Colloidal Engineering of Microplastic Capture with Biodegradable Soft Dendritic "Microcleaners".

The introduction of colloidal principles that enable efficient microplastic collection from aquatic environments is a goal of great environmental importance. Here, we present a novel method of microplastic (MP) collection using biodegradable hydrogel soft dendritic colloids (hSDCs). These dendritic colloids have abundant nanofibrils and a large surface area, which provide an abundance of interfacial interactions and excellent networking capabilities, allowing for the capture of plastic particles and other contaminants. Here, we show how the polymer composition and morphology of the hSDCs can impact the capture of microplastics modeled by latex microbeads. Additionally, we use colloidal DLVO theory to interpret the capture efficiencies of microbeads of different sizes and surface functional groups. The results demonstrate the microplastic remediation efficiency of hydrogel dendricolloids and highlight the primary factors involved in the microbead interactions and adsorption. On a practical level, the results show that the development of environmentally benign microcleaners based on naturally sourced materials could present a sustainable solution for microplastic cleanup.

Harvesting and manipulating sweat and interstitial fluid in microfluidic devices.

Microfluidic devices began to be used to facilitate sweat and interstitial fluid (ISF) sensing in the mid-2010s. Since then, numerous prototypes involving microfluidics have been developed in different form factors for sensing biomarkers found in these fluids under in vitro, ex vivo, and in vivo (on-body) settings. These devices transport and manipulate biofluids using microfluidic channels composed of silicone, polymer, paper, or fiber. Fluid flow transport and sample management can be achieved by controlling the flow rate, surface morphology of the channel, and rate of fluid evaporation. Although many devices have been developed for estimating sweat rate, electrolyte, and metabolite levels, only a handful have been able to proceed beyond laboratory testing and reach the stage of clinical trials and commercialization. To further this technology, this review reports on the utilization of microfluidics towards sweat and ISF management and transport. The review is distinguished from other recent reviews by focusing on microfluidic principles of sweat and ISF generation, transport, extraction, and management. Challenges and prospects are highlighted, with a discussion on how to transition such prototypes towards personalized healthcare monitoring systems.

Polymer Color Intelligence: Effect of Materials, Instruments, and Measurement Techniques - A Review.

Transparent polymers and plastics are used to create molded parts and films for many applications. The colors of these products are of great importance for the suppliers, manufacturers, and end-users. However, for simplicity of the processing, the plastics are produced in the form of small pellets or granules. The predictive measurement of the color of such materials is a challenging process and needs consideration of a complex set of factors. A combination of color measurement systems in transmittance and reflectance modes need to be used for such materials, along with the techniques for minimizing the artifacts based on surface texture and particle sizes. This article provides an extensive overview and discussion of the various factors that can affect the perceptive colors and the methods used for the characterization of the colors and minimizing the measuring artifacts.

Computational investigation of the phase behavior of colloidal squares with offset magnetic dipoles.

Colloidal particles with anisotropic shapes and interactions display rich phase behavior and have potential as structural bases for materials with controllable properties. In this paper, we explore the self-assembling characteristics of a new class of particles that have been shown experimentally to form reconfigurable structures: microscopic cube-shaped colloids with a magnetic dipole that is transversely offset from the particle's center of mass. We have performed in silico simulations of the dynamics of large numbers of dipolar squares in two-dimensions using discontinuous molecular dynamics (DMD). We use a coarse-grain method where the dipolar microcubes are represented by a group of four hard circles bonded together to create a rigid square in two-dimensions and two opposite charges are embedded within the square to represent a magnetic dipole. Annealing, or "slow-cooling", simulations are conducted to determine the equilibrium structures. Systems of dipolar squares tend to assemble into one of two different types of conformations: either single- or double-stranded assemblies, each with unique structures and phase diagrams in the temperature-density plane. Single-stranded assemblies form highly interconnected percolated, or gel-like, networks. In contrast, double stranded assemblies tend to form globally-aligned nematic states at high densities, although this is not seen consistently in all runs. The phase behavior of systems of dipolar squares depends not only on the system's temperature and density, but also on the type of dipole embedded within the square and on the relative number of squares with an opposite "handedness" that are present within the system.

