Oral microbiota and dental caries data from monozygotic and dizygotic twin children.

There are recent studies which aimed to detect the inheritance on the etiology of dental caries exploring oral composition. We present data on the oral microbiota and its relation with dental caries and other factors in monozygotic (MZ) and dizygotic (DZ) twin children. Following clinical investigation, DNA samples were collected and isolated from saliva of 198 patients (49 MZ and 50 DZ twins) with an average age of 9.7 ± 2.7 years. Salivary bacterial microbiota analysis was performed using high throughput amplicon sequencing method targeting V3-V4 region of the 16S rRNA gene. A total of 8,297,859 raw reads corresponding to 41,908 reads per sample were obtained on average. The QIIME2-deblur workflow was used for 16S rRNA amplicon analysis. Microbiome similarity analyses between twins (based on Bray-Curtis dissimilarity, weighted and unweighted Unifrac distances) showed that monozygotic twins share more bacterial microbial content compared to dizygotic twins. This is a large microbial community dataset of MZ and DZ twins with or without dental findings which can be further used for children oral microbiome profile explorations.

Robotic approach to the reduction of dental anxiety in children.

OBJECTIVE: We introduced a humanoid robot for the use of techno-psychological distraction techniques in children aged 4-10 to reduce their anxiety and improve their behaviour during dental treatment. MATERIALS AND METHODS: Two hundred children (98 boys, 102 girls; mean age: 6.5 ± 1.66 years) appointed for first time for dental caries were included and randomly divided into two groups [N = 100 for each group; RG: Robot Group (accompanied by the robot), CG: Control Group (without robot accompaniment)]. Half of the children were treated under local anaesthesia (infiltration anaesthesia) (n = 50 within each group) and half of the children were treated without any local anaesthesia (n = 50 within each group) within each group. The success rate of the new robotic distraction technique was evaluated by using Parental Corah Dental Anxiety Scale, Facial Image Scale (FIS), physiological pulse rate and Frankl Behaviour Rating Scale (FBRS). RESULT: Pulse rates, which measured during treatment and after treatment, were statistically higher in CG than in RG (p < .05). After dental treatment, the FIS score was significantly higher in CG than RG (p < .05). 88.3% of the children in RG stated that they wanted the robot to be with them at the next treatment session. CONCLUSIONS: Robotic technology can successfully help in coping with dental anxiety and stress, and helps children to behave better in dental office.

The inhibitory effects of polypyrrole on the biofilm formation of Streptococcus mutans.

Streptococcus mutans primary thrives on the biofilm formation on the tooth surface in sticky biofilms and under certain conditions can lead to carious lesions on the tooth surface. To search for a new preventive material for oral biofilm-associated diseases, including dental caries, we investigated the effects of polypyrrole, which contains an electrochemical polymer and causes protonation and incorporation of anion under low pH condition, on the biofilm formation of S. mutans and other streptococci. In this study, polypyrrole was applied in biofilm formation assays with the S. mutans strains UA159 and its gtfB and gtfC double mutant (gtfBC mutant), S. sanguinis, S. mitis and S. gordonii on human saliva and bovine serum albumin-coated 96-well microtiter plates in tryptic soy broth supplemented with 0.25% sucrose. The effects of polypyrrole on biofilm formation were quantitatively and qualitatively observed. High concentrations of polypyrrole significantly inhibited the biofilm formation of S. mutans UA159 and S. sanguinis. As an inhibition mechanism, polypyrrole attached to the surface of bacterial cells, increased chains and aggregates, and incorporated proteins involving GTF-I and GTF-SI produced by S. mutans. In contrast, the biofilm formation of gtfBC mutant, S. sanguinis, S. mitis and S. gordonii was temporarily induced by the addition of low polypyrrole concentrations on human saliva-coated plate but not on the uncoated and bovine serum albumin-coated plates. Moreover, biofilm formation depended on live cells and, likewise, specific interaction between cells and binding components in saliva. However, these biofilms were easily removed by increased frequency of water washing. In this regard, the physical and electrochemical properties in polypyrrole worked effectively in the removal of streptococci biofilms. Polypyrrole may have the potential to alter the development of biofilms associated with dental diseases.

