Sociodemographic, biological, and timing characteristics of dental caries and fluorosis using mixed-type cluster analysis on 12-year-olds in Ho Chi Minh city, 1989-2019.

Objectives: In 1990, Ho Chi Minh City started Community water fluoridation (CWF) at 0.7 ppm F, and in 2000, it was adjusted to 0.5 ppm F. Here, we analyzed dental caries and fluorosis data in Ho Chi Minh City to explore commonalities associated with CWF among 12-year-old children. Methods: Dental caries and fluorosis data were collected in 1989, 2003, 2012, and 2019 (N = 4773). Trained dentists scored dental caries using the WHO detection criteria and fluorosis using Dean's Fluorosis Index. We used these data and the k-prototypes method by the R package to identify clusters of participants with shared clinical and water fluoride levels. Results: We used datasets 1 (4773 participants) and 2 (4194 participants, missing fluorosis data in 1989). K-prototypes analysis identified three clusters in each dataset. Cluster 1, with 80 % of the sample at 0.5 ppm F area characterized by low caries and fluorosis scores. Cluster 2 with 60 % of the sample non-fluoridated area had high caries and low fluorosis scores. Cluster 3, with 75 % of the sample in 0.7 ppm area, had low caries but borderline high fluorosis scores. Conclusion: Identifying three clusters based on clinical and environmental scores supports the decision to fluoridate the water to prevent caries (0-0.7 ppm) and the shift from 0.7 to 0.5 ppm to keep the caries preventive effect while reducing the risk of fluorosis. Clinical significance: Our results support the effectiveness of CWF in preventing dental caries and the appropriateness of changing the F concentration to reduce the risk of fluorosis while maintaining its effectiveness.

A simple and precise alignment calibration method for cone-beam computed tomography with the verifications.

Cone-beam Computed Tomography (CBCT) is widely used in dental imaging, small animal imaging, radiotherapy, and non-destructive industrial inspection. The quality of CBCT images depends on the precise knowledge of the CBCT system's alignment. We introduce a distinct procedure, "precision alignment loop (PAL)", to calibrate any CBCT system with a circular trajectory. We describe the calibration procedure by using a line-beads phantom, and how PAL determines the misalignments from a CBCT system. PAL also yields the uncertainties in the simulated calibration to give an estimate of the errors in the misalignments. From the analytical simulations, PAL can precisely obtain the source-to-rotation axis distance (SRD), and the geometric center G, "the point in z-axis meets the detector", where the z-axis is coincident with the line from the X-ray source that intersects the axis of the rotation (AOR) orthogonally. The uncertainties of three misalignment angles of the detector are within ±0.05°, which is close to ±0.04° for the results of Yang et al. [18], but our method is easy and simple to implement. Our distinct procedure, on the other hand, yields the calibration of a micro-CT system and an example of reconstructed images, showing our calibration method for the CBCT system to be simple, precise, and accurate.

Influence of titanium dioxide and composite on the accuracy of an intraoral scanner for bilateral upper posterior edentulous jaw (Kennedy class I) scanning: An in vitro study.

OBJECTIVES: The accuracy of 3-dimensional images produced by the intraoral scanner (IOS) is affected by scanning-aid materials. This in vitro study aimed to elucidate the influence of scanning-aid materials on the accuracy (trueness and precision) of digital scanning on the bilateral upper posterior edentulous jaw (Kennedy class I). METHODS: The asymmetrical bilateral upper posterior edentulous model (reference model) was generated using a 3D printer with three groups (application of TiO2 powder - composite and no-treatment control). The experimental scans were executed (n = 10 per group) using TRIOS3 (3shape), while one reference scan was obtained by an industrial scanner (Solutionix - C500). Values of trueness and precision were evaluated using the 3D superimposition method on mean deviation values. The accuracy was assessed using mean deviation values following the 3D superimposition method. RESULTS: IOS had high trueness (20.6 µm), and significant differences were found between the no-treatment and TiO2 groups. Considering the cut-off value of deviations as 300 µm for clinical acceptability, the analysis clarified the most variations in the control group. There was a significant difference between the no-treatment group and others in the maxillary tuberosity area relating to long-span edentulous. The composite group had the best precision values (1.1 µm). Significant differences were found between composite and TiO2 groups (2.7 µm). CONCLUSIONS: The bilateral upper posterior edentulous jaw digital impressions obtained using IOS were accurate. However, the digital images in the palate and maxillary tuberosity area related to long-span edentulous differed significantly. TiO2-containing powder and composite landmarks affected the accuracy and stability of the IOS. CLINICAL SIGNIFICANCE: Scanning aid materials can increase the accuracy of the bilateral upper posterior edentulous jaw scanning with IOS.

