Building Consensus for a Shared Definition of Adverse Events: A Case Study in the Profession of Dentistry.

BACKGROUND: To achieve high-quality health care, adverse events (AEs) must be proactively recognized and mitigated. However, there is often ambiguity in applying guidelines and definitions. We describe the iterative calibration process needed to achieve a shared definition of AEs in dentistry. Our alignment process includes both independent and consensus building approaches. OBJECTIVE: We explore the process of defining dental AEs and the steps necessary to achieve alignment across different care providers. METHODS: Teams from 4 dental institutions across the United States iteratively reviewed patient records after identification of charts using an automated trigger tool. Calibration across teams was supported through negotiated definition of AEs and standardization of evidence provided in review. Interrater reliability was assessed using descriptive and κ statistics. RESULTS: After 5 iterative cycles of calibration, the teams (n = 8 raters) identified 118 cases. The average percent agreement for AE determination was 82.2%. Furthermore, the average, pairwise prevalence and bias-adjusted κ (PABAK) was 57.5% (κ = 0.575) for determining AE presence. The average percent agreement for categorization of the AE type was 78.5%, whereas the PABAK was 48.8%. Lastly, the average percent agreement for categorization of AE severity was 82.2% and the corresponding PABAK was 71.7%. CONCLUSIONS: Successful calibration across reviewers is possible after consensus building procedures. Higher levels of agreement were found when categorizing severity (of identified events) rather than the events themselves. Our results demonstrate the need for collaborative procedures as well as training for the identification and severity rating of AEs.

Efficacy of Adjunctives in Periodontal Surgeries: An Evidenced-Based Summary.

Periodontal surgery is required to access the root surfaces in order to debride them of dental plaque and calculus, promote pocket reduction, create healthy bone architecture, and provide patients greater access to out-of-reach areas to maintain oral hygiene. The use of adjunctive agents and materials-enamel matrix derivatives, low-laser treatment, ozone, locally administered minocycline HCL, doxycycline gels, tetracycline fibers, chlorhexidine chips, granular beta-tricalcium phosphate, and hyaluronic acid, and the like-have been reported to improve pocket depth reduction, periodontal ligament healing, bone defect filling, and mechanical debridement during guided tissue regeneration/flap surgeries. However, the efficacy and benefits of these adjuvants compared to periodontal surgery alone is still widely debated. This evidence-based review critically evaluates and summarizes the efficacy of adjuvants used in periodontal surgery that have been reported in the literature.

A generative adversarial inpainting network to enhance prediction of periodontal clinical attachment level.

OBJECTIVES: Bone level as measured by clinical attachment levels (CAL) are critical findings that determine the diagnosis of periodontal disease. Deep learning algorithms are being used to determine CAL which aid in the diagnosis of periodontal disease. However, the limited field-of-view of bitewing x-rays poses a challenge for convolutional neural networks (CNN) because out-of-view anatomy cannot be directly considered. This study presents an inpainting algorithm using generative adversarial networks (GANs) coupled with partial convolutions to predict out-of-view anatomy to enhance CAL prediction accuracy. METHODS: Retrospective purposive sampling of cases with healthy periodontium and diseased periodontium with bitewing and periapical radiographs and clinician recorded CAL were utilized. Data utilized was from July 1, 2016 through January 30, 2020. 80,326 images were used for training, 12,901 images were used for validation and 10,687 images were used to compare non-inpainted methods to inpainted methods for CAL predictions. Statistical analyses were mean bias error (MBE), mean absolute error (MAE) and Dunn's pairwise test comparing CAL at p=0.05. RESULTS: Comparator p-values demonstrated statistically significant improvement in CAL prediction accuracy between corresponding inpainted and non-inpainted methods with MAE of 1.04mm and 1.50mm respectively. The Dunn's pairwise test indicated statistically significant improvement in CAL prediction accuracy between inpainted methods compared to their non-inpainted counterparts, with the best performing methods achieving a Dunn's pairwise value of -63.89. CONCLUSIONS: This study demonstrates the superiority of using a generative adversarial inpainting network with partial convolutions to predict CAL from bitewing and periapical images. CLINICAL SIGNIFICANCE: Artificial intelligence was developed and utilized to predict clinical attachment level compared to clinical measurements. A generative adversarial inpainting network with partial convolutions was developed, tested and validated to predict clinical attachment level. The inpainting approach was found to be superior to non-inpainted methods and within the 1mm clinician-determined measurement standard.

