The effect of bioelectric and manual impressions on quality of complete dentures and quality of life: A cross over pilot study.

Purpose: To compare the quality of complete dentures and quality of life of participants rehabilitated by using TENS (Transcutaneous electric nerve stimulation) facilitated impression making with manual impressions. Material and methods: Ten completely edentulous participants were enrolled in the crossover, pilot study. Participants were randomized in 2 groups. Five participants in each group were rehabilitated by dentures fabricated with TENS facilitated definitive impression technique (group T) and conventional impression technique (group C). In group T, Bioelectric border molding was done for the participants, that uses electric stimulation of the nerves supplying the muscles. In group C, incremental border molding using modeling plastic impression compound was carried out. Participants in each group used the dentures for 3 months. After 3 months, OHIP-EDENT questionnaire responses were obtained from the participants to observe the oral health related quality of life. A dental specialist recorded denture quality by Kapur scoring criteria. After one month wash period, the treatment was swapped between the groups. OHIP-EDENT scores and Kapur score were recorded for the alternate dentures after 3 months of use. Descriptive analysis was followed by Mann Whitney test to compare the overall scores between group T and group C for OHIP-EDENT, the scores for individual domains of OHIP-EDENT, and Kapur score for denture evaluation (α = 0.05). Results: The overall OHIP-EDENT scores within each domain were less in group T when compared with the scores in group C and Kapur score for group T was more than group C. The difference was statistically significant i.e. P = 0.002 & 0.003 respectively. Conclusions: Less OHIP-EDENT scores in group T imply better perception of quality of life of individuals due to better performance of stomatognathic system. The higher Kapur scores in group T signifies better quality of dentures when TENS was used for definitive impression making.

Enhanced osseointegration of drug eluting nanotubular dental implants: An in vitro and in vivo study.

Faster and predictable osseointegration is crucial for the success of dental implants, especially in patients with compromised local or systemic conditions. Despite various surface modifications on the commercially available Titanium (Ti) dental implants, the bioactivity of Ti is still low. Thus, to achieve both biological and therapeutic activity on titanium surfaces, surface modification techniques such as titanium nanotubes have been studied as nanotube surfaces can hold therapeutic drugs and molecules. The main aim of the present research work is to study the early osseointegration around the novel Simvastatin drug eluting nanotubular dental implant. In the present research, the titanium nanotubes were fabricated on the screw-shaped dental implant surface and the Simvastatin drug was loaded into the nanotubes using the ultrasonication dip method. In vitro and In vivo studies were carried out on the modified dental implants. In vitro cell culture study reported enhanced osteogenic activity on the drug-loaded nanotube surface implants. The invivo animal studies were evaluated by micro-CT, histopathology, and reverse torque removal analysis methods. The test results showed faster osseointegration with the strong interface on the Simvastatin drug-loaded implant surface at 4 weeks of healing as compared to the control implants.

Comparative Evaluation of Load-Bearing Capacity and Fracture Analysis of PEEK and Zirconia Three-Unit Fixed Dental Prostheses: An In Vitro Study.

PURPOSE: The purpose of this exploratory in vitro study was to compare and evaluate the load-bearing capacity (LBC) of ceramic-veneered zirconia and composite-veneered polyetheretherketone (PEEK) three-unit fixed dental prostheses (FDPs) with and without thermocycling (TC). MATERIALS AND METHODS: The study included 40 samples of three-unit FDPs replacing mandibular first molars. The four groups included were: ceZIR (feldspathic ceramic-layered zirconia), ceZIR TC (feldspathic ceramic-layered thermocycled zirconia), cPEEK (composite-layered PEEK), and cPEEK TC (composite-layered thermocycled PEEK) (n = 10 per group). All frameworks were CAD/CAM milled. Ten PEEK and 10 zirconia samples were subjected to TC (6,000 cycles). All 40 FDP specimens were loaded by applying static load, using a universal testing machine. The maximum load required to fracture the specimens denoted the LBC. The comparison of LBC between the four groups was done by using two-way ANOVA with Tukey's post-hoc analysis (α = .05). RESULTS: There was no statistically significant difference between LBC of cPEEK and ceZIR (P > .001) without thermal aging. LBC values decreased considerably for thermally aged specimens. Statistically significant differences were observed between LBC of cPEEK TC and ceZIR TC (P < .001), cPEEK TC and cPEEK (P < .001), and ceZIR TC and ceZIR (P = .001). On fracture analysis, cPEEK showed delamination failures whereas ceZIR displayed catastrophic connector fractures. CONCLUSION: This comparative evaluation offers preliminary data highlighting substantial depreciation in the LBC of layered PEEK under simulated intraoral conditions, thus raising a question regarding the clinical longevity of layered PEEK multi-unit restorations. In contrast, feldspathic-layered zirconia can be suitable for use in posterior FDPs.

