Transient quantum beatings of trions in hybrid organic tri-iodine perovskite single crystal.

Utilizing the spin degree of freedom of photoexcitations in hybrid organic inorganic perovskites for quantum information science applications has been recently proposed and explored. However, it is still unclear whether the stable photoexcitations in these compounds correspond to excitons, free/trapped electron-hole pairs, or charged exciton complexes such as trions. Here we investigate quantum beating oscillations in the picosecond time-resolved circularly polarized photoinduced reflection of single crystal methyl-ammonium tri-iodine perovskite (MAPbI3) measured at cryogenic temperatures. We observe two quantum beating oscillations (fast and slow) whose frequencies increase linearly with B with slopes that depend on the crystal orientation with respect to the applied magnetic field. We assign the quantum beatings to positive and negative trions whose Landé g-factors are determined by those of the electron and hole, respectively, or by the carriers left behind after trion recombination. These are [Formula: see text] = 2.52 and [Formula: see text]= 2.63 for electrons, whereas [Formula: see text]= 0.28 and [Formula: see text]= 0.57 for holes. The obtained g-values are in excellent agreement with an 8-band K.P calculation for orthorhombic MAPbI3. Using the technique of resonant spin amplification of the quantum beatings we measure a relatively long spin coherence time of ~ 11 (6) nanoseconds for electrons (holes) at 4 K.

Printing Air-Stable High-Tc Molecular Magnet with Tunable Magnetic Interaction.

High-Tc molecular magnets have amassed much promise; however, the long-standing obstacle for its practical applications is the inaccessibility of high-temperature molecular magnets showing dynamic and nonvolatile magnetization control. In addition, its functional durability is prone to degradation in oxygen and heat. Here, we introduce a rapid prototyping and stabilizing strategy for high Tc (360 K) molecular magnets with precise spatial control in geometry. The printed molecular magnets are thermally stable up to 400 K and air-stable for over 300 days, a significant improvement in its lifetime and durability. X-ray magnetic circular dichroism and computational modeling reveal the water ligands controlling magnetic exchange interaction of molecular magnets. The molecular magnets also show dynamical and reversible tunability of magnetic exchange interactions, enabling a colossal working temperature window of 86 K (from 258 to 344 K). This study provides a pathway to flexible, lightweight, and durable molecular magnetic devices through additive manufacturing.

Rashba splitting in organic-inorganic lead-halide perovskites revealed through two-photon absorption spectroscopy.

The Rashba splitting in hybrid organic-inorganic lead-halide perovskites (HOIP) is particularly promising and yet controversial, due to questions surrounding the presence or absence of inversion symmetry. Here we utilize two-photon absorption spectroscopy to study inversion symmetry breaking in different phases of these materials. This is an all-optical technique to observe and quantify the Rashba effect as it probes the bulk of the materials. In particular, we measure two-photon excitation spectra of the photoluminescence in 2D, 3D, and anionic mixed HOIP crystals, and show that an additional band above, but close to the optical gap is the signature of new two-photon transition channels that originate from the Rashba splitting. The inversion symmetry breaking is believed to arise from ionic impurities that induce local electric fields. The observation of the Rashba splitting in the bulk of HOIP has significant implications for the understanding of their spintronic and optoelectronic device properties.

Proton switching molecular magnetoelectricity.

The convergence of proton conduction and multiferroics is generating a compelling opportunity to achieve strong magnetoelectric coupling and magneto-ionics, offering a versatile platform to realize molecular magnetoelectrics. Here we describe machine learning coupled with additive manufacturing to accelerate the design strategy for hydrogen-bonded multiferroic macromolecules accompanied by strong proton dependence of magnetic properties. The proton switching magnetoelectricity occurs in three-dimensional molecular heterogeneous solids. It consists of a molecular magnet network as proton reservoir to modulate ferroelectric polarization, while molecular ferroelectrics charging proton transfer to reversibly manipulate magnetism. The magnetoelectric coupling induces a reversible 29% magnetization control at ferroelectric phase transition with a broad thermal hysteresis width of 160 K (192 K to 352 K), while a room-temperature reversible magnetic modulation is realized at a low electric field stimulus of 1 kV cm-1. The findings of electrostatic proton transfer provide a pathway of proton mediated magnetization control in hierarchical molecular multiferroics.

