Defining a metrologically traceable and sustainable calibration hierarchy of international normalized ratio for monitoring of vitamin K antagonist treatment in accordance with International Organization for Standardization (ISO) 17511:2020 standard: communication from the International Federation of Clinical Chemistry and Laboratory Medicine-SSC/ISTH working group on prothrombin time/international normalized ratio standardization.

Calibration of prothrombin time (PT) in terms of international normalized ratio (INR) has been outlined in "Guidelines for thromboplastins and plasmas used to control oral anticoagulant therapy" (World Health Organization, 2013). The international standard ISO 17511:2020 presents requirements for manufacturers of in vitro diagnostic (IVD) medical devices (MDs) for documenting the calibration hierarchy for a measured quantity in human samples using a specified IVD MD. The objective of this article is to define an unequivocal, metrologically traceable calibration hierarchy for the INR measured in plasma as well as in whole blood samples. Calibration of PT and INR for IVD MDs according to World Health Organization guidelines is similar to that in cases where there is a reference measurement procedure that defines the measurand for value assignment as described in ISO 17511:2020. We conclude that, for PT/INR standardization, the optimal calibration hierarchy includes a primary process to prepare an international reference reagent and measurement procedure that defines the measurand by a value assignment protocol conforming to clause 5.3 of ISO 17511:2020. A panel of freshly prepared human plasma samples from healthy adult individuals and patients on vitamin K antagonists is used as a commutable secondary calibrator as described in ISO 17511:2020. A sustainable metrologically traceable calibration hierarchy for INR should be based on an international protocol for value assignment with a single primary reference thromboplastin and the harmonized manual tilt tube technique for clotting time determination. The primary international reference thromboplastin reagent should be used only for calibration of successive batches of the secondary reference thromboplastin reagent.

DNA and histones impair the mechanical stability and lytic susceptibility of fibrin formed by staphylocoagulase.

Background: Staphylocoagulase (SCG) is a virulence factor of Staphylococcus aureus, one of the most lethal pathogens of our times. The complex of SCG with prothrombin (SCG/ProT) can clot fibrinogen, and SCG/ProT-induced fibrin and plasma clots have been described to show decreased mechanical and lytic resistance, which may contribute to septic emboli from infected cardiac vegetations. At infection sites, neutrophils can release DNA and histones, as parts of neutrophil extracellular traps (NETs), which in turn favor thrombosis, inhibit fibrinolysis and strengthen clot structure. Objectives: To characterize the combined effects of major NET-components (DNA, histone H1 and H3) on SCG/ProT-induced clot structure, mechanical and lytic stability. Methods: Recombinant SCG was used to clot purified fibrinogen and plasma. The kinetics of formation and lysis of fibrin and plasma clots containing H1 or core histones+/-DNA were followed by turbidimetry. Fibrin structure and mechanical stability were characterized with scanning electron microscopy, pressure-driven permeation, and oscillation rheometry. Results: Histones and DNA favored the formation of thicker fibrin fibers and a more heterogeneous clot structure including high porosity with H1 histone, whereas low porosity with core histones and DNA. As opposed to previous observations with thrombin-induced clots, SCG/ProT-induced fibrin was not mechanically stabilized by histones. Similarly to thrombin-induced clots, the DNA-histone complexes prolonged fibrinolysis with tissue-type plasminogen activator (up to 2-fold). The anti-fibrinolytic effect of the DNA and DNA-H3 complex was observed in plasma clots too. Heparin (low molecular weight) accelerated the lysis of SCG/ProT-clots from plasma, even if DNA and histones were also present. Conclusions: In the interplay of NETs and fibrin formed by SCG, DNA and histones promote structural heterogeneity in the clots, and fail to stabilize them against mechanical stress. The DNA-histone complexes render the SCG-fibrin more resistant to lysis and thereby less prone to embolization.

Quantitation of thrombin-activatable fibrinolysis inhibitor in human plasma by isotope dilution mass spectrometry.

Measurement of Thrombin-activatable fibrinolysis inhibitor (TAFI) in human plasma is dependent on reproducible assays. To date, standards for measuring TAFI are frequently calibrated relative to pooled normal human plasma and arbitrarily assigned a potency of 100% TAFI, despite variation in TAFI concentrations between plasma pools. Alternatively, TAFI calibrators can be assigned a value in SI units but the approach used for value assignment is not consistent and furthermore, if purified TAFI is used to determine TAFI concentration in plasma, may be adversely affected by matrix effects. A TAFI plasma standard in mass units with traceability to the SI unit of mass is desirable. We report here the establishment of a quantitative mass spectrometry method for TAFI in plasma. Traceability is obtained by reference to calibrators that consist of blank plasma spiked with a defined amount of purified TAFI, value assigned by amino acid analysis. The calibrators are run alongside the samples, using the same preparation steps and conditions; an acetonitrile assisted tryptic digestion and multi-dimensional liquid chromatography (LC) separation followed by MRM-MS analysis. We measured the TAFI quantitatively in human plasma with reproducibility, reliability and precision, and demonstrated the applicability of this approach for value assigning a common reference standard.