Assembly and manipulation of responsive and flexible colloidal structures by magnetic and capillary interactions.

The long-ranged interactions induced by magnetic fields and capillary forces in multiphasic fluid-particle systems facilitate the assembly of a rich variety of colloidal structures and materials. We review here the diverse structures assembled from isotropic and anisotropic particles by independently or jointly using magnetic and capillary interactions. The use of magnetic fields is one of the most efficient means of assembling and manipulating paramagnetic particles. By tuning the field strength and configuration or by changing the particle characteristics, the magnetic interactions, dynamics, and responsiveness of the assemblies can be precisely controlled. Concurrently, the capillary forces originating at the fluid-fluid interfaces can serve as means of reconfigurable binding in soft matter systems, such as Pickering emulsions, novel responsive capillary gels, and composites for 3D printing. We further discuss how magnetic forces can be used as an auxiliary parameter along with the capillary forces to assemble particles at fluid interfaces or in the bulk. Finally, we present examples how these interactions can be used jointly in magnetically responsive foams, gels, and pastes for 3D printing. The multiphasic particle gels for 3D printing open new opportunities for making of magnetically reconfigurable and "active" structures.

Fluid Flow Templating of Polymeric Soft Matter with Diverse Morphologies.

It is challenging to find a conventional nanofabrication technique that can consistently produce soft polymeric matter of high surface area and nanoscale morphology in a way that is scalable, versatile, and easily tunable. Here, the capabilities of a universal method for fabricating diverse nano- and micro-scale morphologies based on polymer precipitation templated by the fluid streamlines in multiphasic flow are explored. It is shown that while the procedure is operationally simple, various combinations of its intertwined mechanisms can controllably and reproducibly lead to the formation of an extraordinary wide range of colloidal morphologies. By systematically investigating the process conditions, 12 distinct classes of polymer micro- and nano-structures including particles, rods, ribbons, nanosheets, and soft dendritic colloids (dendricolloids) are identified. The outcomes are interpreted by delineating the physical processes into three stages: hydrodynamic shear, capillary and mechanical breakup, and polymer precipitation rate. The insights into the underlying fundamental mechanisms provide guidance toward developing a versatile and scalable nanofabrication platform. It is verified that the liquid shear-based technique is versatile and works well with many chemically diverse polymers and biopolymers, showing potential as a universal tool for simple and scalable nanofabrication of many morphologically distinct soft matter classes.

Superhydrophobic and Anti-Icing Coatings Made of Hierarchically Nanofibrillated Polymer Colloids.

The deposition of coatings with hierarchical morphology from hydrophobic and hydrophilic polymers is a common approach for making superhydrophobic and superhydrophilic coatings. The water-repellent, water-wicking, and anti-icing coatings reported here are made from a class of materials called soft dendritic colloids (SDCs). The branched, nanofibrous SDCs are produced in suspension through nonsolvent-induced phase separation in a turbulent medium. The properties of coatings formed by drying ethanol suspensions of SDCs made of polystyrene, polyvinyl alcohol, and polyester are compared. The highly branched SDC morphology creates entangled, porous coating layers with strong physical adhesion to the substrate due to the multitude of nanofiber sub-contacts analogous to the "gecko leg effect". Polystyrene SDC coatings show excellent superhydrophobicity but weaker adhesion due to low surface energy. Alternatively, polyvinyl alcohol SDC coatings show superhydrophilicity and strong adhesion from their high surface energy. Two strategies to improve the adhesivity and cohesivity of the SDCs layers are shown effective - use of intertwined networks and of silicone droplet microbinders. The water repulsion, together with the air trapped in the blended superhydrophobic coatings also makes them effective against ice nucleation and adhesion. Finally, these SDCs make thin, flexible, and durable nonwovens with similar properties.

Wireless Wearable Electrochemical Sensing Platform with Zero-Power Osmotic Sweat Extraction for Continuous Lactate Monitoring.

