NIR-vis-UV Light-Responsive High Stress-Generating Polymer Actuators with a Reduced Creep Rate.

Untethered, light-responsive, high-stress-generating actuators based on widely-used commercial polymers are appealing for applications in soft robotics. However, the construction of actuators that are stable and reversibly responsive to low-intensity ultraviolet, visible, and infrared lights remains challenging. Here, transparent, stress-generating actuators are reported based on ultradrawn, ultrahigh molecular weight polyethylene films. The composite films have different draw ratios (30, 70, and 100) and contain a small amount of graphene in combination with ultraviolet and near-infrared-absorbing dyes. The composite actuators respond rapidly (t0.9 < 0.8 s) to different wavelengths of light (i.e., 780, 455, and 365 nm). A maximum photoinduced stress of 35 MPa is achieved at a draw ratio of 70 under near-infrared light irradiation. The photoinduced stress increases linearly with the light intensity, indicating the transfer of light into thermally induced mechanical contraction. Moreover, the addition of additives lead to a reduction in the plastic creep rate of the drawn films compared to their nonmodified counterparts.

Stimuli-Responsive Shape Changing Commodity Polymer Composites and Bilayers.

Commodity polymers are produced in large volumes, providing robust mechanical properties at relatively low costs. The products made from these commodity polymers typically offer only static functionalities. Over the past decade, however, in the scientific literature, stimuli-responsive additives and/or polymer coatings have been introduced to commodity polymers, yielding composites and bilayers that change shape in response to light, temperature, and/or humidity. These stimuli responsive commodity polymers allow the marketing and sales of these otherwise bulk products as "high-end" smart materials for applications spanning from soft actuators to adaptive textiles. This Spotlight on Applications presents an overview of recent intriguing works on how shape changing commodity polymer composite and bilayer actuators based on polyamide 6, poly(ethylene terephthalate), polyethylene, and polypropylene have been fabricated that respond to environmental stimuli and discusses their potential applications.

Ultra-High Actuation Stress Polymer Actuators as Light-Driven Artificial Muscles.

Remotely addressable actuators are of great interest in fields like microrobotics and smart textiles because of their simplicity, integrity, flexibility, and lightweight. However, most of the existing actuator systems are composed of complex assemblies and/or offer a low response rate. Here, the actuation performance of a light-driven, highly oriented film based on ultra-high molecular weight polyethylene (UHMW-PE), containing a photo-responsive additive, 2-(2H-benzotriazol-2-yl)-4,6-ditertpentylphenol (BZT), is reported. The material exhibits a fast (<1 s) and reversible photo-induced thermal response upon exposure to UV light, which results in an exceptionally high actuation stress (∼70 MPa) at a low strain (<0.1%). The proposed actuation mechanism originates from light absorption by BZT and energy transfer into heat, in combination with the intrinsic high stiffness (∼80 GPa) and a negative thermal expansion (NTE) of the oriented polymer films. This unique set of properties of this actuator, in particular the very high specific actuation stress, compared to existing organic and inorganic actuators, and the remote optical actuation, promises impact in fields related to soft robotics, composites, medical devices, optics, prosthetics, and smart textiles.

Unravelling humidity-gated, temperature responsive bilayer actuators.

By spraying liquid crystal mixtures onto stretched polyamide 6 (PA6) substrates, dual-responsive heat/humidity bilayer actuators are generated. The oriented PA6 guides the self-organization of the liquid crystal monomers into well-aligned, anisotropic liquid crystal networks. The bilayer responds to changes in the environmental relative humidity, resulting in bending of the actuator with the liquid crystal network inside the curvature. In contrast, in conditions of constant high humidity (80%RH), increasing the temperature triggers the liquid crystal network coating to bend the bilayer in the opposing direction. The dual-responsivity to changes in environmental humidity and temperature is examined in detail and discussed theoretically to elucidate the humidity-gated, temperature responsive properties revealing guidelines for fabricating anisotropic bilayer actuators.

Liquid Crystal Networks on Thermoplastics: Reprogrammable Photo-Responsive Actuators.

Arbitrary shape (re)programming is appealing for fabricating untethered shape-morphing photo-actuators with intricate configurations and features. We present re-programmable light-responsive thermoplastic actuators with arbitrary initial shapes through spray-coating of polyethylene terephthalate (PET) with an azobenzene-doped light-responsive liquid crystal network (LCN). The initial geometry of the actuator is controlled by thermally shaping and fixing the thermoplastic PET, allowing arbitrary shapes, including origami-like folds and left- and right-handed helicity within a single sample. The thermally fixed geometries can be reversibly actuated through light exposure, with fast, reversible area-specific actuation such as winding, unwinding and unfolding. By shape re-programming, the same sample can be re-designed and light-actuated again. The strategy presented here demonstrates easy fabrication of mechanically robust, recyclable, photo-responsive actuators with highly tuneable geometries and actuation modes.

Rewritable Optical Patterns in Light-Responsive Ultrahigh Molecular Weight Polyethylene.

Spiropyran is used as a photochromic dye to create colored patterns in highly drawn ultrahigh molecular weight polyethylene (UHMW PE) films. The dye is incorporated in highly crystalline, drawn UHMW PE tapes and fibers and isomerizes to its merocyanine state upon UV light irradiation, resulting in a color change from transparent to purple. The isomerization from merocyanine to spiropyran to erase the color can be simply induced by using heat or a green LED light. The combination of the use of a mask and the reversibility of the isomerization results in colored patterns that can be written, erased, and rewritten using UV light and heat or green LED light.