Phytosterols and γ-Oryzanol as Cholesterol Solid Phase Modifiers during Digestion.

Literature reports that ingestion of phytosterols and γ-oryzanol contributes to cholesterol lowering. Despite in vivo observations, thermodynamic phase equilibria could explain phenomena occurring during digestion leading to such effects. To advance the observations made by previous literature, this study was aimed at describing the complete solid-liquid phase equilibrium diagrams of cholesterol + phytosterol and γ-oryzanol systems by DSC, evaluating them by powder X-ray, microscopy, and thermodynamic modeling. Additionally, this study evaluated the phenomena observed by an in vitro digestibility method. Results confirmed the formation of solid solution in the cholesterol + phytosterols system at any concentration and that cholesterol + γ-oryzanol mixtures formed stable liquid crystalline phases with a significant melting temperature depression. The in vitro protocol supported the idea that the same phenomena can occur during digestion in which mechanochemical forces were probably the mechanisms promoting cholesterol solid phase changes in the presence of such phytocompounds. In this case, these changes could alter cholesterol solubility and possibly its absorption in the gastrointestinal lumen.

Development and Characterization of a Hydrogel Containing Silver Sulfadiazine for Antimicrobial Topical Applications. Part II: Stability, Cytotoxicity and Silver Release Patterns

Abstract Hydrogels are interesting for use in the treatment of topical wounds due to their virtually zero toxicity, and capacity for extended release of pharmaceuticals. Silver sulfadiazine (SSDZ) is the drug of choice in the treatment of skin burns. The aim of the study was to determine cytotoxicity, antimicrobial activity and stability of a PVA hydrogel with integrated silver sulfadiazine. SSDZ-hydrogels were prepared using 10% (w/w) PVA (either 89% or 99% hydrolyzed) and 1% (w/w) silver sulfadiazine. Cellular viability was assessed via MTS assays, antimicrobial activity via disk-diffusion and accelerated stability tests were carried out with analysis at 0, 30, 60, 90 and 180 days of storage at 40 ± 2 °C and a relative humidity of 75 ± 5%. The parameters evaluated included organoleptic characteristics, moisture, swelling ability, mechanical strength, FTIR, XRD, TGA and DSC, and silver release patterns via XRD and potentiometry. Cell viability tests indicated some cytotoxicity, although within acceptable levels. After 90 days of storage, SSDZ hydrogel samples exhibited a brown coloration, probably due to the formation of Ag or Ag2O nanoparticles. The SSDZ-loaded hydrogels suffered visual and physical changes; however, these changes did not compromise its use as occlusive wound dressings or its antimicrobial properties.

Rifle bullets comparison by wavelength dispersive X-ray fluorescence spectroscopy and chemometric analysis.

Despite Federal Bureau of Investigation Laboratory announcing the discontinuation of bullet lead examinations, knowledge of the composition of the bullets has been used as an alternative means of identifying their origin, achieving success in some case studies. In this work, wavelength dispersion X-ray fluorescence (WDXRF) and chemometrics were used for the analysis of rifle bullets, in order to identify the spectral similarities of these samples. For this purpose, 54 lead core fragments from 7.62 mm rifle bullets from 5 different manufacturers were obtained: Companhia Brasileira de Cartuchos (CBC), Israel Military Industries (IMI), Federal Cartridge (FC), Fray Luiz Beltrán (FLB) and Zavod Vlasim (ZV). Principal components analysis (PCA) discriminated the five groups of bullets according to their manufacturers in a three-dimensional scores graph, where 3 principal components accounted for>99% of the variability between the samples. The spectral region for Sb and the scattering region together proved to be determinant for discrimination of the groups. The dendrogram presented in the hierarchical cluster analysis (HCA) showed the formation of five groups. The k-nearest neighbor algorithm (k-NN) and soft independent modeling of class analogy (SIMCA) correctly classified all samples of the test set. X-ray scattering spectrum were used for the first time in the analysis of the fragments and contributed to the grouping of samples from the same manufacturers. The results indicate that the WDXRF technique is suitable for forensic purposes in case studies, as, besides being quick and relatively simple, it has the advantage of preserving evidence.

Bacteriophage-Based Biosensing of Pseudomonas aeruginosa: An Integrated Approach for the Putative Real-Time Detection of Multi-Drug-Resistant Strains.

