RESUMEN
Ralstonia eutropha strain H16 is a chemoautotrophic bacterium that oxidizes hydrogen and accumulates poly[(R)-3-hydroxybutyrate] [P(3HB)], a prominent polyhydroxyalkanoate (PHA), within its cell. R. eutropha utilizes fructose or CO2 as its sole carbon source for this process. A PHA-negative mutant of strain H16, known as R. eutropha strain PHB-4, cannot produce PHA. Strain 1F2, derived from strain PHB-4, is a leucine analog-resistant mutant. Remarkably, the recombinant 1F2 strain exhibits the capacity to synthesize 3HB-based PHA copolymers containing 3-hydroxyvalerate (3HV) and 3-hydroxy-4-methyvalerate (3H4MV) comonomer units from fructose or CO2. This ability is conferred by the expression of a broad substrate-specific PHA synthase and tolerance to feedback inhibition of branched amino acids. However, the total amount of comonomer units incorporated into PHA was up to around 5 mol%. In this study, strain 1F2 underwent genetic engineering to augment the comonomer supply incorporated into PHA. This enhancement involved several modifications, including the additional expression of the broad substrate-specific 3-ketothiolase gene (bktB), the heterologous expression of the 2-ketoacid decarboxylase gene (kivd), and the phenylacetaldehyde dehydrogenase gene (padA). Furthermore, the genome of strain 1F2 was altered through the deletion of the 3-hydroxyacyl-CoA dehydrogenase gene (hbdH). The introduction of bktB-kivd-padA resulted in increased 3HV incorporation, reaching 13.9 mol% from fructose and 6.4 mol% from CO2. Additionally, the hbdH deletion resulted in the production of PHA copolymers containing (S)-3-hydroxy-2-methylpropionate (3H2MP). Interestingly, hbdH deletion increased the weight-average molecular weight of the PHA to over 3.0 × 106 on fructose. Thus, it demonstrates the positive effects of hbdH deletion on the copolymer composition and molecular weight of PHA.
RESUMEN
Polyhydroxyalkanoates (PHAs), aliphatic polyesters synthesized by microorganisms, have gained considerable attention as biodegradable plastics. Recently, α-carbon-methylated PHAs have been shown to exhibit several interesting properties that differ from those of conventional PHAs, such as their crystallization behavior and material properties. This study investigated α-carbon methylated (S)- and (R)-3-hydroxy-2-methylpropionate (3H2MP) as new repeating units. 3H2MP units were homopolymerized or copolymerized with (R)-3-hydroxybutyrate (3HB) by manipulating the culture conditions of recombinant Escherichia coli LSBJ. Consequently, PHAs with 3H2MP units ranging from 5 to 100 mol % were synthesized by external addition of (R)- and (S)-enantiomers or the racemic form of 3H2MPNa. The (S)-3H2MP precursor supplemented into the culture medium was almost directly polymerized into PHA while maintaining its chirality. Therefore, a highly isotactic P(3H2MP) (R:S = 1:99) was synthesized, which displayed a melting temperature of 114-119 °C and a relatively high enthalpy of fusion (68 J/g). In contrast, in cultures supplemented with (R)-3H2MP, the precursor was racemized and polymerized into PHA, resulting in the synthesis of the amorphous polymer atactic P(3H2MP) (R:S = 40:60). However, racemization was not observed at a low concentration of the (R)-3H2MP precursor, thereby synthesizing P(3HB-co-8 mol % 3H2MP) with 100% (R)-3H2MP units. The thermogravimetric analysis revealed that the thermal degradation temperatures at 5% weight loss of P(3H2MP)s occurred at approximately 313 °C, independent of tacticity, which is substantially higher than that of P(3HB) (257 °C). This study demonstrates a new concept for controlling the physical properties of biosynthesized PHA by manipulating the polymers' tacticity using 3H2MP units.
