Theta and alpha oscillations may underlie improved attention and working memory in musically trained children.

INTRODUCTION: Attention and working memory are key cognitive functions that allow us to select and maintain information in our mind for a short time, being essential for our daily life and, in particular, for learning and academic performance. It has been shown that musical training can improve working memory performance, but it is still unclear if and how the neural mechanisms of working memory and particularly attention are implicated in this process. In this work, we aimed to identify the oscillatory signature of bimodal attention and working memory that contributes to improved working memory in musically trained children. MATERIALS AND METHODS: We recruited children with and without musical training and asked them to complete a bimodal (auditory/visual) attention and working memory task, whereas their brain activity was measured using electroencephalography. Behavioral, time-frequency, and source reconstruction analyses were made. RESULTS: Results showed that, overall, musically trained children performed better on the task than children without musical training. When comparing musically trained children with children without musical training, we found modulations in the alpha band pre-stimuli onset and the beginning of stimuli onset in the frontal and parietal regions. These correlated with correct responses to the attended modality. Moreover, during the end phase of stimuli presentation, we found modulations correlating with correct responses independent of attention condition in the theta and alpha bands, in the left frontal and right parietal regions. CONCLUSIONS: These results suggest that musically trained children have improved neuronal mechanisms for both attention allocation and memory encoding. Our results can be important for developing interventions for people with attention and working memory difficulties.

Comparison of round and knife-edge-like cathodes on gas-puff implosions.

Preionization is believed to play an important role on the implosion of gas-puff Z pinches. Some experiments have used an external preionization source, e.g., UV light or electron beam. In contrast, other experiments rely completely on over voltage breakdown by the own generator's voltage pulse. However, this approach lacks shot-to-shot reproducibility since self-breakdown is mainly a stochastic process. In this work, we performed a systematic study on self-breakdown using two different cathode geometries: (i) a smooth, round cathode to provide a homogeneous electric field, (ii) a sharp, knife-edge-like geometry to enhance the electric field locally and eventually electron emission. The experiments were carried out on the Llampudken current generator, which provides a current pulse of ∼400kA amplitude and 200 ns rise time (10%-90%). We implemented gated XUV imaging, filtered diodes and time-integrated x-ray imaging to obtain information about the implosion as well as the stagnation phase for the two cathode geometries. We found that erosion of the knife-edge cathode might be a serious problem, and we had to replace it every 15 shots. On the other hand, the round cathode lasted for the whole series of experiments. We also measured a more reproducible and larger peak current for the knife cathode. From the photo-conductive detectors we observed that even if the round cathode might present shots with higher x-ray yield compared to the knife cathode, dispersion is almost twice as large. Moreover, after a statistic analysis, it is demonstrated that the dispersion in the yield is due solely to differences imposed by the cathodes and not to variations in the driver, as no correlation was found between them. We found that in order to fit the experimental data with the snowplow model, only ∼60% of the total mass is compressed in the knife cathode while ∼20% for the round one, highlighting the importance of the cathode and preionization. Therefore, we conclude that the use of the knife cathode increases the reproducibility of the experiment in comparison with the round cathode.

Structural Analysis of Cu+ and Cu2+ Ions in Zeolite as a Nanoreactor with Antibacterial Applications.

In this work, we report the structural analysis of Cu+ and Cu2+ ions in zeolite as a nanoreactor with antibacterial applications. A simple one-step process was implemented to obtain Cu ions in zeolite A (ZA4) by controlling the temperature in the solutions to guarantee the ions' stability. Samples were characterized by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and Fourier transform infrared (FT-IR) spectroscopy, showing the characteristic zeolite elements as well as the characteristic bands with slight modifications in the chemical environment of the zeolite nanoreactor attributed to Cu ions by FT-IR spectroscopy. In addition, a shift of the characteristic peaks of ZA4 in X-ray diffraction was observed as well as a decrease in relative peak intensity. On the other hand, the antibacterial activity of Cu ions in the zeolite nanoreactor was evaluated.

Bayesian inference of plasma parameters from collective Thomson scattering technique on a gas-puff near stagnation.