Comparative Bone Graft Evaluation for Dental Implant Success: An Evidence-Based Review.

In this review, we provide a comparative evaluation of different bone grafts for dental implants success. We performed a literature review to analyze dental implant success and survival rates after the use of various grafts for bone augmentation. A total of 41 studies were selected and analyzed based on parameters including study design, number of implants placed, total number of participants, type of graft used, site from which graft was obtained, time elapsed between bone augmentation and implant placement, implant survival, and success rates. Results indicate that after a follow-up period of 1-5 yr, respective success and survival rates are as follows: block grafts, 91.5% and 75%; blood derivatives, 91.5% and 96.7%; composite grafts, 80.9% and 94.2%; xenografts and particulate grafts, 100% for both success and survival. After evaluating the available studies, we can report that autologous block grafts, composite grafts, and blood derivatives were the most commonly used grafting materials for bone augmentation before placing dental implants. Xenografts and particulate grafts had 100% success and survival rates, but more studies are needed to assess the impact of these grafting materials.

Temporomandibular Total Joint Replacement Implant Devices: A Systematic Review of Their Outcomes.

Functional impairment affecting the quality of life results when a wide range of both muscular and joint pathologies affect the temporomandibular joint (TMJ). There are several total temporomandibular joint prosthesis systems available for total joint replacement (TJR). This systematic review provides an overview of the different TJR systems available and discusses their outcomes and efficiency. A systematic review on the outcomes of TJR was performed in October 2020. The five databases searched are PubMed, Europe PMC, Elsevier, SpringerLink, and British Journal of Oral and Maxillofacial Surgery. Outcome measurements were changes in maximal mouth opening (MMO), pain, diet, and functional limitation preoperatively and postoperatively. Seventeen follow-up studies were included in this systematic review, with 1,343 patients. All TMJ implant devices showed significant improvement after placement in all outcomes (pain, diet, MMO). All TJR prostheses showed great improvement comparing preoperative and postoperative outcomes. There was no significant difference between devices when comparing their outcomes.

Long-Term Success of All-Ceramic Dental Implants Compared with Titanium Implants.

All-ceramic dental implants have been identified as a potential alternative to the traditional titanium-based implant systems used in dentistry to satisfy the demands for esthetic metal-free treatment of edentulous jaws. Among the all-ceramic implants introduced in dentistry, zirconia implants have emerged as the forerunner. The success of zirconia as an implant material has paralleled that of titanium in the short-term, however, few clinical studies assess success in the long-term. Failures of zirconia dental implants have been linked to improper operator techniques, manufacturing defects, and unfavorable loading, thereby necessitating optimal quality control measures by manufacturers and proper treatment planning by an experienced operator to reinforce the favorable properties of zirconia as an implant biomaterial. In this comprehensive review, the various implant-related, tissue-related, prosthesis-related, and patient-related factors affecting the success of zirconia implants have been discussed and compared with those of the titanium implant.

Classifying Adverse Events in the Dental Office.

BACKGROUND: Dentists strive to provide safe and effective oral healthcare. However, some patients may encounter an adverse event (AE) defined as "unnecessary harm due to dental treatment." In this research, we propose and evaluate two systems for categorizing the type and severity of AEs encountered at the dental office. METHODS: Several existing medical AE type and severity classification systems were reviewed and adapted for dentistry. Using data collected in previous work, two initial dental AE type and severity classification systems were developed. Eight independent reviewers performed focused chart reviews, and AEs identified were used to evaluate and modify these newly developed classifications. RESULTS: A total of 958 charts were independently reviewed. Among the reviewed charts, 118 prospective AEs were found and 101 (85.6%) were verified as AEs through a consensus process. At the end of the study, a final AE type classification comprising 12 categories, and an AE severity classification comprising 7 categories emerged. Pain and infection were the most common AE types representing 73% of the cases reviewed (56% and 17%, respectively) and 88% were found to cause temporary, moderate to severe harm to the patient. CONCLUSIONS: Adverse events found during the chart review process were successfully classified using the novel dental AE type and severity classifications. Understanding the type of AEs and their severity are important steps if we are to learn from and prevent patient harm in the dental office.