Wearable and wireless monitoring of biomarkers such as lactate in sweat can provide a deeper understanding of a subject's metabolic stressors, cardiovascular health, and physiological response to exercise. However, the state-of-the-art wearable and wireless electrochemical systems rely on active sweat released either via high-exertion exercise, electrical stimulation (such as iontophoresis requiring electrical power), or chemical stimulation (such as by delivering pilocarpine or carbachol inside skin), to extract sweat under low-perspiring conditions such as at rest. Here, we present a continuous sweat lactate monitoring platform combining a hydrogel for osmotic sweat extraction, with a paper microfluidic channel for facilitating sweat transport and management, a screen-printed electrochemical lactate sensor, and a custom-built wireless wearable potentiostat system. Osmosis enables zero-electrical power sweat extraction at rest, while continuous evaporation at the end of a paper channel allows long-term sensing from fresh sweat. The positioning of the lactate sensors provides near-instantaneous sensing at low sweat volume, and the custom-designed potentiostat supports continuous monitoring with ultra-low power consumption. For a proof of concept, the prototype system was evaluated for continuous measurement of sweat lactate across a range of physiological activities with changing lactate concentrations and sweat rates: for 2 h at the resting state, 1 h during medium-intensity exercise, and 30 min during high-intensity exercise. Overall, this wearable system holds the potential of providing comprehensive and long-term continuous analysis of sweat lactate trends in the human body during rest and under exercising conditions.

Efficacy and Mechanisms of Copper Ion-Catalyzed Inactivation of Human Norovirus.

The antinoroviral effect of copper ions is well known, yet most of this work has previously been conducted in copper and copper alloy surfaces, not copper ions in solution. In this work, we characterized the effects that Cu ions have on human norovirus capsids' and surrogates' integrity to explain empirical data, indicating virus inactivation by copper alloy surfaces, and as means of developing novel metal ion-based virucides. Comparatively high concentrations of Cu(II) ions (>10 mM) had little effect on the infectivity of human norovirus surrogates, so we used sodium ascorbate as a reducing agent to generate unstable Cu(I) ions from solutions of copper bromide. We found that significantly lower concentrations of monovalent copper ions (∼0.1 mM) compared to divalent copper ions cause capsid protein damage that prevents human norovirus capsids from binding to cell receptors in vitro and induce a greater than 4-log reduction in infectivity of Tulane virus, a human norovirus surrogate. Further, these Cu(I) solutions caused reduction of GII.4 norovirus from stool in suspension, producing about a 2-log reduction of virus as measured by a reverse transcriptase-quantitative polymerase chain reaction. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) data indicate substantial major capsid protein cleavage of both GI.7 and GII.4 norovirus capsids, and TEM images show the complete loss of capsid integrity of GI.7 norovirus. GII.4 virus-like particles (VLPs) were less susceptible to inactivation by copper ion treatments than GI.7 VLPs based upon receptor binding and SDS-PAGE analysis of viral capsids. The combined data demonstrate that stabilized Cu(I) ion solutions show promise as highly effective noroviral disinfectants in solution that can potentially be utilized at low concentrations for inactivation of human noroviruses.

Controlled adhesion, membrane pinning and vesicle transport by Janus particles.

The interactions between biomembranes and particles are key to many applications, but the lack of controllable model systems to study them limits the progress in their research. Here, we describe how Janus polystyrene microparticles, half coated with iron, can be partially engulfed by artificial cells, namely giant vesicles, with the goals to control and investigate their adhesion and degree of encapsulation. The interaction between the Janus particles and these model cell membrane systems is mediated by electrostatic charge, offering a further mode of modulation in addition to the iron patches. The ferromagnetic particle coatings also enable manipulation and transport of the vesicles by magnetic fields.

A Critical Review of the Performance and Soil Biodegradability Profiles of Biobased Natural and Chemically Synthesized Polymers in Industrial Applications.

