RESUMEN
A unique fluorescent sensing probe for UO22+ detection was fabricated with terbium-based metal organic frameworks via introducing specific recognition sites (denoted as Tb-TDPAT). The newly formed Tb-TDPAT presented remarkable detection sensitivity and selectivity towards UO22+, surpassing the need for complex post-modification methods.
RESUMEN
Novel brominated flame retardants (NBFRs) have been developed as replacements for legacy brominated flame retardants (BFRs) such as polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs). The prevalence of NBFRs in aquatic environments has initiated intense concerns that they resemble to BFRs. To comprehensively elucidate the fate of NBFRs in aquatic environments, this review summarizes the physico-chemical properties, distribution, bioaccumulation, and fates in aquatic environments. 1,2-bis(2,3,4,5,6-pentabromophenyl) ethane (DBDPE) as the major substitute for PBDEs is the primary NBFR. The release from industrial point sources such as e-waste recycling stations is the dominant way for NBFRs to enter the environment, which results in significant differences in the regional distribution of NBFRs. Sediment is the major sink of NBFRs attributed to the high hydrophobicity. Significantly, there is no decreasing trend of NBFRs concentrations, while PBDEs achieved the peak value in 1970-2000 and decreased gradually. The bioaccumulation of NBFRs is reported in both field studies and laboratory studies, which is regulated by the active area, lipid contents, trophic level of aquatic organisms, and the log KOW of NBFRs. The biotransformation of NBFRs showed similar metabolism patterns to that of BFRs, including debromination, hydroxylation, methoxylation, hydrolysis, and glycosylation. In addition, NBFRs show great potential in trophic magnification along the aquatic food chain, which could pose a higher risk to high trophic-level species. The passive uptake by roots dominates the plant uptake of NBFRs, followed by acropetal and basipetal bidirectional transportation between roots and leaves in plants. This review will provide the support to understand the current pollution characteristics of NBFRs and highlight perspectives for future research.
Asunto(s)
Monitoreo del Ambiente , Retardadores de Llama , Éteres Difenilos Halogenados , Hidrocarburos Bromados , Contaminantes Químicos del Agua , Retardadores de Llama/metabolismo , Retardadores de Llama/análisis , Contaminantes Químicos del Agua/análisis , Contaminantes Químicos del Agua/metabolismo , Éteres Difenilos Halogenados/metabolismo , Éteres Difenilos Halogenados/análisis , Hidrocarburos Bromados/metabolismo , Hidrocarburos Bromados/análisis , BioacumulaciónRESUMEN
Perfluorooctanesulfonic acid potassium salt (PFOS) residues in ecosystems over long periods are of increasing concern and require a selective and stable optical probe for monitoring. Herein, two functional groups (-F and -NH2) with opposite electronic modulation ability were introduced into Fe/Zn-BDC (denoted as Fe/Zn-BDC-F4 and Fe/Zn-BDC-NH2, respectively) to tailor the coordination environment of the Fe metal center, further regulating the nanozyme activity efficiently. Notably, the peroxidase-like activity is related to the coordination environment of the nanozymes and obeys the following order Fe/Zn-BDC-F4 > Fe/Zn-BDC > Fe/Zn-BDC-NH2. Based on the excellent peroxidase-like activity of Fe/Zn-BDC-F4 and the characteristics of being rich in F atoms, a rapid, selective, and visible colorimetric method was developed for detecting PFOS with a detection limit of 100 nM. The detection mechanism was attributed to various interaction forces between Fe/Zn-BDC-F4 and PFOS, including electrostatic interactions, Fe-S interactions, Fe-F bonds, and halogen bonds. This work not only offers new insights into the atomic-scale rational design of highly active nanozymes but also presents a novel approach to detecting PFOS in environmental samples.
