CO2 cleavage by tantalum/M (M = iridium, osmium) heterobimetallic complexes.

A novel Ta/Os heterobimetallic complex, [Ta(CH2tBu)3(µ-H)3OsCp*], 2, is prepared by protonolysis of Ta(CHtBu)(CH2tBu)3 with Cp*OsH5. Treatment of 2 and its iridium analogue [Ta(CH2tBu)3(µ-H)2IrCp*], 1, with CO2 under mild conditions reveal the efficient cleavage of CO2, driven by the formation of a tantalum oxo species in conjunction with CO transfer to the osmium or iridium fragments, to form Cp*Ir(CO)H2 and Cp*Os(CO)H3, respectively. This bimetallic reactivity diverges from more classical CO2 insertion into metal-X (X = metal, hydride, alkyl) bonds.

π-Bonding of Group 11 Metals to a Tantalum Alkylidyne Alkyl Complex Promotes Unusual Tautomerism to Bis-alkylidene and CO2 to Ketenyl Transformation.

A salt metathesis synthetic strategy is used to access rare tantalum/coinage metal (Cu, Ag, Au) heterobimetallic complexes. Specifically, complex [Li(THF)2][Ta(CtBu)(CH2tBu)3], 1, reacts with (IPr)MCl (M = Cu, Ag, Au, IPr = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) to afford the alkylidyne-bridged species [Ta(CH2tBu)3(µ-CtBu)M(IPr)] 2-M. Interestingly, π-bonding of group 11 metals to the Ta─C moiety promotes a rare alkylidyne alkyl to bis-alkylidene tautomerism, in which compounds 2-M are in equilibrium with [Ta(CHtBu)(CH2tBu)2(µ-CHtBu)M(IPr)] 3-M. This equilibrium was studied in detail using NMR spectroscopy and computational studies. This reveals that the equilibrium position is strongly dependent on the nature of the coinage metal going down the group 11 triad, thus offering a new valuable avenue for controlling this phenomenon. Furthermore, we show that these uncommon bimetallic couples could open attractive opportunities for synergistic reactivity. We notably report an uncommon deoxygenative carbyne transfer to CO2 resulting in rare examples of coinage metal ketenyl species, (tBuCCO)M(IPr), 4-M (M = Cu, Ag, Au). In the case of the Ta/Li analogue 1, the bis(alkylidene) tautomer is not detected, and the reaction with CO2 does not cleanly yield ketenyl species, which highlights the pivotal role played by the coinage metal partner in controlling these unconventional reactions.

Highly Selective and Efficient Perdeuteration of n-Pentane via H/D Exchange Catalyzed by a Silica-Supported Hafnium-Iridium Bimetallic Complex.

A Surface OrganoMetallic Chemistry (SOMC) approach is used to prepare a novel hafnium-iridium catalyst immobilized on silica, HfIr/SiO2, featuring well-defined [≡SiOHf(CH2 tBu)2(µ-H)3IrCp*] surface sites. Unlike the monometallic analogous materials Hf/SiO2 and Ir/SiO2, which promote n-pentane deuterogenolysis through C-C bond scission, we demonstrate that under the same experimental conditions (1 bar D2, 250 °C, 3 h, 0.5 mol %), the heterobimetallic catalyst HfIr/SiO2 is highly efficient and selective for the perdeuteration of alkanes with D2, exemplified on n-pentane, without substantial deuterogenolysis (<2 % at 95 % conversion). Furthermore this HfIr/SiO2 catalyst is robust and can be re-used several times without evidence of decomposition. This represents substantial advance in catalytic H/D isotope exchange (HIE) reactions of C(sp3)-H bonds.

Easy preparation of small crystalline Pd2Sn nanoparticles in solution at room temperature.

We describe here a simple protocol yielding small (<2 nm) crystalline Pd2Sn nanoparticles (NPs) along with Pd homologues for sake of comparison. These NPs were obtained via an organometallic approach using Pd2(dba)3·dba (dba = dibenzylideneacetone) in THF with 2 equivalents of tributyltin hydride under 4 bars of H2 at room temperature. The Pd NP homologues were prepared similarly, using Pd2(dba)3·dba with 2 equivalents of n-octylsilane. These NPs were found to be crystalline and very small with a similar mean size (ca. 1.5 nm). These NPs were finally used as nanocatalysts in solution for a benchmark Suzuki-Miyaura cross-coupling reaction. The Pd2Sn NPs were found to be more active than Pd NPs analogues, exhibiting remarkable performances with Pd loading as low as 13 ppb. This result demonstrates a beneficial effect of tin on palladium in catalysis.