This review explores biobased polymers for industrial applications, their end fate, and most importantly, origin and key aspects enabling soil biodegradation. The physicochemical properties of biobased synthetic and natural polymers and the primary factors governing degradation are explored. Current and future biobased systems and factors allowing for equivalent comparisons of degradation and possible sources for engineering improved biodegradation are reviewed. Factors impacting ultraviolet (UV) stability of biopolymers have been described including methods to enhance photoresistance and impact on biodegradation. It discusses end-fate of biopolymers in soil and impact of residues on soil health. A limited number of studies examine side effects (e.g., microbial toxicity) from soil biodegradation of composites and biopolymers. Currently available standards for biodegradation and composting have been described with limitations and scope for improvements. Finally, design considerations and implications for sustainable polymers used, under consideration, and to be considered within the context of a rational biodegradable strategy are elaborated.

What makes epoxy-phenolic coatings on metals ubiquitous: Surface energetics and molecular adhesion characteristics.

HYPOTHESIS: Wetting characteristics of epoxy and phenolic resins on metals depend on the molecular interactions between resins' functional groups and metal surface. Those interactions affect the practical adhesion strength of epoxy-phenolic coatings on metals. Estimation of the theoretical adhesion energies can reveal this system's microscopic adhesion mechanisms. EXPERIMENTS: Adhesion is estimated theoretically based on resins' wettability on metals, and experimentally through pull-off adhesion testing of cured coatings. The effect of various functional groups on adhesion is decoupled using epoxy and phenolic resins with different functionalities. To assess the impact of the metal passivation on adhesion, tinplated and tin-free steel substrates are used. Differences in their surface chemical composition and polarity are investigated using XPS. FINDINGS: Theoretical adhesion results reveal a superior adhesion of epoxy compared to phenolic resins. Moreover, epoxy resins having a higher content of epoxide-to-hydroxyl groups show improved theoretical and practical adhesion. The importance of epoxides in driving resins' initial adhesion on metals is attributed to the formation of direct chemical bonds with active hydrogen on metal surfaces. The adhesion of coatings on tin-free steel is found to be higher than on tinplated steel. This is associated to the increased hydroxyl fraction on tin-free steel surface leading to more hydrogen bonds formation.

Osmotically Enabled Wearable Patch for Sweat Harvesting and Lactate Quantification.

Lactate is an essential biomarker for determining the health of the muscles and oxidative stress levels in the human body. However, most of the currently available sweat lactate monitoring devices require external power, cannot measure lactate under low sweat rates (such as in humans at rest), and do not provide adequate information about the relationship between sweat and blood lactate levels. Here, we discuss the on-skin operation of our recently developed wearable sweat sampling patch. The patch combines osmosis (using hydrogel discs) and capillary action (using paper microfluidic channel) for long-term sweat withdrawal and management. When subjects are at rest, the hydrogel disc can withdraw fluid from the skin via osmosis and deliver it to the paper. The lactate amount in the fluid is determined using a colorimetric assay. During active sweating (e.g., exercise), the paper can harvest sweat even in the absence of the hydrogel patch. The captured fluid contains lactate, which we quantify using a colorimetric assay. The measurements show the that the total number of moles of lactate in sweat is correlated to sweat rate. Lactate concentrations in sweat and blood correlate well only during high-intensity exercise. Hence, sweat appears to be a suitable biofluid for lactate quantification. Overall, this wearable patch holds the potential of providing a comprehensive analysis of sweat lactate trends in the human body.

A Wearable Patch for Prolonged Sweat Lactate Harvesting and Sensing.

Operating at low sweat rates, such as those experienced by humans at rest, is still an unmet need for state-of-the-art wearable sweat harvesting and testing devices for lactate. Here, we report the on-skin performance of a non-invasive wearable sweat sampling patch that can harvest sweat at rest, during exercise, and post-exercise. The patch simultaneously uses osmosis and evaporation for long-term (several hours) sampling of sweat. Osmotic sweat withdrawal is achieved by skin-interfacing a hydrogel containing a concentrated solute. The gel interfaces with a paper strip that transports the fluid via wicking and evaporation. Proof of concept results show that the patch was able to sample sweat during resting and post-exercise conditions, where the lactate concentration was successfully quantified. The patch detected the increase in sweat lactate levels during medium level exercise. Blood lactate remained invariant with exercise as expected. We also developed a continuous sensing version of the patch by including enzymatic electrochemical sensors. Such a battery-free, passive, wearable sweat sampling patch can potentially provide useful information about the human metabolic activity.