Structure, Mechanical, and Lytic Stability of Fibrin and Plasma Coagulum Generated by Staphylocoagulase From Staphylococcus aureus.

Staphylococcus aureus causes localized infections or invasive diseases (abscesses or endocarditis). One of its virulence factors is staphylocoagulase (SCG), which binds prothrombin to form a complex with thrombin-like proteolytic activity and leads to uncontrolled fibrin generation at sites of bacterial inoculation. The aim of this study was to characterize the formation, structure, mechanical properties and lysis of SCG-generated clots. Recombinant SCG was expressed in Escherichia coli, purified and the amidolytic activity of its complexes with human prothrombin (SCG-PT) and thrombin (SCG-T) was determined using human thrombin as a reference. Fibrin clots were prepared from purified fibrinogen and human plasma using thrombin, SCG-PT or SCG-T as a coagulase. The kinetics of clot formation and lysis by tissue-type plasminogen activator (tPA) were monitored with turbidimetric assays. Fibrin ultrastructure was examined with scanning electron microscopy and small-angle X-ray scattering (SAXS). Fibrin clot porosity was characterized with fluid permeation assays, whereas the viscoelastic properties and mechanical stability were evaluated with oscillation rheometry. Compared to thrombin, the amidolytic and clotting activity of SCG-PT was 1.6- to 2.5-fold lower on a molar basis. SCG-T had equivalent amidolytic, but reduced clotting activity both on pure fibrinogen (1.6-fold), and in plasma (1.3-fold). The SCG-PT and SCG-T generated fibrin with thicker fibers (10-60% increase in median diameter) than thrombin due to increased number of fibrin protofibrils per fiber cross-section. According to the fluid permeability of the clots SCG-PT and SCG-T promoted the formation of more porous structures. The shear stress resistance in the pure fibrin and plasma clots generated by SCG-PT was significantly lower than in the thrombin clots (243.8 ± 22.0 Pa shear stress was sufficient for disassembly of SCG-PT fibrin vs. 937.3 ± 65.6 Pa in thrombin clots). The tPA-mediated lysis of both pure fibrin and plasma clots produced by SCG-PT or SCG-T was accelerated compared to thrombin, resulting in up to a 2.1-fold increase in tPA potency. Our results indicate that SCG generates a thrombus scaffold with a structure characterized by impaired mechanical stability and increased lytic susceptibility. This proneness to clot disintegration could have implications in the septic embolism from endocardial bacterial vegetation.

Endothelial cell functions impaired by interferon in vitro: Insights into the molecular mechanism of thrombotic microangiopathy associated with interferon therapy.

INTRODUCTION: Interferon (IFN)-α and IFN-ß approved for treatment of chronic hepatitis C viral infection and multiple sclerosis respectively have been linked to thrombotic microangiopathy (TMA) affecting renal function. Since the molecular mechanisms underlying this severe complication remain largely unclear, we aimed to investigate whether IFN affects directly in vitro endothelial cell functions associated with angiogenesis and blood haemostasis, as well as endothelial cell-derived vasodilators of nitric oxide (NO) and prostacyclin. METHODS: Proliferation and survival of human umbilical vein endothelial cells (HUVECs) were measured by BrdU incorporation and alamarBlue assays. Angiogenesis was evaluated in co-cultures of HUVECs and human dermal fibroblasts. Fibrinolysis molecules were measured with ELISA. NO and prostacyclin were measured using a fluorescent NO-specific probe and a competitive enzyme immunoassay, respectively. RESULTS: HUVEC proliferation was dose-dependently inhibited by IFN-ß1a and IFN-ß1b, but not by IFN-α2a and IFN-α2b. Consistently, IFN-ß1a and IFN-ß1b also reduced survival of HUVECs, but this again was not observed with IFN-α. However, both IFN subtypes inhibited VEGF-induced development of capillary-like structures, but the effect of IFN-α was less potent than IFN-ß. In addition, both IFN subtypes upregulated interferon inducible protein 10 production from treated co-cultures while suppressing angiogenesis. Furthermore, intracellular NO generation was reduced by IFN-α2a and IFN-ß1a, whereas prostacyclin release from HUVECs was not affected by IFN. Importantly, both IFN-ß1a- and IFN-ß1b-treated HUVECs showed a marked reduction in urokinase-type plasminogen activator release and a much greater secretion of plasminogen activator inhibitor-1 than tissue-type plasminogen activator compared with untreated cells, suggesting decreased fibrinolytic activity. IFN-α, however was less effective in modulating the fibrinolysis system. CONCLUSIONS: We demonstrate the detrimental effects of IFN on endothelial cell functions mediated with angiogenesis and fibrinolysis, which could potentially cause the loss of physiological endothelium thromboresistance and facilitate the development of vascular complications in a clinical setting. Mechanistically, our findings have implications for understanding how IFN therapy can foster the development of TMA.

