RESUMEN
In this study, ram impacts at 5.5 m/s are simulated through finite element analysis in order to study the mechanical response of the brain. A calibrated internal state variable inelastic constitutive model was implemented into the finite element code to capture the brain behavior. Also, constitutive models for the horns were calibrated to experimental data from dry and wet horn keratin at low and high strain rates. By investigating responses in the different keratin material states that occur in nature, the bounds of the ram brain response are quantified. An acceleration as high as 607 g's was observed, which is an order of magnitude higher than predicted brain injury threshold values. In the most extreme case, the maximum tensile pressure and maximum shear strains in the ram brain were 245 kPa and 0.28, respectively. Because the rams do not appear to sustain injury, these impacts could give insight to the threshold limits of mechanical loading that can be applied to the brain. Following this motivation, the brain injury metric values found in this research could serve as true injury metrics for human head impacts.
Asunto(s)
Lesiones Encefálicas , Encéfalo , Aceleración , Animales , Fenómenos Biomecánicos , Análisis de Elementos Finitos , Cabeza , Humanos , Masculino , Ovinos , Estrés MecánicoRESUMEN
This paper investigates the effects of moisture, anisotropy, stress state, and strain rate on the mechanical properties of the bighorn sheep (Ovis Canadensis) horn keratin. The horns consist of fibrous keratin tubules extending along the length of the horn and are contained within an amorphous keratin matrix. Samples were tested in the rehydrated (35wt% water) and ambient dry (10wt% water) conditions along the longitudinal and radial directions under tension and compression. Increased moisture content was found to increase ductility and decrease strength, as well as alter the stress state dependent nature of the material. The horn keratin demonstrates a significant strain rate dependence in both tension and compression, and also showed increased energy absorption in the hydrated condition at high strain rates when compared to quasi-static data, with increases of 114% in tension and 192% in compression. Compressive failure occurred by lamellar buckling in the longitudinal orientation followed by shear delamination. Tensile failure in the longitudinal orientation occurred by lamellar delamination combined with tubule pullout and fracture. The structure-property relationships quantified here for bighorn sheep horn keratin can be used to help validate finite element simulations of ram's impacting each other as well as being useful for other analysis regarding horn keratin on other animals. STATEMENT OF SIGNIFICANCE: The horn of the bighorn sheep is an anisotropic composite composed of keratin that is highly sensitive to moisture content. Keratin is also found in many other animals in the form of hooves, claws, beaks, and feathers. Only one previous study contains high rate experimental data, which was performed in the dry condition and only in compression. Considering the bighorn sheep horns' protective role in high speed impacts along with the moisture and strain rate sensitivity, more high strain rate data is needed to fully characterize and model the material. This study provides high strain rate results demonstrating the effects of moisture, anisotropy, and stress state. As a result, the comprehensive data allows modeling efforts to be greatly improved.
Asunto(s)
Cuernos/química , Humedad , Queratinas/química , Estrés Mecánico , Animales , Anisotropía , Fenómenos Biomecánicos , Fuerza Compresiva , Cuernos/ultraestructura , Procesamiento de Imagen Asistido por Computador , Borrego Cimarrón , Estadística como Asunto , Resistencia a la TracciónRESUMEN
The present study, through finite element simulations, shows the geometric effects of a bioinspired solid on pressure and impulse mitigation for an elastic, plastic, and viscoelastic material. Because of the bioinspired geometries, stress wave mitigation became apparent in a nonintuitive manner such that potential real-world applications in human protective gear designs are realizable. In nature, there are several toroidal designs that are employed for mitigating stress waves; examples include the hyoid bone on the back of a woodpecker's jaw that extends around the skull to its nose and a ram's horn. This study evaluates four different geometries with the same length and same initial cross-sectional diameter at the impact location in three-dimensional finite element analyses. The geometries in increasing complexity were the following: (1) a round cylinder, (2) a round cylinder that was tapered to a point, (3) a round cylinder that was spiraled in a two dimensional plane, and (4) a round cylinder that was tapered and spiraled in a two-dimensional plane. The results show that the tapered spiral geometry mitigated the greatest amount of pressure and impulse (approximately 98% mitigation) when compared to the cylinder regardless of material type (elastic, plastic, and viscoelastic) and regardless of input pressure signature. The specimen taper effectively mitigated the stress wave as a result of uniaxial deformational processes and an induced shear that arose from its geometry. Due to the decreasing cross-sectional area arising from the taper, the local uniaxial and shear stresses increased along the specimen length. The spiral induced even greater shear stresses that help mitigate the stress wave and also induced transverse displacements at the tip such that minimal wave reflections occurred. This phenomenon arose although only longitudinal waves were introduced as the initial boundary condition (BC). In nature, when shearing occurs within or between materials (friction), dissipation usually results helping the mitigation of the stress wave and is illustrated in this study with the taper and spiral geometries. The combined taper and spiral optimized stress wave mitigation in terms of the pressure and impulse; thus providing insight into the ram's horn design and woodpecker hyoid designs found in nature.