RESUMEN
A system and method for non-destructive detection of cracks of different width and depths based on digital speckle interferometry coupled with pulsed laser excitation is introduced and tested. Based on photoacoustic effect, acoustic waves are induced onto the rear of the samples by pumping a pulsed laser beam on it. The generated mechanical wave propagates from the rear surface of the sample to the front while front surface is monitored by speckle interferometry. In order to acquire information about surface deformation, the front surface is illuminated by continuous wave laser and interference are imaged onto the camera as speckle images. After processing the produced fringe patterns, it indicates the presence and location of the cracks in qualitative way. In this study, the system and method mentioned above are validated by detecting medium density fiberboard with simulated cracks. The fringe patterns from areas with or without defects are compared and discussed. Besides, the system and method to distinguish and predict cracks sizes is proposed and validated.
RESUMEN
This review concerns the challenges and perspectives of on-site non-invasive measurements applied to wall mosaics. Wall mosaics, during the centuries, decorated numerous buildings, nowadays being part of world cultural heritage. The preservation and maintenance of these valuable decorations are undoubtedly directly dependent on identifying possible problems that could affect their hidden structure. On-site non-invasive methods, using different contact or no-contact technologies, can offer support in this specific field of application. The choice of the appropriate technique or combination of different techniques depends, in general, on the depth of investigation, the resolution, the possibility to have direct contact with the surfaces or, on the contrary, limited accessibility of the wall mosaics due to their location (e.g., vaults), as well as deterioration problems, (e.g., voids, detachments, or humidity effects). This review paper provides a brief overview of selected recent studies regarding non-invasive methods applied to the analysis of wall mosaics. This review, discussing the assessment of advantages and limitations for each method here considered, also considers possible future developments of imaging techniques in this specific context for cultural heritage applications.
RESUMEN
Relative humidity (RH) changes are a natural environmental effect that forces organic materials to a constant cycle of achieving equilibrium. The present work is part of an ongoing research based on the hypothesis that the inevitable deleterious effects of the RH natural cycle may be prevented or minimized if a deformation threshold is assigned to each monitored endangered object prior to exposure to structural damage. In this paper the characterization of the behavior of a softwood sample (1.0 cm thick) submitted to RH abrupt cycles has been performed, in terms of mass and rate of displacement of the surface. The exemplary study is based on the concept of recording the RH impact directly from the material surface, allowing us to identify diversity in reaction with time, which in turn could determine the onset of structural changes prior to irreversible damage. The RH impact is measured as surface deformation from interference fringes, using a custom-made real time holography system with interferometric precision termed digital holographic speckle-pattern interferometry (DHSPI). The main observations presented here are a hysteresis in the dynamic sorption isotherm and a greater rate of displacement during the drying. A long-term experiment was performed to identify signs of ageing of the sample. The evolution of the mass and the rate of displacement stayed similar, an offset with an interesting behavior was observed and highlights ageing of wood. In order to produce a future preventive model for distinct art objects it is necessary to determine a deformation threshold for each material. In this context the study was planned to continue with organic samples bearing variable density and thickness under longer-term RH cycles and monitoring until the samples show visible signs of irreversible damage.
RESUMEN
This paper presents first laboratory results of a combined approach carried out by the use of three different portable non-invasive electromagnetic methods: Digital holographic speckle pattern interferometry (DHSPI), stimulated infrared thermography (SIRT) and holographic subsurface radar (HSR), proposed for the analysis of a custom-built wall mosaic model. The model reproduces a series of defects (e.g., cracks, voids, detachments), simulating common deteriorated, restored or reshuffled areas in wall mosaics. DHSPI and SIRT, already well known in the field of non-destructive (NDT) methods, are full-field contactless techniques, providing complementary information on the subsurface hidden discontinuities. The use of DHSPI, based on optical imaging and interferometry, provides remote control and visualization of surface micro-deformation after induced thermal stress, while the use of SIRT allows visualization of thermal energy diffusion in the surface upon the induced thermal stress. DHSPI and SIRT data are complemented by the use of HSR, a contact method that provides localized information about the distribution of contrasts in dielectric permittivity and related possible anomalies. The experimental results, made by the combined use of these methods to the identification of the known anomalies in the mosaic model, are presented and discussed here as a contribution in the development of an efficient non-invasive approach to the in-situ subsurface analysis of ancient wall mosaics.
RESUMEN
With this study, we propose a method to image the tip crack on transparent materials by using digital holographic microscopy. More specifically, an optical system based on Mach-Zehnder interference along with an inverted microscopy (Olympus CKX53) was used to image the tip crack of Dammar Varnish transparent material under thermal excitation. A series of holograms were captured and reconstructed for the observation of the changes of the tip crack. The reconstructed holograms were also compared temporally to compute the temporal changes, showing the crack propagation phenomena. Results show that the Dammar Varnish is sensitive to the ambient temperature. Our research demonstrates that digital holographic microscopy is a promising technique for the detection of the fine tip crack and propagation in transparent materials.
RESUMEN
Environmental control in galleries and museums is a necessity and is informed by the knowledge of ongoing processes of deterioration which can threaten the integrity and stability of artworks. Invisible dimensional changes in many works of art occur following environmental fluctuations as materials respond to the changes in humidity and temperature. The constant influence of dimensional changes usually remains invisible until displacement generates visible deterioration and irreversible damage. This paper exploits fully non contact coherent interferometry in a sequential masking procedure for visualising and studying surface deformation which is the direct effect of dimensional alterations induced by humidity changes. Surface deformation during dimensional displacements of constituent materials may occur on any artwork within an unstable environment. In this context, the presented research study explores the diagnostic potential of fully non contact sensors for the direct structural assessment of environmental effects as they occur in real time on works of art. The method is employed to characterise material responses, complementing and improving understanding of material behaviour in unstable environments.
RESUMEN
Techniques based on laser interferometry principles provide great potential to retrieve imperceptible bulk information regarding the physical and mechanical condition of complex and inhomogeneous structures. This review presents the progress in and prospects for optical coherent interferometry techniques in artwork conservation applications, in particular concerning the performance of the developed instrumentations and methodologies. Each of the state-of-the-art techniques is introduced by reference to fundamental principles, basic equations and general optical geometry. In this context, a brief introduction to fundamental principles governing the optical coherent interferometry measurements is presented prior to discussion on performance. Some exemplary results demonstrating that bulk interferometric signals can be obtained from rough artwork surfaces are shown and their suitability is reviewed. Several opportunities for art conservation research and applications are summarised and discussed.