Developing and Testing Electronic Health Record-Derived Caries Indices.

Caries indices, the basis of epidemiologic caries measures, are not easily obtained in clinical settings. This study's objective was to design, test, and validate an automated program (Valid Electronic Health Record Dental Caries Indices Calculator Tool [VERDICT]) to calculate caries indices from an electronic health record (EHR). Synthetic use case scenarios and actual patient cases of primary, mixed, and permanent dentition, including decayed, missing, and filled teeth (DMFT/dmft) and tooth surfaces (DMFS/dmfs) were entered into the EHR. VERDICT measures were compared to a previously validated clinical electronic data capture (EDC) system and statistical program to calculate caries indices. Four university clinician-researchers abstracted EHR caries exam data for 45 synthetic use cases into the EDC and post-processed with SAS software creating a gold standard to compare the -VERDICT-derived caries indices. Then, 2 senior researchers abstracted EHR caries exam data and calculated caries indices for 24 patients, allowing further comparisons to VERDICT indices. Agreement statistics were computed among abstractors, and discrepancies were resolved by consensus. Agreement statistics between the 2 final-phase abstractors and the VERDICT measures showed extremely high concordance: Lin's concordance coefficients (LCCs) >0.99 for dmfs, dmft, DS, ds, DT, dt, ms, mt, FS, fs, FT, and ft; LCCs >0.95 for DMFS and DMFT; and LCCs of 0.92-0.93 for MS and MT. Caries indices, essential to developing primary health outcome measures for research, can be reliably derived from an EHR using VERDICT. Using these indices will enable population oral health management approaches and inform quality improvement efforts.

Considerations on the Use of a Temporary Anchorage Device for Improving Longevity and Success.

Controlled movement of teeth is both a science and an art that relies on applied forces and anchoring or resistance points. The temporary anchorage device (TAD) is a mini-implant that is used as an anchoring point. Applied to appropriate cases with optimal technique, TAD can enhance results. This article discusses the considerations behind increasing longevity of an implant in use and improving its success. Such considerations include implant placement, time before loading, amount of loading, and patient habits.

Evaluating quality of dental care among patients with diabetes: Adaptation and testing of a dental quality measure in electronic health records.

BACKGROUND: Patients with diabetes are at increased risk of developing oral complications, and annual dental examinations are an endorsed preventive strategy. The authors evaluated the feasibility and validity of implementing an automated electronic health record (EHR)-based dental quality measure to determine whether patients with diabetes received such evaluations. METHODS: The authors selected a Dental Quality Alliance measure developed for claims data and adapted the specifications for EHRs. Automated queries identified patients with diabetes across 4 dental institutions, and the authors manually reviewed a subsample of charts to evaluate query performance. After assessing the initial EHR measure, the authors defined and tested a revised EHR measure to capture better the oral care received by patients with diabetes. RESULTS: In the initial and revised measures, the authors used EHR automated queries to identify 12,960 and 13,221 patients with diabetes, respectively, in the reporting year. Variations in the measure scores across sites were greater with the initial measure (range, 36.4-71.3%) than with the revised measure (range, 78.8-88.1%). The automated query performed well (93% or higher) for sensitivity, specificity, and positive and negative predictive values for both measures. CONCLUSIONS: The results suggest that an automated EHR-based query can be used successfully to measure the quality of oral health care delivered to patients with diabetes. The authors also found that using the rich data available in EHRs may help estimate the quality of care better than can relying on claims data. PRACTICAL IMPLICATIONS: Detailed clinical patient-level data in dental EHRs may be useful to dentists in evaluating the quality of dental care provided to patients with diabetes.

Dental Students' Clinical Experience Across Three Successive Curricula at One U.S. Dental School.