Antimicrobial Effect of Newly Formulated Toothpastes and a Mouthrinse on Specific Microorganisms: An In Vitro Study.

OBJECTIVE: The aim of this in vitro study was to assess the antimicrobial properties of newly formulated toothpastes (four toothpastes for adults and two toothpastes for kids/babies) and a mouthrinse. MATERIALS AND METHODS: Newly formulated six different toothpastes and one mouthrinse of a single brand and commercially available five toothpastes and three mouthrinse were investigated for their antimicrobial activity against two oral pathogens, Streptococcus mutans and Candida albicans, by agar well diffusion assay. After incubation, the inhibition zone diameters were measured in millimeters and statistical analyses were performed. RESULTS: All experimental adult toothpastes exhibited good antimicrobial activity against S. mutans and C. albicans except the experimental toothpaste D. Experimental toothpaste B exhibited the highest antibacterial activity against C. albicans and S. mutans. Experimental toothpaste for kids showed the best antimicrobial activity against S. mutans when kids' toothpastes were compared. None of the tested toothpastes for kids/babies showed antibacterial effects for C. albicans. Among the mouthrinse tested, Sensodyne mouthrinse showed the best results. Experimental mouthrinse showed significantly lower antibacterial activity against S. mutans then Sensodyne, Eludril, and chlorhexidine mouthrinse. CONCLUSION: Although experimental toothpaste and mouthrinse formulations revealed good results in terms of antimicrobial activity to some specific microorganisms, further studies involving more bacterial species or analyzing the quality and efficacy of these products by other in vitro or in vivo tests are needed.

Candidate gene sequencing reveals mutations causing hypoplastic amelogenesis imperfecta.

OBJECTIVE: Amelogenesis imperfecta (AI) is a rare hereditary disorder affecting the quality and quantity of the tooth enamel. The purpose of this study was to identify the genetic etiology of hypoplastic AI families based on the candidate gene approach. MATERIALS AND METHODS: We recruited three Turkish families with hypoplastic AI and performed a candidate gene screening based on the characteristic clinical feature to find the pathogenic genetic etiology. RESULTS: The candidate gene sequencing of the LAMB3 gene for family 1 revealed a heterozygous nonsense mutation in the last exon [c.3431C > A, p.(Ser1144*)]. FAM20A gene sequencing for families 2 and 3 identified a homozygous deletion [c.34_35delCT, p.(Leu12Alafs*67)] and a homozygous deletion-insertion (c.1109 + 3_1109 + 7delinsTGGTC) mutation, respectively. CONCLUSION: The candidate gene approach can be successfully used to identify the genetic etiology of the AI in some cases with characteristic clinical features. CLINICAL RELEVANCE: Identification of the genetic etiology of the AI will help both the family members and dentist understand the nature of the disorder. Characteristic clinical feature can suggest possible genetic causes.

Nephrocalcinosis in Amelogenesis Imperfecta Caused by the FAM20A Mutation.

BACKGROUND/AIMS: Enamel-renal syndrome is characterized by nephrocalcinosis, enamel defects, gingival hyperplasia and eruption failures. It has been recently identified that recessive mutations in the FAM20A gene result in amelogenesis imperfecta (AI)-gingival fibromatosis. The aim of this research to determine whether AI patients with known -FAM20A mutations also have nephrocalcinosis. METHODS: Complete oral and radiological examinations were performed for all participating family members. Renal examinations were performed using ultrasound. RESULTS: The teeth were evaluated for severe loss, and multiple eruption failures were evident from the clinical and radiological examinations. Unexpected extensive and fast crown resorption was found by radiological examination. Renal ultrasound revealed bilateral nephrocalcinosis in both affected individuals. Recessive FAM20A mutations can cause nephrocalcinosis in addition to the oral phenotype. CONCLUSION: AI patients with similar clinical phenotypes and FAM20A mutations should be examined for nephropathy even if they lack pertinent symptoms. Nephrology referral is warranted for patients who have clinical phenotypes related to AI-gingival fibromatosis even if they are not symptomatic.