Effects of core buildup composite resin translucency on intraoral scanner accuracy: an in vitro study.

AIM: The accuracy of 3D images produced by an intraoral scanner (IOS) is affected by the optical characteristics of restorative materials such as metal, ceramic, and composite resin. The present in vitro study aimed to investigate the impact of core buildup composite resin translucency on IOS accuracy. MATERIALS AND METHODS: A core buildup procedure was performed on a proprietary 3D-printed model using injectable composite resins in four groups with different levels of translucency (highest to lowest: AE, A3, AO3, and EX). Ten experimental scans per group were performed using a Medit i700 IOS on a phantom head-mounted model. Reference scans were obtained using an industrial scanner (Solutionix C500). Values of accuracy (trueness and precision) for the respective groups were evaluated using mean deviation values following 3D superimposition. RESULTS: Composite resin translucency caused the scale reduction of the optical impressions. Values of trueness showed the highest scale reduction in AE, significantly, followed by A3, AO3, and EX. Considering 50 µm as the cut-off value of deviations for clinical acceptability, the analysis showed most deviations in AE and A3. Similar results were found with precision, where AE showed the highest deviation value statistically, followed by A3, AO3, and EX. CONCLUSIONS: Composite resin translucency affects the accuracy of optical impressions, causing a fitting error of CAD/CAM prostheses. The more translucent the composite resin, the less accurate the optical impression. This suggests the need for proper compensation during prosthesis designing for an optimal clinical result. In addition, practitioners should indicate in the digital workflow the proper restorative materials regarding not only the mechanical properties and esthetics, but also the optical characteristics.

Effects of food hardness on temporomandibular joint osteoarthritis: Qualitative and quantitative micro-CT analysis of rats in vivo.

BACKGROUND: Temporomandibular joint osteoarthritis (TMJ-OA) is a degenerative joint disease in which quantitative analysis based on magnetic resonance image (MRI) or cone-beam computed tomography (CBCT) remains limited. Moreover, the long-term effects of soft food on the adaptive condylar remodeling process in TMJ-OA remain unclear. This study aimed to assess the effects of food hardness on adaptive condylar remodeling in a healthy TMJ, TMJ-OA, and controlled TMJ-OA. METHODS: Complete Freund's adjuvant (CFA) was used for TMJ-OA induction and Link-N (LN) for TMJ repair. Eighteen mature rats were randomly divided into six groups: (1) control/normal diet (Ctrl-N); (2) control/soft diet (Ctrl-S); (3) TMJ-OA/normal diet (CFA-N); (4) TMJ-OA/soft diet (CFA-S); (5) Link-N-controlled TMJ-OA/normal diet (LN-N); and (6) Link-N-controlled TMJ-OA/soft diet (LN-S). Micro-CT was performed 14, 21, and 28 days after CFA injection to analyze the bone volume, bone volume fraction (BVF), bone mineral density (BMD), and trabecular bone number and thickness (Tb.N, Tb.Th). MRI and histological imaging were performed to support the analysis. RESULTS: Under CFA treatment, the BVF and BMD decreased significantly (p < 0.01) and later recovered to normal. However, more significant improvements occurred in normal-diet groups than soft-diet groups. Additionally, bone volume changes were more predictable in the normal-diet groups than in the soft-diet groups. The normal-diet groups presented a significant decrease and increase in the Tb.N and Tb.Th, respectively (p < 0.05), while the Tb.N and Tb.Th in the soft-diet groups remained largely unchanged. Furthermore, a significantly higher frequency of irregularities on the condylar articular surface was found in the soft-diet groups. CONCLUSIONS: Compared with a soft diet, a normal diet may be beneficial for preserving condyle articular surface and directing bone remodeling in TMJ-OA rats.