As dental schools continue to seek the most effective ways to provide clinical education for students, it is important to track the effects innovations have on students' clinical experience to allow for quantitative comparisons of various curricula. The aim of this study was to compare the impact of three successive clinical curricula on students' experience at one U.S. dental school. The three were a discipline-based curriculum (DBC), a comprehensive care curriculum (CCC), and a procedural requirement curriculum plus externships (PRCE). Students' clinic experience data from 1992 to 2013 were analyzed for total experience and in five discipline areas. Clinic experience metrics analyzed were patient visits (PVs), relative value units (RVUs), and equivalent amounts (EQAs). A minimum experience threshold (MET) and a high experience threshold (HET) were set at one standard deviation above and below the mean for the DBC years. Students below the MET were designated as low achievers; students above the HET were designated as high achievers. The results showed significant differences among the three curricula in almost all areas of comparison: total PVs, total EQAs, total RVUs, RVUs by discipline, and number of high and low achievers in total clinical experience and by discipline. The comprehensive care approach to clinical education did not negatively impact students' clinical experience and in many cases enhanced it. The addition of externships also enhanced student total clinical experience although more study is needed to determine their effectiveness. The insights provided by this study suggest that the methodology used including the metrics of PVs, EQAs, and RVUs may be helpful for other dental schools in assessing students' clinical experience.

Honoring Dental Patients' Privacy Rule Right of Access in the Context of Electronic Health Records.

A person's right to access his or her protected health information is a core feature of the U.S. Health Insurance Portability and Accountability Act (HIPAA) Privacy Rule. If the information is stored electronically, covered entities must be able to provide patients with some type of machine-readable, electronic copy of their data. The aim of this study was to understand how academic dental institutions execute the Privacy Rule's right of access in the context of electronic health records (EHRs). A validated electronic survey was distributed to the clinical deans of 62 U.S. dental schools during a two-month period in 2014. The response rate to the survey was 53.2% (N=33). However, three surveys were partially completed, and of the 30 completed surveys, the 24 respondents who reported using axiUm as the EHR at their dental school clinic were the ones on which the results were based (38.7% of total schools at the time). Of the responses analyzed, 86% agreed that clinical modules should be considered part of a patient's dental record, and all agreed that student teaching-related modules should not. Great variability existed among these clinical deans as to whether administrative and financial modules should be considered part of a patient record. When patients request their records, close to 50% of responding schools provide the information exclusively on paper. This study found variation among dental schools in their implementation of the Privacy Rule right of access, and although all the respondents had adopted EHRs, a large number return records in paper format.

How dental team members describe adverse events.

BACKGROUND: Although some patients experience adverse events (AEs) resulting in harm caused by treatments in dentistry, few published reports have detailed how dental providers describe these events. Understanding how dental treatment professionals view AEs is essential to building a safer environment in dental practice. METHODS: The authors interviewed dental professionals and domain experts through focus groups and in-depth interviews and asked them to identify the types of AEs that may occur in dental settings. RESULTS: The initial interview and focus group findings yielded 1,514 items that included both causes and AEs. In total, 632 causes were coded into 1 of the 8 categories of the Eindhoven classification, and 882 AEs were coded into 12 categories of a newly developed dental AE classification. Interrater reliability was moderate among coders. The list was reanalyzed, and duplicate items were removed leaving a total of 747 unique AEs and 540 causes. The most frequently identified AE types were "aspiration and ingestion" at 14% (n = 142), "wrong-site, wrong-procedure, wrong-patient errors" at 13%, "hard-tissue damage" at 13%, and "soft-tissue damage" at 12%. CONCLUSIONS: Dental providers identified a large and diverse list of AEs. These events ranged from "death due to cardiac arrest" to "jaw fatigue from lengthy procedures." PRACTICAL IMPLICATIONS: Identifying threats to patient safety is a key element of improving dental patient safety. An inventory of dental AEs underpins efforts to track, prevent, and mitigate these events.

Near-infrared imaging of secondary caries lesions around composite restorations at wavelengths from 1300-1700-nm.