Asunto(s)
Polihidroxialcanoatos , Polihidroxialcanoatos/química , Poliésteres/metabolismo , Hidroxibutiratos , Temperatura , Escherichia coli/genética , Escherichia coli/metabolismo , Carbono/metabolismoRESUMEN
IMPORTANCE: Polyhydroxyalkanoate (PHA) is a highly biodegradable microbial polyester, even in marine environments. In this study, we incorporated an enrichment culture-like approach in the process of isolating marine PHA-degrading bacteria. The resulting 91 isolates were suggested to fall into five genera (Alloalcanivorax, Alteromonas, Arenicella, Microbacterium, and Pseudoalteromonas) based on 16S rRNA analysis, including two novel genera (Arenicella and Microbacterium) as marine PHA-degrading bacteria. Microbacterium schleiferi (DSM 20489) and Alteromonas macleodii (NBRC 102226), the type strains closest to the several isolates, have an extracellular poly(3-hydroxybutyrate) [P(3HB)] depolymerase homolog that does not fit a marine-type domain composition. However, A. macleodii exhibited no PHA degradation ability, unlike M. schleiferi. This result demonstrates that the isolated Alteromonas spp. are different species from A. macleodii. P(3HB) depolymerase homologs in the genus Alteromonas should be scrutinized in the future, particularly about which ones work as the depolymerase.
Asunto(s)
Polihidroxialcanoatos , Pseudoalteromonas , Polihidroxialcanoatos/metabolismo , ARN Ribosómico 16S/genética , Bahías , Agua de Mar , Pseudoalteromonas/genéticaRESUMEN
Polyhydroxyalkanoate (PHA) synthases (PhaCs) are key enzymes in PHA polymerization. PhaCs with broad substrate specificity are attractive for synthesizing structurally diverse PHAs. In the PHA family, 3-hydroxybutyrate (3HB)-based copolymers are industrially produced using Class I PhaCs and can be used as practical biodegradable thermoplastics. However, Class I PhaCs with broad substrate specificities are scarce, prompting our search for novel PhaCs. In this study, four new PhaCs from the bacteria Ferrimonas marina, Plesiomonas shigelloides, Shewanella pealeana, and Vibrio metschnikovii were selected via a homology search against the GenBank database, using the amino acid sequence of Aeromonas caviae PHA synthase (PhaCAc), a Class I enzyme with a wide range of substrate specificities, as a template. The four PhaCs were characterized in terms of their polymerization ability and substrate specificity, using Escherichia coli as a host for PHA production. All the new PhaCs were able to synthesize P(3HB) in E. coli with a high molecular weight, surpassing PhaCAc. The substrate specificity of PhaCs was evaluated by synthesizing 3HB-based copolymers with 3-hydroxyhexanoate, 3-hydroxy-4-methylvalerate, 3-hydroxy-2-methylbutyrate, and 3-hydroxypivalate monomers. Interestingly, PhaC from P. shigelloides (PhaCPs) exhibited relatively broad substrate specificity. PhaCPs was further engineered through site-directed mutagenesis, and the variant resulted in an enzyme with improved polymerization ability and substrate specificity.
RESUMEN
In this study, 2-hydroxy-4-methylthiobutyrate (2H4MTB)-containing polyhydroxyalkanoate (PHA) copolymers were biosynthesized using methionine as the 2H4MTB precursor. 2H4MTB is a novel monomer unit that contains a sulfur atom in its side chain. The 2H4MTB-containing PHA was biosynthesized by functionalizing the leucine degradation and PHA synthesis pathways in recombinant Escherichia coli. The 2H4MTB fraction in the PHA copolymer was increased up to 30.6 mol% by increasing the methionine concentration in the medium. Using purified polymers containing 10.9 mol% 2H4MTB unit, the sulfide group of the 2H4MTB side chain was oxidized with hydrogen peroxide or peracetic acid, which resulted in the conversion of sulfide to sulfoxide and sulfone groups. The oxidized polymer was relatively hydrophilic, as revealed by water contact angle measurements, and swelled slightly when soaked in water. These results suggest that the 2H4MTB unit can be used as an oxidation site to impart hydrophilicity to the PHA copolymers.