The Collective Thomson scattering technique has been implemented to study the stagnation of a single liner gas-puff. The plasma parameters are determined by theoretically modelling the scattering form factor in combination with Bayesian inference to provide the set of the most probable parameters that describe the experimental data. Analysis of the data reveal that incoming flows are able to interpenetrate partially. Estimation of the mean free path shows a gradual transition from a weakly collisional to a collisional regime as the plasma gets to the axis. Furthermore, we find that the ion energy at [Formula: see text] is [Formula: see text] and is mostly kinetic in nature and represents [Formula: see text] of the total energy. This kinetic energy is far greater than the value on axis of [Formula: see text] which is [Formula: see text] of the total energy. Energy transfer to the electrons and radiation losses are found to be negligible by this time. A possible explanation for this energy imbalance is the presence of an azimuthal magnetic field larger than [Formula: see text] that deflect the ions vertically. The uncertainties quoted represent 68% credible intervals.

Structural characterization, stability, and cytocompatibility study of chitosan BaTiO3@ZnO:Er heterostructures.

New imaging agents are required in cancer diagnosis to enhance the diagnostic accuracy, classification, and therapeutic management of tumors. Nanomaterials have emerged as a promising alternative to developing new nanostructures with imaging applications. In this study, a heterostructure based on barium titanate (BT), zinc oxide (ZnO), and erbium (Er) was prepared and coated with Chitosan (CS) to investigate their stability and compatibility with biological systems. The structure, particle morphology, luminescence properties, stability, and cytotoxicity of different nanoparticles (NPs) were assessed. The results demonstrated the formation of a [BT@ZnO:Er]-CS heterostructure, which is consistent with the relative intensities and positions of peaks in the X-ray diffraction (XRD) with an average crystallite size of ~76 nm. The electrokinetic measurement results indicate that the coated NPs are the most stable and have an average size close to 200 nm when the pH is between 3 and 5. Finally, we presented a cytotoxicity study of naked and CS-coated NPs. The results indicate that naked NPs exhibit varying cellular toxicity, as indicated by decreased cell viability, morphological changes, and an increase in an apoptotic marker. The CS-coated NPs prevented the cytotoxic effect of the naked NPs, demonstrating the significance of CS as a stabilizing agent.

A pilot study on bacterial isolates associated with purulent vaginal discharge in dairy cows in the south-west region of Western Australia.

This study aimed to determine the bacterial isolates associated with postpartum endometritis among dairy cows in Western Australia and their antimicrobial susceptibility profiles. A cross-sectional study was conducted between June-October 2020. Endometritis was defined as evidence of mucopurulent to purulent vaginal discharge 60-100 days postpartum. Vaginal discharge samples were obtained, cultured, identified and tested for antimicrobial susceptibility. A total of 118 bacterial isolates were grown from 46 animals, representing 36 species. The bacteria isolated from both aerobic and anaerobic cultures included Bacillus (60.2%), Streptococcus (12.7%), Trueperella (10.1%), Escherichia (6.7%) and Staphylococcus (5.9%). The remaining genera <5% were Histophilus, Aeroccocus, Enterococcus and Moraxella. Resistance was variable between isolates, but the highest resistance levels were observed in Streptococcal and Bacillus isolates to enrofloxacin, clindamycin and erythromycin, respectively. All Streptococcal isolates exhibited 100% resistance to enrofloxacin, and the greatest resistance levels were found in Streptococcus luteinises to trimethoprim-sulfamethoxazole 83%, clindamycin 66% and 33% quinupristin-dalfopristin. There was 84.5% resistance to clindamycin and 35.2% to erythromycin in the Bacillus isolates, with the highest resistance found in Bacillus licheniformis and Bacillus subtilis. Escherichia coli exhibited 12.5% resistance to gentamycin, ceftiofur, whereas amoxicillin-clavulanic acid exhibited 37.5%. Within the Staphylococcal isolates, 28.5%, 28.5%, 42.8% and 14.2% resistance to ceftiofur, erythromycin, cefoxitin, penicillin and tetracycline were observed, respectively. The presence of resistance to important antimicrobials for human use, such as cephalosporins, macrolides and fluoroquinolones, highlights the need for judicious use of antimicrobials in dairy cattle.

α-Glucosidase inhibitory phenolics from Echeveria subrigida (B. L. Rob & Seaton) leaves.

