RESUMEN
The calculation of the reflectance of photonic crystals having form-birefringent anisotropic elements in the crystal unit cell, such as cylinders, often turns out to be problematic, especially when the reflectance spectrum has to be computed according to different crystal orientations as in polycrystals for instance. The method we propose here solves this problem in the specific case of photonic crystals whose periodicities are such that there are no diffraction orders except Bragg reflection in the visible range. For a given crystal orientation, the crystal is sliced into layers and the periodic spatial variations of the dielectric function ε are homogenized. Thanks to that homogenization, the calculation can be performed using standard thin film computation codes. In order to demonstrate the usefulness of our method, we applied it to the case of a natural photonic polycrystal found on the cuticle of Entimus imperialis weevil which is a remarkable example of additive color effect. Although each photonic crystal grain of the polycrystal produces a single bright iridescent color, a non-iridescent green matt coloration is perceived by the human eye due to multiscale averaging effects.
Asunto(s)
Modelos Biológicos , Fotones , Gorgojos/anatomía & histología , Animales , Anisotropía , Color , Cristalización , Análisis EspectralRESUMEN
Scales of the Papilio nireus combine fluorophores confined in a natural photonic structure. By means of numerical simulations based on the scattering-matrix formalism, we reveal the bi-functional optical role of this peculiar architecture. Two aspects are considered: the absorption of an incident light flux and the emission of another luminous flux. First, results highlight a light trapping effect and a light absorption increase in the ultraviolet, visible and near infrared ranges. Then, results highlight an enhanced fluorescence occurring in the spatial as well as in the frequency domain. This observation could be of great interest to design new optical devices.
Asunto(s)
Mariposas Diurnas/química , Mariposas Diurnas/ultraestructura , Modelos Biológicos , Modelos Químicos , Refractometría/métodos , Alas de Animales/química , Alas de Animales/diagnóstico por imagen , Animales , Simulación por Computador , Luz , Modelos Anatómicos , Fotones , Dispersión de Radiación , UltrasonografíaRESUMEN
Three-dimensional photonic-crystal grains were found in the scales of the longhorn beetle Prosopocera lactator (Cerambycidae). The local geometric structure can be described as a face-centered-cubic array of spheres, connected by short rods, reminiscent of the "ball-and-stick" models used by solid-state chemists to visualize atomic structures. Based on scanning electron microscopy, x-ray nanotomography, optical measurements, photonic band-structure calculations, and computer simulations of the reflectance, the desaturated greenish coloration is shown to arise from the observed photonic polycrystalline structure. X-ray nanotomography is revealed as a very promising tool for photonic-crystal morphology studies.
Asunto(s)
Escarabajos/química , Escarabajos/ultraestructura , Piel/química , Piel/ultraestructura , Animales , RefractometríaRESUMEN
Peculiar enhanced backscattering of light as well as selective vapor sensing were recently observed in a layered plasmonic nanocomposite which consisted of gold nanospheres randomly distributed in a sol-gel glass thin film on top of a soda-lime glass substrate, including a buried leaky waveguide. In order to understand the underlying physical mechanisms, we performed three-dimensional transfer-matrix numerical simulations and calculated the reflectance in both backward and specular directions as functions of the incidence angle. First, assuming a layered periodic particle arrangement, we confirmed that backscattering took place at grazing incidence if the spatial period in the layers was chosen within an optimal range, in agreement with theoretical predictions. Then, using a pseudo-random particle arrangement to describe the actual nanocomposite, we revealed that strong backscattering could nevertheless persist for specific particle distributions, in spite of their randomness. This behavior was tentatively explained by putting backscattering in relation with the particle interdistance statistics. Finally, we showed that backscattered reflectance was much more sensitive than specular reflectance to the adsorption of water vapor either on the surface or inside the likely porous structure of the glass host.
