RESUMEN
Acetaminophen (ACT), sulfapyridine (SPY), ibuprofen (IBP) and docusate (DCT) are pharmaceuticals with widespread usage that experience incomplete removal in wastewater treatment systems. While further removal of these pharmaceuticals from wastewater effluent is desired prior to beneficial reuse, additional treatment technologies are often expensive and energy intensive. This study evaluated the ability of biochar produced from cotton gin waste (CG700) and walnut shells (WS800) to remove four pharmaceuticals (ACT, SPY, IBP, and DCT) from aqueous solution. Physico-chemical properties of the biochars were characterized by Brunauer-Emmett-Teller (BET) analysis, scanning electron microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR), and zeta potential. The increased pyrolysis temperature during the production of WS800 led to an increase in the specific surface area and increased dehydration of the biochar represented by the loss of the OH-group. Fixed-bed column experiments were performed to determine the difference in removal efficiency between the biochars and elucidate the effects of biochar properties on the adsorption capacity for the pharmaceuticals of interest. Results showed that CG700 had a greater affinity for removing DCT (99%) and IBP (50%), while WS800 removed 72% of SPY and 68% of ACT after 24 h. Adsorption was influenced by the solution pH, surface area, net charge, and functional groups of the biochars. The mechanisms for removal included pore filling and diffusion, hydrophobic interactions, hydrogen bonding, and π-π electron donor acceptor interactions. To conduct predictive modeling of the column breakthrough curves, the Thomas, Adams-Bohart, and Yoon-Nelson models were applied to the experimental data. Results demonstrated that these models generally provided a poor fit for the description of asymmetrical breakthrough curves. Overall, the results demonstrate that biochars from cotton gin waste and walnut shells could be used as cost-effective, environmentally friendly alternatives to activated carbon for the removal of pharmaceuticals from aqueous solutions.
Asunto(s)
Juglans , Contaminantes Químicos del Agua , Carbón Orgánico/química , Espectroscopía Infrarroja por Transformada de Fourier , Agua/química , Sulfapiridina , Preparaciones Farmacéuticas , Adsorción , Contaminantes Químicos del Agua/análisis , Cinética , SolucionesRESUMEN
Viral contamination of drinking water due to fecal contamination is difficult to detect and treat effectively, leading to frequent outbreaks worldwide. The purpose of this paper is to report on the molecular mechanism for unprecedented high virus removal from a practical sand filter. Sand filters functionalized using a water extract of Moringa oleifera (MO) seeds, functionalized sand (f-sand) filters, achieved a â¼7 log10 virus removal. These tests were conducted with MS2 bacteriophage, a recognized surrogate for pathogenic norovirus and rotavirus. We studied the molecular mechanism of this high removal since it can have important implications for sand filtration, the most common water treatment technology worldwide. Our data reveal that the virus removal activity of f-sand is due to the presence of a chitin-binding protein, M. oleifera chitin-binding protein (MoCBP) on f-sand. Standard column experiments were supported by proteomic analysis and molecular docking simulations. Our simulations show that MoCBP binds preferentially to MS2 capsid proteins demonstrating that specific molecular interactions are responsible for enhanced virus removal. In addition, we simplified the process of making f-sand and evinced how it could be regenerated using saline water. At present, no definitive solution exists for the challenge of treating fecally contaminated drinking and irrigation water for viruses without using technologies that demand high energy or chemical consumption. We propose functionalized sand (f-sand) filters as a highly effective, energy-efficient, and practical technology for virus removal applicable to both developing and developed countries.
Asunto(s)
Proteómica , Purificación del Agua , Filtración , Levivirus , Simulación del Acoplamiento Molecular , Dióxido de SilicioRESUMEN
Motivated by the proposed use of cationic protein-modified sand for water filtration in developing nations, this study concerns the adsorption of Moringa oleifera seed proteins to silica surfaces. These proteins were prepared in model waters of varying hardness and underwent different levels of fractionation, including fatty acid extraction and cation exchange chromatography. Adsorption isotherms were measured by ellipsometry, and the zeta potentials of the resulting protein-decorated surfaces were measured by the rotating disk streaming potential method. The results indicate that the presence of fatty acids has little effect on the M. oleifera cationic protein adsorption isotherm. Adsorption from the unfractionated extract was indistinguishable from that of the cationic protein isolates at low concentrations but yielded significantly greater extents of adsorption at high concentrations. Adsorption isotherms for samples prepared in model hard and soft fresh waters were indistinguishable from each other over the measured bulk solution concentration range, but adsorption from hard or soft water was more extensive than adsorption from deionized water at moderate protein concentrations. Streaming potential measurements showed that adsorption reversed the net sign of the zeta potential of silica from negative to positive for all protein fractions and water hardness conditions at protein bulk concentrations as low as 0.03 µg/mL. This suggests that sands can be effectively modified with M. oleifera proteins using small amounts of seed extract under various local water hardness conditions. Finally, ellipsometry indicated that M. oleifera proteins adsorb irreversibly with respect to rinsing in these model fresh waters, suggesting that the modified sand would be stable on repeated use for water filtration. These studies may aid in the design of a simple, effective, and sustainable water purification device for developing nations.