Echeveria subrigida is native to Mexico and its methanol extract (ME) shows relevant biological activities for human health, including the α-glucosidase inhibitory (αGI) activity that suggests its antidiabetic potential. Fractionation of the ME based on the αGI activity (IC50 in µg/mL) showed that quercetin-3-O-ß-glucoside (131.1), isorhamnetin-3-O-ß-glucoside (166.4), and dimers to heptamers proanthocyanidins (9.6) were among the main responsible of αGI activity in the ME. The purified compounds showed better activity than acarbose (IC50 = 4426 µg/mL).

Role of collisionality and radiative cooling in supersonic plasma jet collisions of different materials.

Currently there is considerable interest in creating scalable laboratory plasmas to study the mechanisms behind the formation and evolution of astrophysical phenomena such as Herbig-Haro objects and supernova remnants. Laboratory-scaled experiments can provide a well diagnosed and repeatable supplement to direct observations of these extraterrestrial objects if they meet similarity criteria demonstrating that the same physics govern both systems. Here, we present a study on the role of collision and cooling rates on shock formation using colliding jets from opposed conical wire arrays on a compact pulsed-power driver. These diverse conditions were achieved by changing the wire material feeding the jets, since the ion-ion mean free path (λ_{mfp-ii}) and radiative cooling rates (P_{rad}) increase with atomic number. Low Z carbon flows produced smooth, temporally stable shocks. Weakly collisional, moderately cooled aluminum flows produced strong shocks that developed signs of thermal condensation instabilities and turbulence. Weakly collisional, strongly cooled copper flows collided to form thin shocks that developed inconsistently and fragmented. Effectively collisionless, strongly cooled tungsten flows interpenetrated, producing long axial density perturbations.

Adipose invasion of muscle in Wagyu cattle: Monitoring by histology and melting temperature.

Remarkably, Wagyu cattle progressively desaturate intramuscular and subcutaneous fat leading to melting temperatures (Tm) well below 38°C. In parallel, the adipose tissue expands, arborises and invades the muscle. The process is aggressive in that it leads to loss of myofibres resulting in much smaller fascicles and therefore fine marbling or snowflaking. The "Microscopic score" appears to be an excellent measure of marbling especially for lesser and greater degrees which are not quantified reliably by others methods. By comparing muscle groups, we conclude that the tailhead is a suitable site for sequential monitoring. Melting temperatures of intramuscular and subcutaneous tissue are also useful.

Gated liquid scintillator detector for neutron time of flight measurements in a gas-puff Z-pinch experiment.

Detection of secondary D(t, n)4He neutrons produced when thin argon or krypton gas shells implode on a deuterium gas target is a very challenging task because the secondary neutron yield is a small fraction of the primary neutron yield and because the implosion is often accompanied by an intense hard X-ray burst. We built a large volume neutron time of flight (nTOF) detector using liquid scintillator (xylene solvent with small quantities of wavelength shifting PPO + bis-MSB fluors) in an attempt to increase the detection probability for secondary neutrons in our staged Z-pinch experiments at the 1 MA Zebra pulsed-power generator. Two fast, gated microchannel plate photomultiplier tubes detect the light created in 21 liters of liquid. The hard X-rays were successfully suppressed in the recorded nTOF traces, but we found no evidence of secondary neutrons. The signal quality from the primary D(d, n)3He neutrons was higher compared to the signal quality from a plastic scintillator nTOF, thus providing a more reliable estimate of the deuterium ion temperature at the pinch stagnation time. Cross-calibration with a silver activation detector enables standalone neutron yield measurement.

Production of γ-aminobutyric acid (GABA) by lactic acid bacteria strains isolated from traditional, starter-free dairy products made of raw milk.