Asunto(s)
Oro/química , Modelos Químicos , Nanoestructuras/química , Nanoestructuras/ultraestructura , Resonancia por Plasmón de Superficie/métodos , Simulación por Computador , Luz , Dispersión de RadiaciónRESUMEN
Chrysidid wasps in the subfamily Chrysidinae are brood parasitoids or cleptoparasites of other insects and famous for their cuticular iridescence. In this study, we examine the dorsal abdominal cuticle of the chrysidid wasp Hedychrum rutilans to identify the underlying color mechanism. Using scanning electron microscopy, reflectance spectral analysis, and theoretical calculations, we demonstrate the presence of an epicuticular multilayer reflector consisting of six lamellae with a thickness of 185 nm each. The lamellae exhibit a rough surface probably functioning as spacers between the individual layers. The reflector has a measured reflectance maximum at lambda = 630 nm, i.e., in the red part of the visible spectrum of light at normal incidence and the reflectance maximum shifts to green as the angle of incidence increases. Complementary theoretical modeling corroborates the view that the epicuticular multilayer generates the iridescent color of the chrysidid cuticle.
Asunto(s)
Avispas/fisiología , Abdomen/anatomía & histología , Abdomen/fisiología , Animales , Color , Ecosistema , Femenino , Luz , Masculino , Microscopía Electrónica de Rastreo , Pigmentación , Avispas/anatomía & histología , Avispas/ultraestructuraRESUMEN
The study of the dependence of surface mode dispersion on the termination of multilayer stacks reveals interesting features. For stratified media with high-refractive-index contrasts, surface modes can shift across several bandgaps if the thickness of the final layer is changed. The distance to the photonic band edge influences the decay length of the mode inside the multilayer stack. In the middle of the bandgap, the electromagnetic energy is concentrated in the final layer of the crystal, while near bandgap edges the decay length extends over several periods. Additional evidence suggests that surface modes behave like guided modes that can couple with the extended Bloch modes and give rise to evanescent field profiles oscillating along several periods.
RESUMEN
Light can tunnel through a high-reflectivity dielectric multilayer film when a photonic-crystal-type defect is introduced in the structure, which is useful for optical signal processing. We consider chirped structures with a defect in layer thickness for which high reflectivity is achieved over a broad wavelength range except within a narrow spectral window. The useful transmission window, while it shifts toward shorter wavelengths as the angle of incidence of the light beam is increased, does not, in general, survive; i.e., transmission disappears progressively. We show that wide angular range operation can, however, be achieved by a proper design of the chirped structure. Analytical expressions for the design parameters are derived on the basis of a semi-infinite photonic crystal model. Theoretical reflectance spectra of defect SiO2/TiO2 chirped multilayer films are presented and discussed in terms of the dispersion of the electromagnetic radiation modes of the finite photonic crystal. These devices offer a simple way to mechanically tune (through inclination of the film) the wavelength transmitted from a fixed white-light beam.
RESUMEN
Samples of the cuticle taken from the body of Buprestidae Chrysochroa vittata have been studied by scanning electron microscopy and optical reflectance measurements, related to numerical simulations. The cause of the metallic coloration of the body of these insects is determined to be the structure of the hard carapace constructed as a stack of thin chitin layers separated by very thin irregular air gaps. In particular the change of color as a function of the observation angle is elucidated in terms of an infinite photonic-crystal model, confirmed by finite multilayer calculations. These mechanisms are used to develop an artificial bioinspired multilayer system which reproduces the visual effects provided by the insect surface.
Asunto(s)
Materiales Biomiméticos/química , Escarabajos/fisiología , Fenómenos Fisiológicos de la Piel , Análisis Espectral/métodos , Animales , Materiales Biomiméticos/análisis , Escarabajos/química , Filtración , Luz , Ensayo de Materiales , Metales/química , Propiedades de SuperficieRESUMEN
With use of plane waves as a basis for the band-structure calculation of a periodic assembly of highly refringent microspheres, it can be shown that resonance-mode frequencies of isolated dielectric spheres show up in the band structures. The strongly localized bands provided by the photonic-crystal analysis is compared with exact calculations made in spherical symmetry for an isolated microsphere. This comparison sheds some light on the effectiveness of the methods based on the description of mode coupling and, in particular, on the validity of tight-binding approaches of the description of photonic band structures. In addition, examining the effect of modifying the distance separating the spheres in the lattice, makes it easy to visualize the overlap between the modes of individual spheres. Thus quantitative information is provided on the geometry needed to feed energy into low-angular-momentum morphology-dependent resonances from a sharp source of the evanescent field and on the lifetime of these modes, when the resonances are disturbed by the proximity of a dielectric object of similar radius.