Brucella effectors NyxA and NyxB target SENP3 to modulate the subcellular localisation of nucleolar proteins.

The cell nucleus is a primary target for intracellular bacterial pathogens to counteract immune responses and hijack host signalling pathways to cause disease. Here we identify two Brucella abortus effectors, NyxA and NyxB, that interfere with host protease SENP3, and this facilitates intracellular replication of the pathogen. The translocated Nyx effectors directly interact with SENP3 via a defined acidic patch (identified from the crystal structure of NyxB), preventing nucleolar localisation of SENP3 at late stages of infection. By sequestering SENP3, the effectors promote cytoplasmic accumulation of nucleolar AAA-ATPase NVL and ribosomal protein L5 (RPL5) in effector-enriched structures in the vicinity of replicating bacteria. The shuttling of ribosomal biogenesis-associated nucleolar proteins is inhibited by SENP3 and requires the autophagy-initiation protein Beclin1 and the SUMO-E3 ligase PIAS3. Our results highlight a nucleomodulatory function of two Brucella effectors and reveal that SENP3 is a crucial regulator of the subcellular localisation of nucleolar proteins during Brucella infection, promoting intracellular replication of the pathogen.

Highly dispersed silica-supported iridium and iridium-aluminium catalysts for methane activation prepared via surface organometallic chemistry.

The grafting of an iridium-aluminium precursor onto silica followed by thermal treatment under H2 yields small (<2 nm), narrowly distributed nanoparticles used as catalysts for methane H/D exchange. This Ir-Al/SiO2 catalyst demonstrated enhanced catalytic performances in comparison with the monometallic Ir/SiO2 analogue (TOFs of 339 h-1versus 117 h-1 respectively), highlighting the promoting effect of aluminium. TON up to 900 is obtained after 9 hours, without evidence of catalyst deactivation, and identical performances are achieved after air exposure, underlining the good robustness of both Ir-Al/SiO2 and Ir/SiO2 catalytic materials.

Mn2(CO)10 and UV light: a promising combination for regioselective alkene hydrosilylation at low temperature.

The low temperature regioselective hydrosilylation of various alkenes with (1,1,1,3,5,5,5-heptamethyltrisiloxane) MDHM is described using Mn2(CO)10 under UV irradiation with Mn loadings as low as 1 mol%, in the absence of additives and with excellent selectivity and yields. The generation of a manganese radical allowed the anti-Markovnikov hydrosilylation products to be selectively obtained in yields up to 99%.

Strongly Polarized Iridiumδ--Aluminumδ+ Pairs: Unconventional Reactivity Patterns Including CO2 Cooperative Reductive Cleavage.

The iridium tetrahydride complex Cp*IrH4 reacts with a range of isobutylaluminum derivatives of general formula Al(iBu)x(OAr)3-x (x = 1, 2) to give the unusual iridium aluminum species [Cp*IrH3Al(iBu)(OAr)] (1) via a reductive elimination route. The Lewis acidity of the Al atom in complex 1 is confirmed by the coordination of pyridine, leading to the adduct [Cp*IrH3Al(iBu)(OAr)(Py)] (2). Spectroscopic, crystallographic, and computational data support the description of these heterobimetallic complexes 1 and 2 as featuring strongly polarized Al(III)δ+-Ir(III)δ- interactions. Reactivity studies demonstrate that the binding of a Lewis base to Al does not quench the reactivity of the Ir-Al motif and that both species 1 and 2 promote the cooperative reductive cleavage of a range of heteroallenes. Specifically, complex 2 promotes the decarbonylation of CO2 and AdNCO, leading to CO (trapped as Cp*IrH2(CO)) and the alkylaluminum oxo ([(iBu)(OAr)Al(Py)]2(µ-O) (3)) and ureate ({Al(OAr)(iBu)[κ2-(N,O)AdNC(O)NHAd]} (4)) species, respectively. The bridged amidinate species Cp*IrH2(µ-CyNC(H)NCy)Al(iBu)(OAr) (5) is formed in the reaction of 2 with dicyclohexylcarbodiimine. Mechanistic investigations via DFT support cooperative heterobimetallic bond activation processes.