Photocurrent in Metal-Halide Perovskite/Organic Semiconductor Heterostructures: Impact of Microstructure on Charge Generation Efficiency.

Hybrid organic-inorganic metal-halide perovskites have emerged as versatile materials for enabling low-cost, mechanically flexible optoelectronic applications. The progress has been commendable; however, technological breakthroughs have outgrown the basic understanding of processes occurring in bulk and at device interfaces. Here, we investigated the photocurrent at perovskite/organic semiconductor interfaces in relation to the microstructure of electronically active layers. We found that the photocurrent response is significantly enhanced in the bilayer structure as a result of a more efficient dissociation of the photogenerated excitons and trions in the perovskite layer. The increase in the grain size within the organic semiconductor layer results in reduced trapping and further enhances the photocurrent by extending the photocarriers' lifetime. The photodetector responsivity and detectivity have improved by 1 order of magnitude in the optimized samples, reaching values of 6.1 ± 1.1 A W-1, and 1.5 × 1011 ± 4.7 × 1010 Jones, respectively, and the current-voltage hysteresis has been eliminated. Our results highlight the importance of fine-tuning film microstructure in reducing the loss processes in thin-film optoelectronics based on metal-halide semiconductors and provide a powerful interfacial design method to consistently achieve high-performance photodetectors.

Spin-Dependent Photovoltaic and Photogalvanic Responses of Optoelectronic Devices Based on Chiral Two-Dimensional Hybrid Organic-Inorganic Perovskites.

Two-dimensional hybrid organic-inorganic perovskites (2D-HOIPs) that form natural multiple quantum wells have attracted increased research interest due to their interesting physics and potential applications in optoelectronic devices. Recent studies have shown that spintronics applications can also be introduced to 2D-HOIPs upon integrating chiral organic ligands into the organic layers. Here we report spin-dependent photovoltaic and photogalvanic responses of optoelectronic devices based on chiral 2D-HOIPs, namely, (R-MBA)2PbI4 and (S-MBA)2PbI4. The out-of-plane photocurrent response in vertical photovoltaic devices exhibits ∼10% difference upon right and left circularly polarized light (CPL) excitation, which originates from selective spin transport through the chiral multilayers. In contrast, the in-plane photocurrent response generated by CPL excitation of planar photoconductive devices shows a typical response of chirality-induced circular photogalvanic effect that originates from the Rashba splitting in the electronic bands of these compounds. Our studies may lead to potential applications of chiral 2D-HOIPs in optoelectronic devices that are sensitive to the light helicity.

Isotope Effect in the Magneto-Optoelectronic Response of Organic Light-Emitting Diodes Based on Donor-Acceptor Exciplexes.

The isotope effect is studied in the magneto-electroluminescence (MEL) and pulsed electrically detected magnetic resonance of organic light-emitting diodes based on thermally activated delayed fluorescence (TADF) from donor-acceptor exciplexes that are either protonated (H) or deuterated (D). It is found that at ambient temperature, the exchange of H to D has no effect on the spin-dependent current and MEL responses in the devices. However, at cryogenic temperatures, where the reverse intersystem crossing (RISC) from triplet to singlet exciplex diminishes, a pronounced isotope effect is observed. These results show that the RISC process is not governed by the hyperfine interaction as thought previously, but proceeds through spin-mixing in the triplet exciplex. The observations are corroborated by electrically detected transient spin nutation experiments that show relatively long dephasing time at ambient temperature, and interpreted in the context of a model that involves exchange and hyperfine interactions in the spin triplet exciplex. These findings deepen the understanding of the RISC process in TADF materials.

Spin Wave Excitation, Detection, and Utilization in the Organic-Based Magnet, V(TCNE)x (TCNE = Tetracyanoethylene).