Asunto(s)
Ecosistema , Potasio , Colorimetría , Peroxidasas , ZincRESUMEN
Uranyl ions (UO22+) are recognized as important indicators for monitoring sudden nuclear accidents. However, the interferences coexisting in the complicated environmental matrices impart serious constraints on the reliability of current on-site monitoring methods. Herein, a novel ratiometric method for the highly sensitive and selective detection of UO22+ is reported based on a [Eu(diaminoterephthalic acid)] (Eu-DATP) metal-organic framework. Benefiting from the unique chemical structure of Eu-DATP, energy transfer from DATP to UO22+ was enabled, resulting in the up-regulated fluorescence of UO22+ and the simultaneous down-regulated fluorescence of Eu3+. The limit of detection reached as low as 2.7 nM, which was almost 2 orders of magnitude below the restricted limit in drinking water set by the United States Environmental Protection Agency (130 nM). The Eu-DATP probe showed excellent specificity to UO22+ over numerous interfering species, as the intrinsic emissions of UO22+ were triggered. This unprecedentedly high selectivity is especially beneficial for monitoring UO22+ in complicated environmental matrices with no need for tedious sample pretreatment, such as filtration and digestion. Then, by facilely equipping a Eu-DATP-based sampler on a drone, remotely controlled sampling and on-site analysis in real water samples were realized. The concentrations of UO22+ were determined to be from 16.5 to 23.5 nM in the river water of the Guangzhou downtown area, which was consistent with the results determined by the gold-standard inductively coupled plasma mass spectrometry. This study presents a reliable and convenient method for the on-site analysis of UO22+.
RESUMEN
Monitoring the residual dichlorvos (O,O-dimethyl-O-2,2-dichlorovinylphosphate, DDVP) in food has received extensive attention owing to its large consumption in agriculture. However, the previous sensing methods are not time-efficient enough due to the long incubation time for enzyme inhibition (tens of minutes to hours) or bottlenecked by the complicated procedures for senor fabrication. Herein, a novel sensing strategy is proposed based on the hydrolysis of DDVP into PO43-. By using alkaline phosphatase for hydrolysis, a certain portion of DDVP was transformed to PO43- within only 8 min. Then, the released PO43- was detected by a fluorescent terbium metal-organic framework (Tb-MOF). The coordination of the naked P-O groups to the metal nodes of the Tb-MOF disturbed the antenna effects of its ligands. Thus, DDVP was quantified by the decrease of the fluorescence of Tb ions. Based on this method, DDVP residues on plum surfaces were collected by swabs and successfully detected. The recovery of DDVP was determined in the range from 105 % to 115 %, demonstrating the quantification accuracy of this method. The detection limit reached 4.7 µM, which was lower than the restricted amount in fruit set by the National Standard of China. The present method provides an efficient and user-friendly way for the detection of DDVP and many other organophosphorus pesticides in food.
RESUMEN
Carbon-driven persulfate (PDS)-based Fenton-like reactions have been widely viewed as prospective strategies to cope with the water pollution. However, high cost, harsh condition and complex modification processes are usually required to boost the catalytic activities of carbocatalysts. Herein, we proposed an ultrafast, energy-efficient, and convenient approach to convert various low-performance carbon materials into highly efficient catalysts by microwave treatment in just 1 min without any other tedious treatment. This process only requires 57 kJ/g energy input, 5 orders of magnitude lower than the traditional calcination process. The catalytic performance of microwave-treated materials could increase by more than 380 times, which is even better than those of the single-atom catalysts. Moreover, DFT calculations and QSARs analyses reveal that the negatively charged carboxyl group is not conducive to the adsorption of PDS (S2O82-) due to electrostatic repulsion, and also increases the work function of the carbocatalysts, which hinders the electron transfer process.
RESUMEN
Despite the excellent luminescent properties of lanthanide clusters (LnCs), their suprastructures that inherit their characteristic luminescent properties are scarcely reported. Herein, novel and highly luminescent suprastructures are synthesized via a two-step assembly method to incorporate LnCs in covalent organic frameworks (COFs). COFs are pre-synthesized and decorated with rigid anchoring groups on their nanochannel walls, which provide one-dimensional confined spaces for the subsequent in situ assembly of luminescent LnCs. The confined LnCs are termed nanoparticles (NPs) to distinguish them from the pure LnCs. Secondary micropores with predictable sizes are successfully formed between the walls of the nanochannels and the orderly aligned NPs therein. By using a small organic ligand that can efficiently sensitize Ln(iii) cations in the assembly processes, the obtained composites show high quantum yields above 20%. The fluorescence can even be effectively maintained across nine pH units. The secondary micropores further enable the unambiguous discrimination of six methinehalides and ultrasensitive detection of uranyl ions. This study provides a new type of luminescent material that has potential for sensing and light emitting.
RESUMEN
A novel composite was fabricated by hybridizing terbium 1,3,5-benzenetricarboxylic MOF (TB-MOF) with Cx[6]. The obtained composite TB-Cx[6] possessed long-term stability and dispersion stability and was used for on-site analysis of the anti-COVID-19 disinfection product Prednis via a combing remote sampling technique.
