Engineering active lysostaphin variants that incorporate noncanonical amino acids and characterizing the effects of site-specific PEGylation.

We describe a facile strategy to identify sites for the incorporation of noncanonical amino acids into lysostaphin-an enzyme that degrades the cell wall of Staphylococcus aureus-while retaining stapholytic activity. We used this strategy to generate active variants of lysostaphin incorporating para-azidophenylalanine. The incorporation of this "reactive handle" enabled the orthogonal site-specific modification of the enzyme variants with polyethylene glycol (PEG) using copper-free click cycloaddition. PEGylated lysostaphin variants could retain their stapholytic activity, with the extent of retention depending on the site of modification and the PEG molecular weight. The site-specific modification of lysostaphin could be useful not only for PEGylation to improve biocompatibility but also for the incorporation of the enzyme into hydrogels and other biomaterials and for studies of protein structure and dynamics. Moreover, the approach described herein could be readily applied to identify suitable sites for the incorporation of reactive handles into other proteins of interest.

Nanovaccines Displaying the Influenza Virus Hemagglutinin in an Inverted Orientation Elicit an Enhanced Stalk-Directed Antibody Response.

Despite the availability of licensed vaccines, influenza causes considerable morbidity and mortality worldwide. Current influenza vaccines elicit an immune response that primarily targets the head domain of the viral glycoprotein hemagglutinin (HA). Influenza viruses, however, readily evade this response by acquiring mutations in the head domain. While vaccines that target the more conserved HA stalk may circumvent this problem, low levels of antistalk antibodies are elicited by vaccination, possibly due to the poor accessibility of the stalk domain to B cell receptors. In this work, it is demonstrated that nanoparticles presenting HA in an inverted orientation generate tenfold higher antistalk antibody titers after a prime immunization and fivefold higher antistalk titers after a boost than nanoparticles displaying HA in its regular orientation. Moreover, nanoparticles presenting HA in an inverted orientation elicit a broader antistalk response that reduces mouse weight loss and improves survival after challenge to a greater extent than nanoparticles displaying HA in a regular orientation. Refocusing the antibody response toward conserved epitopes by controlling antigen orientation may enable the design of broadly protective nanovaccines targeting influenza viruses and other pathogens with pandemic potential.

Pilot-scale demonstration of an end-to-end integrated and continuous biomanufacturing process.

There has been increasing momentum recently in the biopharmaceutical industry to transition from traditional batch processes to next-generation integrated and continuous biomanufacturing. This transition from batch to continuous is expected to offer several advantages which, taken together, could significantly improve access to biologics drugs for patients. Despite this recent momentum, there has not been a commercial implementation of a continuous bioprocess reported in the literature. In this study, we describe a successful pilot-scale proof-of-concept demonstration of an end-to-end integrated and continuous bioprocess for the production of a monoclonal antibody (mAb). This process incorporated all of the key unit operations found in a typical mAb production process, including the final steps of virus removal filtration, ultrafiltration, diafiltration, and formulation. The end-to-end integrated process was operated for a total of 25 days and produced a total of 4.9 kg (200 g/day or 2 g/L BRX/day) of the drug substance from a 100-L perfusion bioreactor (BRX) with acceptable product quality and minimal operator intervention. This successful proof-of-concept demonstrates that end-to-end integrated continuous bioprocessing is achievable with current technologies and represents an important step toward the realization of a commercial integrated and continuous bioprocessing process.

The Design of Vaccines Based on the Shielding of Antigenic Site Ø of a Respiratory Syncytial Virus Fusion Protein Immunogen.

Respiratory syncytial virus (RSV), for which there is currently no licensed vaccine, displays a fusion (F) protein that is considered a vaccine target. This protein has an antigenic site called site Ø, which has been shown to elicit potent, neutralizing antibodies and has therefore been considered important in the formulation of RSV vaccines. However, this site is also the least conserved region on the F protein across RSV subtypes. Therefore, directing the immune response away from site Ø and refocusing it toward more conserved parts of the RSV F protein might serve to better elicit broadly neutralizing antibodies. To demonstrate that directing the immune response away from site Ø is a viable approach, a prefusion F-based vaccine based on an F protein with a shielded site Ø is generated. Sera from mice immunized with multivalent scaffolds presenting this immunogen is capable of neutralizing RSV of both subtypes. This result may have application in the development of an effective and broadly protective RSV vaccine.

Gamma irradiating chromatography columns enables bioburden-free integrated continuous biomanufacturing.

