Oxygen-resistant [FeFe]hydrogenases: new biocatalysis tools for clean energy and cascade reactions.

The use of enzymes to generate hydrogen, instead of using rare metal catalysts, is an exciting area of study in modern biochemistry and biotechnology, as well as biocatalysis driven by sustainable hydrogen. Thus far, the oxygen sensitivity of the fastest hydrogen-producing/exploiting enzymes, [FeFe]hydrogenases, has hindered their practical application, thereby restricting innovations mainly to their [NiFe]-based, albeit slower, counterparts. Recent exploration of the biodiversity of clostridial hydrogen-producing enzymes has yielded the isolation of representatives from a relatively understudied group. These enzymes possess an inherent defense mechanism against oxygen-induced damage. This discovery unveils fresh opportunities for applications such as electrode interfacing, biofuel cells, immobilization, and entrapment for enhanced stability in practical uses. Furthermore, it suggests potential combinations with cascade reactions for CO2 conversion or cofactor regeneration, like NADPH, facilitating product separation in biotechnological processes. This work provides an overview of this new class of biocatalysts, incorporating unpublished protein engineering strategies to further investigate the dynamic mechanism of oxygen protection and to address crucial details remaining elusive such as still unidentified switching hot-spots and their effects. Variants with improved kcat as well as chimeric versions with promising features to attain gain-of-function variants and applications in various biotechnological processes are also presented.

Hydrogen production pathways in Clostridia and their improvement by metabolic engineering.

Biological production of hydrogen has a tremendous potential as an environmentally sustainable technology to generate a clean fuel. Among the different available methods to produce biohydrogen, dark fermentation features the highest productivity and can be used as a means to dispose of organic waste biomass. Within this approach, Clostridia have the highest theoretical H2 production yield. Nonetheless, most strains show actual yields far lower than the theoretical maximum: improving their efficiency becomes necessary for achieving cost-effective fermentation processes. This review aims at providing a survey of the metabolic network involved in H2 generation in Clostridia and strategies used to improve it through metabolic engineering. Together with current achievements, a number of future perspectives to implement these results will be illustrated.

Cascade reactions with two non-physiological partners for NAD(P)H regeneration via renewable hydrogen.

An attractive application of hydrogenases, combined with the availability of cheap and renewable hydrogen (i.e., from solar and wind powered electrolysis or from recycled wastes), is the production of high-value electron-rich intermediates such as reduced nicotinamide adenine dinucleotides. Here, the capability of a very robust and oxygen-resilient [FeFe]-hydrogenase (CbA5H) from Clostridium beijerinckii SM10, previously identified in our group, combined with a reductase (BMR) from Bacillus megaterium (now reclassified as Priestia megaterium) was tested. The system shows a good stability and it was demonstrated to reach up to 28 ± 2 nmol NADPH regenerated s-1 mg of hydrogenase-1 (i.e., 1.68 ± 0.12 U mg-1, TOF: 126 ± 9 min-1) and 0.46 ± 0.04 nmol NADH regenerated s-1 mg of hydrogenase-1 (i.e., 0.028 ± 0.002 U mg-1, TOF: 2.1 ± 0.2 min-1), meaning up to 74 mg of NADPH and 1.23 mg of NADH produced per hour by a system involving 1 mg of CbA5H. The TOF is comparable with similar systems based on hydrogen as regenerating molecule for NADPH, but the system is first of its kind as for the [FeFe]-hydrogenase and the non-physiological partners used. As a proof of concept a cascade reaction involving CbA5H, BMR and a mutant BVMO from Acinetobacter radioresistens able to oxidize indole is presented. The data show how the cascade can be exploited for indigo production and multiple reaction cycles can be sustained using the regenerated NADPH.

A safety cap protects hydrogenase from oxygen attack.

[FeFe]-hydrogenases are efficient H2-catalysts, yet upon contact with dioxygen their catalytic cofactor (H-cluster) is irreversibly inactivated. Here, we combine X-ray crystallography, rational protein design, direct electrochemistry, and Fourier-transform infrared spectroscopy to describe a protein morphing mechanism that controls the reversible transition between the catalytic Hox-state and the inactive but oxygen-resistant Hinact-state in [FeFe]-hydrogenase CbA5H of Clostridium beijerinckii. The X-ray structure of air-exposed CbA5H reveals that a conserved cysteine residue in the local environment of the active site (H-cluster) directly coordinates the substrate-binding site, providing a safety cap that prevents O2-binding and consequently, cofactor degradation. This protection mechanism depends on three non-conserved amino acids situated approximately 13 Å away from the H-cluster, demonstrating that the 1st coordination sphere chemistry of the H-cluster can be remote-controlled by distant residues.