Asunto(s)
Polihidroxialcanoatos , Polihidroxialcanoatos/metabolismo , Aciltransferasas/metabolismo , Oxidación-Reducción , Metionina/metabolismo , Racemetionina/metabolismo , Poliésteres/químicaRESUMEN
Polyhydroxyalkanoates (PHAs) are eco-friendly plastics that are thermoplastic and biodegradable in nature. The hydrogen-oxidizing bacterium Ralstonia eutropha can biosynthesize poly[(R)-3-hydroxybutyrate] [P(3HB)], the most common PHA, from carbon dioxide using hydrogen and oxygen as energy sources. In conventional autotrophic cultivation using R. eutropha, a gas mixture containing 75−80 vol% hydrogen is supplied; however, a gas mixture with such a high hydrogen content has a risk of explosion due to gas leakage. In this study, we aimed to develop an efficient cell culture system with a continuous supply of a non-combustible gas mixture (H2: O2: CO2: N2 = 3.8: 7.3: 13.0: 75.9) for safe autotrophic culture to produce P(3HB) by hydrogen-oxidizing bacteria, with a controlled hydrogen concentration under a lower explosive limit concentration. When the gas mixture was continuously supplied to the jar fermentor, the cell growth of R. eutropha H16 significantly improved compared to that in previous studies using flask cultures. Furthermore, an increased gas flow rate and agitation speed enhanced both cell growth and P(3HB) production. Nitrogen source deficiency promoted P(3HB) production, achieving up to 2.94 g/L P(3HB) and 89 wt% P(3HB) content in the cells after 144 h cultivation. R. eutropha NCIMB 11599, recombinant R. eutropha PHB-4, and Azohydromonas lata grew in a low-hydrogen-content gas mixture. R. eutropha H16 and recombinant R. eutropha PHB-4 expressing PHA synthase from Bacillus cereus YB-4 synthesized P(3HB) with a high weight-average molecular weight of 13.5−16.9 × 105. Thus, this autotrophic culture system is highly beneficial for PHA production from carbon dioxide using hydrogen-oxidizing bacteria as the risk of explosion is eliminated.
RESUMEN
Poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] [P(3HB-co-3HHx)] has a high potential to serve as a commercial bioplastic due to its biodegradability, thermoplastic and mechanical properties. The properties of this copolymer are greatly affected by the composition of 3HHx monomer. One of the most efficient ways to modulate the composition of 3HHx monomer in P(3HB-co-3HHx) is by manipulating the (R)-3HHx-CoA monomer supply. In this study, a new (R)-specific enoyl-CoA hydratase originating from a non-PHA producer, Streptomyces sp. strain CFMR 7 (PhaJSs), was characterized and found to be effective in supplying 3HHx monomer during in vivo production of P(3HB-co-3HHx) copolymer. The P(3HB-co-3HHx) copolymer produced from the Cupriavidus necator transformant that harbors phaJSs, PHB-4/pBBR1-CBP-M-CPF4JSs, showed enhanced 3HHx incorporation of up to 11 mol% without affecting the P(3HB-co-3HHx) production when palm oil was used as the carbon source. In addition, both kcat and kcat/Km of PhaJSs were higher toward the C6 than the shorter C4 substrates, underscoring the preference for 3-hydroxyhexanoyl-CoA. These results suggest that PhaJSs has a significant ability to supply 3HHx monomers for PHA biosynthesis via ß-oxidation and can be applied for metabolic engineering of robust PHA-producing strains.