γ-Aminobutyric acid (GABA), an amino acid not used in protein synthesis, intervenes in several physiological functions and has both diuretic and calming effects in humans. Lactic acid bacteria (LAB) strains that produce GABA could be exploited for the manufacture of health-promoting GABA-enriched dairy products. In this study, 262 LAB strains isolated from traditional dairy products made from raw milk without starter cultures were screened for GABA production in culture media supplemented with 1% monosodium glutamate (MSG) using an enzymatic (GABase) method. About half of the strains (123) were found to be GABA producers. Of these, 24, among which were 16 Lactococcus lactis subsp. lactis and three Streptococcus thermophilus strains, produced >1 mM of GABA (range 1.01-2.81 mM) and were selected for further characterisation. GABA production was confirmed in most strains by culturing in 5 mM MSG followed by HPLC quantification. A majority of the strains were confirmed to be GABA producers by this method, although lower production levels were recorded. Using species-specific primers, the gene encoding glutamate decarboxylase (GAD) was PCR-amplified in all but one of the GABA producers analysed. Amplicons sequences were compared to one another and to those held in databases. Except for one Lactobacillus brevis strain, none of the 24 GABA producers investigated produced toxic biogenic amines, such as tyramine, histamine or cadaverine. They were therefore considered safe. Either alone, in mixtures, or in combination with industrial starter or adjunct cultures, these strains might be useful in the development of health-oriented dairy products.

Laser-induced electrical signal filtering by multilayer reduced graphene oxide decorated with Au nanoparticles.

Nanoscale plasmonic particles represent a crucial transformation on optical and electronic properties exhibited by advanced materials. Herein are reported remarkable interferometric optical effects with dependence on polarization for filtering or modulating electronic signals in multilayer nanostructures. Metallic nanoparticles were incorporated in randomly distributed networks of reduced graphene oxide by an in-situ vapor-phase deposition method. The polarization-selectable nonlinear optical absorption contribution on the photoconductivity of reduced graphene oxide decorated with gold nanoparticles was analyzed. Nanosecond pulses at 532 nm wavelength were employed in a two-wave mixing experiment to study photoconduction and nonlinear optical absorption in this nanohybrid material. The ablation threshold of the sample was measured in 0.4 J/cm2. Electrochemical impedance spectroscopy measurements revealed a capacitive response that can be enhanced by gold decoration in carbon nanostructures. A strong two-photon absorption process characterized by 5 × 10-7 m/W was identified as a physical mechanism responsible for the nonlinear photoconductive behavior of the nanostructures. Experimental shift of 1 MHz for the cutoff frequency associated with an electrical filter function performed by the sample in film form was demonstrated. Moreover, amplitude modulation of electronic signals controlled by the polarization of a two-wave mixing experiment was proposed. All-optical and optoelectronic nanosystems controlled by multi-photonic interactions in carbon-based materials were discussed. The key role of the vectorial nature of light in two-wave mixing experiments is a fascinating tool for the exploration of low-dimensional systems.

Measurement of temperature and density using non-collective X-ray Thomson scattering in pulsed power produced warm dense plasmas.

We present the first experimental measurement of temperature and density of a warm dense plasma produced by a pulsed power driver at the Nevada Terawatt Facility (NTF). In the early phases of discharge, most of the mass remains in the core, and it has been challenging to diagnose with traditional methods, e.g. optical probing, because of the high density and low temperature. Accurate knowledge of the transport coefficients as well as the thermodynamic state of the plasma is important to precisely test or develop theoretical models. Here, we have used spectrally resolved non-collective X-ray Thomson scattering to characterize the dense core region. We used a graphite load driven by the Zebra current generator (0.6 MA in 200 ns rise time) and the Ti He-α line produced by irradiating a Ti target with the Leopard laser (30 J, 0.8 ns) as an X-ray probing source. Using this configuration, we obtained a signal-to-noise ratio ~2.5 for the scattered signal. By fitting the experimental data with predicted spectra, we measured T = 2±1.9 eV, ρ = 0.6±0.5 gr/cc, 70 ns into the current pulse. The complexity of the dense core is revealed by the electrons in the dense core that are found to be degenerate and weakly coupled, while the ions remain highly coupled.

Injector design for liner-on-target gas-puff experiments.

We present the design of a gas-puff injector for liner-on-target experiments. The injector is composed of an annular high atomic number (e.g., Ar and Kr) gas and an on-axis plasma gun that delivers an ionized deuterium target. The annular supersonic nozzle injector has been studied using Computational Fluid Dynamics (CFD) simulations to produce a highly collimated (M > 5), ∼1 cm radius gas profile that satisfies the theoretical requirement for best performance on ∼1-MA current generators. The CFD simulations allowed us to study output density profiles as a function of the nozzle shape, gas pressure, and gas composition. We have performed line-integrated density measurements using a continuous wave (CW) He-Ne laser to characterize the liner gas density. The measurements agree well with the CFD values. We have used a simple snowplow model to study the plasma sheath acceleration in a coaxial plasma gun to help us properly design the target injector.

