RESUMEN
Over 80% of wastewater worldwide is released into the environment without proper treatment. Whilst environmental pollution continues to intensify due to the increase in the number of polluting industries, conventional techniques employed to clean the environment are poorly effective and are expensive. MXenes are a new class of 2D materials that have received a lot of attention for an extensive range of applications due to their tuneable interlayer spacing and tailorable surface chemistry. Several MXene-based nanomaterials with remarkable properties have been proposed, synthesized, and used in environmental remediation applications. In this work, a comprehensive review of the state-of-the-art research progress on the promising potential of surface functionalized MXenes as photocatalysts, adsorbents, and membranes for wastewater treatment is presented. The sources, composition, and effects of wastewater on human health and the environment are displayed. Furthermore, the synthesis, surface functionalization, and characterization techniques of merit used in the study of MXenes are discussed, detailing the effects of a range of factors (e.g., PH, temperature, precursor, etc.) on the synthesis, surface functionalization, and performance of the resulting MXenes. Finally, the limits of MXenes and MXene-based materials as well as their potential future research directions, especially for wastewater treatment applications are highlighted.
RESUMEN
We report the findings of a study into the suitability of copper (I) thiocyanate (CuSCN) as a hole-transport layer in inverted photovoltaic (PV) devices based on the black gamma phase (B-γ) of CsSnI3 perovskite. Remarkably, when B-γ-CsSnI3 perovskite is deposited from a dimethylformamide solution onto a 180-190 nm thick CuSCN film supported on an indium-tin oxide (ITO) electrode, the CuSCN layer is completely displaced leaving a perovskite layer with high uniformity and coverage of the underlying ITO electrode. This finding is confirmed by detailed analysis of the thickness and composition of the film that remains after perovskite deposition, together with photovoltaic device studies. The results of this study show that, whilst CuSCN has proved to be an excellent hole-extraction layer for high performance lead-perovskite and organic photovoltaics, it is unsuitable as a hole-transport layer in inverted B-γ-CsSnI3 perovskite photovoltaics processed from solution.
RESUMEN
The sliding of non-Newtonian drops down planar surfaces results in a complex, entangled balance between interfacial forces and non-linear viscous dissipation, which has been scarcely inspected. In particular, a detailed understanding of the role played by the polymer flexibility and the resulting elasticity of the polymer solution is still lacking. To this aim, we have considered polyacrylamide (PAA) solutions of different molecular weights, suspended either in water or in glycerol/water mixtures. In contrast to drops of stiff polymers, drops of flexible polymers exhibit a remarkable elongation in steady sliding. This difference is most likely attributed to variation of viscous bending as a consequence of variation of shear thinning. Moreover, an "optimal elasticity" of the polymer seems to be required for this drop elongation to be visible. We have complemented experimental results with numerical simulations of a viscoelastic FENE-P drop. This has been a decisive step to unraveling how a change of the elastic parameters (e.g. polymer relaxation time, maximum extensibility) affects the dimensionless sliding velocity.
RESUMEN
The motion of partially wetting liquid drops in contact with a solid surface is strongly affected by contact angle hysteresis and interfacial pinning. However, the majority of models proposed for drops sliding over chemical surface patterns consistently neglect the difference between advancing and receding contact angles. In this article, we present a joint experimental and numerical study of the interaction of gravity-driven drops with a chemical step formed at the junction between a hydrophilic and a hydrophobic region. It demonstrates the strong impact of a contact angle hysteresis contrast on the motion of drops at a linear chemical step. Surprisingly, the smallest driving force required to drag the drop across the step onto the lower hydrophobic surface is not observed at a right angle of incidence. Our model reveals that the non-monotonous response of this passive drop 'filter' is solely due to the higher advancing contact angle on the lower surface, and creates an instance where drop motion is affected by dissipation at the contact line rather than by surface energy.
RESUMEN
We have investigated the sliding of droplets made of solutions of Xanthan, a stiff rodlike polysaccharide exhibiting a non-Newtonian behavior, notably characterized by a shear thinning viscosity accompanied by the emergence of normal stress difference as the polymer concentration is increased. These experimental results are quantitatively compared with those of Newtonian fluids (water). The impact of the non-Newtonian behavior on the sliding process was shown through the relation between the average dimensionless velocity (i.e. the capillary number) and the dimensionless volume forces (i.e. the Bond number). To this aim, it is needed to define operative strategies to compute the capillary number for the shear thinning fluids and compare with the corresponding Newtonian case. The resulting capillary number for the Xanthan solutions scales linearly with the Bond number at small inclinations, as well known for Newtonian fluids, while it shows a plateau as the Bond number is increased. Experimental data were complemented with lattice Boltzmann numerical simulations of sliding droplets, aimed to disentangle the specific contribution of shear thinning and elastic effects on the sliding behavior. In particular the deviation from the linear (Newtonian) trend is more likely attributed to the emergence of normal stresses inside the non-Newtonian droplet.