Spin waves, quantized as magnons, have low energy loss and magnetic damping, which are critical for devices based on spin-wave propagation needed for information processing devices. The organic-based magnet [V(TCNE)x ; TCNE = tetracyanoethylene; x ≈ 2] has shown an extremely low magnetic damping comparable to, for example, yttrium iron garnet (YIG). The excitation, detection, and utilization of coherent and non-coherent spin waves on various modes in V(TCNE)x is demonstrated and show that the angular momentum carried by microwave-excited coherent spin waves in a V(TCNE)x film can be transferred into an adjacent Pt layer via spin pumping and detected using the inverse spin Hall effect. The spin pumping efficiency can be tuned by choosing different excited spin wave modes in the V(TCNE)x film. In addition, it is shown that non-coherent spin waves in a V(TCNE)x film, excited thermally via the spin Seebeck effect, can also be used as spin pumping source that generates an electrical signal in Pt with a sign change in accordance with the magnetization switching of the V(TCNE)x . Combining coherent and non-coherent spin wave detection, the spin pumping efficiency can be thermally controlled, and new insight is gained for the spintronic applications of spin wave modes in organic-based magnets.

Separation of Spin and Charge Transport in Pristine π-Conjugated Polymers.

We have experimentally tested whether spin-transport and charge-transport in pristine π-conjugated polymer films at room temperature occur via the same electronic processes. We have obtained the spin diffusion coefficient of several π-conjugated polymer films from the spin diffusion length measured by the technique of inverse spin Hall effect and the spin relaxation time measured by pulsed electrically detected magnetic resonance spectroscopy. The charge diffusion coefficient was obtained from the time-of-flight mobility measurements on the same films. We found that the spin diffusion coefficient is larger than the charge diffusion coefficient by about 1-2 orders of magnitude and conclude that spin and charge transports in disordered polymer films occur through different electronic processes.

Magneto-electroluminescence response in 2D and 3D hybrid organic-inorganic perovskite light emitting diodes.

We have studied the magneto-electroluminescence (MEL) response in light emitting diodes based on 2D-(PEA)2PbI4 and 3D-MAPbI3 hybrid organic-inorganic perovskites at cryogenic temperatures. We found that the MEL is negative, i.e., the EL decreases with the applied field strength, B. In addition, the MEL(B) response has a Lorentzian line shape whose width depends on the perovskite used. We interpret the MEL(B) response using the "Δg mechanism" in which the spin of the injected electron-hole (e-h) pairs oscillates between singlet and triplet configurations due to different precession frequencies of the electron and hole constituents that originate from the difference, Δg, in the electron and hole gyromagnetic constants, g. In this model, the MEL(B) linewidth is inversely proportional to the spin lifetime and Δg. The model used is validated by directly measuring the spin lifetime of photogenerated e-h pairs using the circularly polarized pump-probe transmission technique with 100 fs resolution.

Observation of exceptional points in magnonic parity-time symmetry devices.

Non-Hermitian Hamiltonians may still have real eigenvalues, provided that a combined parity-time (ƤƮ) symmetry exists. The prospect of ƤƮ symmetry has been explored in several physical systems such as photonics, acoustics, and electronics. The eigenvalues in these systems undergo a transition from real to complex at exceptional points (EPs), where the ƤƮ symmetry is broken. Here, we demonstrate the existence of EP in magnonic devices composed of two coupled magnets with different magnon losses. The eigenfrequencies and damping rates change from crossing to anti-crossing at the EP when the coupling strength increases. The magnonic dispersion includes a strong "acoustic-like" mode and a weak "optic-like" mode. Moreover, upon microwave radiation, the ƤƮ magnonic devices act as magnon resonant cavity with unique response compared to conventional magnonic systems.

Surface-enhanced spin current to charge current conversion efficiency in CH3NH3PbBr3-based devices.

Hybrid organic-inorganic perovskites have shown great promise for spintronic applications due to their large spin-orbit coupling induced by the Pb and halogen atoms. Particularly, the large observed surface-induced Rashba splitting in CH3NH3PbBr3 indicates efficient spin-current-to-charge-current (StC) conversion, which, however, has not been demonstrated yet. In this work, the StC conversion efficiency in ferromagnet/CH3NH3PbBr3-based devices is studied using the pulsed spin-pumping technique measured by the inverse spin Hall effect. We found that the StC conversion efficiency is anomalous in that it increases at small perovskite layer thickness. This indicates the existence of a surface-dominated StC mechanism such as the inverse Rashba-Edelstein effect. By inserting a thin LiF layer between the ferromagnet and the perovskite film, the StC conversion efficiency is greatly suppressed, validating the existence of a Rashba surface in the CH3NH3PbBr3 film.