Biochemical features of dye-decolorizing peroxidases: Current impact on lignin degradation.

Dye-decolorizing peroxidases (DyP) were originally discovered in fungi for their ability to decolorize several different industrial dyes. DyPs catalyze the oxidation of a variety of substrates such as phenolic and nonphenolic aromatic compounds. Catalysis occurs in the active site or on the surface of the enzyme depending on the size of the substrate and on the existence of radical transfer pathways available in the enzyme. DyPs show the typical features of heme-containing enzymes with a Soret peak at 404-408 nm. They bind hydrogen peroxide that leads to the formation of the so-called Compound I, the key intermediate for catalysis. This then decays into Compound II yielding back Fe(III) at its resting state. Each catalytic cycle uses two electrons from suitable electron donors and generates two product molecules. DyPs are classified as a separate class of peroxidases. As all peroxidases they encompass a conserved histidine that acts as the fifth heme ligand, however all primary DyP sequences contain a conserved GxxDG motif and a distal arginine that is their characteristic. Given their ability to attack monomeric and dimeric lignin model compounds as well as polymeric lignocellulose, DyPs are a promising class of biocatalysts for lignin degradation that not only represents a source of valuable fine chemicals, but it also constitutes a fundamental step in biofuels production. Research efforts are envisioned for the improvement of the activity of DyPs against lignin, through directed evolution, ration protein design, or one-pot combination with other enzymes to reach satisfactory conversion levels for industrial applications.

Effect of sildenafil on human aromatase activity: From in vitro structural analysis to catalysis and inhibition in cells.

Aromatase catalyses the conversion of androgens into estrogens and is a well-known target for breast cancer therapy. As it has been suggested that its activity is affected by inhibitors of phosphodiesterase-5, this work investigates the potential interaction of sildenafil with aromatase. This is carried out both at molecular level through structural and kinetics assays applied to the purified enzyme, and at cellular level using neuronal and breast cancer cell lines. Sildenafil is found to bind to aromatase with a KD of 0.58±0.05µM acting as a partial and mixed inhibitor with a maximal inhibition of 35±2%. Hyperfine sublevel correlation spectroscopy and docking studies show that sildenafil binds to the heme iron via its 6th axial water ligand. These results also provide information on the starting molecular scaffold for the development of new generations of drugs designed to inhibit aromatase as well as phosphodiesterase-5, a new emerging target for breast cancer therapy.

Oxygen Stability in the New [FeFe]-Hydrogenase from Clostridium beijerinckii SM10 (CbA5H).

The newly isolated Clostridium beijerinckii [FeFe]-hydrogenase CbA5H was characterized by Fourier transform infrared spectroscopy coupled to enzymatic activity assays. This showed for the first time that in this enzyme the oxygen-sensitive active state Hox can be simply and reversibly converted to the oxygen-stable inactive Hinact state. This suggests that oxygen sensitivity is not an intrinsic feature of the catalytic center of [FeFe]-hydrogenases (H-cluster), opening new challenging perspectives on the oxygen sensitivity mechanism as well as new possibilities for exploitation in industrial applications.

Biohydrogen and biomethane production sustained by untreated matrices and alternative application of compost waste.

Biohydrogen and biomethane production offers many advantages for environmental protection over the fossil fuels or the existing physical-chemical methods for hydrogen and methane synthesis. The aim of this study is focused on the exploitation of several samples from the composting process: (1) a mixture of waste vegetable materials ("Mix"); (2) an unmatured compost sample (ACV15); and (3) three types of green compost with different properties and soil improver quality (ACV1, ACV2 and ACV3). These samples were tested for biohydrogen and biomethane production, thus obtaining second generation biofuels and resulting in a novel possibility to manage renewable waste biomasses. The ability of these substrates as original feed during dark fermentation was assayed anaerobically in batch, in glass bottles, in order to determine the optimal operating conditions for hydrogen and/or methane production using "Mix" or ACV1, ACV2 or ACV3 green compost and a limited amount of water. Hydrogen could be produced with a fast kinetic in the range 0.02-2.45mLH2g(-1)VS, while methane was produced with a slower kinetic in the range 0.5-8mLCH4g(-1)VS. It was observed that the composition of each sample influenced significantly the gas production. It was also observed that the addition of different water amounts play a crucial role in the development of hydrogen or methane. This parameter can be used to push towards the alternative production of one or another gas. Hydrogen and methane production was detected spontaneously from these matrices, without additional sources of nutrients or any pre-treatment, suggesting that they can be used as an additional inoculum or feed into single or two-stage plants. This might allow the use of compost with low quality as soil improver for alternative and further applications.