Accuracy of assessing 18, 21, and 25 years of age using Olze et al. stage-based system in an Indian sample of young adults.

BACKGROUND: Recently, Olze et al. came up with a staging system based on the radiological changes in the root pulp of the third molar. AIMS & OBJECTIVES: The current study seeks to ascertain the utility of visibility of the root pulp of the third molar as a system of forensic age estimation in the Indian population, as suggested by Olze. et al. and to assess the accuracy of cut-off stages for 18, 21, and 25 years of age. MATERIAL AND METHODS: Radio-visiogram of 220 Patients (116 males and 104 females) of age 15 to 30 years were examined and staged as per Olze. et al. stage-based system. The statistical methods included descriptive analysis, chi-square test, and Rank-order correlation [rho] test of Spearman. EasyROC web tool was used for ROC analyses and calculating ROC curves (AUCs), likelihood ratio, predictive values, and screening tests for accuracy. Youden's index was used to decide the cut-off stage for the different age groups. RESULTS: Specificity close to 100% was observed among both the Sex for cut-off levels 1, 2, and 3 among 18, 21, and 25 years of age correspondingly with minimal Type II error. Inter andIntraobservations with a kappa value of 0.66 and 0.65, respectively, indicate good agreement. CONCLUSION: Olze's third molar root pulp 1, 2, and 3 stages can be used as an optimal cut-off for the 18, 21, and 25-year-old thresholds correspondingly with high specificity for both the sexes for age estimation among the Indian population.

Evaluation of safety and efficacy of locally developed dental implants: A noninferiority randomized controlled trial.

STATEMENT OF PROBLEM: Various dental implants are available in India, but imported devices are expensive; an affordable locally produced dental implant system would be beneficial. PURPOSE: The purpose of this noninferiority randomized controlled trial was to compare the safety and efficacy of a locally developed dental implant system to those of an established imported dental implant system with similar microsurface characteristics. MATERIAL AND METHODS: A total of 136 participants with 201 partially edentulous sites, aged 18 to 65 years, were enrolled in the trial, with 134 sites receiving test implants and 67 sites control implants (n ratio, 2:1). The implants received a delayed submerged healing protocol and were loaded 3 to 6 months after surgery. Maximum insertion torque (IT) was recorded during the implant surgery, and the implant stability quotient (ISQ) was evaluated on the day of surgery and at the second-stage procedure. The mean crestal bone loss (MCBL) was measured on periapical radiographs at prosthetic placement (baseline) and at 6 months and 12 months after loading. The primary measure of outcome was the implant survival rate, and the secondary measure of evaluation was the intergroup difference in MCBL at baseline, 6 months, and 12 months. RESULTS: A total of 127 test and 61 control implant sites were available for follow-up 1 year after prosthesis placement. At the end of 12 months, the test and control implant groups demonstrated a survival rate of 97% and 100%, respectively. The MCBL difference was significant between the 2 groups at baseline (P<.05). However, at 6 and 12 months, the difference between the test and control groups was not significantly different (P>.05). CONCLUSIONS: The survival rate of the test group fell within the previously assumed 10% noninferiority margin. Therefore, the null hypothesis was accepted for the trial, and the locally developed implants were noninferior to the imported implants at a sample allocation ratio of 2:1.

Development of decellularized aortic scaffold for regenerative medicine using Sapindus mukorossi fruit pericarp extract.