Human platelet interaction with E. coli O111 promotes tissue-factor-dependent procoagulant activity, involving Toll like receptor 4.

Platelets have a major role in clotting activation and contribute to the innate immune response during systemic infections. Human platelets contain tissue factor (TF) and express functional Toll-like receptor 4 (TLR4). However, the role of TLR4 in triggering the procoagulant properties of platelets, upon challenge with bacteria, is yet unknown. Our hypothesis is that E. coli O111-TLR4 interaction activates platelets and elicits their procoagulant activity. We demonstrated that the strain, but not ultrapure LPS, increased surface P-selectin expression, platelet dependent TF procoagulant activity (TF-PCA) and prompted a faster thrombin generation (TG). Blockade of TLR4 resulted in decreased platelet activation, TF-PCA and TG, revealing the participation of this immune receptor on the procoagulant response of platelets. Our results provide a novel mechanism by which individuals with bacterial infections would have an increased incidence of blood clots. Furthermore, the identification of platelet TF and TLR4 as regulators of the effect of E. coli O111 might represent a novel therapeutic target to reduce the devastating consequences of the hemostatic disorder during sepsis.

Growth and enzymatic activity of Leucoagaricus gongylophorus, a mutualistic fungus isolated from the leaf-cutting ant Atta mexicana, on cellulose and lignocellulosic biomass.

A mutualistic fungus of the leaf-cutting ant Atta mexicana was isolated and identified as Leucoagaricus gongylophorus. This isolate had a close phylogenetic relationship with L. gongylophorus fungi cultivated by other leaf-cutting ants as determined by ITS sequencing. A subcolony started with ~500 A. mexicana workers could process 2 g day-1 of plant material and generate a 135 cm3 fungus garden in 160 days. The presence of gongylidia structures of ~35 µm was observed on the tip of the hyphae. The fungus could grow without ants on semi-solid cultures with α-cellulose and microcrystalline cellulose and in solid-state cultures with grass and sugarcane bagasse, as sole sources of carbon. The maximum CO2 production rate on grass (Vmax  = 17·5 mg CO2  Lg-1  day-1 ) was three times higher than on sugarcane bagasse (Vmax  = 6·6 mg CO2  Lg-1 day-1 ). Recoveries of 32·9 mgglucose  gbiomass-1 and 12·3 mgglucose  gbiomass-1 were obtained from the fungal biomass and the fungus garden, respectively. Endoglucanase activity was detected on carboxymethylcellulose agar plates. This is the first study reporting the growth of L. gongylophorus from A. mexicana on cellulose and plant material. SIGNIFICANCE AND IMPACT OF THE STUDY: According to the best of our knowledge, this is the first report about the growth of Leucoagaricus gongylophorus, isolated from the colony of the ant Atta mexicana, on semisolid medium with cellulose and solid-state cultures with lignocellulosic materials. The maximum CO2 production rate on grass was three times higher than on sugarcane bagasse. Endoglucanase activity was detected and it was possible to recover glucose from the fungal gongylidia. The cellulolytic activity could be used to process lignocellulosic residues and obtain sugar or valuable products, but more work is needed in this direction.

Antimicrobial resistance patterns of bovine Salmonella enterica isolates submitted to the Wisconsin Veterinary Diagnostic Laboratory: 2006-2015.