Prevalence and etiology of molar-incisor hypomineralization (MIH) in the city of Istanbul.

BACKGROUND/PURPOSE: Molar-Incisor-Hypomineralisation (MIH) is the term used to depict a condition in which one or more of the permanent molar teeth and usually no less than one incisor tooth is hypomineralised and the prevalence rates vary from 2.4 to 40.2%. The aim of this study was to assess the prevalence and the risk factors of MIH in children in Istanbul, Turkey. MATERIALS AND METHODS: A total of 1511 (760 M, 751 F), 8- to 11-year-old children were examined who had their first permanent molar and incisors evaluated using the EAPD criteria for MIH. Hypomineralized molars and incisors were recorded based on developmental defects of enamel index. The potential aetiological factors were retrieved through personal interview and etiological questions were asked to the parents. Statistical analysis was performed with a chi-Square test. RESULTS: MIH was observed in 215 (14.2%; 102 male, 113 female) children. The sample (1511 children) comprised 71 (9.9%) 8 year-olds with MIH and 144 (18.2%) 11 year-olds with MIH. A significant difference was found between 8 (9.9%) and 11-year-old (18.2%) children with MIH (p ≤ 0.001). Complications during the mother's pregnancy, birth prematurity, average breast feeding period, diarrhea frequency, digestive system diseases, asthma, frequent high fever, ear infection, renal failure, rubeola, chickenpox and parotitis were found to be significantly associated with MIH (p < 0.001). CONCLUSION: There are many events that can cause MIH which we cannot control or predict. Therefore, longitudinal studies with large sample size are needed so as to determine how various likely etiological factors described affect the etiological role.

Success Rates of Pulpotomies in Primary Molars Using Calcium Silicate-Based Materials: A Randomized Control Trial.

OBJECTIVE: The aim of this study was to evaluate and compare, both clinically and radiographically, the effects of calcium silicate-based materials (i.e., ProRoot MTA [PR-MTA], MTA-Plus [MTA-P], and Biodentine [BD]) and ferric sulfate [FS] in pulpotomy of primary molars. MATERIALS AND METHODS: In this randomized clinical trial, 29 healthy 5- to 7-year-old children with at least four carious primary molars with no clinical or radiographic evidence of pulp degeneration were enrolled. The pulpotomy agents were assigned as follows: Group 1: BD; Group 2: MTA-P; Group 3: PR-MTA; and Group 4: FS. Clinical and radiographic evaluations were performed at 6, 12, and 24 months. Data were analyzed using chi-square tests. RESULTS: Total success rates at 24 months were 82.75%, 86.2%, 93.1%, and 75.86%, respectively. No statistically significant differences in total success rates were observed among the groups at 6-, 12-, and 24-month follow-ups. When the groups were compared according to follow-up times, the success rates in each group did not vary significantly among the 6-12-month, 6-24-month, or 12-24-month periods (p > 0.05). CONCLUSION: Although the success rates of BD, MTA-P, MTA-PR, and FS did not differ significantly, calcium silicate-based materials appeared to be more appropriate than FS in clinical practice.

Teratogenicity of Antiepileptic Drugs.

OBJECTIVE: Antiepileptic drugs (AED) have chronic teratogenic effects, the most common of which are congenital heart disease, cleft lip/palate, urogenital and neural tube defects. The aim of our study is to examine teratogenic effects of AED and the correlation between these malformations and AED in single or multiple pregnancies. METHODS: This is a retrospective study of malformations in children born to mothers currently followed up by our outpatient clinics who used or discontinued AED during their pregnancy. Their children were then investigated using echocardiography, urinary ultrasound, cranial magnetic resonance image, and examined by geneticists and pediatric dentists. RESULTS: One hundred and seventeen children were included in the study. Ninety one of these children were exposed to AED during pregnancy. The most commonly used AED were valproic acid and carbamazepine in monotherapy. The percentage of major anomaly was 6.8% in all children. Dysmorphic features and dental anomalies were observed more in children exposed especially to valproic acid. There were 26 mothers with two and four mothers with three pregnancies from the same fathers. No correlation was found between the distribution of malformations in recurring pregnancies and AED usage. CONCLUSION: Our study has the highest number of dysmorphism examined in literature, found in all the children exposed to valproic acid, which may account for the higher rate of facial dysmorphism and dental anomalies. On lower doses of valproic acid, major malformations are not seen, although the risk increases with polytherapy. Our data also indicate possible effects of genetic and environmental factors on malformations.