The aim of this study is to develop a novel decellularization method using aqueous extract of soap nut pericarp (SPE) and its evaluation using hematoxylin-eosin staining, scanning electron microscopy, diamidino-2-phenylindol (DAPI) staining, mechanical testing, sodium dodecyl sulfate polyacrylamide gel electrophoresis and DNA quantification. The presently available decellularization agent raises some concerns due to the potential for presence of residual cytotoxic agents in the extracellular matrix. Histological analysis of hematoxylin and eosin and masson's trichrome stained processed aortic samples shows complete decellularization with preservation of extracellular matrix microarchitecture at 120 h. Further, staining of tissue samples with DAPI demonstrates complete removal of DNA fragments. Quantitative evaluation of DNA in the decellularized aorta tissues demonstrated a significant (P < 0.01) decrease in DNA content as compared to native tissues. Collagen quantification assay indicate no significant (P> 0.05) difference in its content between native and decellularized caprine aorta. Tensile strength of the decellularized scaffolds decreased non-significantly (P > 0.05) when compared to native tissues. There was no significant (P > 0.05) difference in young's modulus of elasticity, stiffness and stretch ratio between native aortic tissues and decellularized aortic scaffolds. Histological and scanning electron microscopic examination of in vitro cultured scaffold demonstrated the cell viability and proliferation of primary chicken embryo fibroblasts. SPE treatment is thus capable of producing cytocompatible decellularized caprine aorta scaffold with preservation of extracellular matrix architecture for vascular tissue engineering and could be applied widely as one of the decellularization agent.

Cranioplast fabrication in a comatose patient: A clinical report.

Cranioplasty may be necessary after decompressive craniectomies to aid in the restoration of the esthetic, morphological, functional, and psychosocial stability of those affected. This clinical report describes the management of a comatose road traffic accident victim with a history of autogenous cranial implant failure after decompressive craniectomy. The challenges posed by the nonambulatory state of the patient and his inability to follow commands were overcome by using reverse engineering and rapid prototyping to fabricate a 3D patient-specific polymethylmethacrylate cranial implant. A digital evaluation technique with grids as measuring tools was successfully implemented in the patient's absence. The use of a custom clamp flask aided in the accommodation and subsequent investing, dewaxing, and polymerization of the carved cranial wax pattern. As a result, a custom cranioplast with optimum marginal fit, acceptable contour, adequate thickness, and reduced surgical duration of placement was obtained through a successful combination of conventional and digital techniques.

Role and influence of growth factors on early osseointegration in animal jaw bone: A meta-analysis.

AIM: Growth factors (GFs) are polypeptides, which are intricately involved in the regulation of bone formation, preservation, and regeneration through gene expression. However, the role of these bioactive agents in osseointegration of dental implants has not been substantially proven. The objective of this systematic review (SR) and meta-analysis was to explore the effect of GFs on early osseointegration of dental implants in animal jaws. An attempt to decipher an adjunctive role of GFs in modulating predictable bone growth in peri-implant areas was done. MATERIALS AND METHODS: An electronic and manual search of different databases was performed. Only randomized controlled trials (RCTs) were included and reviewed. The risk of bias (ROB) of the selected studies was assessed using the SR Centre for Laboratory Animal Experimentation (Cochrane) tool. A meta-analysis was also performed to evaluate the different study characteristics quantitatively. STATISTICAL ANALYSIS USED: The total Weighted mean difference was evaluated using the Rev-Manv5.3 algorithm. Chi-square test and I2 test were done to assess the heterogeneity between the studies. RESULTS: Seven RCTs were included in the study. These were associated with a high ROB. The total weighted mean difference (WMD) of the percentage of bone-implant contact was 3.25% (95% confidence interval [CI] = 1.49%-6.03%; P = 0.001; I2 = 91%) between groups with and without exogenous application of GFs. The total WMD of the percentage of newly formed bone area was 4.48% (95% CI = 2.31%-5.90%; P < 0.00001, I2 = 84%). A high level of heterogeneity (P < 0.001 for Chi-square test; I 2>50 %) among comparable studies was observed. CONCLUSION: The ancillary application of external GFs exhibited evidence of early osseointegration, resulting in more predictable and faster results. However, a careful discernment of conclusions drawn from this SR is a must before conducting any human trials.

Comparative evaluation of the effectiveness of ultrasonic tips versus the Terauchi file retrieval kit for the removal of separated endodontic instruments.