Salmonellosis on the dairy continues to have a significant effect on animal health and productivity and in the United States. Additionally, Salmonella enterica ssp. enterica causes an estimated 1.2 million cases of human illness annually. Contributing to the morbidity and mortality in both human and domestic animal species is emergence of antimicrobial resistance by Salmonella species and increased incidence of multidrug-resistant isolates. This study describes serotype distribution and the antimicrobial resistance patterns for various Salmonella serotypes isolated from bovine samples submitted to the Wisconsin Veterinary Diagnostic Laboratory (WVDL) over the past 10 yr. Salmonella serotyping and antimicrobial susceptibility testing data were obtained from the laboratory information management system at WVDL. Data from accessions were limited to bovine samples submitted to the WVDL between January 2006 and June 2015 and those that had both a definitive serotype and complete results for antimicrobial susceptibility testing. A total of 4,976 isolates were identified. Salmonella enterica ser. Dublin was the most prevalent serotype identified among bovine samples submitted to the WVDL, accounting for a total of 1,153 isolates (23% of total isolates) over the study period. Along with Dublin, Salmonella enterica ser. Cerro (795, 16%), Newport (720, 14%), Montevideo (421, 8%), Kentucky (419, 8%), and Typhimurium (202, 4%) comprised the top 6 most commonly isolated serotypes during that time. Overall, resistance of bovine Salmonella isolates in the study population remained stable, although decreases in resistance were noted for gentamicin, neomycin, and trimethoprim sulfamethoxazole during the study period. All isolates remained susceptible to enrofloxacin. These data show that antimicrobial susceptibility for bovine Salmonella has changed in the population served by WVDL in the past 10 yr. This information is important for understanding Salmonella disease ecology in Wisconsin. Our findings are also relevant for animal and public health by improving informed antimicrobial use, new drug development, and regulation of their use in food animals.

Leishmania vaccine development: exploiting the host-vector-parasite interface.

Visceral leishmaniasis (VL) is a disease transmitted by phlebotomine sand flies, fatal if untreated, and with no available human vaccine. In rodents, cellular immunity to Leishmania parasite proteins as well as salivary proteins of the sand fly is associated with protection, making them worthy targets for further exploration as vaccines. This review discusses the notion that a combination vaccine including Leishmania and vector salivary antigens may improve vaccine efficacy by targeting the parasite at its most vulnerable stage just after transmission. Furthermore, we put forward the notion that better modeling of natural transmission is needed to test efficacy of vaccines. For example, the fact that individuals living in endemic areas are exposed to sand fly bites and will mount an immune response to salivary proteins should be considered in pre-clinical and clinical evaluation of leishmaniasis vaccines. Nevertheless, despite remaining obstacles there is good reason to be optimistic that safe and effective vaccines against leishmaniasis can be developed.

Leishmania tarentolae secreting the sand fly salivary antigen PpSP15 confers protection against Leishmania major infection in a susceptible BALB/c mice model.

Cutaneous leishmaniasis is a zoonotic, vector-borne disease causing a major health problem in several countries. No vaccine is available and there are limitations associated with the current therapeutic regimens. Immune responses to sand fly saliva have been shown to protect against Leishmania infection. A cellular immune response to PpSP15, a protein from the sand fly Phlebotomus papatasi, was sufficient to control Leishmania major infection in mice. This work presents data supporting the vaccine potency of recombinant live non-pathogenic Leishmania (L.) tarentolae secreting PpSP15 in mice and its potential as a new vaccine strategy against L. major. We generated a recombinant L. tarentolae-PpSP15 strain delivered in the presence of CpG ODN and evaluated its immunogenicity and protective immunity against L. major infection in BALB/c mice. In parallel, different vaccination modalities using PpSP15 as the target antigen were compared. Humoral and cellular immune responses were evaluated before and at three and eight weeks after challenge. Footpad swelling and parasite load were assessed at eight and eleven weeks post-challenge. Our results show that vaccination with L. tarentolae-PpSP15 in combination with CpG as a prime-boost modality confers strong protection against L. major infection that was superior to other vaccination modalities used in this study. This approach represents a novel and promising vaccination strategy against Old World cutaneous leishmaniasis.

Adaptive neural network motion control of manipulators with experimental evaluations.

A nonlinear proportional-derivative controller plus adaptive neuronal network compensation is proposed. With the aim of estimating the desired torque, a two-layer neural network is used. Then, adaptation laws for the neural network weights are derived. Asymptotic convergence of the position and velocity tracking errors is proven, while the neural network weights are shown to be uniformly bounded. The proposed scheme has been experimentally validated in real time. These experimental evaluations were carried in two different mechanical systems: a horizontal two degrees-of-freedom robot and a vertical one degree-of-freedom arm which is affected by the gravitational force. In each one of the two experimental set-ups, the proposed scheme was implemented without and with adaptive neural network compensation. Experimental results confirmed the tracking accuracy of the proposed adaptive neural network-based controller.