Low Levels of Fecal Calprotectin 3 Months After Surgery Predict Subsequent Endoscopic Postoperative Remission in Crohn's Disease.

BACKGROUND/AIMS: In Crohn's disease (CD) few data are available on the usefulness of monitoring fecal calprotectin (FC) in the early postoperative setting. We assessed prospectively the accuracy of FC measured 3 months after surgery to predict the risk of endoscopic postoperative recurrence (POR) within 1 year after resection. METHODS: In 55 consecutive CD patients who had undergone ileocolonic resection samples were collected 3 months after surgery for measuring serum CRP and FC. Endoscopic POR was assessed by ileocolonoscopy within 6-12 months (median 7 months). Receiver operating characteristic (ROC) curves were generated to assess accuracy of the markers, to determine the best threshold and to calculate sensitivity, specificity, positive and negative predictive values. RESULTS: In contrast with median CRP levels, median FC concentrations measured 3 months after surgery were significantly higher in patients who later experienced endoscopic POR (Rutgeerts ≥ i2) compared with those who stayed in endoscopic remission within the following 6-12 months (205 µg/g IQR [106-721] vs. 103 µg/g IQR [60-219], p = 0.008). Area under the ROC curve for FC was 0.71. The best cutoff value of FC to identify patients in subsequent endoscopic remission 3 months after surgery was 65 µg/g (96% sensitivity, 31% specificity, 50% positive and 91% negative predictive values). In multivariate analysis, FC < 65 µg/g at 3 months was the only factor associated with subsequent endoscopic remission. CONCLUSION: FC measured 3 months after surgery below 65 µg/g is an accurate marker to identify CD patients who will later stay in endoscopic remission within 1 year after resection.

Unexpected reactivity related to support effects during xylose hydrogenation over ruthenium catalysts.

Xylose is a major component of hemicelluloses. In this paper, its hydrogenation to xylitol in aqueous medium was investigated with two Ru/TiO2 catalysts prepared with two commercial TiO2 supports. A strong impact of the support on catalytic performance was evidenced. Ru/TiO2-R led to fast and selective conversion of xylose (100% conversion in 2 h at 120 °C with 99% selectivity) whereas Ru/TiO2-A gave a slower and much less selective transformation (58% conversion in 4 h at 120 °C with 17% selectivity) with the formation of several by-products. Detailed characterization of the catalysts with ICP, XRD, FTIR, TEM, H2 chemisorption, N2 porosimetry, TPR and acid-base titration was performed to elucidate the role of each support. TiO2-R has a small specific surface area with large ruthenium nanoparticles in weak interaction with the TiO2 support and no acidity, whereas TiO2-A is a mesoporous material with a large specific surface area that is mildly acidic, and bears small ruthenium particles in strong interaction with the TiO2 support. The former was very active and selective for xylose hydrogenation to xylitol whereas the latter was less active and poorly selective. Moreover, careful analysis of the reaction products also revealed that anatase TiO2 can catalyze undesired side-reactions such as xylose isomerisation to various pentoses, and therefore the corresponding unexpected polyols (arabitol, ribitol) were produced during xylose conversion by hydrogenation. In a first kinetic approach, a simplified kinetic model was built to compare quantitatively intrinsic reaction rates of both catalysts. The kinetic constant for hydrogenation was 20 times higher for Ru/TiO2-R at 120 °C.

Developing a Highly Active Catalytic System Based on Cobalt Nanoparticles for Terminal and Internal Alkene Hydrosilylation.

This work describes the development of easy-to-prepare cobalt nanoparticles (NPs) in solution as promising alternative catalysts for alkene hydrosilylation with the industrially relevant tertiary silane 1,1,1,3,5,5,5-heptamethyltrisiloxane (MDHM). The Co NPs demonstrated high activity when used at 30 °C for 3.5-7 h in toluene, with catalyst loadings 0.05-0.2 mol %, without additives. Under these mild conditions, a set of terminal alkenes were found to react with MDHM, yielding exclusively the anti-Markovnikov product in up to 99% yields. Additionally, we demonstrated the possibility of using UV irradiation to further activate these cobalt NPs not only to enhance their catalytic performances but also to promote tandem isomerization-hydrosilylation reactions using internal alkenes, among them unsaturated fatty ester (methyl oleate), to produce linear products in up to quantitative yields.

Femoral Arterial Thrombosis in a Young Adult after Nonsevere COVID-19.