Mechanism of plasmin generation by S100A10.

Plasminogen (Pg) is cleaved to form plasmin by the action of specific plasminogen activators such as the tissue plasminogen activator (tPA). Although the interaction of tPA and Pg with the surface of the fibrin clot has been well characterised, their interaction with cell surface Pg receptors is poorly understood. S100A10 is a cell surface Pg receptor that plays a key role in cellular plasmin generation. In the present report, we have utilised domain-switched/deleted variants of tPA, truncated plasminogen variants and S100A10 site-directed mutant proteins to define the regions responsible for S100A10-dependent plasmin generation. In contrast to the established role of the finger domain of tPA in fibrin-stimulated plasmin generation, we show that the kringle-2 domain of tPA plays a key role in S100A10-dependent plasmin generation. The kringle-1 domain of plasminogen, indispensable for fibrin-binding, is also critical for S100A10-dependent plasmin generation. S100A10 retains activity after substitution or deletion of the carboxyl-terminal lysine suggesting that internal lysine residues contribute to its plasmin generating activity. These studies define a new paradigm for plasminogen activation by the plasminogen receptor, S100A10.

Activity Regulation by Fibrinogen and Fibrin of Streptokinase from Streptococcus Pyogenes.

Streptokinase is a virulence factor of streptococci and acts as a plasminogen activator to generate the serine protease plasmin which promotes bacterial metastasis. Streptokinase isolated from group C streptococci has been used therapeutically as a thrombolytic agent for many years and its mechanism of action has been extensively studied. However, group A streptococci are associated with invasive and potentially fatal infections, but less detail is available on the mechanism of action of streptokinase from these bacteria. We have expressed recombinant streptokinase from a group C strain to investigate the therapeutic molecule (here termed rSK-H46A) and a molecule isolated from a cluster 2a strain from group A (rSK-M1GAS) which is known to produce the fibrinogen binding, M1 protein, and is associated with life-threatening disease. Detailed enzyme kinetic models have been prepared which show how fibrinogen-streptokinase-plasminogen complexes regulate plasmin generation, and also the effect of fibrin interactions. As is the case with rSK-H46A our data with rSK-M1GAS support a "trigger and bullet" mechanism requiring the initial formation of SK•plasminogen complexes which are replaced by more active SK•plasmin as plasmin becomes available. This model includes the important fibrinogen interactions that stimulate plasmin generation. In a fibrin matrix rSK-M1GAS has a 24 fold higher specific activity than the fibrin-specific thrombolytic agent, tissue plasminogen activator, and 15 fold higher specific activity than rSK-H46A. However, in vivo fibrin specificity would be undermined by fibrinogen stimulation. Given the observed importance of M1 surface receptors or released M1 protein to virulence of cluster 2a strain streptococci, studies on streptokinase activity regulation by fibrin and fibrinogen may provide additional routes to addressing bacterial invasion and infectious diseases.

Fractal kinetic behavior of plasmin on the surface of fibrin meshwork.

Intravascular fibrin clots are resolved by plasmin acting at the interface of gel phasesubstrate and fluid-borne enzyme. The classic Michaelis.Menten kinetic scheme cannot describe satisfactorily this heterogeneous-phase proteolysis because it assumes homogeneous well-mixed conditions. A more suitable model for these spatial constraints,known as fractal kinetics, includes a time-dependence of the Michaelis coefficient Km(F) = Km0F (1+ t)h, where h is a fractal exponent of time, t. The aim of the present study was to build up and experimentally validate a mathematical model for surface-acting plasmin that can contribute to a better understanding of the factors that influence fibrinolytic rates. The kinetic model was fitted to turbidimetric data for fibrinolysis under various conditions. The model predicted Km0(F) = 1.98 µM and h = 0.25 for fibrin composed of thin fibers and Km0(F) = 5.01 µM and h = 0.16 for thick fibers in line with a slower macroscale lytic rate (due to a stronger clustering trend reflected in the h value) despite faster cleavage of individual thin fibers (seen as lower Km0(F) ). ε-Aminocaproic acid at 1 mM or 8 U/mL carboxypeptidase-B eliminated the time-dependence of Km F and increased the lysis rate suggesting a role of C-terminal lysines in the progressive clustering of plasmin. This fractal kinetic concept gained structural support from imaging techniques. Atomic force microscopy revealed significant changes in plasmin distribution on a patterned fibrinogen surface in line with the time-dependent clustering of fluorescent plasminogen in confocal laser microscopy. These data from complementary approaches support a mechanism for loss of plasmin activity resulting from C-terminal lysine-dependent redistribution of enzyme molecules on the fibrin surface.