Asunto(s)
Cupriavidus necator , Streptomyces , Ácido 3-Hidroxibutírico/metabolismo , Caproatos/metabolismo , Carbono/metabolismo , Coenzima A/metabolismo , Cupriavidus necator/metabolismo , Enoil-CoA Hidratasa/metabolismo , Aceite de Palma/metabolismo , Streptomyces/metabolismoRESUMEN
Poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] [P(3HB-co-3HHx)] is a practical kind of bacterial polyhydroxyalkanoates (PHAs). A previous study has established an artificial pathway for the biosynthesis of P(3HB-co-3HHx) from structurally unrelated sugars in Ralstonia eutropha, in which crotonyl-CoA carboxylase/reductase (Ccr) and ethylmalonyl-CoA decarboxylase (Emd) are a key combination for generation of butyryl-CoA and the following chain elongation. This study focused on the installation of the artificial pathway into Escherichia coli. The recombinant strain of E. coli JM109 harboring 11 heterologous genes including Ccr and Emd produced P(3HB-co-3HHx) composed of 14 mol% 3HHx with 41 wt% of dry cellular weight from glucose. Further investigations revealed that the C6 monomer (R)-3HHx-CoA was not supplied by (R)-specific reduction of 3-oxohexanoyl-CoA but by (R)-specific hydration of 2-hexenoyl-CoA formed through reverse ß-oxidation after the elongation from C4 to C6. While contribution of the reverse ß-oxidation to the conversion of the C4 intermediates was very limited, crotonyl-CoA, a precursor of butyryl-CoA, was generated by dehydration of (R)-3HB-CoA. Several modifications previously reported for enhancement of bioproduction in E. coli were examined for the copolyester synthesis. Elimination of the global regulator Cra or PdhR as well as the block of acetate formation resulted in poor PHA synthesis. The strain lacking RNase G accumulated more PHA but with almost no 3HHx unit. Introduction of the phosphite oxidation system for regeneration of NADPH led to copolyester synthesis with the higher cellular content and higher 3HHx composition by two-stage cultivation with phosphite than those in the absence of phosphite.
RESUMEN
A new polythioester (PTE), poly(3-mercapto-2-methylpropionate) [P(3M2MP)], and its copolymer with 3-hydroxybutyrate (3HB) were successfully biosynthesized from 3-mercapto-2-methylpropionic acid as a structurally-related precursor. This is the fourth PTE of biological origin and the first to be α-methylated. P(3M2MP) was biosynthesized using an engineered Escherichia coli LSBJ, which has a high molecular weight, amorphous structure, and elastomeric properties, reaching 2600% elongation at break. P(3HB-co-3M2MP) copolymers were synthesized by expressing 3HB-supplying enzymes. The copolymers were produced with high content in the cells and showed a high 3M2MP unit incorporation of up to 77.2 wt% and 54.8 mol%, respectively. As the 3M2MP fraction in the copolymer increased, the molecular weight decreased and the polymers became softer, more flexible, and less crystalline, with lower glass transition temperatures and higher elongations at break. The properties of this PTE were distinct from those of previously biosynthesized PTEs, indicating that the range of material properties can be further expanded by introducing α-methylated thioester monomers.
RESUMEN
Poly(3-hydroxybutyrate) [P(3HB)] is the most representative polyhydroxyalkanoate (PHA), which is a storage polyester for prokaryotic cells. P(3HB)-producing recombinant Escherichia coli secretes diethylene glycol (DEG)-terminated 3HB oligomers (3HBO-DEG) through a PHA synthase-mediated chain transfer and alcoholysis reactions with externally added DEG. The purpose of this study was to optimize the culture conditions for the secretory production of 3HBO-DEG with jar fermenters. First, the effects of culture conditions, such as agitation speed, culture temperature, culture pH, and medium composition on 3HBO-DEG production, were investigated in a batch culture using 250-ml mini jar fermenters. Based on the best culture conditions, a fed-batch culture was conducted by feeding glucose to further increase the 3HBO-DEG titer. Consequently, the optimized culture conditions were reproduced using a 2-L jar fermenter. This study successfully demonstrates a high titer of 3HBO-DEG, up to 34.8 g/L, by optimizing the culture conditions, showing the feasibility of a new synthetic strategy for PHA-based materials by combining secretory oligomer production and subsequent chemical reaction.