Control of Whispering Gallery Modes and PT-Symmetry Breaking in Colloidal Quantum Dot Microdisk Lasers with Engineered Notches.

Whispering gallery mode resonators have been demonstrated to be a great way to achieve superior optical cavities with high quality factor and small mode volume. However, due to the high sensitivity of these modes to the properties of the resonator boundary, they are susceptible to parasitic splitting of clockwise and counterclockwise modes. In this work, we investigate the effect of implantation of an engineered notch into the boundary of a circular microdisk resonator fabricated from colloidal quantum dots, which are particularly sensitive to boundary defects. We observed a strong reduction of parasitic mode splitting with introduction of a large engineered notch, as well as enhanced directionality of laser emission. We further investigate the performance of these resonators in evanescently coupled pairs, where the modal interaction allows modulation of laser behavior through variation of the gain and loss induced by the optical pump. We show that two distinct cases of modal interaction can be achieved by adjusting the size of the engineered notch, providing a bridge between intra- and interdisk modal interactions for laser spectral control.

Magneto-Electroluminescence Study of Fringe Field in "Magnetic" Organic Light-Emitting Diodes.

Magneto-electroluminescence (MEL) represents the electroluminescence intensity change upon application of an external magnetic field. We show that the MEL field response in "magnetic" organic light-emitting diodes, where one electrode is ferromagnetic (FM), is a powerful technique for measuring the induced fringe field, B⃗F, from the FM electrode in the organic layer. We found that the in-plane fringe field, B⃗F∥, from 3 nm Co and Ni80Fe20 FM electrodes is proportional to the applied field, B⃗∥. The fringe field of the 3 nm Ni80Fe20 film was also investigated for an applied out-of-plane magnetic field, B⃗⊥. We found that the out-of-plane fringe field has two components: a component that is parallel or antiparallel to B⃗⊥ and remains unchanged with the distance, d, from the FM electrode and the other component that is highly inhomogeneous, parallel to the surface, and steeply decreases with d. We show that the obtained B⃗F is independent of the underlying mechanism for the MEL(B) response and thus may be considered universal.

Robust lasing modes in coupled colloidal quantum dot microdisk pairs using a non-Hermitian exceptional point.

Evanescently coupled pairs of microdisk lasers have emerged as a useful platform for studying the non-Hermitian physics of exceptional points. It remains an open question how scalable and versatile such phenomena can be when carried over to other designs. Here we have studied the effect of gain/loss modulation in an evanescently coupled pair of microdisk optical resonators fabricated from solution-processed colloidal quantum dots. The emission spectra of these structures are sensitive to small imperfections, which cause frequency-splitting of the whispering gallery modes. Despite this inherent disorder, we found that when spatially modulating the optical pump to vary the gain differential between the coupled microdisks, the coupling drives the split parasitic intra-cavity modes into coalescence at an exceptional point of the resulting three-mode system. This unusual behavior is rationalized via a Hamiltonian that incorporates the intra-cavity coupling as well as the anisotropic inter-cavity coupling between modes in the microdisk pair.

Spin-optoelectronic devices based on hybrid organic-inorganic trihalide perovskites.

Recently the hybrid organic-inorganic trihalide perovskites have shown remarkable performance as active layers in photovoltaic and other optoelectronic devices. However, their spin characteristic properties have not been fully studied, although due to the relatively large spin-orbit coupling these materials may show great promise for spintronic applications. Here we demonstrate spin-polarized carrier injection into methylammonium lead bromide films from metallic ferromagnetic electrodes in two spintronic-based devices: a 'spin light emitting diode' that results in circularly polarized electroluminescence emission; and a 'vertical spin valve' that shows giant magnetoresistance. In addition, we also apply a magnetic field perpendicular to the injected spins orientation for measuring the 'Hanle effect', from which we obtain a relatively long spin lifetime for the electrically injected carriers. Our measurements initiate the field of hybrid perovskites spin-related optoelectronic applications.

