RESUMEN
We present the first-time growth of bulk BaSnO3 single crystals from the melt by direct solidification, their basic electrical and optical properties as well as their structural quality. Our measurement of the melting point (MP) of BaSnO3 amounts to 1855 °C ± 25 K. At this temperature an intensive decomposition and non-stoichiometric evaporation takes place as the partial pressure of SnO(g) is about 90 times higher than that of BaO(g). X ray powder diffraction identified only the BaSnO3 perovskite phase, while narrow rocking curves having a full width at half maximum of 26 arcsec and etch pit densities below 106 cm-2 confirm a high degree of structural perfection of the single crystals. In this respect they surpass the structural properties of those single crystals that were reported in the literature. The electrical conductivity of nominally undoped crystals depends on the growth conditions and ranges from insulating to medium n-type conductivity. After post-growth annealing in an oxidizing atmosphere undoped crystals are generally insulating. Doping the crystals with lanthanum during growth results in a high n-type conductivity. For a La doping concentration of 0.123 wt.% we measured an electron concentration of 3.3 × 1019 cm-3 and an electron mobility of 219 cm2 V-1 s-1. Based on optical absorption measurements we determined an energy of 3.17 ± 0.04 eV at 5 K and of 2.99 ± 0.04 eV at 297 K for the indirect band gap of BaSnO3.
RESUMEN
Here we demonstrate how the Fermi surface topology and quantum many-body interactions can be manipulated via epitaxial strain in the spin-triplet superconductor Sr_{2}RuO_{4} and its isoelectronic counterpart Ba_{2}RuO_{4} using oxide molecular beam epitaxy, in situ angle-resolved photoemission spectroscopy, and transport measurements. Near the topological transition of the γ Fermi surface sheet, we observe clear signatures of critical fluctuations, while the quasiparticle mass enhancement is found to increase rapidly and monotonically with increasing Ru-O bond distance. Our work demonstrates the possibilities for using epitaxial strain as a disorder-free means of manipulating emergent properties, many-body interactions, and potentially the superconductivity in correlated materials.
RESUMEN
A new orthorhombic phase of the multiferroic BiFeO3 has been created via strain engineering by growing it on a NdScO(3)(110)(o) substrate. The tensile-strained orthorhombic BiFeO3 phase is ferroelectric and antiferromagnetic at room temperature. A combination of nonlinear optical second harmonic generation and piezoresponse force microscopy revealed that the ferroelectric polarization in the orthorhombic phase is along the in-plane {110}(pc) directions. In addition, the corresponding rotation of the antiferromagnetic axis in this new phase was observed using x-ray linear dichroism.
RESUMEN
We report a UV-Raman study of folded acoustic vibrations in epitaxial ferroelectric BaTiO3/SrTiO3 superlattices. The folded acoustic doublets show an anomalous temperature dependence disappearing above the ferroelectric transition, which is tuned by varying the thickness of the BaTiO3 and SrTiO3 layers. A mechanism involving the acoustic phonon modulation of the spatially periodic ferroelectric polarization explains the observed temperature dependence. These results demonstrate the strong coupling between sound, charge, and light in these multifunctional nanoscale ferroelectrics.
RESUMEN
Multiferroicity can be induced in strontium titanate by applying biaxial strain. Using optical second harmonic generation, we report a transition from 4/mmm to the ferroelectric mm2 phase, followed by a transition to a ferroelastic-ferroelectric mm2 phase in a strontium titanate thin film. Piezoelectric force microscopy is used to study ferroelectric domain switching. Second harmonic generation, combined with phase-field modeling, is used to reveal the mechanism of coupled ferroelectric-ferroelastic domain wall motion. These studies have relevance to multiferroics with coupled polar and axial phenomena.
RESUMEN
Biaxial compressive strain has been used to markedly enhance the ferroelectric properties of BaTiO3 thin films. This strain, imposed by coherent epitaxy, can result in a ferroelectric transition temperature nearly 500 degrees C higher and a remanent polarization at least 250% higher than bulk BaTiO3 single crystals. This work demonstrates a route to a lead-free ferroelectric for nonvolatile memories and electro-optic devices.
RESUMEN
Systems with a ferroelectric to paraelectric transition in the vicinity of room temperature are useful for devices. Adjusting the ferroelectric transition temperature (T(c)) is traditionally accomplished by chemical substitution-as in Ba(x)Sr(1-x)TiO(3), the material widely investigated for microwave devices in which the dielectric constant (epsilon(r)) at GHz frequencies is tuned by applying a quasi-static electric field. Heterogeneity associated with chemical substitution in such films, however, can broaden this phase transition by hundreds of degrees, which is detrimental to tunability and microwave device performance. An alternative way to adjust T(c) in ferroelectric films is strain. Here we show that epitaxial strain from a newly developed substrate can be harnessed to increase T(c) by hundreds of degrees and produce room-temperature ferroelectricity in strontium titanate, a material that is not normally ferroelectric at any temperature. This strain-induced enhancement in T(c) is the largest ever reported. Spatially resolved images of the local polarization state reveal a uniformity that far exceeds films tailored by chemical substitution. The high epsilon(r) at room temperature in these films (nearly 7,000 at 10 GHz) and its sharp dependence on electric field are promising for device applications.