RESUMEN
The biodegradable polyester poly-(R)-3-hydroxybutyrate [P(3HB)] is synthesized by a polymerizing enzyme called polyhydroxyalkanoate (PHA) synthase and accumulates in a wide variety of bacterial cells. Recently, we demonstrated the secretory production of a (R)-3HB oligomer (3HBO), a low-molecular-weight P(3HB), by using recombinant Escherichia coli expressing PHA synthases. The 3HBO has potential value as an antibacterial substance and as a building block for various polymers. In this study, to construct an efficient 3HBO production system, the coexpression of molecular chaperones and a PHA synthase derived from Bacillus cereus YB-4 (PhaRCYB4) was examined. First, genes encoding enzymes related to 3HBO biosynthesis (phaRCYB4, phaA and phaB derived from Ralstonia eutropha H16) and two types of molecular chaperones (groEL, groES, and tig) were introduced into the E. coli strains BW25113 and BW25113ΔadhE. As a result, coexpression of the chaperones promoted the enzyme activity of PHA synthase (approximately 2-3-fold) and 3HBO production (approximately 2-fold). The expression assay of each chaperone and PHA synthase subunit (PhaRYB4 and PhaCYB4) indicated that the combination of the two chaperone systems (GroEL-GroES and TF) supported the folding of PhaRYB4 and PhaCYB4. These results suggest that the utilization of chaperone proteins is a valuable approach to enhance the formation of active PHA synthase and the productivity of 3HBO.
RESUMEN
A high-throughput screening method based on the degree of polymerization (DP) of polyhydroxyalkanoate (PHA) was developed using high-performance liquid chromatography (HPLC). In this method, PHA production was achieved using recombinant Escherichia coli supplemented with benzyl alcohol as a chain terminal compound. The cultured cells containing benzyl alcohol-capped PHA were decomposed by alkaline treatment, and the peaks of the decomposed monomer and benzyl alcohol were detected using HPLC. The DP of PHA could be determined from the peak ratio of the decomposed monomer to terminal benzyl alcohol. The measured DP was validated by other instrumental analyses using purified PHA samples. Using this system, mutants of PHA synthase from Bacillus cereus YB-4 (PhaRCYB4) were screened, and some enzymes capable of producing PHA with higher DP than the wild-type enzyme were obtained. The PHA yields of two of these enzymes were equivalent to the yield of the wild-type enzyme. Therefore, this screening method is suitable for the selection of beneficial mutants that can produce high molecular weight PHAs.
RESUMEN
With the aid of a chain transfer (CT) reaction, hydroxyalkanoate (HA) oligomers can be secreted by recombinant Escherichia coli carrying the gene encoding a lactate-polymerizing enzyme (PhaC1PsSTQK) in Luria-Bertani (LB) medium supplemented with a carbon source and CT agent. In this study, HA oligomers were produced through microbial secretion using a mineral-based medium instead of LB medium, and the impact of medium composition on HA oligomer secretion was investigated. The focused targets were medium composition and NaCl concentration related to osmotic conditions. It was observed that 4.21 g/L HA oligomer was secreted by recombinant E. coli in LB medium, but the amount secreted in the mineral-based modified R (MR) medium was negligible. However, when the MR medium was supplemented with 5 g/L yeast extract, 3.75 g/L HA oligomer was secreted. This can be accounted for by the enhanced expression and activity of PhaC1PsSTQK upon supplementation with growth-activated nutrients as supplementation with yeast extract also promoted cell growth and intracellular growth-associated polymer accumulation. Furthermore, upon adding 10 g/L NaCl to the yeast extract-supplemented MR medium, HA oligomer secretion increased to 6.86 g/L, implying that NaCl-induced osmotic pressure promotes HA oligomer secretion. These findings may facilitate the secretory production of HA oligomers using an inexpensive medium.