BACKGROUND AND OBJECTIVES: Current clinical methods for diagnosing secondary caries are unreliable for identifying the early stages of decay around restorative materials. The objective of this study was to access the integrity of restoration margins in natural teeth using near-infrared (NIR) reflectance and transillumination images at wavelengths between 1300 and 1700-nm and to determine the optimal NIR wavelengths for discriminating composite materials from dental hard tissues. MATERIALS AND METHODS: Twelve composite margins (n=12) consisting of class I, II and V restorations were chosen from ten extracted teeth. The samples were imaged in vitro using NIR transillumination and reflectance, polarization sensitive optical coherence tomography (PS-OCT) and a high-magnification digital microscope. Samples were serially sectioned into 200-µm slices for histological analysis using polarized light microscopy (PLM) and transverse microradiography (TMR). Two independent examiners evaluated the presence of demineralization at the sample margin using visible detection with 10× magnification and NIR images presented digitally. Composite restorations were placed in sixteen sound teeth (n=16) and imaged at multiple NIR wavelengths ranging from λ=1300 to 1700-nm using NIR transillumination. The image contrast was calculated between the composite and sound tooth structure. RESULTS: Intensity changes in NIR images at wavelengths ranging from 1300 to 1700-nm correlate with increased mineral loss measured using TMR. NIR reflectance and transillumination at wavelengths coincident with increased water absorption yielded significantly higher (P<0.001) contrast between sound enamel and adjacent demineralized enamel. In addition, NIR reflectance exhibited significantly higher (P<0.01) contrast between sound enamel and adjacent composite restorations than visible reflectance. SIGNIFICANCE: This study shows that NIR imaging is well suited for the rapid screening of secondary caries lesions.

Dental clinical research: an illustration of the value of standardized diagnostic terms.

OBJECTIVE: Secondary data are a significant resource for in-depth epidemiologic and public health research. It also allows for effective quality control and clinical outcomes measurement. To illustrate the value of structured diagnostic entry, a use case was developed to quantify adherence to current practice guidelines for managing chronic moderate periodontitis (CMP). METHODS: Six dental schools using the same electronic health record (EHR) contribute data to a dental data repository (BigMouth) based on the i2b2 data-warehousing platform. Participating institutions are able to query across the full repository without being able to back trace specific data to its originating institution. At each of the three sites whose data are included in this analysis, the Dental Diagnostic System (DDS) terminology was used to document diagnoses in the clinics. We ran multiple queries against this multi-institutional database, and the output was validated by manually reviewing a subset of patient charts. RESULTS: Over the period under study, 1,866 patients were diagnosed with CMP. Of these, 15 percent received only periodontal prophylaxis treatment, 20 percent received only periodontal maintenance treatment, and only 41 percent received periodontal maintenance treatment in combination with other AAP guideline treatments. CONCLUSIONS: Our results showed that most patients with CMP were not treated according to the AAP guidelines. On the basis of this use case, we conclude that the availability and habitual use of a structured diagnosis in an EHR allow for the aggregation and secondary analyses of clinical data to support downstream analyses for quality improvement and epidemiological assessments.

Provider Attitudes Toward the Implementation of Clinical Decision Support Tools in Dental Practice.