An important consideration for integrated continuous biomanufacturing is that the downstream chromatography steps integrated with the bioreactor should maintain a low bioburden state throughout the entire duration of the operation. One potential strategy to achieve this is to start bioburden-free and functionally close the chromatography system. While chromatography skids themselves can be rendered bioburden-free, limitations exist in applying these methods to chromatography columns. The small column sizes used in continuous multicolumn chromatography enable gamma irradiation of disposable columns to render them bioburden-free. However, this approach has not been widely implemented, likely because gamma irradiation can negatively impact resin performance. Here, several protective mobile-phase modifiers were screened and shown to help chromatography resins retain naïve-like performance. Gamma irradiated columns were then integrated into perfusion bioreactors for continuous capture. Successful integrated continuous capture downstream of perfusion bioreactors for greater than 40 days using protein A, custom affinity, and non-affinity capture resins for multiple biologic modalities is demonstrated in development and commercial settings. No indications of time-based performance decline or bioburden growth have been observed. This strategy enables bioburden-free integrated continuous biomanufacturing operations and could allow full process closure and decreased environmental control requirements for facilities; thus, permitting simultaneous multi-product operations in a ballroom arrangement.

One-pot synthesis of heterodimeric agonists that activate the canonical Wnt signaling pathway.

Fragment antigen-binding domains (Fabs) from anti-Frizzled and anti-LRP6 monoclonal antibodies were conjugated using SpyTag-SpyCatcher chemistry via a one-pot reaction. The resulting synthetic heterodimeric agonist outperformed the natural ligand, Wnt-3a, in activating canonical Wnt signaling in mammalian cells. This approach should be broadly applicable to activate receptor-mediated cellular signaling.

Nanopatterning protein antigens to refocus the immune response.

Vaccines for many important diseases remain elusive, and those for others need to be updated frequently. Vaccine efficacy has been hindered by existing sequence diversity in proteins and by newly-acquired mutations that enable escape from vaccine-induced immune responses. To address these limitations, we developed an approach for nanopatterning protein antigens that combines the site-specific incorporation of non-canonical amino acids with chemical modification to focus the immune response on conserved protein regions. We demonstrated the approach using green fluorescent protein (GFP) as a model antigen and with a promising malaria vaccine candidate, Merozoite surface protein 119 (MSP119). Immunization of mice with nanopatterned MSP119 elicited antibodies that recognized MSP119 from heterologous strains, differing in sequence at as many as 21 of 96 residues. Nanopatterning should enable the elicitation of broadly protective antibodies against a wide range of pathogens and toxins.

Recent advances in engineering polyvalent biological interactions.

Polyvalent interactions, where multiple ligands and receptors interact simultaneously, are ubiquitous in nature. Synthetic polyvalent molecules, therefore, have the ability to affect biological processes ranging from protein-ligand binding to cellular signaling. In this review, we discuss recent advances in polyvalent scaffold design and applications. First, we will describe recent developments in the engineering of polyvalent scaffolds based on biomolecules and novel materials. Then, we will illustrate how polyvalent molecules are finding applications as toxin and pathogen inhibitors, targeting molecules, immune response modulators, and cellular effectors.

Enhanced protein stability through minimally invasive, direct, covalent, and site-specific immobilization.

Bioconjugating protein to nonbiological surfaces is an essential component of many promising biotechnologies impacting diverse applications such as medical diagnostics, biocatalysis, biohazard detection, and proteomics. However, to enable the widespread economical use of immobilized-protein technologies, long-term stability, and reusability is essential. To enhance protein stability in harsh conditions, herein we report a minimally invasive and covalent bioconjugation that enables precise control of the immobilization location at potentially any surface-accessible location where the incorporated unnatural amino acid does not impact protein structure and function. Specifically, the PRECISE system is introduced where a uniquely reactive unnatural amino acid was incorporated site-specifically at a prespecified location in GFP using cell-free protein synthesis. The GFP was then directly and covalently attached to superparamagnetic beads by the unnatural amino acid in a single click reaction. The immobilized GFP was probed for retained activity and stability under harsh conditions including freeze-thaw cycling and incubation in urea at elevated temperatures. The immobilized GFP was more stable compared to unattached protein in all cases and for all durations observed. The enhanced stability of the immobilized protein is a promising step towards long-term protein stability for biocatalysis and other immobilized-protein applications.

The incorporation of the A2 protein to produce novel Qß virus-like particles using cell-free protein synthesis.

Virus-like particles (VLPs) have been employed for a number of nanometric applications because they self-assemble, exhibit a high degree of symmetry, and can be genetically and chemically modified. However, high symmetry does not allow for a single unique modification site on the VLP. Here, we demonstrate the co-expression of the cytotoxic A2 protein and the coat protein of the bacteriophage Qß to form a nearly monodispersed population of novel VLPs. Cell-free protein synthesis allows for direct access and optimization of protein-synthesis and VLP-assembly. The A2 is shown to be incorporated at high efficiency, approaching a theoretical maximum of one A2 per VLP. This work demonstrates de novo production of a novel VLP, which contains a unique site that has the potential for future nanometric engineering applications.