OBJECTIVE: The aim of this study was to perform a comparative evaluation of the effectiveness of ultrasonic tips versus the Terauchi file retrieval kit (TFRK) for the removal of broken endodontic instruments. MATERIALS AND METHODS: A total of 80 extracted human first mandibular molars with moderate root canal curvature were selected. Following access cavity preparation canal patency was established with a size 10/15 K-file in the mesiobuccal canals of all teeth. The teeth were divided into 2 groups of 40 teeth each: the P group (ProUltra tips) and the T group (TFRK). Each group was further subdivided into 2 smaller groups of 20 teeth each according to whether ProTaper F1 rotary instruments were fractured in either the coronal third (C constituting the PC and TC groups) or the middle third (M constituting the PM and TM groups). Instrument retrieval was performed using either ProUltra tips or the TFRK. RESULTS: The overall success rate at removing the separated instrument was 90% in group P and 95% in group T (p > 0.05) The mean time for instrument removal was higher with the ultrasonic tips than with the TFRK (p > 0.05). CONCLUSION: Both systems are acceptable clinical tools for instrument retrieval but the loop device in the TFRK requires slightly more dexterity than is needed for the ProUltra tips.

Low-level laser therapy for management of large periapical lesions associated with open apex cases.

CONTEXT: Low-level laser therapy (LLLT) is an established method to accelerate wound healing through the phenomenon of biostimulation. AIMS: This case study presents a novel approach for management of open apex cases associated with large peripapical lesions using 980-nm diode laser for biostimulation. SETTINGS AND DESIGN: Case report. MATERIALS AND METHODS: Two patients presenting with open apex associated with periapical lesion were selected. After access opening, canal disinfection was carried out with sodium hypochlorite and 980-nm diode laser. Calcium hydroxide was given as intracanal medicament for 1 week. When patient was asymptomatic, apical plug of 4-5 mm MTA was placed. In addition, seven sessions of LLLT were administered transcutaneously around the apices of involved teeth every alternate day for 15 days. RESULTS: One year follow-up radiograph revealed remarkable healing of the lesion. CONCLUSION: The combination of increased cellular proliferation with laser biostimulation and meticulous canal disinfection with lasers has the potential of accelerating healing of the periapical lesions.

Assessment of knowledge and awareness about biomedical waste management among health care personnel in a tertiary care dental facility in Delhi.

AIM: The study was conducted to assess knowledge and awareness of biomedical waste management (BMWM) among undergraduate students, residents, and nursing staff in a tertiary care dental facility in Delhi. MATERIALS AND METHODS: A questionnaire survey (using ten close ended questions) was conducted regarding various aspects of BMWM among undergraduate students, residents, and nursing staff in a tertiary care dental facility. In each group, scores were determined depending upon the correct responses, the participants marked. The data were compiled and subjected to statistical analysis. RESULTS: Only 33.3% undergraduate students gave over 70% correct answers as compared to nursing staff (100%) and residents (62.2%). Undergraduate students showed various lacunae in terms of knowledge regarding BMWM. The difference between the knowledge of the 3 groups i.e., nursing staff, residents, and undergraduate students was statistically significant (P = 0.001). Residents exhibited better awareness regarding BMWM as compared to undergraduate students (P = 0.003). CONCLUSION: The pertinence of the issue of BMWM and lack of adequate preparation of the trainee dentists at undergraduate level reflects the urgent need to fill the lacunae in the dental undergraduate curriculum.

Assessment of Treatment Outcome of Presurgical Nasoalveolar Molding in Patients With Cleft Lip and Palate and Its Postsurgical Stability.

OBJECTIVE: To analyze the effects of presurgical nasoalveolar molding (PNAM) in newborns with cleft lip and palate and evaluate its postsurgical stability at 1-year follow-up using a nasal stent. DESIGN: Prospective clinical trial. SETTING: Department of Orthodontics, Maulana Azad Institute of Dental Sciences, Delhi. PATIENTS: Patients with cleft lip and palate of 0 to 6 months. Sample size 25 recruited, 16 satisfactorily completed the procedure. INTERVENTIONS: Presurgical nasoalveolar molding done as indicated in all the patients. Postsurgical external nasal stents were given for 1 year to maintain the nasal correction. MAIN OUTCOME MEASURES: Changes in cleft defect and maxillary arch were recorded pre- and post-PNAM. Changes in nasal morphological parameters assessed pre- and post-PNAM and 1 year after surgical repair following the use of nasal stent. RESULTS: There was a significant reduction in cleft defect assessed both intraorally ( 4.16 mm) and extra orally ( 4.42 mm) at the end of PNAM therapy (average treatment time 4 months). The nasal morphology improved with an increase in columella height (1.5 mm) and reduction in columella width. Bialar width reduced (2.90 mm) with an increase in nostril height ( 2.10 mm). Better symmetry was achieved in all cases as the nostril height and width difference changed significantly pre- and post-nasoalveolar molding. The percentage increase in columella height was greater for infants less than 6 weeks. CONCLUSIONS: Presurgical nasoalveolar molding considerably reduces the cleft gap and improves arch form making surgical union easier along with improved nasal morphology which can be maintained at 1-year postsurgery by use of a postsurgical external nasal stent.