Characterization of a new Baeyer-Villiger monooxygenase and conversion to a solely N-or S-oxidizing enzyme by a single R292 mutation.

BACKGROUND: Ar-BVMO is a recently discovered Baeyer-Villiger monooxygenase from the genome of Acinetobacter radioresistens S13 closely related to medically relevant ethionamide monooxygenase EtaA (prodrug activator) and capable of inactivating the imipenem antibiotic. METHODS: The co-substrate preference as well as steady-state and rapid kinetics studies of the recombinant purified protein were carried out using stopped-flow spectroscopy under anaerobic and aerobic conditions. Kd values were measured by isothermal calorimetry. Enzymatic activity was determined by measuring the amount of product formed using high pressure liquid chromatography or gas chromatography. Site-directed mutagenesis experiments were performed to decipher the role of the active site arginine-292. RESULTS: Ar-BVMO was found to oxidize ethionamide as well as linear ketones. Mechanistic studies on the wild type enzyme using stopped-flow spectroscopy allowed for the detection of the characteristic oxygenating C4a-(hydro)peroxyflavin intermediate, which decayed rapidly in the presence of the substrate. Replacement of arginine 292 in Ar-BVMO by glycine or alanine resulted in greatly reduced or no Baeyer-Villiger activity, respectively, demonstrating the crucial role of this residue in catalysis of ketone substrates. However, both the R292A and R292G mutants are capable of carrying out N- and S-oxidation reactions. CONCLUSIONS: Substrate profiling of Ar-BVMO confirms its close relationship to EtaA; ethionamide is one of its substrates. The active site Arginine 292 is required for its Baeyer-Villiger activity but not for heteroatom oxidation. GENERAL SIGNIFICANCE: A single mutation converts Ar-BVMO to a unique S- or N-monooxygenase, a useful biocatalyst for the production of oxidized metabolites of human drug metabolizing enzymes.

The effect of a C298D mutation in CaHydA [FeFe]-hydrogenase: Insights into the protein-metal cluster interaction by EPR and FTIR spectroscopic investigation.

A conserved cysteine located in the signature motif of the catalytic center (H-cluster) of [FeFe]-hydrogenases functions in proton transfer. This residue corresponds to C298 in Clostridium acetobutylicum CaHydA. Despite the chemical and structural difference, the mutant C298D retains fast catalytic activity, while replacement with any other amino acid causes significant activity loss. Given the proximity of C298 to the H-cluster, the effect of the C298D mutation on the catalytic center was studied by continuous wave (CW) and pulse electron paramagnetic resonance (EPR) and by Fourier transform infrared (FTIR) spectroscopies. Comparison of the C298D mutant with the wild type CaHydA by CW and pulse EPR showed that the electronic structure of the center is not altered. FTIR spectroscopy confirmed that absorption peak values observed in the mutant are virtually identical to those observed in the wild type, indicating that the H-cluster is not generally affected by the mutation. Significant differences were observed only in the inhibited state Hox-CO: the vibrational modes assigned to the COexo and Fed-CO in this state are shifted to lower values in C298D, suggesting different interaction of these ligands with the protein moiety when C298 is changed to D298. More relevant to the catalytic cycle, the redox equilibrium between the Hox and Hred states is modified by the mutation, causing a prevalence of the oxidized state. This work highlights how the interactions between the protein environment and the H-cluster, a dynamic closely interconnected system, can be engineered and studied in the perspective of designing bio-inspired catalysts and mimics.

Isolation and characterization of a new [FeFe]-hydrogenase from Clostridium perfringens.