During the last decennium, it has become widely accepted that ubiquitous bacterial viruses, or bacteriophages, exert enormous influences on our planet's biosphere, killing between 4-50% of the daily produced bacteria and constituting the largest genetic diversity pool on our planet. Currently, bacterial infections linked to healthcare services are widespread, which, when associated with the increasing surge of antibiotic-resistant microorganisms, play a major role in patient morbidity and mortality. In this scenario, Pseudomonas aeruginosa alone is responsible for ca. 13-15% of all hospital-acquired infections. The pathogen P. aeruginosa is an opportunistic one, being endowed with metabolic versatility and high (both intrinsic and acquired) resistance to antibiotics. Bacteriophages (or phages) have been recognized as a tool with high potential for the detection of bacterial infections since these metabolically inert entities specifically attach to, and lyse, bacterial host cells, thus, allowing confirmation of the presence of viable cells. In the research effort described herein, three different phages with broad lytic spectrum capable of infecting P. aeruginosa were isolated from environmental sources. The isolated phages were elected on the basis of their ability to form clear and distinctive plaques, which is a hallmark characteristic of virulent phages. Next, their structural and functional stabilization was achieved via entrapment within the matrix of porous alginate, biopolymeric, and bio-reactive, chromogenic hydrogels aiming at their use as sensitive matrices producing both color changes and/or light emissions evolving from a reaction with (released) cytoplasmic moieties, as a bio-detection kit for P. aeruginosa cells. Full physicochemical and biological characterization of the isolated bacteriophages was the subject of a previous research paper.

Transdermal permeation of bacteriophage particles by choline oleate: potential for treatment of soft-tissue infections.

Aim: A sodium alginate-based biohydrogel was prepared integrating choline oleate deep euthetic solvent as facilitator of transdermal delivery and a cocktail of lytic bacteriophages for Acinetobacter baumannii, aiming at treating soft-tissue infections by the aforementioned pathogen. Materials & methods: Two bacteriophages were isolated from a hospital sewage and a wastewater treatment plant sewage in Sorocaba (Brazil), and characterized via SDS-PAGE electrophoresis, transmission electron microscope and evaluation of lytic spectra of the bacteriophage cocktail. The biohydrogel was prepared and characterized by DSC, FTIR, XRD, DESEM, XRT and transdermal permeation of the bacteriophage cocktail. Results & conclusion: The physico-chemical characterization of the biohydrogel produce indicated adequate structural characteristics and ability to promote/facilitate transdermal delivery of bacteriophage particles, thus showing potential for biopharmaceutical applications.

Non-invasive Transdermal Delivery of Human Insulin Using Ionic Liquids: In vitro Studies.

In this research project, synthesis and characterization of ionic liquids and their subsequent utilization as facilitators of transdermal delivery of human insulin was pursued. Choline geranate and choline oleate ionic liquids (and their deep eutectic solvents) were produced and characterized by nuclear magnetic resonance (1H NMR), water content, oxidative stability, cytotoxicity and genotoxicity assays, and ability to promote transdermal protein permeation. The results gathered clearly suggest that all ionic liquids were able to promote/facilitate transdermal permeation of insulin, although to various extents. In particular, choline geranate 1:2 combined with its virtually nil cyto- and geno-toxicity was chosen to be incorporated in a biopolymeric formulation making it a suitable facilitator aiming at transdermal delivery of insulin.

Phase behavior of cholesterol in mixtures with hypo- and hypercholesterolemic lipids.

Some lipidic bioactives are largely reported to present hypocholesterolemic effects, for example, oleic acid, α-tocopherol, and octacosanol, found in rice-bran, olive, and sunflower oils. In contrast, some saturated and trans-unsaturated lipids found in animal fats or partially hydrogenated oils have been associated with the opposite effect. However, the mechanisms in which these lipids act for lowering or increasing cholesterol are not fully understood. In this context, this work was aimed at a fundamental physicochemical comprehension of how cholesterol phase behavior is affected in mixtures with these compounds. The complete solid-liquid equilibrium (SLE) phase diagrams of these mixtures were depicted by differential scanning calorimetry and microscopy, and also evaluated by the SLE thermodynamic theory. The minimal melting temperature (eutectic points) of the mixtures followed the order: α-tocopherol < oleic acid < elaidic acid < stearic acid < octacosanol. Among all biocompounds, stearic and trans-oleic acids promoted few changes in the normal thermodynamic behavior of cholesterol when in a mixture. In contrast, α-tocopherol induced a significant temperature depression in the system. Furthermore, at high concentrations of cholesterol (>90% molar fraction), the formation of solid solution was observed in all other systems, to a higher degree for oleic acid. The higher interactions of these beneficial compounds and the formation of solid solution that literature associates with the alteration of cholesterol enteric absorption probably correlates with their hypocholesterolemic effects.