Asunto(s)
Moringa oleifera/química , Proteínas de Plantas/química , Semillas/química , Dióxido de Silicio/química , Purificación del Agua/instrumentación , Purificación del Agua/métodos , Agua/química , Adsorción , Ácidos Grasos/química , Minerales/química , Proteínas de Plantas/aislamiento & purificaciónRESUMEN
A cationic protein isolated from the seeds of the Moringa oleifera tree has been extensively studied for use in water treatment in developing countries and has been proposed for use in antimicrobial and therapeutic applications. However, the molecular basis for the antimicrobial action of this peptide, Moringa oleifera cationic protein (MOCP), has not been previously elucidated. We demonstrate here that a dominant mechanism of MOCP antimicrobial activity is membrane fusion. We used a combination of cryogenic electron microscopy (cryo-EM) and fluorescence assays to observe and study the kinetics of fusion of membranes in liposomes representing model microbial cells. We also conducted cryo-EM experiments on E. coli cells where MOCP was seen to fuse the inner and outer membranes. Coarse-grained molecular dynamics simulations of membrane vesicles with MOCP molecules were used to elucidate steps in peptide adsorption, stalk formation, and fusion between membranes.
Asunto(s)
Antibacterianos/farmacología , Membrana Celular/efectos de los fármacos , Escherichia coli/efectos de los fármacos , Moringa oleifera/química , Proteínas de Plantas/farmacología , Semillas/química , Secuencia de Aminoácidos , Antibacterianos/química , Antibacterianos/aislamiento & purificación , Cationes , Membrana Celular/química , Membrana Celular/ultraestructura , Microscopía por Crioelectrón , Escherichia coli/química , Escherichia coli/ultraestructura , Floculación , Agua Dulce/microbiología , Cinética , Liposomas/química , Liposomas/ultraestructura , Fusión de Membrana/efectos de los fármacos , Simulación de Dinámica Molecular , Datos de Secuencia Molecular , Extractos Vegetales/química , Proteínas de Plantas/química , Proteínas de Plantas/aislamiento & purificación , Estructura Secundaria de Proteína , Espectrometría de Fluorescencia , Purificación del Agua/métodosRESUMEN
Moringa oleifera (Moringa) seeds contain a natural cationic protein (MOCP) that can be used as an antimicrobial flocculant for water clarification. Currently, the main barrier to using Moringa seeds for producing potable water is that the seeds release other water-soluble proteins and organic matter, which increase the concentration of dissolved organic matter (DOM) in the water. The presence of this DOM supports the regrowth of pathogens in treated water, preventing its storage and later use. A new strategy has been established for retaining the MOCP protein and its ability to clarify and disinfect water while removing the excess organic matter. The MOCP is first adsorbed and immobilized onto sand granules, followed by a rinsing step wherein the excess organic matter is removed, thereby preventing later growth of bacteria in the purified water. Our hypotheses are that the protein remains adsorbed onto the sand after the functionalization treatment, and that the ability of the antimicrobial functionalized sand (f-sand) to clarify turbidity and kill bacteria, as MOCP does in bulk solution, is maintained. The data support these hypotheses, indicating that the f-sand removes silica microspheres and pathogens from water, renders adhered Escherichia coli bacteria nonviable, and reduces turbidity of a kaolin suspension. The antimicrobial properties of f-sand were assessed using fluorescent (live-dead) staining of bacteria on the surface of the f-sand. The DOM that can contribute to bacterial regrowth was shown to be significantly reduced in solution, by measuring biochemical oxygen demand (BOD). Overall, these results open the possibility that immobilization of the MOCP protein onto sand can provide a simple, locally sustainable process for producing storable drinking water.
Asunto(s)
Antiinfecciosos/química , Antiinfecciosos/farmacología , Moringa oleifera , Proteínas de Plantas/química , Dióxido de Silicio/química , Dióxido de Silicio/farmacología , Adsorción , Escherichia coli/efectos de los fármacos , Escherichia coli/fisiología , Viabilidad Microbiana/efectos de los fármacosRESUMEN
Counterions affect not only the bulk and interfacial self-assembly of ionic surfactants but also their competitive adsorption with similarly charged polyelectrolytes. Here, we explore the specific effects of bromide, chloride, and the bulky, somewhat hydrophobic tosylate counterion on the adsorption of hexadecyltrimethylammonium surfactants (CTA(+)), the adsorption of polylysine (PL), and the co-adsorption of CTA(+) and PL on negatively charged silica surfaces. Similar to bulk self-assembly, increasing the micellar binding affinity of the counterion from chloride to bromide to tosylate promoted interfacial self-assembly in the absence of polylysine. During co-adsorption, the presence of the polylysine decreased the adsorbed amount of CTA(+) in all cases. Polylysine was more effective at hindering CTA(+) adsorption when the surfactant concentration was below the critical micelle concentration. Although these systems were strongly influenced by persistent nonequilibrium states, it was possible to demonstrate that polylysine was able to prevent CTA(+) admicelle formation below the cmc only when the thermodynamic driving forces for adsorption of the polymer and the surfactant were comparable. Solution compositions where that condition was met depended on the identity of the counterion. Below the bulk cmc, CTAT adsorption displayed the greatest degree of cooperativity, and it also was the most susceptible to hindered adsorption by polylysine.