Asunto(s)
Medios de Cultivo/análisis , Escherichia coli/metabolismo , Polihidroxialcanoatos/biosíntesis , Polimerizacion , Escherichia coli/química , Microorganismos Modificados Genéticamente/química , Microorganismos Modificados Genéticamente/metabolismoRESUMEN
Polyhydroxyalkanoate (PHA) synthase is an enzyme that polymerizes the acyl group of hydroxyacyl-coenzyme A (CoA) substrates. Aeromonas caviae PHA synthase (PhaCAc) is an important biocatalyst for the synthesis of a useful PHA copolymer, poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] [P(3HB-co-3HHx)]. Previously, a PhaCAc mutant with double mutations in asparagine 149 (replaced by serine [N149S]) and aspartate 171 (replaced by glycine [D171G]) was generated to synthesize a 3HHx-rich P(3HB-co-3HHx) and was named PhaCAc NSDG. In this study, to further increase the 3HHx fraction in biosynthesized PHA, PhaCAc was engineered based on the three-dimensional structural information of PHA synthases. First, a homology model of PhaCAc was built to target the residues for site-directed mutagenesis. Three residues, namely tyrosine 318 (Y318), serine 389 (S389), and leucine 436 (L436), were predicted to be involved in substrate recognition by PhaCAc. These PhaCAc NSDG residues were replaced with other amino acids, and the resulting triple mutants were expressed in the engineered strain of Ralstonia eutropha for application in PHA biosynthesis from palm kernel oil. The S389T mutation allowed the synthesis of P(3HB-co-3HHx) with an increased 3HHx fraction without a significant reduction in PHA yield. Thus, a new workhorse enzyme was successfully engineered for the biosynthesis of a higher 3HHx-fraction polymer.
RESUMEN
Poly((R)-3-hydroxybutyrate) (P(3HB)) is a polyester that is synthesized and accumulated in many prokaryotic cells. Recently, a new culture method for the secretion of the intracellularly synthesized (R)-3-hydroxybutyrate oligomer (3HBO) from recombinant Escherichia coli cells was developed. In this study, we attempted to produce microbial 3HBO capped with a diethylene glycol terminal (3HBO-DEG) as a macromonomer for polymeric materials. First, we prepared recombinant E. coli strains harboring genes encoding various polyhydroxyalkanoate (PHA) synthases (PhaC, PhaEC or PhaRC) that can incorporate chain transfer (CT) agents such as DEG into the polymer's terminal and generate CT end-capped oligomers. To this end, each strain was cultivated under DEG supplemental conditions, and the synthesis of 3HBO-DEG was confirmed. As a result, the highest secretory production of 3HBO-DEG was observed for the PHA synthase derived from Bacillus cereus YB-4 (PhaRCYB4). To evaluate the usability of the secreted 3HBO-DEG as a macromonomer, 3HBO-DEG was purified from the culture medium and polymerized with 4,4'-diphenylmethane diisocyanate as a spacer compound. Characterization of the polymeric products revealed that 3HBO-based polyurethane was successfully obtained and was a flexible and transparent noncrystalline polymer, unlike P(3HB). These results suggested that microbial 3HBO-DEG is a promising platform building block for synthesizing polyurethane and various other polymers.