INTRODUCTION: Few cases of arterial thromboembolisms have been reported after novel coronavirus disease 2019 (COVID-19) in case of severe infection or in elderly patients. We report a case of femoral arterial thrombosis in a young patient after nonsevere infection. CASE DESCRIPTION: A common femoral artery thrombosis extended in the first third of superficial and profunda femoral arteries associated with tibial posterior and popliteal artery thrombosis was diagnosed in a 24-year-old man complaining of right lower limb pain for one month. The evolution was good after anticoagulation and antiaggregant treatments and thrombectomy. Etiologic assessment was negative except for nonsevere COVID-19. DISCUSSION: COVID-19 accesses host cells via angiotensin-converting enzyme 2 protein, abundant in the lungs, which is also expressed by endothelial cells and is associated with important inflammatory syndrome and coagulopathy, leading to vascular lesions. Thrombosis prevalence is not fully established and seems to be higher in case of major inflammation and in the intensive care unit (ICU). Arterial thromboembolisms are described in many vascular territories, each time in elderly patients, or in case of severe infection. We described a femoral arterial thrombosis in a young patient with negative etiological assessment except nonsevere COVID-19. Treatment consists in anticoagulation and antiaggregant drugs and thrombectomy. Preventing venous thromboembolism treatment is recommended in case of severe infection or in the ICU, but there is no clear recommendation for arterial thromboembolism prevention. This case should lead us to be very careful of the arterial event risk even if the infection is nonsevere and the patient is young.

Vapor-Phase Infiltration inside a Microporous Porphyrinic Metal-Organic Framework for Postsynthesis Modification.

Vapor-phase infiltration (VPI), a technique derived from atomic layer deposition (ALD) and based on sequential self-limiting chemistry, is used to modify the stable microporous porphyrin-based metal-organic framework (MOF) MIL-173(Zr). VPI is an appealing approach to modifying MOFs by inserting reactants with atomic precision. The microporous nature and chemical stability of MIL-173 enable postsynthesis modification by VPI without MOF degradation even with extremely reactive precursors such as trimethylaluminum (TMA) and diethylzinc (DEZ). VPI proceeds through the diffusion of gaseous organometallic reactants TMA and DEZ inside the microporous framework, where they react with two kinds of chemical sites offered by the porphyrinic linker (phenolic and pyrrolic functions in the porphyrin core), without altering the crystallinity and permanent porosity of the MOF. 27Al NMR, UV-vis absorption, and IR spectroscopies are used to further characterize the modified material. Physisorption of both precursors is computationally simulated by grand canonical Monte Carlo methods and outlines the preferential adsorption sites. The impact of temperature, number of VPI cycles, and pulse length are investigated and show that aluminum and zinc are introduced in a saturating manner inside the MOF on both available reactive sites. The porosity prerequisite is outlined for VPI, which is proven to be much more effective than classical solution-based methods because it is solventless and fast, prevents workup steps, and allows reactions not possible by the classical solution approach.

Evaluation of integrative clustering methods for the analysis of multi-omics data.

Recent advances in sequencing, mass spectrometry and cytometry technologies have enabled researchers to collect large-scale omics data from the same set of biological samples. The joint analysis of multiple omics offers the opportunity to uncover coordinated cellular processes acting across different omic layers. In this work, we present a thorough comparison of a selection of recent integrative clustering approaches, including Bayesian (BCC and MDI) and matrix factorization approaches (iCluster, moCluster, JIVE and iNMF). Based on simulations, the methods were evaluated on their sensitivity and their ability to recover both the correct number of clusters and the simulated clustering at the common and data-specific levels. Standard non-integrative approaches were also included to quantify the added value of integrative methods. For most matrix factorization methods and one Bayesian approach (BCC), the shared and specific structures were successfully recovered with high and moderate accuracy, respectively. An opposite behavior was observed on non-integrative approaches, i.e. high performances on specific structures only. Finally, we applied the methods on the Cancer Genome Atlas breast cancer data set to check whether results based on experimental data were consistent with those obtained in the simulations.

Metal-Metal Synergy in Well-Defined Surface Tantalum-Iridium Heterobimetallic Catalysts for H/D Exchange Reactions.

