The acute inflammatory response to copper(II)-doped biphasic calcium phosphates.

Infection and inflammation are two key features to consider to avoid septic or aseptic loosening of bone-implanted biomaterials. In this context, various approaches to fine-tune the biomaterial's properties have been studied in order to modulate the crosstalk between immune and skeletal cells. Cation-doping strategies for tuning of calcium phosphates properties has been evidenced as a promising way to control the biomaterial-induced inflammatory process, and thus improving their osteoimmunomodulatory properties. Copper(II) ions are recognized for their antibacterial potential, but the literature on their impact on particulate material-induced acute inflammation is scarce. We synthesized copper(II) ions-doped biphasic calcium phosphate (BCP), intended to exhibit osteoimmunomodulatory properties. We addressed in vitro, for the first time, the inflammatory response of human primary polymorphonuclear neutrophils (PMNs) to copper(II) ions-doped or undoped (BCP) powders, synthesized by an original and robust wet method, in the presence or absence of LPS as a costimulant to mimic an infectious environment. ELISA and zymography allowed us to evidence, in vitro, a specific increase in IL-8 and GRO-α secretion but not MIP-1ß, TNF-α, or MMP-9, by PMNs. To assess in vivo relevance of these findings, we used a mouse air pouch model. Thanks to flow cytometry analysis, we highlighted an increased PMN recruitment with the copper(II) ions-doped samples compared to undoped samples. The immunomodulatory effect of copper(II) ions-doped BCP powders and the consequent induced moderate level of inflammation may promote bacterial clearance by PMNs in addition to the antimicrobial potential of the material. Copper(II) doping provides new insights into calcium phosphate (CaP)-based biomaterials for prosthesis coating or bone reconstruction by effectively modulating the inflammatory environment.

Cutibacterium acnes: the Urgent Need To Identify Diagnosis Markers.

Cutibacterium acnes role is well described during acne but remains a mystery regarding its implication in bone and prosthesis or cerebrospinal fluid shunt infections. The main issue is that these low-grade symptom infections are difficult to diagnose and lead to irreversible and grave sequelae for patients. Consequently, there is an urgent need to find new biomarkers to accelerate the diagnosis of disease, an issue addressed by Beaver et al. thanks to a promising proteomic approach.

Biocompatibility of sol-gel hydroxyapatite-titania composite and bilayer coatings.

Titania-Hydroxyapatite (TiO2/HAP) reinforced coatings are proposed to enhance the bioactivity and corrosion resistance of 316L stainless steel (316L SS). Herein, spin- and dip-coating sol-gel processes were investigated to construct two kinds of coatings: TiO2/HAP composite and TiO2/HAP bilayer. Physicochemical characterization highlighted the bioactivity response of the TiO2/HAP composite once incubated in physiological conditions for 7days whereas the TiO2/HAP bilayer showed instability and dissolution. Biological analysis revealed a failure in human stem cells adhesion on TiO2/HAP bilayer whereas on TiO2/HAP composite the presence of polygonal shaped cells, possessing good behaviour attested a good biocompatibility of the composite coating. Finally, TiO2/HAP composite with hardness up to 0.6GPa and elastic modulus up to 18GPa, showed an increased corrosion resistance of 316L SS. In conclusion, the user-friendly sol-gel processes led to bioactive TiO2/HAP composite buildup suitable for biomedical applications.

Harnessing Wharton's jelly stem cell differentiation into bone-like nodule on calcium phosphate substrate without osteoinductive factors.

An important aim of bone regenerative medicine is to design biomaterials with controlled chemical and topographical features to guide stem cell fate towards osteoblasts without addition of specific osteogenic factors. Herein, we find that sprayed bioactive and biocompatible calcium phosphate substrates (CaP) with controlled topography induce, in a well-orchestrated manner, Wharton's jelly stem cells (WJ-SCs) differentiation into osteoblastic lineage without any osteogenic supplements. The resulting WJ-SCs commitment exhibits features of native bone, through the formation of three-dimensional bone-like nodule with osteocyte-like cells embedded into a mineralized type I collagen. To our knowledge, these results present the first observation of a whole differentiation process from stem cell to osteocytes-like on a synthetic material. This suggests a great potential of sprayed CaP and WJ-SCs in bone tissue engineering. These unique features may facilitate the transition from bench to bedside and the development of successful engineered bone. STATEMENT OF SIGNIFICANCE: Designing materials to direct stem cell fate has a relevant impact on stem cell biology and provides insights facilitating their clinical application in regenerative medicine. Inspired by natural bone compositions, a friendly automated spray-assisted system was used to build calcium phosphate substrate (CaP). Sprayed biomimetic solutions using mild conditions led to the formation of CaP with controlled physical properties, good bioactivity and biocompatibility. Herein, we show that via optimization of physical properties, CaP substrate induce osteogenic differentiation of Wharton's jelly stem cells (WJ-SCs) without adding osteogenic supplement factors. These results suggest a great potential of sprayed CaP and WJ-SCs in bone tissue engineering and may facilitate the transition from bench to beside and the development of clinically successful engineered bone.

