"3-in-1" Hybrid Biocatalysts: Association of Yeast Cells Immobilized in a Sol-Gel Matrix for Determining Sewage Pollution.

This study presents a novel ″3-in-1″ hybrid biocatalyst design that combines the individual efficiency of microorganisms while avoiding negative interactions between them. Yeast cells of Ogataea polymorpha VKM Y-2559, Blastobotrys adeninivorans VKM Y-2677, and Debaryomyces hansenii VKM Y-2482 were immobilized in an organosilicon material by using the sol-gel method, resulting in a hybrid biocatalyst. The catalytic activity of the immobilized microorganism mixture was evaluated by employing it as the bioreceptor element of a biosensor. Optical and scanning electron microscopies were used to examine the morphology of the biohybrid material. Elemental distribution analysis confirmed the encapsulation of yeast cells in a matrix composed of methyltriethoxysilane (MTES) and tetraethoxysilane (TEOS) (85 and 15 vol %, respectively). The resulting heterogeneous biocatalyst exhibited excellent performance in determining the biochemical oxygen demand (BOD) index in real surface water samples, with a sensitivity coefficient of 50 ± 3 × 10-3·min-1, a concentration range of 0.3-31 mg/L, long-term stability for 25 days, and a relative standard deviation of 3.8%. These findings demonstrate the potential of the developed hybrid biocatalyst for effective pollution monitoring and wastewater treatment applications.

Hetero-Pathogenic O181:H4 EAHEC Strain of Sequence Type ST678 Associated with Hemolytic-Uremic Syndrome in Schoolchildren in Russia.

BACKGROUND: In the last decade, the importance of hetero-pathogenic enteroaggregative Shiga-toxin-producing E. coli for public health has increased. Recently, we described the genetic background of the EAHEC O181:H4 strain of ST678 carrying the stx2 gene in prophage and five plasmids, including the plasmid-carrying aggR and aaiC genes. Here, we present the morphological and enzymatic characteristics of this strain, as well as susceptibility to antimicrobials, biofilm formation, etc. Methods: Bacterial morphology was studied using an electron microscope. Susceptibility to antimicrobials was determined using the microdilution method. Cytotoxicity was estimated in Vero cells. Virulence was studied on mice. RESULTS: The morphological and enzymatic properties of the hetero-pathogenic EAHEC strain were typical for E. coli; electron microscopy revealed the specific flagella. The strain was susceptible to most antibiotics and disinfectants but resistant to ampicillin and ciprofloxacin and showed a high degree of biofilm formation. Cytotoxicity towards Vero cells was estimated as 80%. CONCLUSIONS: The emergence of a new O181:H4 EAHEC strain poses a potential threat to humans because of the virulence potential that must be taken into account in the epidemiological analysis of outbreaks and sporadic cases of foodborne infections associated with hemolytic-uremic syndrome.

The Antimicrobial and Antibiofilm Potential of New Water-Soluble Tris-Quaternary Ammonium Compounds.

The invention and innovation of highly effective antimicrobials are always crucial tasks for medical and organic chemistry, especially at the current time, when there is a serious threat of shortages of effective antimicrobials following the pandemic. In the study presented in this article, we established a new approach to synthesizing three novel series of bioactive water-soluble tris-quaternary ammonium compounds using an optimized one-pot method, and we assessed their antimicrobial and antibiofilm potential. Five pathogenic microorganisms of the ESKAPE group, including highly resistant clinical isolates, were used as the test samples. Moreover, we highlighted the dependence of antibacterial activity from the hydrophilic-hydrophobic balance of the QACs and noted the significant performance of the desired products on biofilms with MBEC as low as 16 mg/L against bacteria and 8 mg/L against fungi. Particularly notable was the high activity against Pseudomonas aeruginosa and Acinetobacter baumannii, which are among the most resilient bacteria known. The presented work will provide useful insights for future research on the topic.

Multicationic Quaternary Ammonium Compounds: A Framework for Combating Bacterial Resistance.