First Time Determination of Important Catalyst Sodium Methoxide Used in Biodiesel by Colorimetric Method.

A simple and selective spectrophotometric method has been developed for the first time for the determination of sodium methoxide in methanol solution in the presence of sodium hydroxide. The developed method involves the formation of a pink species by the reaction between sodium methoxide and α-santonin. The pink compound formed shows absorbance maximum at 513 nm. N, N-Dimethylformamide and methanol were used as solvents, and the reaction was performed at different temperatures and 25 °C was selected for further experiments. The pink compound formed was dried and then was studied using FTIR and mass spectrometry. The calibration curve was constructed from 0.10 to 0.30% (m/v) sodium methoxide in methanol, and the standard deviation is 0.010%. Similarly, the relative standard deviations of 28%, 26%, and 24% solutions of sodium methoxide were obtained in the range of 0.4 to 1.9%. The correlation coefficient of the analytical curve r = 0.9997; the limit of detection, LOD, is ca. 1.1 × 10-3 % w/w; and the limit of quantification, LOQ, is ca. 3.2 × 10-3 % w/w. The results of analysis were validated statistically.

Simultaneous determination of six quality parameters of biodiesel through 1H NMR spectroscopy and partial least squares.

Biodiesel quality is checked by determining several parameters. Considering the large number of analyses in this verification, as well as the disadvantages of the use of toxic solvents and waste generation, multivariate calibration is suggested to reduce the number of tests. In this work, hydrogen nuclear magnetic resonance (1H NMR) spectra were used to build multivariate models, from partial least squares (PLS), in order to perform simultaneous determination of six important quality parameters of biodiesel: density at 20°C, kinematic viscosity at 40°C, iodine value, acid number, oxidative stability, and water content. 1H NMR spectrum reflects the structures of the compounds present in biodiesel and showed suitable correlations with the six parameters. In addition, the models were appropriate to predict all parameters for external samples. Thus, the alliance between 1H NMR spectra and PLS was shown to be applicable to extract a lot of information about biodiesel quality, significantly reducing analysis time, reagent and solvent consumption, and waste generation.

Alternative method to quantify biodiesel and vegetable oil in diesel-biodiesel blends through 1H NMR spectroscopy.

An alternative method is proposed for the quantitative analysis of biodiesel in diesel-biodiesel blends. It is based on hydrogen nuclear magnetic resonance (1H NMR) spectroscopy and applies univariate calibration, in which the integrals of the spectra are considered. Statistical comparisons between the results obtained from the method proposed here and from the infrared (IR) spectrometry method, which is recommended by the European Standard EN 14078, show that the 1H NMR method offers equivalent results compared with standard ones. Furthermore, the proposed 1H NMR method recognizes the difference between biodiesel and vegetable oil, whereas the IR method cannot. Therefore, the 1H NMR method developed to quantify biodiesel in diesel-biodiesel blends is proposed here as a more practical and efficient alternative to the official method, because besides quantifying biodiesel in blends, it indicates adulteration with vegetable oil, either as the intentional and illegal addition of this raw material or because of a low degree of transesterification conversion during biodiesel synthesis.

Development of a water-in-oil-in-water multiple emulsion system integrating biomimetic aqueous-core lipid nanodroplets for protein entity stabilization. Part II: process and product characterization.