Asunto(s)
Elementos de la Serie de los Lantanoides , Estructuras Metalorgánicas , Calixarenos , Preparaciones Farmacéuticas , Fenoles , TerbioRESUMEN
Carbon quantum dots (CQDs) are highly promising to be applied in light-emitting, chemosensing, and other cutting-edge domains. Herein, we successfully fabricate high-quality full-color CQDs under unprecedentedly low temperature and pressure (85°C, 1.88 bar). Stable and narrow fluorescent emissions ranging from blue to green and red light were realized by simple amine engineering, which were further mixed into white-light CQDs with the absolute photoluminescent quantum yield reaching 19.2%. The average mass yield of the CQDs reached 69.0%. The optical performances demonstrated that the CQDs possessed uniform luminescent centers and dominant radiative decay channels. Component analysis further suggested that dehydrated condensation between carboxyl and amine groups directed the growth of the CQDs. By utilizing the CQDs, full-color light-emitting diodes and logic gate sensors were developed. This study paves an important step for promoting the application of CQDs by providing an energy-efficient, safe, and productive synthetic strategy.
RESUMEN
Perfluorinated alkyl substances (PFASs) were ubiquitously in the surface and groundwater. It is crucial and urgent to develop a rapid and ultrasensitive analysis method for the quantification of trace-level PFASs. Herein, a highly hydrophobic sorbent by capping phenylsilane groups on the surfaces of NH2-UiO-66(Zr) nanocrystals was used for efficient solid-phase microextraction (SPME) of PFASs in water samples. It was found that the superficially capped nanocrystals (NH2-UiO-66(Zr)-hp) exhibited both faster extraction kinetics and higher enrichment capacity than the non-capped nanocrystals. The extraction of eleven kinds of PFASs by NH2-UiO-66(Zr)-hp fiber reached equilibrium in 20 min. The enrichment factors of the NH2-UiO-66(Zr)-hp fiber ranged from 6.5 to 48, with a preference for long-chain PFASs over short-chain PFASs. It was proposed that superficial capping eliminated competitive moisture adsorption on the surfaces of the non-capped nanocrystals, thus facilitating the adsorption of PFASs through hydrophobic interaction. By using this new sorbent, the limits of detection of the SPME method as low as 0.035 to 0.616 ng·L-1 were achieved for the target PFASs. The recoveries of PFASs in the environmental water samples were 80.9%-120%. This study presents a new strategy for developing an efficient sorbent for PFASs by surface hydrophobic modification.
Asunto(s)
Estructuras Metalorgánicas , Ácidos Ftálicos , Contaminantes Químicos del Agua , Estructuras Metalorgánicas/química , Microextracción en Fase Sólida/métodos , Contaminantes Químicos del Agua/análisisRESUMEN
The design and synthesis of novel high-performance solid phase microextraction (SPME) coatings towards organic pollutants with diverse chemical properties is still a challenge in sample preparation. Herein, a stable chitosan cross-linked graphene oxide (GOCS) aerogel was reported as a novel coating for solid phase microextraction. The interpenetrated meso- and macropores ensured the large surface area and high accessibility of the functional groups across the aerogel, resulting in high extraction performance towards target hydrophobic pollutants. The extraction capacities of the GOCS-coated SPME fiber towards analytes (e.g. polycyclic aromatic hydrocarbons, organophosphorus pesticides, organochlorine pesticides, pyrethroids, and polychlorinated biphenyls) were about 0.5-13 times as high as those obtained by the commercial fibers (30 µm polydimethylsiloxane (PDMS), 65 µm polydimethylsiloxane/divinylbenzene (PDMS/DVB)), which was attributed to the hydrophobic, π-π, halogen bond and hydrogen bond interactions between the coating and the analytes. Under the optimized extraction conditions, superior analytical performances for PAHs were achieved with a wide linearity (0.5-1000 ng L-1), high enhancement factors (311-3740), and the low limits of detection (0.03-1.28 ng L-1). Finally, the GOCS-coated SPME fiber was successfully applied to the determination of PAHs in real water samples with good recoveries (91.6%-110%).