PURPOSE: The objective of this paper is to assess clinical dental providers' baseline knowledge and attitudes about the implementation of three clinical decision support (CDS) tools built into the electronic health record (EHR) of a multi-specialty group dental practice. PROCEDURES: An electronic survey designed to examine predisposing factors for acceptance of EHR-based tools, caries and periodontal disease management by risk assessment and a risk assessment-based Proactive Dental Care Plan, was distributed to all Willamette Dental Group (WDG) employees. The survey collected demographic data, along with measures of job experience and satisfaction, comfort with dental information technology, and attitudes and knowledge of each CDS tool. WDG provided data on site-level patient and financing mix, patient satisfaction data, employee role (e.g. dentist) and tenure with company. The survey was conducted 3 months prior to the rollout of the CDS tools in November 2013. The survey was distributed electronically to all WDG employees (n = 1166), of whom 58.5% (n = 682) were clinicians, located in 53 sites in Oregon, Washington and Idaho. The overall response rate was 79.8% (n = 930), with a response rate of 83.1% (n = 567) from all clinicians. Of these, 24.3% were general and specialist dentists (n = 138); 26.6% were dental hygienists (n = 151), and 49% were dental assistants (n = 278). PRINCIPAL FINDINGS: The clinicians surveyed reported being highly amenable to implementation of the three CDS tools. Clinicians' attitudes reflected higher expected improvement in patient care and quality than in business processes due to the implementation. The clinician characteristics most strongly correlated with a positive attitude toward the CDS tool implementation (as measured on Likert scale 1 = low to 5 = high) included satisfaction with the EHR (0.499, p < 0.001), job satisfaction (0.458, p < 0.001), finding change to be exciting (0.398, p < 0.001), degree of control perceived over work (0.352, p < 0.001), and a perception of having adequate tools to get work done (0.340, p < 0.001). Higher reported frequency (scale 1 = never, 7 = always) of feeling burned out (-0.297, p < 0.001), feeling emotionally drained (-0.265, p < 0.001), and feeling work is a strain (-0.205, p < 0.001) had the greatest correlation with negative attitudes. CONCLUSION: This is the first study to examine dental provider attitudes toward the implementation of CDS tools incorporated within an electronic health record. Provider attitudes toward CDS tools can shape the entire implementation process for better or worse. This study contributes to the literature by providing an understanding of factors related to positive attitudes at the outset of a system change and can help guide organizational administrators to better prepare their workforce and organization for adoption of evidence-based dentistry tools such as a CDS system.

The dangers of dental devices as reported in the Food and Drug Administration Manufacturer and User Facility Device Experience Database.

BACKGROUND: The authors conducted a study to determine the frequency and type of adverse events (AEs) associated with dental devices reported to the Food and Drug Administration Manufacturer and User Facility Device Experience (MAUDE) database. METHODS: The authors downloaded and reviewed the dental device-related AEs reported to MAUDE from January 1, 1996, through December 31,2011. RESULTS: MAUDE received a total of 1,978,056 reports between January 1, 1996, and December 31, 2011. Among these reports, 28,046 (1.4%) AE reports were associated with dental devices. Within the dental AE reports that had event type information, 17,261 reported injuries, 7,777 reported device malfunctions, and 66 reported deaths. Among the 66 entries classified as death reports, 52 reported a death in the description; the remaining were either misclassified or lacked sufficient information in the report to determine whether a death had occurred. Of the dental device-associated AEs, 53.5% pertained to endosseous implants. CONCLUSIONS: A plethora of devices are used in dental care. To achieve Element 1 of Agency for Healthcare Research and Quality's Patient Safety Initiative, clinicians and researchers must be able to monitor the safety of dental devices. Although MAUDE was identified by the authors as essentially the sole source of this valuable information on adverse events, their investigations led them to conclude that MAUDE had substantial limitations that prevent it from being the broad-based patient safety sentinel the profession requires. PRACTICAL IMPLICATIONS: As potential contributors to MAUDE, dental care teams play a key role in improving the profession's access to information about the safety of dental devices.

Open wide: looking into the safety culture of dental school clinics.

Although dentists perform highly technical procedures in complex environments, patient safety has not received the same focus in dentistry as in medicine. Cultivating a robust patient safety culture is foundational to minimizing patient harm, but little is known about how dental teams view patient safety or the patient safety culture within their practice. As a step toward rectifying that omission, the goals of this study were to benchmark the patient safety culture in three U.S. dental schools, identifying areas for improvement. The extensively validated Medical Office Survey on Patient Safety Culture (MOSOPS), developed by the Agency for Healthcare Research and Quality, was administered to dental faculty, dental hygienists, dental students, and staff at the three schools. Forty-seven percent of the 328 invited individuals completed the survey. The "Teamwork" category received the highest marks and "Patient Care Tracking and Follow-Up" and "Leadership Support for Patient Safety" the lowest. Only 48 percent of the respondents rated systems and processes in place to prevent/catch patient problems as good/excellent. All patient safety dimensions received lower marks than in medical practices. These findings and the inherent risk associated with dental procedures lead to the conclusion that dentistry in general, and academic dental clinics in particular, stands to benefit from an increased focus on patient safety. This first published use of the MOSOPS in a dental clinic setting highlights both clinical and educational priorities for improving the safety of care in dental school clinics.