During previous stages of research, high biocidal activity toward microorganism archival strains has been used as the main indicator in the development of new antiseptic formulations. Although this factor remains one of the most important characteristics of biocide efficiency, the scale of antimicrobial resistance spread causes serious concern. Therefore, focus shifts toward the development of formulations with a stable effect even in the case of prolonged contact with pathogens. Here, we introduce an original isocyanuric acid alkylation method with the use of available alkyl dichlorides, which opened access to a wide panel of multi-QACs with alkyl chains of various lengths between the nitrogen atoms of triazine and pyridine cycles. We used a complex approach for the resulting series of 17 compounds, including their antibiofilm properties, bacterial tolerance development, and antimicrobial activity toward multiresistant pathogenic strains. As a result of these efforts, available compounds have shown higher levels of antibacterial activity against ESKAPE pathogens than widely used commercial QACs. Hit compounds possessed high activity toward clinical bacterial strains and have also demonstrated a long-term biocidal effect without significant development of microorganism tolerance. The overall results indicated a high level of antibacterial activity and the broad application prospects of multi-QACs based on isocyanuric acid against multiresistant bacterial strains.

Thermal Rearrangement of 5-(2-Hydroxy-6-oxocyclohexyl)-5H-chromeno[2,3-b]pyridines.

Some of the most important transformations in organic chemistry are rearrangement reactions, which play a crucial role in increasing synthetic efficiency and molecular complexity. The development of synthetic strategies involving rearrangement reactions, which can accomplish synthetic goals in a very efficient manner, has been an evergreen topic in the synthetic chemistry community. Xanthenes, pyridin-2(1H)-ones, and 1,6-naphthyridines have a wide range of biological activities. In this work, we propose the thermal rearrangement of 7,9-dihalogen-substituted 5-(2-hydroxy-6-oxocyclohexyl)-5H-chromeno[2,3-b]pyridines in DMSO. Previously unknown 5,7-dihalogenated 5-(2,3,4,9-tetrahydro-1H-xanthen-9-yl)-6-oxo-1,6-dihydropyridines and 10-(3,5-dihalogen-2-hydroxyphenyl)-5,6,7,8,9,10-hexahydrobenzo[b][1,6]naphthyridines were synthesized with excellent yields (90-99%). The investigation of the transformation using 1H-NMR monitoring made it possible to confirm the ANRORC mechanism. The structures of synthesized compounds were confirmed by 2D-NMR spectroscopy.

Piperidine Derivatives: Recent Advances in Synthesis and Pharmacological Applications.

Piperidines are among the most important synthetic fragments for designing drugs and play a significant role in the pharmaceutical industry. Their derivatives are present in more than twenty classes of pharmaceuticals, as well as alkaloids. The current review summarizes recent scientific literature on intra- and intermolecular reactions leading to the formation of various piperidine derivatives: substituted piperidines, spiropiperidines, condensed piperidines, and piperidinones. Moreover, the pharmaceutical applications of synthetic and natural piperidines were covered, as well as the latest scientific advances in the discovery and biological evaluation of potential drugs containing piperidine moiety. This review is designed to help both novice researchers taking their first steps in this field and experienced scientists looking for suitable substrates for the synthesis of biologically active piperidines.

From Antibacterial to Antibiofilm Targeting: An Emerging Paradigm Shift in the Development of Quaternary Ammonium Compounds (QACs).