Effects of Different Pediatric Drugs on the Color Stability of Various Restorative Materials Applicable in Pediatric Dentistry.

Background. The chronic recommendation of pediatric drugs could exhibit erosive and cariogenic problems. Objective. To evaluate the effects of different pediatric drugs on the color stability of various restorative materials. Methods. Five specimens (1 mm × 3 mm) were prepared and immersed in ten different pediatric drugs and agitated every 8 hours daily for 2 min up to 1 week. Between immersion periods, the samples were stored in artificial saliva. After 1-week period, ΔE⁎ values were calculated. Two-way ANOVA and Fisher's LSD test were used for statistical analysis at a level of p < 0.05. Results. ΔE⁎ values were only significantly influenced by restorative material factor (p < 0.001) and varied in the range of 2.08 and 6.55 units for all drugs/restorative materials. The highest ΔE⁎ was found in Ferrosanol B-composite (6.55 ± 1.38) and the lowest one was found in Dolven-glass ionomer (2.08 ± 0.40) pairwise. The most prominent ΔE⁎ value elevations were obtained in composite material compared to the compomer and/or glass ionomers in Macrol, Ferrosanol B, and Ventolin (p < 0.001; for all) and also for other drugs (p < 0.05). Dolven exhibited significantly higher values compared to Augmentin (p = 0.021), Macrol (p = 0.018), and Ventolin (p = 0.013) in compomer group. Conclusion. The clinically perceptible color changes for tested composite/pediatric drug pairwise can be more problematic than compomer and glass ionomers in pediatric dentistry.

Investigation of the Er: YAG laser and diamond bur cavity preparation on the marginal microleakage of Class V cavities restored with different flowable composites.

The purpose of this study was to evaluate the efficiency of the Er:YAG laser and diamond bur cavity preparation on the marginal microleakage of Class V cavities. Group 1: bur preparation (bp) + Vertise Flow (VF); Group 2: laser preparation (lp) + VF; Group 3: bp + Adper Easy One (AEO) + Filtek Ultimate Flowable Composite (FUFC); Group 4: lp + AEO + FUFC; Group 5: bp + Clearfil S3 Bond (CSB) + Clearfil Majesty Flow (CMF); Group 6: lp + CSB + CMF. Data were analyzed by Kruskal-Wallis and Mann-Whitney U tests (p < .05). More microleakage was observed in cervical regions compared to occlusal regions in all groups (p < .05). No significant difference was observed among all groups in terms of occlusal and cervical surfaces, respectively (p > .05). The use of the Er:YAG laser for cavity preparation with different adhesive systems and flowable composites did not influence microleakage.

Recessive Mutations in ACPT, Encoding Testicular Acid Phosphatase, Cause Hypoplastic Amelogenesis Imperfecta.

Amelogenesis imperfecta (AI) is a heterogeneous group of genetic disorders affecting tooth enamel. The affected enamel can be hypoplastic and/or hypomineralized. In this study, we identified ACPT (testicular acid phosphatase) biallelic mutations causing non-syndromic, generalized hypoplastic autosomal-recessive amelogenesis imperfecta (AI) in individuals from six apparently unrelated Turkish families. Families 1, 4, and 5 were affected by the homozygous ACPT mutation c.713C>T (p.Ser238Leu), family 2 by the homozygous ACPT mutation c.331C>T (p.Arg111Cys), family 3 by the homozygous ACPT mutation c.226C>T (p.Arg76Cys), and family 6 by the compound heterozygous ACPT mutations c.382G>C (p.Ala128Pro) and 397G>A (p.Glu133Lys). Analysis of the ACPT crystal structure suggests that these mutations damaged the activity of ACPT by altering the sizes and charges of key amino acid side chains, limiting accessibility of the catalytic core, and interfering with homodimerization. Immunohistochemical analysis confirmed localization of ACPT in secretory-stage ameloblasts. The study results provide evidence for the crucial function of ACPT during amelogenesis.