Biological standards for potency assignment to fibrinolytic agents used in thrombolytic therapy.

Thrombolytic drugs are used for the treatment of thrombotic disorders such as acute myocardial infarction, acute ischemic stroke, and pulmonary embolism. Biological standards are used for potency assignment to the range of fibrinolytic proteins used in thrombolytic therapy. The World Health Organization (WHO) International Standards are primary reference materials, calibrated in arbitrary units (international unit), assigned by collaborative study using the range of assay methods available at the time. Provided the standard and test material are equivalent, adhering to the principle of measuring like versus like, the exact nature of the assay method is unimportant. This approach has been applied successfully for several decades since the advent of fibrinolytic treatment, ensuring consistency for potency labeling and the correct dosing of patients. The emergence of generic biosimilar products and new recombinant variants poses a challenge to this system, where functional differences impact on the relative biological activity in different assay systems. A more demanding system of standardization may therefore be required on the basis of international reference materials with associated reference methods. WHO recognizes this, and where possible and practical is seeking to incorporate concepts of traceability, uncertainty, and commutability to International Standards. However, some caution is needed because limitations on the characterization of many complex biologicals remain real, and a flexible approach is required on the basis of real-world needs.

Differential scanning fluorimetry: rapid screening of formulations that promote the stability of reference preparations.

When formulating a biopharmaceutical protein, its stability in the liquid state is critical. In addition, when preparing biological reference materials the stability, both when lyophilised and after reconstitution, needs to be determined. In order to optimise the stability in aqueous conditions (as indicated by Tmelt or denaturation point) the impact of different excipient choices should be evaluated. Micro differential scanning calorimetry is a well established method for these applications but can be time consuming even when an autosampler is used. Differential scanning fluorimetry (DSF) is a novel technique which measures the fluorescence of a dye when bound to the hydrophobic regions of a denatured protein. We have investigated these techniques for their suitability using alpha-1-protease inhibitor (A1PI) as a model system and found similar trends in terms of the impact of different excipients by both methods. DSF is a promising method and has advantages in terms of speed and quantities of biological material required and can be performed using a PCR instrument.

The interplay between tissue plasminogen activator domains and fibrin structures in the regulation of fibrinolysis: kinetic and microscopic studies.

Regulation of tissue-type plasminogen activator (tPA) depends on fibrin binding and fibrin structure. tPA structure/function relationships were investigated in fibrin formed by high or low thrombin concentrations to produce a fine mesh and small pores, or thick fibers and coarse structure, respectively. Kinetics studies were performed to investigate plasminogen activation and fibrinolysis in the 2 types of fibrin, using wild-type tPA (F-G-K1-K2-P, F and K2 binding), K1K1-tPA (F-G-K1-K1-P, F binding), and delF-tPA (G-K1-K2-P, K2 binding). There was a trend of enzyme potency of tPA > K1K1-tPA > delF-tPA, highlighting the importance of the finger domain in regulating activity, but the differences were less apparent in fine fibrin. Fine fibrin was a better surface for plasminogen activation but more resistant to lysis. Scanning electron and confocal microscopy using orange fluorescent fibrin with green fluorescent protein-labeled tPA variants showed that tPA was strongly associated with agglomerates in coarse but not in fine fibrin. In later lytic stages, delF-tPA-green fluorescent protein diffused more rapidly through fibrin in contrast to full-length tPA, highlighting the importance of finger domain-agglomerate interactions. Thus, the regulation of fibrinolysis depends on the starting nature of fibrin fibers and complex dynamic interaction between tPA and fibrin structures that vary over time.

Understanding the enzymology of fibrinolysis and improving thrombolytic therapy.

Cardiovascular disease is responsible for 17 million deaths per year but acute myocardial infarction and stroke can be treated with thrombolytics ("clot busters"), which are plasminogen activators. However, despite many years of study and huge investment from the pharmaceutical industry, clinical trials of new drugs have often been disappointing. Part of the problem may be our incomplete understanding of the regulation of plasminogen activation in vivo. We have developed precise in vitro methods and with the application of computer simulations, we hope to improve our understanding of plasminogen activation to facilitate improvements in thrombolytic therapy.