The aqueous-core enclosed in lipid nanoballoons integrating multiple emulsions of the type water-in-oil-in-water mimic, at least in theory, the environment within viable cells, thus being suitable for housing hydrophilic protein entities such as bioactive proteins, peptides and bacteriophage particles. This study reports a complete physicochemical characterization of optimized biomimetic aqueous-core lipid nanoballoons housing hydrophilic (BSA) protein entities, evolved from a statistical 23×31 factorial design study (three variables at two levels and one variable at three levels) that was the subject of the first paper of a series of three, aiming at complete stabilization of the three-dimensional structure of protein entities attempted via housing the said molecular entities within biomimetic aqueous-core lipid nanoballoons integrating a multiple (W/O/W) emulsion. The statistical factorial design followed led to the production of an optimum W/O/W multiple emulsion possessing quite homogeneous particles with an average hydrodynamic size of (186.2 ± 2.6) nm and average Zeta potential of (-36.5 ± 0.9) mV, and exhibiting a polydispersity index of 0.206 ± 0.014. Additionally, the results obtained for the diffusion coefficient of the lipid nanoballoons integrating the optimized W/O/W multiple emulsion were comparable and of the same order of magnitude (10-12 m2 s-1) as those published by other authors since, typically, diffusion coefficients for molecules range from 10-10 to 10-7 m2 s-1, but diffusion coefficients for nanoparticles are typically of the order of magnitude of 10-12 m2 s-1.

Development and characterization of a hydrogel containing silver sulfadiazine for antimicrobial topical applications.

Development and optimization of a hydrogel with impregnated silver sulfadiazine was pursued, for antimicrobial topical applications. The selected hydrogel exhibited a homogeneous appearance, with whitish colloration and devoid of any fractures or cracks. The content in impregnated silver sulfadiazine was within established limits (1%, w/w) with a standard deviation of up to 1.28%. The hydrogel presented a good characteristic in relation to release of the active antimicrobial principle, verified through swelling tests and antimicrobial activity. The swelling tests indicated a higher increase in weight during the first 6 h of contact with a moist environment, with a maximum value of 266.00 ± 0.81, and with maintenance of the original shape of the hydrogel. The impregnated silver sulfadiazine presented antimicrobial activity, as expected, indicating a prolonged release of the drug. The infrared spectra of the hydrogel with impregnated silver sulfadiazine indicated that the drug did not engage in any bonds with the polymeric matrix, which otherwise could have reduced its antimicrobial activity. The mechanical resistance tests produced good results, indicating that the hydrogels may be utilized in different locations of the human body with skin lesions.

Development and application of a portable instrument for drugs analysis in pharmaceutical preparations

This article describes the application and performance of an inexpensive, simple and portable device for colorimetric quantitative determination of drugs in pharmaceutical preparations. The sensor is a light detector resistor (LDR) incorporated into a black PTFE cell and coupled to a low-cost multimeter (Ohmmeter). Quantitative studies were performed with captopril/p-chloranil/H2O2 and methyldopa/ammonium molybdate systems. Calibration curves were obtained by plotting the electrical resistance of the LDR against the concentration of the colored species in the ranges 1.84 × 10-4 to 1.29 × 10-3mol L-1 and 5.04 × 10-4 to 2.52 × 10-3 mol L-1 for captopril/p-chloranil/H2O2 and methyldopa/ammonium molybdate systems, respectively, exhibiting good coefficients of determination. Statistical analysis of the results obtained showed no significant difference between the proposed methodologies and the official reported methods, as evidenced by the t-test and variance ratio at a 95% confidence level. The results of this study demonstrate the applicability of the instrument for simple, accurate, precise, fast,in situ and low-cost colorimetric analysis of drugs in pharmaceutical products.

Este artigo descreve o desenvolvimento e a aplicação de um dispositivo portátil, simples e barato para a determinação colorimétrica quantitativa de fármacos em formulações farmacêuticas. O sensor é um resistor detector de luz (RDL) colocado numa célula de PTFE e acoplado a um multímetro de baixo custo. Os estudos quantitativos foram realizados utilizando captopril/p-cloranil/H2O2 e metildopa/molibdato de amônio como sistemas reacionais. As curvas de calibração foram obtidas através da representação gráfica da resistência elétrica do RDL contra a concentração dos complexos coloridos formados nas faixas de 1,84 × 10-4 e 1,29 × 10-3 mol L-1 e 5,04 × 10-4 e 2,52 × 10- 3 mol L-1 para captopril/p-cloranil/H2O2 e de metildopa/molibdato de amônio, respectivamente, com bons coeficientes de determinação. As análises estatísticas dos resultados obtidos mostraram que não houve diferença significativa entre os métodos propostos e os métodos oficiais como evidente a partir dos testes "t-Student" eF-Fisher, com nível de confiança de 95%. Os resultados deste estudo demonstram que o instrumento proposto neste trabalho é simples, de fácil operação, baixo custo e apresentou boa exatidão e boa precisão para o doseamento de fármacos em medicamentos.