Pycnodysostosis with Osteomyelitis of Maxilla: Case Report of Radiological Analysis.

Pycnodysostosis is an autosomal recessive, rare genetic osteosclerotic disorder that caused by mutation in gene coding for Cathepsin K. The bones in pycnodysostosis are abnormally dense and brittle because of insufficient reabsorption process. This syndrome has a number of characteristic clinical and radiographic signs that differentiate it from other osteosclerotic conditions. This is a rare case report of a male patient with a history of multiple fractures of bones and osteomyelitis of maxilla which is a rare entity.

Customization of attachments in tooth supported overdentures: Three clinical reports.

In elderly patients with few remaining teeth, overdenture is a good treatment option. Roots beneath the denture protect the alveolar ridge, offer proprioception and improve retention, stability and masticatory efficiency of dentures. Customization of attachments available is a viable alternative for some patients in which prefabricated attachments cannot be placed or in which cost is a factor; to improve the final outcome of the treatment. Due to competitive commercialization, implant treatment has become the norm in current dentistry and the concept of tooth supported overdentures has eclipsed, but with proper case selection, thorough treatment planning and modifications in the denture such as customization of attachments, amalgam stops, cross-linked teeth, and metallic mesh can be applied to prolong the longevity and success of the attachment overdenture prosthesis.

Telescopic overdenture for oral rehabilitation of partially edentulous patient.

A case report describing the rehabilitation of a patient presenting with partially edentulous arches and compromised abutment teeth has been described. The aim of this study was to restore function and esthetics and uplift the psychological status of the patient by fabrication of a fixed removable prosthesis using the existing abutment teeth as telescopic overdenture.

Longitudinal evaluation of the association between Insulin-like growth factor-1, Bone specific alkaline phosphatase and changes in mandibular length.

The aim of the current longitudinal study was to assess the levels of serum Bone-specific alkaline phosphatase (BALP) and serum Insulin like growth factor-1 (IGF-1) in different cervical vertebral maturation index (CVMI) stages and observe their association with the mandibular growth. Blood samples and lateral cephalograms of 63 subjects (age group of 11-17 years) were obtained at two time points, 12 months apart. On the basis of CVMI, all subjects were divided into six groups based on whether the subjects remained in same CVMI stage or transitioned to the next CVMI stage. Annual mandibular length was related with serum BALP and serum IGF-1 levels estimated using ELISA. Serum IGF-1 and BALP attained highest levels at CVMI stage 3 with peak BALP levels observed earlier than IGF-1. Although a positive correlation was determined between IGF-1 and BALP but BALP followed skeletal growth pattern more precisely. Overall IGF-1 and BALP were negatively correlated with mandibular length with notable growth in CVMI groups 3-3 (P < 0.01), 3-4 (P < 0.01), 4-4 (P < 0.001) and 5-5 (P < 0.001). In conclusion, BALP is a potential biomarker for skeletal growth assessment. However, the mandibular growth pattern was independent of changes in IGF-1 and BALP.

Fabrication of a bicomponent hybrid orbital prosthesis.

This clinical report describes the management of the retention of an orbital prosthesis in a patient with uncontrolled diabetes. The patient, who underwent left orbital exenteration subsequent to severe mucormycosis, posed a challenge for implant placement and for use of adhesives as a method of retention because of the high likelihood of reinfection. Inaccessibility to severe anatomic undercuts along with their arbitrary block out would have caused diminished retention. As a result, an orbital prosthesis composed of a digitally produced hollow conformer and traditionally produced silicone prosthesis was provided using 3-dimensional imaging and rapid prototyping, with optimum retention.