Bone disease in cystic fibrosis: new pathogenic insights opening novel therapies.

Mutations within the gene encoding for the chloride ion channel cystic fibrosis transmembrane conductance regulator (CFTR) results in cystic fibrosis (CF), the most common lethal autosomal recessive genetic disease that causes a number of long-term health problems, as the bone disease. Osteoporosis and increased vertebral fracture risk associated with CF disease are becoming more important as the life expectancy of patients continues to improve. The etiology of low bone density is multifactorial, most probably a combination of inadequate peak bone mass during puberty and increased bone losses in adults. Body mass index, male sex, advanced pulmonary disease, malnutrition and chronic therapies are established additional risk factors for CF-related bone disease (CFBD). Consistently, recent evidence has confirmed that CFTR plays a major role in the osteoprotegerin (OPG) and COX-2 metabolite prostaglandin E2 (PGE2) production, two key regulators in the bone formation and regeneration. Several others mechanisms were also recognized from animal and cell models contributing to malfunctions of osteoblast (cell that form bone) and indirectly of bone-resorpting osteoclasts. Understanding such mechanisms is crucial for the development of therapies in CFBD. Innovative therapeutic approaches using CFTR modulators such as C18 have recently shown in vitro capacity to enhance PGE2 production and normalized the RANKL-to-OPG ratio in human osteoblasts bearing the mutation F508del-CFTR and therefore potential clinical utility in CFBD. This review focuses on the recently identified pathogenic mechanisms leading to CFBD and potential future therapies for treating CFBD.

Gene screening of Wharton's jelly derived stem cells.

Stem cells are the most powerful candidate for the treatment of various diseases. Suitable stem cell source should be harvested with minimal invasive procedure, found in great quantity, and transplanted with no risk of immune response and tumor formation. Fetal derived stem cells have been introduced as an excellent alternative to adult and embryonic stem cells use, but unfortunately, their degree of "stemness" and molecular characterization is still unclear. Several studies have been performed deciphering whether fetal stem cells meet the needs of regenerative medicine. We believe that a transcriptomic screening of Wharton's jelly stem cells will bring insights on cell population features.

Chitosan/hydroxyapatite hybrid scaffold for bone tissue engineering.

BACKGROUND: To favor regeneration following critical bone defect, a combination of autologous bone graft and biomaterials is currently used. Major drawbacks of such techniques remain the availability of the autologous material and the second surgical site, inducing pain and morbidity. OBJECTIVE: Our aim was to investigate the biocompatibility in vitro of three dimensions hybrid biodegradable scaffolds combining osteoconductive properties of hydroxyapatite and anti-inflammatory properties of chitosan. METHODS: Hybrid scaffolds were characterized by microscopic observations, equilibrium swelling ratio and overtime weight loss measurements. In vitro studies were performed using primary human bone cells cultured for 7, 14 and 21 days. Cell viability, proliferation, morphology and differentiation through alkaline phosphatase (ALP) activity measurement were assessed. RESULTS: Characterization of our scaffolds demonstrated porous, hydrophilic and biodegradable characteristics. In vitro studies showed that these scaffolds have induced slight decrease in cell death and proliferation comparing to the culture plastic substrate control condition, as well as increased short term osteoinductive properties. CONCLUSIONS: In this study, we have provided evidence that our hybrid hydroxyapatite/chitosan scaffolds could be suitable for bone filling.

Induction of sulfadiazine resistance in vitro in Toxoplasma gondii.

We induced sulfadiazine resistance in two sulfadiazine sensitive strains of Toxoplasma gondii, RH (Type I) and ME-49 (Type II) in vitro by using drug pressure. At first, sulfadiazine susceptibility of the two sensitive strains and two naturally resistant strains of T. gondii was evaluated on Vero cells using an enzyme-linked immunosorbent assay (ELISA). The IC(50) values of sulfadiazine were 77 µg/mL for RH, 51 µg/mL for ME-49 and higher than 1000 µg/mL for the two natural resistant strains. Secondly, induced resistance of the strains by gradually increase sulfadiazine concentration was verified by this test, which resulted IC(50) values at higher than 1000 µg/mL. In conclusion we developed in vitro two sulfadiazine resistant strains called RH-R(SDZ) and ME-49-R(SDZ). These strains resistant to sulfadiazine would be useful to characterize resistance mechanisms to sulfadiazine.