Asunto(s)
Quitosano , Contaminantes Ambientales , Plaguicidas , Grafito , Compuestos Organofosforados , Microextracción en Fase SólidaRESUMEN
Owing to the ubiquitous occurrence and chemotoxicity of BTEX (benzene, toluene, ethylbenzene and xylene), the development of stable and accurate analysis methods that can assess environment risks and can generate monitoring data rapidly is urgent. In this work, a new strategy was proposed for efficient detection of BTEX. By creatively utilizing thermal deposition method, a robust SPME fiber was fabricated, where the γCD-MOF acted as the adsorbent, while PDMS functionalized as the adhesive and protective coating. Benefiting from the protection of PDMS, the γCD-MOF fiber presented significantly better extraction performance and exhibited long-term structural stabilities in aqueous or methanol samples up to a week. The stable and improved properties of γCD-MOF demonstrated that the PDMS protected the MOF components from the adverse effects of solvent. The detection limits of PDMS modified γCD-MOF fiber for BTEX was as low as 0.13-0.29 ng L-1 that accompanied with wide linear range of 1-1000 ng L-1, which was significantly superior to commercial PDMS fiber and other MOF-based fibers. Besides, the feasibility of the proposed method was verified by the quantitative determination of BTEX in real water samples. This work presents an effective strategy for creating ultrasensitive and stable SPME fibers based on γCD-MOF for applications in aqueous samples or other poor solvent.
Asunto(s)
Microextracción en Fase Sólida , Contaminantes Químicos del Agua , Benceno/análisis , Tolueno/análisis , Contaminantes Químicos del Agua/análisis , Xilenos/análisisRESUMEN
The monitoring of mercury and fluoride ions (Hg2+ and F-) has aroused wide concerns owing to the high toxicity of Hg2+ and the duplicitous nature of F- to human health. As far as we known, more than 100 million people in poverty-stricken areas are still at high risk of being over-exposed to Hg2+ and F- via drinking water. Simple and cost-effective luminescent methods are highly promising for on-site water monitoring in rural areas. However, the development of multipurpose luminescent probes that are accurate and sensitive remains challenging. Herein, a new strategy for rationally designing a multipurpose ratiometric probe is present. The obtained probe is consisted of two emission units with energy transfer between them, which exhibit high coordination affinities to the two coexisted toxic targets (Hg2+ and F-), respectively. Thus, two distinct routes for efficiently modulating the energy transfer in the probe are present to trigger the responses to the two targets in sequence. By detecting the shift of the emission color with a smartphone, an on-site water monitoring method is successfully established with the detection limits as low as 2.7 nM for Hg2+ and 1.9 µM for F-. The present study can expend the toolbox for water monitoring in rural regions.
Asunto(s)
Colorantes Fluorescentes , Mercurio , Transferencia de Energía , Fluoruros , Humanos , AguaRESUMEN
Herein, a new strategy to increase the sensitivity of a lanthanide metal-organic framework (Ln-MOF) to UO22+ was proposed by using polymeric ligands. By utilizing [Tb(1,3,5-benzenetrisbenzoate)]n (Tb-TBT) MOF as the host, preloaded 2-vinyl terephthalic acid (VTP) was polymerized in situ, which produced a novel fluorescent composite denoted as PVTPâTb-TBT. Benefiting from the coordination of PVTP to the Tb nodes, the polymeric chains performed both as molecular scaffolds that improved the water stability of the framework and as additional antennae that sensitized the photoluminescence of the Tb nodes. More importantly, the detection sensitivity and selectivity of PVTPâTb-TBT to UO22+ were much improved compared to those of Tb-TBT. Detailed characterizations indicated that the incorporation of PVTP efficiently enriched UO22+ in the probe, which promoted the energy dissipation to UO22+. Besides, UO22+ was also supposed to release PVTP from PVTPâTb-TBT and, thus, exposed the open metal sites to water molecules, which interrupted the sensitization effect of PVTP and induced a nonradiative energy dissipation. A limit of detection (LOD) as low as 0.75 nm was recorded by suspending the PVTPâTb-TBT probe in a water sample, far below the limit in drinking water set by the United States Environmental Protection Agency (130 nm). Furthermore, a remotely controlled sampling and an on-site analysis of real water samples were realized by facilely loading PVTPâTb-TBT on thin films (TFs). The LOD for UO22+ was 2.5 nm by using the TFs. This study reports a new strategy for boosting the sensitivity and selectivity of Ln-MOF to monitor UO22+ and expands the application of the strategy to an on-site analysis.