Long-Term Fracture Resistance of Simulated Immature Teeth Filled with Various Calcium Silicate-Based Materials.

Objective. The aim of this in vitro study was to evaluate the long-term fracture resistance of simulated human immature permanent teeth filled with BioAggregate™ (BA), mineral trioxide aggregate (MTA), and EndoSequence® Root Repair Material (ERRM). Material and Methods. 40 teeth, simulated to average root length of 13 ± 1 mm (Cvek's stage 3), were included in the study. The teeth were randomly divided into four groups: Group 1: DiaRoot® BA, Group 2: MTA-Plus™ (MTA-P), Group 3: MTA-Angelus (MTA-A), and Group 4: ERRM. The root canal filling materials were applied according to the manufacturers' instructions. After 24 months of incubation, the roots of the teeth were embedded in acrylic blocks and subjected to fracture testing. The resultant data were analyzed statistically by Kruskal-Wallis and Mann-Whitney U tests. Results. Mean (±SD) failure loads (MPa) were 20.46 ± 2.53 for BA, 18.88 ± 5.13 for MTA-P, 14.12 ± 1.99 for MTA-A, and 17.65 ± 4.28 for ERRM groups. BA group exhibited the highest and MTA-A group showed the lowest resistance to fracture. Significant differences in fracture resistance were found between the groups of BA and MTA-A (p < 0.001), MTA-P and MTA-A (p < 0.05), and ERRM and MTA-A (p < 0.05). Conclusion. Within the limitations of this study, data suggests that BA-filled immature teeth demonstrate higher fracture resistance than other groups at 24 months appearing to be the most promising material tested.

Comparison of total-etch, self-etch, and selective etching techniques on class V composite restorations prepared by Er:YAG laser and bur: a scanning electron microscopy study.

The purpose of this study was to compare total-etch, self-etch, and selective etching techniques on the marginal microleakage of Class V composite restorations prepared by Er:YAG laser and bur. Class V cavities prepared on both buccal and lingual surfaces of 30 premolars by Er:YAG laser or bur and divided into six groups. The occlusal margins were in enamel, and the cervical margins were in cementum. Group-1: bur preparation(bp)+Adper Single Bond 2 (ASB)+Filtek Z550 (FZ); Group-2: laser preparation(lp)+(ASB)+(FZ); Group-3: bp + Clearfil S3 Bond Plus (CSBP)+(FZ); Group-4: lp+(CSBP) (FZ); Group-5: bp + acid etching+(CSBP)+(FZ); Group-6: lp + acid etching+(CSBP)+(FZ). All teeth were stored in distilled water at 37°C for 24 hr, and then thermocycled 1000 times (5-55°C). Five teeth from each group were chosen for the microleakage investigation, and two teeth for the scanning electron microscope evaluation. Teeth which were prepared for the microleakage test were immersed in .5% methylene blue dye for 24 hr. After immersion, the teeth were sectioned and observed under a stereomicroscope for dye penetration. Data were analyzed using Kruskal-Wallis and Mann-Whitney U tests (p < .05). More microleakage was observed in the cervical regions compared to the occlusal regions in Groups 3, 5, and 6, respectively (p < .05). There is no statistically significant difference in Groups 1, 2, and 4, in terms of cervical regions versus occlusal regions (p > .05). No significant differences were observed among any groups in terms of occlusal and cervical surfaces, separately (p > .05). Different etching techniques did not influence microleakage of Class V restorations prepared by Er:YAG laser and bur.

Odontogenic lesions in a pediatric population: Review of the literature and presentation of 745 cases.