Biomimetic aqueous-core lipid nanoballoons integrating a multiple emulsion formulation: a suitable housing system for viable lytic bacteriophages.

The emergence of antibiotic-resistant bacterial strains and the weak penetration of antibiotics into bacterial biofilms put an emphasis in the need for safe and effective alternatives for antimicrobial treatments. The application of strictly lytic bacteriophages (or phages) has been proposed as an alternative (or complement) to conventional antibiotics, allowing release of the natural predators of bacteria directly to the site of infection. In the present research effort, production of bacteriophage derivatives (starting from lytic phage particle isolates), encompassing full stabilization of their three-dimensional structure, has been attempted via housing said bacteriophage particles within lipid nanovesicles integrating a multiple water-in-oil-in-water (W/O/W) emulsion. As a proof-of-concept for the aforementioned strategy, bacteriophage particles with broad lytic spectrum were entrapped within the aqueous core of lipid nanoballoons integrating a W/O/W multiple emulsion. Long-term storage of the multiple emulsions produced did not lead to leaching of phage particles, thus proving the effectiveness of the encapsulation procedure.

Development and characterization of a hydrogel containing nitrofurazone for antimicrobial topical applications.

The goal of the research work entertained herein was the development and characterization of a poly-(vinyl alcohol) (PVA) hydrogel cross-linked with glutaraldehyde and impregnated with 0.2% (w/w) nitrofurazone (NTZ), for topical applications. To verify the active principle release capability, one has determined (i) swelling profile, (ii) in vitro release of NTZ via UV-VIS spectrophotometry, and (iii) antimicrobial activity via exposure to the hydrogel of ATCC strains of Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa. The optimized hydrogel was further characterized via scanning electron microscopy (SEM), infrared spectroscopy with Fourier transform, moisture content determinations and thermal analyses via thermal gravimetry (TGA). Swelling tests revealed a mass increase from 100±5% up to 350±11%. Incorporated NTZ displayed bactericidal activity, as expected, being released in a linearly controlled fashion above 6 µg/mL during experiment timeframes of 14 h. SEM analyses allowed verification of a homogeneous surface morphology, while infrared spectra showed that NTZ did not bind strongly to the cross-linked polymer. Furthermore, results from thermal analyses suggested a loss of thermal stability arising from incorporation of NTZ in the hydrogel. The optimized hydrogel exhibited characteristics with high potential for (antimicrobial) treatment of skin lesions.

Development and characterization of a gel formulation integrating microencapsulated nitrofurazone.

Nitrofurazone (NTZ) is usually employed in the topical treatment of infected wounds and lesions of both skin and mucosa. Microencapsulation is a process utilized in the incorporation of active ingredients within polymers aiming at, among other objectives, the prolonged release of pharmaceutical compounds and protection from atmospheric agents (viz. moisture, light, heat and/or oxidation). With the goal of utilizing the microparticles containing encapsulated NTZ in pharmaceutical formulations, one prepared microparticles containing NTZ via ionotropic gelation of sodium alginate. The microparticles were characterized via scanning electron microscopy analyses, Fourier transform infrared spectroscopy (FTIR) analyses, via determination of encapsulation efficiency, and via thermal analyses (both TGA and DSC). The final gel formulation was also characterized rheologically. The extrusion/solidification technique employed to obtain the calcium alginate microparticles with encapsulated NTZ was found to be adequate, and produced an NTZ encapsulation efficiency of ca. 97.8% ± 1.1%. The calcium alginate microparticles thus obtained, with encapsulated NTZ, exhibited an oval shape and hydrodynamic diameters between 500 µm and 800 µm. From the thermal analyses performed, together with information from the infrared spectra, one may conclude that NTZ did not strongly bind to the polymer, which may be favorable for the release of the active ingredient. From the results obtained in the present research effort, one may conclude that the microparticles produced possess the potential to be utilized as carriers for NTZ in pharmaceutical formulations such as gels, ointments, and solutions.