Asunto(s)
Elementos de la Serie de los Lantanoides , Estructuras Metalorgánicas , Ligandos , Polímeros , RadioisótoposRESUMEN
Solid-phase extraction (SPE) is a popular technique for environmental sample pretreatment. However, SPE usually requires complex sample pretreatment processes, which is time-consuming and inconvenient for real-time and on-site monitoring. Herein, a solvent-free, rapid, and user-friendly SPE device was developed by coating the polydimethylsiloxane (PDMS)/divinylbenzene (DVB) sorbent on the inner wall of a sample bottle. The extraction process and desorption process were both carried out in the bottle. The analytes trapped in the sorbent were thermally desorbed and simultaneously sucked out from the bottle by an air sampling tube equipped on field-portable GC-MS. Different to previous work, the sample pretreatment process didn't require any complicated and time-consuming steps, such as centrifugation or filtration. The total analysis time for each sample was less than 25 min, which was feasible for rapid on-site detection, and thus avoided the losses and contamination of samples in conventional sample storage and transportation processes. Under optimal conditions, the proposed SPE method exhibited wide linear ranges, low detection limits (0.010-0.036 µg L-1, which were much lower than the maximum levels restricted by the US Environmental Protection Agency and the Chinese GB3838-2002 standard), good intra-bottle repeatability (6.13-7.17%, n = 3) and satisfactory inter-bottle reproducibility (4.73-6.47%, n = 3). Finally, the method was successfully applied to the rapid detection of BTEX in the field. The recoveries of BTEX in spiked water samples ranged from 89.1% to 116.2%. This work presents a novel SPE approach for rapid on-site monitoring in water samples.
RESUMEN
Currently, nano-titanium dioxide (nTiO2) is considered an emerging environmental contaminant. Bottlenecked by the traditional destructive and lethal sampling methods, nTiO2's effect in living plants is poorly investigated. Here, in vivo tracing of endogenous salicylic acids at regular intervals was performed by using solid phase microextraction (SPME) technique for evaluating the effects of nTiO2 on plants. By planting aloe in soil containing varying amounts of nTiO2, the titanium (Ti) element accumulated in the leaves to concentrations and then reached the maximum of 1.1 ± 0.4 µg/g after nTiO2 exceeding 0.1 g/kg. The levels of salicylic acid (SA) and acetylsalicylic acid (ASA) were up-regulated upon the exposure to nTiO2, while were positively correlated to the contents of Ti. Moreover, the increased malondialdehyde, decreased total superoxide dismutase and fluctuated glutathione along with the addition of nTiO2 demonstrated the oxidative stress caused by nTiO2. Meanwhile, apparent growth indicators including leaf elongation, plant fresh weight and root development were influenced, which further confirmed the toxicity of nTiO2 imparted on aloe. This study presents the possibility of using salicylic acids as biomarkers for revealing the toxicity of nTiO2 on plants in addition to the other biomarkers and biomass data, and the in vivo SPME technique is powerful for their monitoring.
Asunto(s)
Nanopartículas , Salicilatos , Biomarcadores , Estrés Oxidativo , Titanio/toxicidadRESUMEN
The secretion disorder of sex hormones is the source that leads to the occurrence of many diseases such as polycystic ovarian syndrome (PCOS), hyperandrogenism and so on. There exist physiological changes in human body when slight fluctuations in concentrations of sex hormones happen. Therefore, it's of great significance for accurate detection of sex hormones in human body. In this work, TpPa-1 COF solid-phase microextraction (SPME) fiber was prepared using high-efficient in-situ synthesis strategy and coupled with HPLC-MS/MS to detect three sex hormones, including Progesterone (P), testosterone (T) and dehydroepiandrosterone (DHEA) in human serum. The thickness of the coating reached 7 µm within 2 h. Under the optimal conditions, the established method presented low limit of detections (LODs, ≤ 0.75 ng/mL), wide linear ranges (0.100-100 ng mL-1) and good reproducibility, and three sex hormones (T, P, DHEA) were successfully detected and quantified in human serum. In conclusion, the established SPME method presented high-efficient fiber preparation and good analytical performances of sex hormone detection, therefore was in great potential for application in clinical.