A novel heterobimetallic tantalum/iridium hydrido complex, [{Ta(CH2tBu)3}{IrH2(Cp*)}] 1, featuring a very short metal-metal bond, has been isolated through an original alkane elimination route from Ta(CHtBu)(CH2tBu)3 and Cp*IrH4. This molecular precursor has been used to synthesize well-defined silica-supported low-coordinate heterobimetallic hydrido species [≡SiOTa(CH2tBu)2{IrH2(Cp*)}], 5, and [≡SiOTa(CH2tBu)H{IrH2(Cp*)}], 6, using a surface organometallic chemistry (SOMC) approach. The SOMC methodology prevents undesired dimerization as encountered in solution and leading to a tetranuclear species [{Ta(CH2tBu)2}(Cp*IrH)]2, 4. This approach therefore allows access to unique low-coordinate species not attainable in solution. These original supported Ta/Ir species exhibit drastically enhanced catalytic performances in H/D exchange reactions with respect to (i) monometallic analogues as well as (ii) homogeneous systems. In particular, material 6 promotes the H/D exchange between fluorobenzene and C6D6 or D2 as deuterium sources with excellent productivity (TON up to 1422; TOF up to 23.3 h-1) under mild conditions (25 °C, sub-atmospheric D2 pressure) without any additives.

Supported Ru olefin metathesis catalysts via a thiolate tether.

Thiolate-coordinated ruthenium alkylidene complexes can give high Z-selectivity and stereoretentivity in olefin metathesis. To investigate their applicability as heterogeneous catalysts, we have successfully developed a methodology to easily immobilize prototype ruthenium alkylidenes onto hybrid mesostructured silica via a thiolate tether. In contrast, the preparation of the corresponding molecular complexes appeared very challenging in solution. These prototype supported complexes contain small thiolates but still, they are slightly more Z-selective than their molecular analogues. These results open the door to more active and selective heterogeneous catalysts by supporting more advanced thiolate Ru-complexes.

l-Arginine-Catalyzed Synthesis of Nanometric Organosilica Particles through a Waterborne Sol-Gel Process and Their Porous Structure Analysis.

We report an efficient and easy-to-implement waterborne sol-gel process for the synthesis of nanometric organosilica particles. In this process, tetraethyl orthosilicate (TEOS) and 3-(methacryloxy)propyl trimethoxy silane (γ-MPS), employed as silica sources, were heterogeneously delivered in an aqueous solution of l-arginine, a basic amino acid used as a catalyst, from a top organic layer. Co-condensation of TEOS with γ-MPS led to the formation of organosilica particles with diameters between 30 and 230 nm when increasing the γ-MPS content from 0 to 10.1 mol % in the silica source. Nitrogen sorption analyses confirmed the microporous nature of the obtained particles after calcination. The Brunauer-Emmett-Teller (BET) surface areas increased from 27 (before calcination) to 684 m2 g-1 (after calcination) for the organosilica particles containing 10.1 mol % of γ-MPS. Fourier transform infrared spectroscopy and 29Si NMR were employed to analyze the chemical structure of the organosilica spheres and provide insight into the mechanism of particle formation. In the second part, hybrid organosilica particles with a core-shell morphology were synthesized through the combination of Pickering emulsion and the sol-gel process. γ-MPS emulsion droplets stabilized by tiny silica particles (formed in a separate step) were first generated and used as seeds to grow a silica shell on their surface through TEOS addition from the top organic layer. Transmission electron microscopy and pore size analyses of the resulting particles after calcination revealed a unique dual-porosity structure with a mesoporous inner core and a micro/mesoporous silica shell with ink-bottle-type pores.

Tailored Microstructured Hyperpolarizing Matrices for Optimal Magnetic Resonance Imaging.

Tailoring the physical features and the porous network architecture of silica-based hyperpolarizing solids containing TEMPO radicals, known as HYPSO (hybrid polarizing solids), enabled unprecedented performance of dissolution dynamic nuclear polarization (d-DNP). High polarization values up to P(1 H)=99 % were reached for samples impregnated with a mixture of H2 O/D2 O and loaded in a 6.7 T polarizer at temperatures around 1.2 K. These HYPSO materials combine the best performance of homogeneous DNP formulations with the advantages of solid polarizing matrices, which provide hyperpolarized solutions free of any-potentially toxic-additives (radicals and glass-forming agents). The hyperpolarized solutions can be expelled from the porous solids, filtered, and rapidly transferred either to a nuclear magnetic resonance (NMR) spectrometer or to a magnetic resonance imaging (MRI) system.