This paper reports the first characterization of an [FeFe]-hydrogenase from a Clostridium perfringens strain previously isolated in our laboratory from a pilot-scale bio-hydrogen plant that efficiently produces H2 from waste biomasses. On the basis of sequence analysis, the enzyme is a monomer formed by four domains hosting various iron-sulfur centres involved in electron transfer and the catalytic center H-cluster. After recombinant expression in Escherichia coli, the purified protein catalyzes H2 evolution at high rate of 1645 ± 16 s(-1) . The optimal conditions for catalysis are in the pH range 6.5-8.0 and at the temperature of 50 °C. EPR spectroscopy showed that the H-cluster of the oxidized enzyme displays a spectrum coherent with the Hox state, whereas the CO-inhibited enzyme has a spectrum coherent with the Hox -CO state. FTIR spectroscopy showed that the purified enzyme is composed of a mixture of redox states, with a prevalence of the Hox ; upon reduction with H2 , vibrational modes assigned to the Hred state were more abundant, whereas binding of exogenous CO resulted in a spectrum assigned to the Hox -CO state. The spectroscopic features observed are similar to those of the [FeFe]-hydrogenases class, but relevant differences were observed given the different protein environment hosting the H-cluster.

Graphene oxide-mediated electrochemistry of glucose oxidase on glassy carbon electrodes.

Glucose oxidase (GOD) was immobilized on glassy carbon electrodes in the presence of graphene oxide (GO) as a model system for the interaction between GO and biological molecules. Lyotropic properties of didodecyldimethylammonium bromide (DDAB) were used to stabilize the enzymatic layer on the electrode surface resulting in a markedly improved electrochemical response of the immobilized GOD. Transmission electron microscopy images of the GO with DDAB confirmed the distribution of the GO in a two-dimensional manner as a foil-like material. Although it is known that glassy carbon surfaces are not ideal for hydrogen peroxide detection, successful chronoamperometric titrations of the GOD in the presence of GO with ß-d-glucose were performed on glassy carbon electrodes, whereas no current response was detected upon ß-d-glucose addition in the absence of GO. The GOD-DDAB-GO system displayed a high turnover efficiency and substrate affinity as a glucose biosensor. The simplicity and ease of the electrode preparation procedure of this GO/DDAB system make it a good candidate for immobilizing other biomolecules for fabrication of amperometric biosensors.

Atypical effect of temperature tuning on the insertion of the catalytic iron-sulfur center in a recombinant [FeFe]-hydrogenase.

The expression of recombinant [FeFe]-hydrogenases is an important step for the production of large amount of these enzymes for their exploitation in biotechnology and for the characterization of the protein-metal cofactor interactions. The correct assembly of the organometallic catalytic site, named H-cluster, requires a dedicated set of maturases that must be coexpressed in the microbial hosts or used for in vitro assembly of the active enzymes. In this work, the effect of the post-induction temperature on the recombinant expression of CaHydA [FeFe]-hydrogenase in E. coli is investigated. The results show a peculiar behavior: the enzyme expression is maximum at lower temperatures (20°C), while the specific activity of the purified CaHydA is higher at higher temperature (30°C), as a consequence of improved protein folding and active site incorporation.

Hydrogen production at high Faradaic efficiency by a bio-electrode based on TiO2 adsorption of a new [FeFe]-hydrogenase from Clostridium perfringens.

The [FeFe]-hydrogenase CpHydA from Clostridium perfringens was immobilized by adsorption on anatase TiO2 electrodes for clean hydrogen production. The immobilized enzyme proved to perform direct electron transfer to and from the electrode surface and catalyses both H2 oxidation (H2 uptake) and H2 production (H2 evolution) with a current density for H2 evolution of about 2 mA cm(-1). The TiO2/CpHydA bioelectrode remained active for several days upon storage and when a reducing potential was set, H2 evolution occurred with a mean Faradaic efficiency of 98%. The high turnover frequency of H2 production and the tight coupling of electron transfer, resulting in a Faradaic efficiency close to 100%, support the exploitation of the novel TiO2/CpHydA stationary electrode as a powerful device for H2 production.

Electrochemistry of Canis familiaris cytochrome P450 2D15 with gold nanoparticles: An alternative to animal testing in drug discovery.