Asunto(s)
Microextracción en Fase Sólida , Espectrometría de Masas en Tándem , Cromatografía Líquida de Alta Presión , Hormonas Esteroides Gonadales , Humanos , Reproducibilidad de los ResultadosRESUMEN
The photoluminescent (PL) properties of lanthanide metal-organic frameworks (Ln-MOFs) are intrinsically subtle to water molecules, which remains the major challenge that severely limits their applications as fluorescent probes in aqueous samples. Herein novel composite fluorescent probes were prepared by growing Ln-MOFs (Tb-MOF, Eu-MOF, and Tb/Eu-MOF) on carboxylated porous graphene oxide (PGO-COOH). The 3D thorny composites presented significantly longer fluorescent lifetimes and higher quantum yields than that of the bare Ln-MOFs and exhibited long-term PL stabilities in aqueous samples up to 15 days. The stable and improved PL properties demonstrated that the highly hybrid composite structures protected the MOF components from the adverse effects of water. Furthermore, the unexpected antenna effect of the PGO-COOH substrate on Ln3+ was supposed to be another reason for the improved PL properties. The composites present ultralow detection limits as low as 5.6 nM for 2,4-dinitrotoluene and 2.3 nM for dipicolinic acid as turn-off and ratiometric fluorescent probes, respectively, which was attributed to the incoporation of PGO-COOH that dramatically enahnced inner filter effects and effectively protected the energy transfer process in the MOF components from the interference of the surrounding water. This work presents an effective strategy for creating ultrasensitive and stable fluorescent probes based on Ln-MOFs for applications in aqueous samples.
RESUMEN
Headspace solid-phase microextraction (HS-SPME) of low volatile analytes from complex aqueous samples can be substantially facilitated by elevating the temperature of the samples. However, many SPME coatings prepared from novel sorptive materials may suffer from low stabilities in hot water steam. Herein, a superhydrophobic metal-organic framework (MOF) derived from decorating the metal-oxo nodes of the amino-functionalized UiO-66(Zr) with phenylsilane was prepared and successfully developed into a novel SPME fiber coating. The highest extraction efficiencies towards the semi-volatile ultraviolet (UV) filters were achieved when the aqueous samples were heated up to 100 °C. It was notable that the lab-made coating exhibited extraordinary stability towards hot water steam, probably because the hydrophobic groups capped on the MOF prevented water molecules from entering and deconstructing its lattice. Even after being treated with water steam under 100 °C for 21 h, the extraction performance of the coating remained unchanged, and the crystal structure of the MOF maintained. Furthermore, a negligible matrix effect was observed even in the samples containing humic acid. Under the optimal extraction and thermal desorption conditions, a method for determining UV filters in aqueous samples was established, which possessed low detection limits (0.6-2.1 ng L-1), wide linear ranges (10-50000 ng L-1), good inter-fiber reproducibility (2.3-6.0%, n = 6), and satisfying intra-fiber repeatability (1.8-5.8%, n = 3). The method was successfully applied in quantifying UV filters in environmental water samples. In addition, the lab-made NH2-UiO-66(Zr)-shp-coated fiber was also suitable for the analysis of polycyclic aromatic hydrocarbons (PAHs). This study provided an effective strategy for preparing MOF coatings that can maintain their crystalline structures and high extraction performances in high-temperature steam.
RESUMEN
Stimulus-responsive double-ligand luminol-Eu-IPA infinite coordination polymer nanoparticles (luminol-Eu-IPA CPNPs) were prepared as a ratiometric fluorescence probe for highly selective detecting Hg2+. The CPNPs were constituted of Eu3+ as the nuclear metal coordinated by isophthalic acid (IPA) together with luminol as an auxiliary ligand. The photoinduced electron transfer (PET) occurring from IPA to luminol prevented the antenna effect between IPA and Eu3+, leading to the quench fluorescence of Eu3+ under light excitation. As Hg2+ has a high affinity to N atom of luminol and the spin-orbit coupling effect, spectroscopically and magnetically silent properties, the fluorescence intensity of luminol was quenched. Meanwhile, the PET effect between luminol and IPA was interrupted under the presence of Hg2+. This process resulted in a significant decrease in the fluorescence intensity of luminol and a significant increase in the fluorescence intensity of Eu3+. Therefore, the fluorescence ratiometric detection of Hg2+ was performed by monitoring the ratio of the fluorescence at 617 nm of Eu3+ to that at 430 nm of luminol. The linear range was from 0.05 to 20 µM with a detection limit as low as 13.2 nM Hg2+ (S/N = 3). Due to the fluorescence of luminol be quenched and the effect of PET be disrupted simultaneously, the probe exhibiting excellent detection selectively can avoid false positive signals, which was demonstrated for monitoring mercury ions in real water samples. Precision in positioning ligands in CPNPs is an advantage to achieve high specificity in comparison to traditional organic dendrimers or precious metal nanomaterials.