In a previous development stage, mostly individual antibacterial activity was a target in the optimization of biologically active compounds and antiseptic agents. Although this targeting is still valuable, a new trend has appeared since the discovery of superhigh resistance of bacterial cells upon their aggregation into groups. Indeed, it is now well established that the great majority of pathogenic germs are found in the environment as surface-associated microbial communities called biofilms. The protective properties of biofilms and microbial resistance, even to high concentrations of biocides, cause many chronic infections in medical settings and lead to serious economic losses in various areas. A paradigm shift from individual bacterial targeting to also affecting more complex cellular frameworks is taking place and involves multiple strategies for combating biofilms with compounds that are effective at different stages of microbiome formation. Quaternary ammonium compounds (QACs) play a key role in many of these treatments and prophylactic techniques on the basis of both the use of individual antibacterial agents and combination technologies. In this review, we summarize the literature data on the effectiveness of using commercially available and newly synthesized QACs, as well as synergistic treatment techniques based on them. As an important focus, techniques for developing and applying antimicrobial coatings that prevent the formation of biofilms on various surfaces over time are discussed. The information analyzed in this review will be useful to researchers and engineers working in many fields, including the development of a new generation of applied materials; understanding biofilm surface growth; and conducting research in medical, pharmaceutical, and materials sciences. Although regular studies of antibacterial activity are still widely conducted, a promising new trend is also to evaluate antibiofilm activity in a comprehensive study in order to meet the current requirements for the development of highly needed practical applications.

Tetrahydropyridines' Stereoselective Formation, How Lockdown Assisted in the Identification of the Features of Its Mechanism.

The multicomponent reaction of aldehydes, cyano-containing C-H acids, esters of 3-oxocarboxylic acid and ammonium acetate led to unexpected results. The boiling of starting materials in methanol for one to two hours resulted in the formation of polysubstituted 1,4,5,6-tetrahydropyridines with two or three stereogenic centers. During the 2020 lockdown, we obtained key intermediates of this six-step domino reaction. A number of fast and slow reactions occurred during the prolonged stirring of the reaction mass at rt. Sequence: 1. Knoevenagel condensation; 2. Michael addition; 3. Mannich reaction; 4. cyclization-fast reactions and cyclization of the product polysubstituted 2-hydroxypiperidine-was isolated after 40 min stirring at rt. Further monitoring proved the slow dehydration of 2-hydroxypiperidine to obtain 3,4,5,6-tetrahydropyridine after 7 days. Then, four-month isomerization occurred with 1,4,5,6-tetrahydropyridine formation. All reactions were stereoselective. Key intermediates and products structures were verified by X-ray diffraction analysis. Additionally, we specified conditions for the selective intermediates' preparation.

Preparation of Hybrid Sol-Gel Materials Based on Living Cells of Microorganisms and Their Application in Nanotechnology.

Microorganism-cell-based biohybrid materials have attracted considerable attention over the last several decades. They are applied in a broad spectrum of areas, such as nanotechnologies, environmental biotechnology, biomedicine, synthetic chemistry, and bioelectronics. Sol-gel technology allows us to obtain a wide range of high-purity materials from nanopowders to thin-film coatings with high efficiency and low cost, which makes it one of the preferred techniques for creating organic-inorganic matrices for biocomponent immobilization. This review focuses on the synthesis and application of hybrid sol-gel materials obtained by encapsulation of microorganism cells in an inorganic matrix based on silicon, aluminum, and transition metals. The type of immobilized cells, precursors used, types of nanomaterials obtained, and their practical applications were analyzed in detail. In addition, techniques for increasing the microorganism effective time of functioning and the possibility of using sol-gel hybrid materials in catalysis are discussed.

Novel Phenyl-Based Bis-quaternary Ammonium Compounds as Broad-Spectrum Biocides.

Herein we report the synthesis and microbiological evaluation of novel phenyl based bis-quaternary ammonium compounds (bis-QACs). Using a simple 2-step synthetic route from dibromo- and dihydroxybenzenes, we obtained a structurally diverse broad panel of bis-QACs with topologically distinct bridging connections between pyridinium heads. Selected analogs possessed potent broad-spectrum biocidal activity against both bacterial and fungal pathogens: methicillin-resistant Staphylococcus aureus (ATCC 43300); Escherichia coli (ATCC 25922), Klebsiella pneumonia (ATCC 700603), Acinetobacter baumannii (ATCC 19606), Pseudomonas aeruginosa (ATCC 27853), Candida albicans (ATCC 90028), Cryptococcus neoformans var. grubii (ATCC 208821). Promising compounds displayed minimum inhibitory concentrations (MIC) values ≤0.25 µg/mL alongside improved cytotoxicity and hemolytic profiles compared to modern antiseptics. Thus, synthesized bis-QACs represent a promising class of biocides with the potential to replace existing household sanitizers.