Development of a buccal mucoadhesive film for fast dissolution: mathematical rationale, production and physicochemical characterization.

The validity of a mathematical rationale for preparation of a fast-dissolving buccal mucoadhesive was tested. A buccal mucoadhesive biopolymeric formulation has been developed having pullulan as the main component. The formulation was duly evaluated physicochemically, via assays for intrinsic viscosity (resulting in 71.61 cm3 g(-1)), differential scanning calorimetry analysis (resulting in a Tg = 63 °C), thermogravimetric analysis (244-341 °C), moisture content determinations (14%, w/w), dissolution timeframe (41.6 s), mucoadhesion force (40 kg/cm2), scanning electron microscopy analyses (critical ray under 1.0 µm), mechanic strength (tensile strength = 58 N/mm2, deformation = 4.4%). The mucoadhesive formulation exhibited important characteristics for a drug carrier, that is, a 6 cm2 area, a fast dissolution timeframe, an adequate mucoadhesivity, resistance to both oxygen and water vapor penetration, increased viscosity in solution (ranging from 33.2 cm3/g to 71.61 cm3/g), easy molding, suitable water solubility and transparency.

Carbohydrate hydrogels with stabilized phage particles for bacterial biosensing: bacterium diffusion studies.

Bacteriophage particles have been reported as potentially useful in the development of diagnosis tools for pathogenic bacteria as they specifically recognize and lyse bacterial isolates thus confirming the presence of viable cells. One of the most representative microorganisms associated with health care services is the bacterium Pseudomonas aeruginosa, which alone is responsible for nearly 15% of all nosocomial infections. In this context, structural and functional stabilization of phage particles within biopolymeric hydrogels, aiming at producing cheap (chromogenic) bacterial biosensing devices, has been the goal of a previous research effort. For this, a detailed knowledge of the bacterial diffusion profile into the hydrogel core, where the phage particles lie, is of utmost importance. In the present research effort, the bacterial diffusion process into the biopolymeric hydrogel core was mathematically described and the theoretical simulations duly compared with experimental results, allowing determination of the effective diffusion coefficients of P. aeruginosa in the agar and calcium alginate hydrogels tested.

Structural and functional stabilization of phage particles in carbohydrate matrices for bacterial biosensing.

Infections associated with health care services are nowadays widespread and, associated to the progressive emergence of microorganisms resistant to conventional chemical antibiotics, are major causes of morbidity and mortality. One of the most representative microorganisms in this scenario is the bacterium Pseudomonas aeruginosa, which alone is responsible for ca. 13-15% of all nosocomial infections. Bacteriophages have been reported as a potentially useful tool in the diagnosis of bacterial diseases, since they specifically recognize and lyse bacterial isolates thus confirming the presence of viable cells. In the present research effort, immobilization of these biological (although metabolically inert) entities was achieved via entrapment within (optimized) porous (bio)polymeric matrices of alginate and agar, aiming at their full structural and functional stabilization. Such phage-impregnated polymeric matrices are intended for future use as chromogenic hydrogels sensitive to color changes evolving from reaction with (released) intracytoplasmatic moieties, as a detection kit for P. aeruginosa cells.

Determination of sodium, potassium, calcium and magnesium cations in biodiesel by ion chromatography.

This work reports an ion chromatographic (IC) method for the quantitative determination of inorganic cations (Na(+), K(+), Mg(2+) and Ca(2+)) in biodiesel samples that were synthesized from different vegetable oils and fat. The proposed method uses water extraction, heating and ultrasound. The limits of detection (LOD) for each ion, in milligrams of the analyte per kilogram of biodiesel (mgkg(-1)), were respectively: 0.11 (Na(+)); 0.42 (K(+)); 0.23 (Ca(2+)); and 0.36 (Mg(2+)). The accuracy of the method was studied through recovery tests. For comparison, two samples were also analyzed using an Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) procedure. The paired Student t test and the Snedecor F test showed that both methods offer equivalent results in terms of accuracy and precision. The operational simplicity, accuracy and precision of the proposed method suggest that it can be a good alternative for the determination of inorganic cations in biodiesel samples.