Sign reversal of magnetoresistance and inverse spin Hall effect in doped conducting polymers.

Conducting polymers, where pristine polymers are doped by active dopants, have been used in a variety of flexible optoelectronic device applications due to their tunable conductivity values. Charge transport in these materials has been intensively studied for over three decades. However, spin transport properties in these compounds have remained elusive. Here, we studied two polaron-dominated and trap-dominated spin transport processes in two types of PEDOT:PSS polymers that are lightly and heavily doped, respectively. Using pulsed spin-pumping and spin-injection techniques, we found the sign of inverse spin Hall effect and magnetoresistance obtained from the lightly doped PEDOT:PSS film can reverse its polarity as a function of temperature and applied bias, in contrast to that in the heavily doped PEDOT:PSS film. Our work provides an alternative approach for studying the spin transport in conducting polymer films.

Multiphoton Microscopy of π-Conjugated Copolymers and Copolymer/Fullerene Blends for Organic Photovoltaic Applications.

Organic photovoltaic (OPV) cells based on π-conjugated copolymer/fullerene blends are devices with the highest power conversion efficiencies within the class of organic semiconductors. Although a number of image microscopies have been applied to films of π-conjugated copolymers and their fullerene blends, seldom have they been able to detect microscopic defects in the blend films. We have applied multiphoton microscopy (MPM) using a 65 fs laser at 1.56 µm for spectroscopy and mapping of films of various π-conjugated copolymers and their fullerene blends. All pristine copolymer films have shown third harmonic generation (THG) and two-photon or three-photon photoluminescence that could be used for mapping the films with micrometer spatial resolution. Since the fullerenes have much weaker THG efficiency than those of the copolymers, we could readily map the copolymer/fullerene blend films that showed interpenetrating micron-sized grains of the two constituents. In addition, we also found second harmonic generation from various micron-sized defects in the films that are formed during film deposition or light illumination at ambient conditions, which do not possess inversion symmetry. The MPM method is therefore beneficial for organic films and devices for investigating the properties and growth of copolymer/fullerene blends for OPV applications.

Organic-based magnon spintronics.

Magnonics concepts utilize spin-wave quanta (magnons) for information transmission, processing and storage. To convert information carried by magnons into an electric signal promises compatibility of magnonic devices with conventional electronic devices, that is, magnon spintronics 1 . Magnons in inorganic materials have been studied widely with respect to their generation2,3, transport4,5 and detection 6 . In contrast, resonant spin waves in the room-temperature organic-based ferrimagnet vanadium tetracyanoethylene (V(TCNE) x (x ≈ 2)), were detected only recently 7 . Herein we report room-temperature coherent magnon generation, transport and detection in films and devices based on V(TCNE) x using three different techniques, which include broadband ferromagnetic resonance (FMR), Brillouin light scattering (BLS) and spin pumping into a Pt adjacent layer. V(TCNE) x can be grown as neat films on a large variety of substrates, and it exhibits extremely low Gilbert damping comparable to that in yttrium iron garnet. Our studies establish an alternative use for organic-based magnets, which, because of their synthetic versatility, may substantially enrich the field of magnon spintronics.

Colour selective control of terahertz radiation using two-dimensional hybrid organic inorganic lead-trihalide perovskites.

Controlling and modulating terahertz signals is of fundamental importance to allow systems level applications. We demonstrate an innovative approach for controlling the propagation properties of terahertz (THz) radiation, through use of both the excitation optical wavelength (colour) and intensity. We accomplish this using two-dimensional (2D) layered hybrid trihalide perovskites that are deposited onto silicon substrates. The absorption properties of these materials in the visible range can be tuned by changing the number of inorganic atomic layers in between the organic cation layers. Optical absorption in 2D perovskites occurs over a broad spectral range above the bandgap, resulting in free carrier generation, as well as over a narrow spectral range near the bandedge due to exciton formation. We find that only the latter contribution gives rise to photo-induced THz absorption. By patterning multiple 2D perovskites with different optical absorption properties onto a single device, we demonstrate both colour selective modulation and focusing of THz radiation. These findings open new directions for creating active THz devices.