Bioscaffold Stiffness Mediates Aerosolized Nanoparticle Uptake in Lung Epithelial Cells.

In this study, highly porous, ultrasoft polymeric mats mimicking human tissues were formed from novel polyurethane soft dendritic colloids (PU SDCs). PU SDCs have a unique fibrillar morphology controlled by antisolvent precipitation. When filtered from suspension, PU SDCs form mechanically robust nonwoven mats. The stiffness of the SDC mats can be tuned for physiological relevance. The unique physiochemical characteristics of the PU SDC particles dictate the mechanical properties resulting in tunable elastic moduli ranging from 200 to 800 kPa. The human lung A549 cells cultured on both stiff and soft PU SDC membranes were found to be viable, capable of supporting the air-liquid interface (ALI) cell culture, and maintained barrier integrity. Furthermore, A549 cellular viability and uptake efficiency of aerosolized tannic acid-coated gold nanoparticles (Ta-Au) was found to depend on elastic modulus and culture conditions. Ta-Au nanoparticle uptake was twofold and fourfold greater on soft PU SDCs, when cultured at submerged and ALI conditions, respectively. The significant increase in endocytosed Ta-Au resulted in a 20% decrease in viability, and a 4-fold increase in IL-8 cytokine secretion when cultured on soft PU SDCs at ALI. Common tissue culture materials exhibit super-physiological elastic moduli, a factor found to be critical in analyzing nanomaterial cellular interactions and biological responses.

Field-Driven Reversible Alignment and Gelation of Magneto-Responsive Soft Anisotropic Microbeads.

Magnetic fields offer untethered control over the assembly, dynamics, and reconfiguration of colloidal particles. However, synthesizing "soft" colloidal particles with switchable magnetic dipole moment remains a challenge, primarily due to strong coupling of the dipoles of the adjacent nanoparticles. In this article, we present a way to overcome this fundamental challenge based on a strategy to synthesize soft microbeads with tunable residual dipole moment. The microbeads are composed of a polydimethylsiloxane (PDMS) matrix with internally embedded magnetic nanoparticles (MNPs). The distribution and orientation of the MNPs within the PDMS bead matrix is controlled by an external magnetic field during the synthesis process, thus allowing for the preparation of anisotropic PDMS microbeads with internal magnetically aligned nanoparticle chains. We study and present the differences in magnetic interactions between microbeads containing magnetically aligned MNPs and microbeads with randomly distributed MNPs. The interparticle interactions in a suspension of microbeads with embedded aligned MNP chains result in the spontaneous formation of percolated networks due to residual magnetization. We proved the tunability of the structure by applying magnetization, demagnetization, and remagnetization cycles that evoke formation, breakup, and reformation of 2D percolated networks. The mechanical response of the microbead suspension was quantified by oscillatory rheology and correlated to the propensity for network formation by the magnetic microbeads. We also experimentally correlated the 2D alignment of the microbeads to the direction of earth's magnetic field. Overall, the results prove that the soft magnetic microbeads enable a rich variety of structures and can serve as an experimental toolbox for modeling interactions in dipolar systems leading to various percolated networks, novel magneto-rheological materials, and smart gels.

Printable homocomposite hydrogels with synergistically reinforced molecular-colloidal networks.

The design of hydrogels where multiple interpenetrating networks enable enhanced mechanical properties can broaden their field of application in biomedical materials, 3D printing, and soft robotics. We report a class of self-reinforced homocomposite hydrogels (HHGs) comprised of interpenetrating networks of multiscale hierarchy. A molecular alginate gel is reinforced by a colloidal network of hierarchically branched alginate soft dendritic colloids (SDCs). The reinforcement of the molecular gel with the nanofibrillar SDC network of the same biopolymer results in a remarkable increase of the HHG's mechanical properties. The viscoelastic HHGs show >3× larger storage modulus and >4× larger Young's modulus than either constitutive network at the same concentration. Such synergistically enforced colloidal-molecular HHGs open up numerous opportunities for formulation of biocompatible gels with robust structure-property relationships. Balance of the ratio of their precursors facilitates precise control of the yield stress and rate of self-reinforcement, enabling efficient extrusion 3D printing of HHGs.