Quaternary Ammonium Compounds (QACs) and Ionic Liquids (ILs) as Biocides: From Simple Antiseptics to Tunable Antimicrobials.

Quaternary ammonium compounds (QACs) belong to a well-known class of cationic biocides with a broad spectrum of antimicrobial activity. They are used as essential components in surfactants, personal hygiene products, cosmetics, softeners, dyes, biological dyes, antiseptics, and disinfectants. Simple but varied in their structure, QACs are divided into several subclasses: Mono-, bis-, multi-, and poly-derivatives. Since the beginning of the 20th century, a significant amount of work has been dedicated to the advancement of this class of biocides. Thus, more than 700 articles on QACs were published only in 2020, according to the modern literature. The structural variability and diverse biological activity of ionic liquids (ILs) make them highly prospective for developing new types of biocides. QACs and ILs bear a common key element in the molecular structure-quaternary positively charged nitrogen atoms within a cyclic or acyclic structural framework. The state-of-the-art research level and paramount demand in modern society recall the rapid development of a new generation of tunable antimicrobials. This review focuses on the main QACs exhibiting antimicrobial and antifungal properties, commercial products based on QACs, and the latest discoveries in QACs and ILs connected with biocide development.

Investigations into the structure-activity relationship in gemini QACs based on biphenyl and oxydiphenyl linker.

Eighteen novel gemini quaternary ammonium compounds were synthesized to examine the effect of linker nature, aliphatic chain length and their relative position on antibacterial and antifungal activity. The synthesized compounds showed strong bacteriostatic activity against a panel of both Gram-positive and Gram-negative bacteria, including methicillin-resistant Staphylococcus aureus (MRSA) and two fungi. Some of these compounds exhibited a wider and more potent antimicrobial spectrum than commonly-used antiseptics, such as benzalkonium chloride (BAC), cetylpyridinium chloride (CPC), chlorhexidine digluconate (CHG) and octenidine dihydrochloride (OCT).

Catalyst-Solvent System for PASE Approach to Hydroxyquinolinone-Substituted Chromeno[2,3-b]pyridines Its Quantum Chemical Study and Investigation of Reaction Mechanism.

The Pot, Atom, and Step Economy (PASE) approach is based on the Pot economy principle and unites it with the Atom and Step Economy strategies; it ensures high efficiency, simplicity and low waste formation. The PASE approach is widely used in multicomponent chemistry. This approach was adopted for the synthesis of previously unknown hydroxyquinolinone substituted chromeno[2,3-b]pyridines via reaction of salicylaldehydes, malononitrile dimer and hydroxyquinolinone. It was shown that an ethanol-pyridine combination is more beneficial than other inorganic or organic catalysts. Quantum chemical studies showed that chromeno[2,3-b]pyridines has potential for corrosion inhibition. Real time 1H NMR monitoring was used for the investigation of reaction mechanism and 2-((2H-chromen-3-yl)methylene)malononitrile was defined as a key intermediate in the reaction.

Pot, atom and step economic (PASE) assembly of salicylaldehydes, malononitrile dimer and 4-hydroxypyridine-2(1H)-ones into medicinally relevant 5H-chromeno[2,3-b]pyridine scaffold.

