mass of gas adsorbed in a MOF. Changes in the gas composition are expected to produce detectable changes in the mass of gas adsorbed in the MOF. In practical settings, multiple components of the gas adsorb into the MOF and contribute to the sensor response. As a result, there are typically many distinct gas compositions that produce the same single-sensor response. The response vector of a gas sensor array places multiple constraints on the gas composition. Still, if the number of degrees of freedom in the gas composition is greater than the number of MOFs in the sensor array, the map from gas compositions to response vectors will be non-injective (many-to-one). Here, we outline a mathematical method to determine undetectable changes in gas composition to which non-injective gas sensor arrays are unresponsive. This is important for understanding their limitations and vulnerabilities. We focus on gravimetric, MOF-based gas sensor arrays. Our method relies on a mixed-gas adsorption model in the MOFs comprising the sensor array, which gives the mass of gas adsorbed in each MOF as a function of the gas composition. The singular value decomposition of the Jacobian matrix of the adsorption model uncovers (i) the unresponsive directions and (ii) the responsive directions, ranked by sensitivity, in gas composition space. We illustrate the identification of unresponsive subspaces and ranked responsive directions for gas sensor arrays based on Co-MOF-74 and HKUST-1 aimed at quantitative sensing of CH4/N2/CO2/C2H6mixtures relevant to natural gas sensing.
RESUMEN
The unique features of metal-organic frameworks (MOFs), such as their large surface areas and diversity of structures, make them suitable for a broad range of applications including storage, separation, and sensing of gases. Among all the MOFs, Mg-MOF-74 with the highest CO2 uptake at 1 bar and 25 °C would be particularly beneficial for CO2-related applications. One of the most critical enabling technologies for implementing Mg-MOF-74 is the preparation of dense and continuous films that would maximize the sorption behaviors. However, Mg-MOF-74 thin films present significant challenges in demonstrating large-scale coatings. Herein, we demonstrate for the first time high-quality Mg-MOF-74 films synthesized via a vapor-assisted crystallization (VAC) process. The VAC process described herein provides dense and highly crystalline layers of the Mg-MOF-74 thin film with a low coefficient of variation of film thickness below 7%. By minimizing the solvent use, the VAC process is also more environmentally friendly than conventional techniques. In this work, we first optimized a precursor solution for the VAC process and then investigated the effects of synthesis temperature, time, and droplet volume on the growth, crystallinity, and thickness of VAC Mg-MOF-74 films. The porosity of the MOF film was assessed by measuring the CO2 uptake at room temperature and 1 bar. The obtained VAC Mg-MOF-74 films possess a well-defined microporosity, as deduced from CO2 adsorption studies via quartz crystal microbalance (QCM) and comparison with bulk Mg-MOF-74 reference data. Furthermore, CO2 cyclic adsorption-desorption experiments on the VAC Mg-MOF-74 films showed scaled uptakes to a wide range of CO2 concentration without showing significant variations in the baseline. We specifically demonstrate how the film's quality of the MOF affects adsorption behavior of CO2 on VAC Mg-MOF-74 and drop-cast Mg-MOF-74 films.
RESUMEN
Directed synthesis promises control over architecture and function of framework materials. In practice, however, designing such syntheses requires a detailed understanding of the multistep pathways of framework formations, which remain elusive. By identifying intermediate coordination complexes, this study provides insights into the complex role of a structure-directing agent (SDA) in the synthetic realization of a promising material. Specifically, a novel molecular intermediate was observed in the formation of an indium zeolitic metal-organic framework (ZMOF) with a sodalite topology. The role of the imidazole SDA was revealed by time-resolved in situ powder X-ray diffraction (XRD) and small-angle X-ray scattering (SAXS).
RESUMEN
Mechanically robust forms of HKUST-1 metal-organic frameworks (MOFs) were fabricated by embedding the MOF crystals in a passive polyacrylonitrile (PAN) matrix at different MOF loadings of 10-90 mass %. PAN is highly porous and acts as a scaffold that holds the active MOF adsorbent in place. These MOF-PAN composites were then evaluated for capturing Xe. Data presented herein show that the PAN matrix does not notably interfere with the Xe capture process, where the Xe capacities scale somewhat linearly with the increase in MOF loadings within the composites. Also, γ radiation exposures to the composites revealed that they are highly tolerant to these types of radiation fields.
RESUMEN
Capture and storage of volatile radionuclides that result from processing of used nuclear fuel is a major challenge. Solid adsorbents, in particular ultra-microporous metal-organic frameworks, could be effective in capturing these volatile radionuclides, including 85Kr. However, metal-organic frameworks are found to have higher affinity for xenon than for krypton, and have comparable affinity for Kr and N2. Also, the adsorbent needs to have high radiation stability. To address these challenges, here we evaluate a series of ultra-microporous metal-organic frameworks, SIFSIX-3-M (M = Zn, Cu, Ni, Co, or Fe) for their capability in 85Kr separation and storage using a two-bed breakthrough method. These materials were found to have higher Kr/N2 selectivity than current benchmark materials, which leads to a notable decrease in the nuclear waste volume. The materials were systematically studied for gamma and beta irradiation stability, and SIFSIX-3-Cu is found to be the most radiation resistant.