Wearable Osmotic-Capillary Patch for Prolonged Sweat Harvesting and Sensing.

Biomarkers in sweat are a largely untapped source of health information. Most of the currently available sweat harvesting and testing devices are incapable of operating under low-sweat rates such as those experienced by humans at rest. Here we analyze the in vitro and in vivo sampling of sweat through osmosis via the use of a hydrogel interfaced with the skin, without need for active perspiration. The hydrogel also interfaces with paper-based microfluidics to transport the fluid via capillary forces toward a testing zone and then evaporation pad. We show that the hydrogel solute content and area of the evaporation pad regulate the long-term extraction of sweat and its associated biomarkers. The results indicate that the platform can sample biomarkers from a model skin system continuously for approximately 12 h. On-skin testing of the platform on both resting and exercising human subjects confirms that it can sample sweat lactate directly from the surface of skin. The results highlight that lactate in sweat increases with exercise and as a direct result of muscle activity. Implementation of such new principles for sweat fluid harvesting and management via wearable patch devices can contribute toward the advancement of next generation wearables.

In Vivo Toxicity Assessment of Chitosan-Coated Lignin Nanoparticles in Embryonic Zebrafish (Danio rerio).

Lignin is the second most abundant biopolymer on Earth after cellulose. Since lignin breaks down in the environment naturally, lignin nanoparticles may serve as biodegradable carriers of biocidal actives with minimal environmental footprint compared to conventional antimicrobial formulations. Here, a lignin nanoparticle (LNP) coated with chitosan was engineered. Previous studies show both lignin and chitosan to exhibit antimicrobial properties. Another study showed that adding a chitosan coating can improve the adsorption of LNPs to biological samples by electrostatic adherence to oppositely charged surfaces. Our objective was to determine if these engineered particles would elicit toxicological responses, utilizing embryonic zebrafish toxicity assays. Zebrafish were exposed to nanoparticles with an intact chorionic membrane and with the chorion enzymatically removed to allow for direct contact of particles with the developing embryo. Both mortality and sublethal endpoints were analyzed. Mortality rates were significantly greater for chitosan-coated LNPs (Ch-LNPs) compared to plain LNPs and control groups. Significant sublethal endpoints were observed in groups exposed to Ch-LNPs with chorionic membranes intact. Our study indicated that engineered Ch-LNP formulations at high concentrations were more toxic than plain LNPs. Further study is warranted to fully understand the mechanisms of Ch-LNP toxicity.

Principles of long-term fluids handling in paper-based wearables with capillary-evaporative transport.

We construct and investigate paper-based microfluidic devices, which model long-term fluid harvesting, transport, sensing, and analysis in new wearables for sweat analysis. Such devices can continuously wick fluid mimicking sweat and dispose of it on evaporation pads. We characterize and analyze how the action of capillarity and evaporation can cooperatively be used to transport and process sweat mimics containing dissolved salts and model analytes. The results point out that non-invasive osmotic extraction combined with paper microfluidics and evaporative disposal can enable sweat collection and monitoring for durations longer than 10 days. We model the fluid flow in the new capillary-evaporative devices and identify the parameters enabling their long-term operation. We show that the transport rates are sufficiently large to handle natural sweat rates, while we envision that such handling can be interfaced with osmotic harvesting of sweat, a concept that we demonstrated recently. Finally, we illustrate that the salt film deposited at the evaporation pad would eventually lead to cessation of the process but at the same time will preserve a record of analytes that may be used for long-term biomarker monitoring in sweat. These principles can be implemented in future platforms for wearable skin-interfacing assays or electronic biomarker monitors.