OBJECTIVES: Pediatric odontogenic lesions are rare clinical entities and are not well addressed in the otolaryngology literature. Knowledge of the biologic and clinical behavior of these lesions and their basic features such as location and age are key aspects for otolaryngologists in developing an early clinical differential diagnosis, such that they can provide adequate treatment. METHODS: Six thousand histologically-diagnosed odontogenic lesions from a 40-year period were reviewed. Pediatric patients (745 cases, 12.7%) aged up to 17 years were selected and reevaluated. The patients were divided into three age groups according to dentition periods: primary dentition (0-5 years), mixed dentition (6-12 years), and permanent dentition (13-17 years). Clinical data, including age, sex, and location, were collected from pathology records. RESULTS: Of the total of 745 cases, 596 specimens (80%) were diagnosed as odontogenic cysts and 149 specimens (20%) were diagnosed as odontogenic tumors. The most frequent odontogenic cysts were radicular cysts (48.4%), followed by dentigerous cysts (16.7%). The most common odontogenic tumor was odontoma (8.05%). CONCLUSION: This study shows that all odontogenic lesions in the pediatric group are benign. Odontogenic tumors are relatively rare in this age group. Knowledge of the biological and histopathological behaviors of odontogenic lesions and their basic features such as location and age is a key aspect for developing an early clinical differential diagnosis and providing adequate treatment.

Oral and craniofacial manifestations of Ellis-van Creveld syndrome: Case series.

PURPOSE: The objective of this case series was to determine the oral, dental and craniofacial features of patients with EvC syndrome. MATERIAL AND METHODS: Eight patients with EvC syndrome were enrolled. A complete family history, pedigree analysis, detailed medical history were collected. Findings of clinical examination, including craniofacial and orodental manifestations, and radiological investigations were thoroughly studied. RESULTS: All eight patients had characteristic face, hypertrophic frenulum, conical and peg-shaped teeth, hypodontia of deciduous and/or permanent teeth and also skeletal dysplasia, small chest, short stature and hypoplastic nails. Additionally dysmorphic filtrum, serrated appearance of gingiva, diastema, enamel hypoplasia, microdontia, taurodontism, single rooted permanent molar, delayed eruption and high caries rate were observed with varying degrees. Cephalometric evaluation revealed skeletal Class III growth pattern in four subjects and Class II growth pattern in one subject. CONCLUSION: Evaluation of craniofacial and orodental anomalies of EvC syndrome is required for accurate differential diagnosis from other congenital syndromes.

Prevalence and characteristics of talon cusps in Turkish population.

BACKGROUND: Talon cusp is a rare dental anomaly characterized by a cusp-like projection, often including the palatal surface of the affected tooth. The aim of the present study was to investigate the prevalence and characteristics of talon cusps in a group of Turkish children. MATERIALS AND METHODS: The study population consisted of 14,400 subjects who attended the clinics of the Department of Pediatric Dentistry at the Istanbul University, Istanbul, Turkey. Subjects ranged in age from 1 to 14 years with a mean age of 10.5 ± 2.55 years. Talon cusps were mainly categorized by visual examination according to the classification of Hattab et al. The distribution and frequency of talon cusps were calculated with respect to dentition type, tooth type, talon type, the affected surface, associated dental anomalies, and clinical complications. Statistical analysis included descriptive statistics, frequencies, and crosstabs with Chi-square analysis. RESULTS: Talon cusps were detected in 49 subjects (26 males and 23 females) of 14,400 (0.34%). A total of 108 teeth showed talon cusps. Distribution of talon cusps according to gender showed no statistically significant differences. The incidence of talon cusps was found to be greater in maxillary lateral incisors (53.7%) than central incisors (29.62%). Regarding the type of talon cusp, 47.22% of teeth showed a Type III talon cusp, whereas 30.55% of teeth demonstrated a Type II talon and 22.22% of teeth demonstrated a Type I talon cusp. Nine patients (18.36%) with talon cups also exhibited other developmental dental anomalies. Clinical complications associated with talon cusps were detected as caries formation and occlusal interference. CONCLUSION: This is the most comprehensive study of the prevalence of talon cusps in Turkish population using the largest sample size to date. Also, taurodontism associated with a talon cusp has been reported here for the 1(st) time. Clinical complications associated with talon cusps need more investigations.