RESUMEN
Molecular confinement plays a significant effect on trapped gas and solvent molecules. A fundamental understanding of gas adsorption within the porous confinement provides information necessary to design a material with improved selectivity. In this regard, metal-organic framework (MOF) adsorbents are ideal candidate materials to study confinement effects for weakly interacting gas molecules, such as noble gases. Among the noble gases, xenon (Xe) has practical applications in the medical, automotive and aerospace industries. In this Communication, we report an ultra-microporous nickel-isonicotinate MOF with exceptional Xe uptake and selectivity compared to all benchmark MOF and porous organic cage materials. The selectivity arises because of the near perfect fit of the atomic Xe inside the porous confinement. Notably, at low partial pressure, the Ni-MOF interacts very strongly with Xe compared to the closely related Krypton gas (Kr) and more polarizable CO2 . Further 129 Xeâ NMR suggests a broad isotropic chemical shift due to the reduced motion as a result of confinement.
RESUMEN
ZIF-8 was synthesized in supercritical carbon dioxide (scCO2 ). Inâ situ powder X-ray diffraction, exâ situ microscopy, and simulations provide an encompassing view of the formation of ZIF-8 and intermediary ZnO@ZIF-8 composites in this nontraditional solvent. Time-resolved imaging exposed divergent physicochemical reaction pathways from previous studies of the growth of anisotropic ZIF-8 core@shell structures in traditional solvents. Synthetically relevant physiochemical properties of scCO2 were integrated into classical nucleation theory, relating interfacial forces, calculated through DFTB+ based molecular dynamics (MD), with 3D nucleation outcomes. The kinetics of crystallization were examined and displayed a characteristic signature of time- and temperature-dependent mechanisms over the extent of the reaction. Lastly, it is shown that subtle factors, such as the extent of reaction and the size/shape of sacrificial templates can tailor ZIF-8 composition and size, eliciting control over hierarchical porosity in a nonconventional green solvent.
RESUMEN
The objective of this review is to evaluate materials for use as a barrier or other deployed technology to treat technetium-99 (Tc) in the subsurface. To achieve this, Tc interactions with different materials are considered within the context of remediation strategies. Several naturally occurring materials are considered for Tc immobilization, including iron oxides and low solubility sulfide phases. Synthetic materials are also considered, and include tin-based materials, sorbents (resins, activated carbon, modified clays), layered double hydroxides, metal organic frameworks, cationic polymeric networks and aerogels. All of the materials were evaluated for their potential in-situ and ex-situ performance with respect to long-term Tc uptake and immobilization, environmental impacts and deployability. Other factors such as the technology maturity, cost and availability were also considered. Given the difficulty of evaluating materials under different experimental conditions (e.g., solution chemistry, redox conditions, solution to solid ratio, Tc concentration etc.), a subset of these materials will be selected, on the basis of this review, for subsequent standardized batch loading tests.
RESUMEN
Radioiodine-129 (129I) in the subsurface is mobile and limited information is available on treatment technologies. Scientific literature was reviewed to compile information on materials that could potentially be used to immobilize 129I through sorption and redox-driven processes, with an emphasis on ex-situ processes. Candidate materials to immobilize 129I include iron minerals, sulfur-based materials, silver-based materials, bismuth-based materials, ion exchange resins, activated carbon, modified clays, and tailored materials (metal organic frameworks (MOFS), layered double hydroxides (LDHs) and aerogels). Where available, compiled information includes material performance in terms of (i) capacity for 129I uptake; (ii) long-term performance (i.e., solubility of a precipitated phase); (iii) technology maturity; (iv) cost; (v) available quantity; (vi) environmental impact; (vii) ability to emplace the technology for in situ use at the field-scale; and (viii) ex situ treatment (for media extracted from the subsurface or secondary waste streams). Because it can be difficult to compare materials due to differences in experimental conditions applied in the literature, materials will be selected for subsequent standardized batch loading tests.
RESUMEN
The deliberate construction of isoreticular eea-metal-organic frameworks (MOFs) (Cu-eea-1, Cu-eea-2 and Cu-eea-3) and rtl-MOFs (Co-rtl-1 and Co-rtl-2) has been accomplished based on the ligand-to-axial pillaring of supermolecular building layers. The use of different metal ions resulted in two types of supermolecular building layers (SBLs): Kagome (kgm) and square lattices (sql) which further interconnect to form anticipated 3D-MOFs. The isoreticular expansion of (3,6)-connected Cu-MOFs has been achieved with desired eea-topology based on kgm building layers. In addition, two (3,6)-connected Co-rtl-MOFs were also successfully constructed based on sql building layers. The Cu-eea-MOFs were shown to act as hydrogen storage materials with appreciable amount of hydrogen uptake abilities. Moreover Cu-eea-MOFs have also exhibited remarkable CO2 capture ability at ambient condition compared to nitrogen and methane, due to the presence of amide functionalities.
RESUMEN
Herein we report the first example of a metal-organic framework (MOF) in which the location of Li+ ions trapped in the porous confinement can be unambiguously defined by single-crystal X-ray diffraction. Furthermore, the Li+-doped MOF shows significant enhancement in gas uptake as well as selective adsorption of CO2 over CH4.
RESUMEN
The elimination of specific contaminants from competitors poses a significant challenge. Rather than relying on a single direct interaction, the cooperation of multiple functionalities is an emerging strategy for adsorbents design to achieve the required affinity. Here, we describe that the interaction with the target species can be altered by modifying the local environment of the direct contact site, as demonstrated by manipulating the affinity of pyridinium-based anion nanotraps toward pertechnetate. Systematic control of the substituent effect allows the resulting anion nanotraps to combine multiple features, overcoming the long-term challenge of TcO4- segregation under extreme conditions of super acidity and basicity, strong irradiation field, and high ionic strength. The top material exhibits the highest sorption capacity together with record-high extraction efficiencies after a single treatment from conditions relevant to the used nuclear fuel (Hanford tank wastes, 95%) and legacy nuclear wastes (Savannah River Sites, 80%) among materials reported thus far.