This work reports for the first time the direct electron transfer of the Canis familiaris cytochrome P450 2D15 on glassy carbon electrodes to provide an analytical tool as an alternative to P450 animal testing in the drug discovery process. Cytochrome P450 2D15, that corresponds to the human homologue P450 2D6, was recombinantly expressed in Escherichia coli and entrapped on glassy carbon electrodes (GC) either with the cationic polymer polydiallyldimethylammonium chloride (PDDA) or in the presence of gold nanoparticles (AuNPs). Reversible electrochemical signals of P450 2D15 were observed with calculated midpoint potentials (E1/2) of −191 ± 5 and −233 ± 4 mV vs. Ag/AgCl for GC/PDDA/2D15 and GC/AuNPs/2D15, respectively. These experiments were then followed by the electro-catalytic activity of the immobilized enzyme in the presence of metoprolol. The latter drug is a beta-blocker used for the treatment of hypertension and is a specific marker of the human P450 2D6 activity. Electrocatalysis data showed that only in the presence of AuNps the expected α-hydroxy-metoprolol product was present as shown by HPLC. The successful immobilization of the electroactive C. familiaris cytochrome P450 2D15 on electrode surfaces addresses the ever increasing demand of developing alternative in vitromethods for amore detailed study of animal P450 enzymes' metabolism, reducing the number of animals sacrificed in preclinical tests.

Ormosil gels doped with engineered catechol 1,2 dioxygenases for chlorocatechol bioremediation.

Enzymes entrapped in wet, nanoporous silica gel have great potential as bioreactors for bioremediation because of their improved thermal, chemical, and mechanical stability with respect to enzymes in solution. The B isozyme of catechol 1,2 dioxygenase from Acinetobacter radioresistens and its mutants of Leu69 and Ala72, designed for an increased reactivity toward the environmental pollutant chlorocatechols, were encapsulated using alkoxysilanes and alkyl alkoxysilanes as precursors in varying proportions. Encapsulation of the mutants in a hydrophobic tetramethoxysilane/dimethoxydimethylsilane-based matrix yielded a remarkable 10- to 12-fold enhancement in reactivity toward chlorocatechols. These gels also showed a fivefold increase in relative reactivity toward chlorocatechols with respect to the natural substrate catechol, thus compensating for their relatively low activity for these substrates in solution. The encapsulated enzyme, unlike the enzyme in solution, proved resilient in assays carried out in urban wastewater and bacteria-contaminated solutions mimicking environmentally relevant conditions. Overall, the combination of a structure-based rational design of enzyme mutants, and the selection of a suitable encapsulation material, proved to be a powerful approach for the production and optimization of a potential bioremediation device, with increased activity and resistance toward bacterial degradation.

An EPR, thermostability and pH-dependence study of wild-type and mutant forms of catechol 1,2-dioxygenase from Acinetobacter radioresistens S13.

Intradiol dioxygenase are iron-containing enzymes involved in the bacterial degradation of natural and xenobiotic aromatic compounds. The wild-type and mutants forms of catechol 1,2-dioxygenase Iso B from Acinetobacter radioresistens LMG S13 have been investigated in order to get an insight on the structure-function relationships within this system. 4K CW-EPR spectroscopy highlighted different oxygen binding properties of some mutants with respect to the wild-type enzyme, suggesting that a fine tuning of the substrate-binding determinants in the active site pocket may indirectly result in variations of the iron reactivity. A thermostability investigation by optical spectroscopy, that reports on the state of the metal center, showed that the structural stability is more influenced by the type rather than by the position of the mutation. Finally, the influence of pH and temperature on the catalytic activity was monitored and discussed in terms of perturbations induced on the tertiary contact network of the enzyme.

Improvement of biocatalysts for industrial and environmental purposes by saturation mutagenesis.

Laboratory evolution techniques are becoming increasingly widespread among protein engineers for the development of novel and designed biocatalysts. The palette of different approaches ranges from complete randomized strategies to rational and structure-guided mutagenesis, with a wide variety of costs, impacts, drawbacks and relevance to biotechnology. A technique that convincingly compromises the extremes of fully randomized vs. rational mutagenesis, with a high benefit/cost ratio, is saturation mutagenesis. Here we will present and discuss this approach in its many facets, also tackling the issue of randomization, statistical evaluation of library completeness and throughput efficiency of screening methods. Successful recent applications covering different classes of enzymes will be presented referring to the literature and to research lines pursued in our group. The focus is put on saturation mutagenesis as a tool for designing novel biocatalysts specifically relevant to production of fine chemicals for improving bulk enzymes for industry and engineering technical enzymes involved in treatment of waste, detoxification and production of clean energy from renewable sources.