Asunto(s)
Ácido 3-Hidroxibutírico/biosíntesis , Aciltransferasas/genética , Bacillus cereus/genética , Escherichia coli/genética , Glicoles de Etileno/metabolismo , Poliuretanos/química , Poliuretanos/síntesis química , Ácido 3-Hidroxibutírico/análisis , Ácido 3-Hidroxibutírico/química , Aciltransferasas/metabolismo , Cromatografía en Gel , Medios de Cultivo , Escherichia coli/metabolismo , Glicoles de Etileno/química , Isocianatos/química , Espectroscopía de Resonancia Magnética , Espectrometría de Masas , Microorganismos Modificados Genéticamente , Vías Secretoras/genética , Espectroscopía Infrarroja por Transformada de Fourier , TermografíaRESUMEN
OBJECTIVES: To autotrophically produce polyhydroxyalkanoate (PHA) by Ralstonia eutropha without the risk of gas explosion, the feasibility of using a non-combustible gas mixture with low hydrogen content was investigated. RESULTS: A non-combustible gas mixture (H2: O2: CO2: N2 = 3.6: 7.6: 12.3: 76.5) was used for a 144-hour flask cultivation of two R. eutropha strains. Initially, using strain H16, the production conditions for poly(3-hydroxybutyrate) [P(3HB)] were explored by examining nutrient deficiency. Of these, a nitrogen source-deficient culture medium yielded the highest polymer content of 70 wt% in cells. Next, to produce PHA copolymer, the recombinant strain 1F2 was cultured under the nitrogen source-deficient autotrophic condition. As a result, the accumulation of 3HB-based copolymer containing of 1.2 mol% 3-hydroxyvalerate unit and 1.2 mol% 3-hydroxy-4-methylvalerate unit was observed with 57 wt% of the cell content. CONCLUSIONS: The use of a non-combustible gas with low hydrogen content is beneficial for PHA production in eliminating the risk of explosion due to hydrogen leakage.
Asunto(s)
Dióxido de Carbono/metabolismo , Cupriavidus necator , Hidrógeno/metabolismo , Polihidroxialcanoatos/biosíntesis , Procesos Autotróficos , Cupriavidus necator/genética , Cupriavidus necator/metabolismo , Ingeniería MetabólicaRESUMEN
The engineered chimeric polyhydroxyalkanoate (PHA) synthase PhaCAR is composed of N-terminal portion of Aeromonas caviae PHA synthase and C-terminal portion of Ralstonia eutropha (Cupriavidus necator) PHA synthase. PhaCAR has a unique and useful capacity to synthesize the block PHA copolymer poly(2-hydroxybutyrate-block-3-hydroxybutyrate) [P(2HB-b-3HB)] in engineered Escherichia coli from exogenous 2HB and 3HB. In the present study, we initially attempted to incorporate the amino acid-derived 2-hydroxyalkanoate (2HA) units using PhaCAR and the 2HA-CoA-supplying enzymes lactate dehydrogenase (LdhA) and CoA transferase (HadA). Cells harboring the genes for PhaCAR, LdhA, and HadA, as well as for the 3HB-CoA-supplying enzymes ß-ketothiolase and acetoacetyl-CoA reductase, were cultivated with supplementation of four hydrophobic amino acids, i.e., leucine, valine (Val), isoleucine (Ile), and phenylalanine, in the medium. No hydrophobic amino acid-derived monomers were incorporated into the polymer, which was most likely because of the strict substrate specificity of PhaCAR; however, P(2HB-co-3HB) was unexpectedly produced with Val supplementation. The copolymer was likely P(2HB-b-3HB) based on proton nuclear magnetic resonance analysis. Based on the endogenous pathways in E. coli, 2HB units are likely derived from threonine (Thr) through deamination and dihydroxylation. In fact, dual supplementation with Thr and Val showed synergy on the 2HB fraction of the polymer. Val supplementation promoted the 2HB synthesis likely by inhibiting the metabolism of 2-ketobutyrate into Ile and/or activating Thr dehydratase. In conclusion, the LdhA/HadA/PhaCAR pathway served as the system for the synthesis of P(2HB-b-3HB) from biomass-derived carbon sources.
Asunto(s)
Ácido 3-Hidroxibutírico/metabolismo , Aciltransferasas/metabolismo , Escherichia coli/metabolismo , Hidroxibutiratos/metabolismo , Aciltransferasas/genética , Escherichia coli/genética , Treonina/metabolismo , Valina/metabolismoRESUMEN
Polyhydroxyalkanoate (PHA) synthases catalyze the polymerization reaction of the acyl moiety of hydroxyacyl-coenzyme A into polyester. The catalytic subunit PhaC of PHA synthase has the PhaC box sequence at the active site that is typically described as G-X-C-X-G-G (X is an arbitrary amino acid), and cysteine is an active center. In this study, an amino acid replacement was introduced into the PhaC box of the PHA synthase derived from Ralstonia eutropha (PhaCRe ) to investigate the importance of highly conserved residues in polymerizing activity. Point mutagenesis revealed that PhaCRe mutants with the expanded PhaC box sequence ([GAST]-X-C-X-[GASV]-[GA]) are functional PHA synthases. These findings highlight the low mutational robustness of the last glycine residue in the PhaC box as well as that of the active center cysteine.