The new multicomponent reaction (MCR) has been found: one-pot selective and efficient formation of the new 5-(4-hydroxy-2-oxo-1,2-dihydropyridin-3-yl)-substituted 5H-chromeno[2,3-b]pyridines in 61-97% yields directly from simple and easily available salicylaldehydes, malononitrile dimer and 4-hydroxypyridine-2(1H)-ones in small amount of pyridine-ethanol catalyst/solvent system. This complex "domino" transformation includes Knoevenagel condensation of salicylaldehyde with malononitrile dimer, Michael addition of 4-hydroxypyridine-2(1H)-one, double Pinner-type reaction cyclization and isomerization with following protonation. This facile multicomponent process opens a new way to 5-(4-hydroxy-2-oxo-1,2-dihydropyridin-3-yl)-substituted 5H-chromeno[2,3-b]pyridine systems, which are promising compounds for the treatment for human inflammatory TNFα-mediated diseases and different biomedical applications.

One-pot five-component high diastereoselective synthesis of polysubstituted 2-piperidinones from aromatic aldehydes, nitriles, dialkyl malonates and ammonium acetate.

A novel five-component diastereoselective synthesis of polysubstituted 2-piperidinones is reported. The Knoevenagel condensation-Michael addition-Mannich cascade of two equivalents of aromatic aldehydes, nitriles, dialkyl malonates and ammonium acetate or aqueous ammonia in alcohols provides convenient access to alkyl (3SR,4RS,6SR)-5,5-dicyano-2-oxo-4,6-diarylpiperidine-3-carboxylates with three stereocenters in 52-90% or dialkyl (2SR,3RS,4RS,5SR)-2,4-diaryl-3-cyano-6-oxopiperidine-3,5-dicarboxylates with four stereocenters in 38-88%. The formation of products was highly stereoselective, with only one diastereomer formed. Ammonium acetate or aqueous ammonia plays a role both as a catalyst and as a nitrogen source. 2,4,6-triaryl-3,3,5,5-tetracyanopiperidines were obtained as a side products in the reactions with nitro-substituted aldehydes or with ethyl and n-propyl cyanoacetates. A series of 14 2-piperidinones and piperidines was assessed for antimicrobial activity against a panel of five bacteria and two fungi; no significant activity was observed. Two side piperidines with nitro substituents in aromatic ring possess bacteriostatic action against S. aureus ATCC 43300 and A. baumannii ATCC 19606 at 32 ug/mL.

Structural data of phenanthrene-9,10-dicarbonitriles.

In this data article, we present the single-crystal XRD data of phenanthrene-9,10-dicarbonitriles. Detailed structure analysis and photophysical properties were discussed in our previous study, "Intermolecular interactions-photophysical properties relationships in phenanthrene-9,10-dicarbonitrile assemblies" (Afanasenko et al., 2020). The data include the intra- and intermolecular bond lengths and angles.

High diastereoselective amine-catalyzed Knoevenagel-Michael-cyclization-ring-opening cascade between aldehydes, 3-arylisoxazol-5(4H)-ones and 3-aminocyclohex-2-en-1-ones.

A highly diastereoselective three-component cascade reaction among aromatic aldehydes, 3-arylisoxazol-5(4H)-ones and 3-aminocyclohex-2-en-1-ones takes place under the catalysis of triethylamine, providing (3SR,4SR)-4-aryl-3-[(E)-(hydroxyimino)(aryl)methyl]-4,6,7,8-tetrahydroquinoline-2,5(1H,3H)-diones in 45-85% yields. The transformation presumably proceeds through a sequential cascade of Knoevenagel/Michael-addition/cyclization/ring-opening reactions. This process was carried out in green media (EtOH/water, 1:1-1:3) at reflux. Products are crystallized directly from the reaction mixture and their isolation includes only filtration. The structure of (3SR,4SR)-3-[(E)-(hydroxyimino)(phenyl)methyl]-7,7-dimethyl-4-phenyl-4,6,7,8-tetrahydroquinoline-2,5(1H,3H)-dione was confirmed by X-ray diffraction analysis.

Catalysis of Cascade and Multicomponent Reactions of Carbonyl Compounds and CH Acids by Electricity.

This review is concerned with modern trends in the use of electrochemically induced chain reactions in cascade and multicomponent electroorganic synthesis. The review summarizes the data on the use of electrochemically induced chain reactions in cascade and multicomponent organic synthesis, which were published mainly in the last decade.