Effect of different parameters of Er:YAG laser irradiations on class V composite restorations: A scanning electron microscopy study.

The purpose of this study was to compare different parameters of Er:YAG laser irradiations on the marginal microleakage of Class V resin composite restorations. A total of 45 extracted premolars were selected for the study. Class V cavities prepared on both buccal and lingual surfaces of teeth by Er:YAG laser or bur and divided into nine groups. The occlusal margins were in enamel and the cervical margins were in cementum. Group-1: bur preparation; Group-2: laser preparation (lp) (600 mJ/5 Hz); Group-3: lp (300 mJ/10 Hz); Group-4: lp (200 mJ/15 Hz); Group-5: lp (150 mJ/20 Hz); Group-6: lp (200 mJ/20 Hz); Group-7: lp (300 mJ/14 Hz); Group-8: lp (400 mJ/10 Hz); Group-9: lp (700 mJ/5 Hz). All teeth were stored in distilled water at 37°C for 24 h, then thermocycled 1,000 times (5-55°C). Five teeth from each group were chosen for the microleakage investigation and two teeth for the scanning electron microscope (SEM) evaluation. Teeth, which were prepared for the microleakage test were immersed in 0.5% methylene blue dye for 24 h. After immersing, the teeth were sectioned and observed under a stereomicroscope for dye penetration. Data were analyzed by Kruskal-Wallis and Mann-Whitney U tests (p < 0.05). More microleakage was observed in cervical regions compared to occlusal regions in all groups (p < 0.05) except for Group 6 (p > 0.05). No significant difference was observed among groups in terms of occlusal and cervical surfaces, separately (p > 0.05). It may be concluded that the cavities prepared by Er:YAG laser showed higher degree of microleakage than bur prepared at cervical regions. Different parameters of Er:YAG laser irradiations affected microleakage. SCANNING 38:434-441, 2016. © 2016 Wiley Periodicals, Inc.

The effects of cavity-filling techniques on microleakage in class II resin restorations prepared with Er:YAG laser and diamond bur: A scanning electron microscopy study.

The purpose of this study was to investigate how two cavity-filling techniques affect microleakage in class II resin restorations prepared with Er:YAG laser and diamond bur. Standard MO and DO cavities were prepared in 20 extracted third molars, each randomly assigned to either Group-1 [Herculite XRV Ultra-bur-prepared cavity(bp)], Group-2 [Herculite XRV Ultra-laser-prepared cavity(lp)], Group-3 (SonicFill-(bp)], or Group-4 [SonicFill-(lp)]. For Groups 2 and 4, cavities were prepared by using an Er:YAG laser with a wavelength of 2.94 µm, output power of 200 mJ/pulse, and repetition rate of 20Hz. Teeth were restored with a one-step, self-etch adhesive material (OptiBond All-in-One), a nanohybrid composite (Herculite XRV Ultra), and a bulk-fill composite (SonicFill) according to the manufacturer's instructions. Five teeth from each group were chosen for microleakage investigation and two teeth for scanning electron microscope evaluation. Statistical analysis was performed by using Kruskal-Wallis test. Pair-wise comparisons were performed by Mann-Whitney U test with Bonferroni correction (p < 0.05). The statistical analysis of data revealed greater microleakage in cervical versus occlusal regions in all groups (P < 0.05). Group-2 yielded a higher degree of marginal leakage than Group-3 in terms of occlusal surfaces (p < 0.05). For cervical regions, a statistically significant difference was observed between Groups 2 and 3 as well as Groups 2 and 4 (p < 0.05). Group-3 exhibited significantly better marginal sealing than Group-1 in the cervical region (p < 0.05). The cavities prepared using an Er:YAG laser showed greater microleakage than those conventionally prepared using burs regardless of restorative material at both occlusal and cervical margins. SCANNING 38:389-395, 2016. © 2015 Wiley Periodicals, Inc.