Asunto(s)
Aciltransferasas/química , Aciltransferasas/metabolismo , Aciltransferasas/genética , Secuencia de Aminoácidos , Dominio Catalítico , Cupriavidus necator/enzimología , MutagénesisRESUMEN
The biodegradable polyester 3-hydroxybutyrate (3HB) polymer [P(3HB)] is intracellularly synthesized and accumulated in recombinant Escherichia coli. In this study, native polyhydroxyalkanoate (PHA) synthases are used to attempt to microbially secrete 3HB homo-oligomers (3HBOs), which are widely distributed in nature as physiologically active substances. High secretory production is observed, especially for the two PHA synthases from Aeromonas caviae and Bacillus cereus YB4. Surprisingly, an ethyl ester at the carboxy terminus (ethyl ester form) of 3HBOs is identified for most of the PHA synthases tested. Next, 3HBOs with a functional carboxyl group (carboxyl form of 3HBO) are obtained by using the alcohol dehydrogenase gene (adhE)-deficient mutant strain, suggesting that the endogenous ethanol produced in E. coli acts as a chain transfer (CT) agent in the generation of 3HBOs. Furthermore, an in vitro polymerization assay reveals that CT agents such as ethanol and free 3HB are involved in the generation of ethyl ester and carboxyl form of 3HBO, respectively. The microbial platform established herein allows the secretion of 3HBOs with desirable end structures by supplementation with various CT agents. The obtained 3HBOs and their end-capped forms may be used as physiologically active substances and building blocks for polymeric materials.
Asunto(s)
Ácido 3-Hidroxibutírico/biosíntesis , Ácido 3-Hidroxibutírico/química , Aciltransferasas/metabolismo , Polihidroxialcanoatos/biosíntesis , Polihidroxialcanoatos/química , Ácido 3-Hidroxibutírico/aislamiento & purificación , Aciltransferasas/genética , Aeromonas caviae/enzimología , Aeromonas caviae/genética , Alcohol Deshidrogenasa/genética , Bacillus cereus/enzimología , Bacillus cereus/genética , Biodegradación Ambiental , Escherichia coli/genética , Escherichia coli/metabolismo , Etanol/metabolismo , Hidroxibutiratos/química , Peso Molecular , Poliésteres/química , Polimerizacion , Proteínas Recombinantes , Recombinación Genética , Factores de TiempoRESUMEN
Polyhydroxyalkanoates (PHAs) are synthesized by bacteria as an intracellular storage polyester, where PHA synthase (PhaC) catalyzes the polymerization of its substrate hydroxyacyl-coenzyme A (HA-CoA) to form PHA. When PhaC is overexpressed in Escherichia coli, most PhaC protein is produced as insoluble inclusion bodies due to its low aqueous solubility. This study aimed to improve the solubility of Ralstonia eutropha PHA synthase (PhaCRe) by fusing a hydrophilic tag, glutathione S-transferase (GST), to the protein's N-terminus. In in vivo assays, the GST tag had no obvious effect on solubility and enzymatic activity of PhaCRe. However, an in vitro assay revealed that the surface of GST-fused PhaCRe (GST-PhaCRe) had increased hydrophilicity, and tended to form correct PhaCRe dimers when added to the (R)-3-hydroxybutyryl-CoA substrate. Although GST-PhaCRe displayed a long lag phase at the start of a polymerization reaction, granule-associated GST-PhaCRe showed higher catalytic activity than PhaCRe in kinetic analysis. The results are discussed in light of the dimerization mechanisms of PhaCRe.