Intracellular calcium oscillations in articular chondrocytes induced by basic calcium phosphate crystals lead to cartilage degradation.

OBJECTIVE: Basic calcium phosphate (BCP) crystals, including octacalcium phosphate (OCP), carbonated-apatite (CA) and hydroxyapatite (HA) crystals are associated with destructive forms of osteoarthritis. Mechanisms of BCP-induced cartilage breakdown remain incompletely understood. We assessed the ability of BCP to induce changes in intracellular calcium (iCa(2+)) content and oscillations and the role of iCa(2+) in BCP-induced cartilage degradation. METHODS: Bovine articular chondrocytes (BACs) and bovine cartilage explants (BCEs) were stimulated with BCP or monosodium urate (MSU) crystals. iCa(2+) levels were determined by spectrofluorimetry and oscillations by confocal microscopy. mRNA expression of matrix metalloproteinase 3 (MMP-3), a disintegrin and metalloprotease with thrombospondin-like motifs 4 (ADAMTS-4) and ADAMTS-5 was assessed by quantitative real-time PCR. Glycosaminoglycan (GAG) release was measured in the supernatants of BCE cultures. RESULTS: All three BCP crystals significantly increased iCa(2+) content. OCP also induced iCa(2+) oscillations. Rate of BACs displaying iCa(2+) oscillations increased over time, with a peak after 20 min of stimulation. OCP-induced iCa(2+) oscillations involved both extracellular Ca(2+) (eCa(2+)) influx and iCa(2+) stores. Indeed, OCP-induced iCa(2+) oscillations decreased rapidly in Ca(2+)-free medium. Both voltage- and non-voltage-dependent Ca(2+) channels were involved in eCa(2+) influx. BCP crystal-induced variation in iCa(2+) content was associated with BCP crystal-induced cartilage matrix degradation. However, iCa²(+) was not associated with OCP crystal-induced mRNA expression of MMP-3, ADAMTS-4 or ADAMTS-5. CONCLUSION: BCP crystals can induce variation in iCa(2+) content and oscillations in articular chondrocytes. Furthermore, BCP crystal-induced changes in iCa(2+) content play a pivotal role in BCP catabolic effects on articular cartilage.

Effect of strontium-substituted biphasic calcium phosphate on inflammatory mediators production by human monocytes.

Calcium phosphate materials are widely used as bone substitutes because of their properties close to those of the mineral phase of bones. Nevertheless, after several months, calcium phosphate-based materials release particles that may be phagocytosed by monocytes, leading to an inflammatory reaction. Strontium is well known to counteract the osteoporosis process, but little is known about its effect on inflammatory processes. The purpose of this work was to study the effect of biphasic calcium phosphate (BCP) particles substituted with strontium on the inflammatory reaction. Human primary monocytes stimulated or not by lipopolysaccharide (LPS) were exposed to BCP particles containing strontium for 6 and 24 h. Inflammatory mediators (cytokines and matrix metalloproteinases (MMPs)) production was then quantified by ELISA and zymography. We observed that the presence of strontium had few effects on unstimulated cells, but it decreased the production of pro-inflammatory cytokines and the chemokine interleukin 8 in LPS-stimulated cell-conditioned medium. This work suggests for the first time that strontium may be involved in the control of inflammatory processes following BCP phagocytosis by human monocytes.

In vitro dissolution and corrosion study of calcium phosphate coatings elaborated by pulsed electrodeposition current on Ti6Al4V substrate.

Calcium-deficient hydroxyapatite (Ca-def-HAP) coatings on titanium alloy (Ti6Al4V) substrates are elaborated by pulsed electrodeposition. In vitro dissolution/precipitation process is investigated by immersion of the coated substrate into Dulbecco's Modified Eagle Medium (DMEM) from 1 h to 28 days. Calcium and phosphorus concentrations evolution in the biological liquid are determined by Induced Coupled Plasma-Atomic Emission Spectroscopy (ICP-AES) for each immersion time. Physical and chemical characterizations of the coating are performed by scanning electron microscopy (SEM) associated to Energy Dispersive X-ray Spectroscopy (EDXS) for X-ray microanalysis. Surface modifications are investigated by an original method based on the three-dimensional reconstruction of SEM images (3D-SEM). Moreover, corrosion measurements are carried out by potentiodynamic polarization experiments. The results show that the precipitation rate of the Ca-def HAP coating is more pronounced in comparison with that of stoichiometric hydroxyapatite (HAP) used as reference. The precipitated bone-like apatite coating is thick, homogenous and exhibits an improved link to the substrate. Consequently, the corrosion behaviour of the elaborated prosthetic material is improved.