Design of a diamond-based in-vessel soft x-ray detector for the SPARC tokamak.

The in-vessel silicon diode arrays that are used for soft x-ray detection in many tokamaks are sensitive to neutron damage, making them unsuitable for burning plasma devices such as SPARC. In such a device, the silicon diodes would need to be placed far from the plasma-limiting their field of view-or an alternative detector could be used. Here, we present the design of a camera containing an array of chemical vapor deposition single-crystal diamonds, which will be placed in the upper and lower port plugs of the SPARC tokamak with a large enough view of the poloidal cross section to enable tomographic inversion. The camera design presented here is optimized to provide a wide field of view of the poloidal cross section. Simulated plasma conditions are used to estimate the x-ray signal that this detector array will receive and to fine-tune the camera placement within the tokamak.

SPARC x-ray diagnostics: Technical and functional overview.

An overview is given of SPARC's three main x-ray diagnostics, with a focus on the functions they fulfill with respect to tokamak operation. The first is an in-vessel soft x-ray tomography diagnostic, aimed at providing early campaign information on plasma position, MHD activity, and impurity content. The second is an ex-vessel set of hard x-ray scintillators aimed at detecting the presence of runaway electrons, in particular during plasma startup phases. The third is a set of x-ray Bragg spectrometers, located outside of the tokamak hall, aimed at informing on the ion temperature as an indirect constraint to reduce uncertainties on the fusion power, on providing plasma rotation velocity estimates, and on observing impurity emission. Finally, more technical details are given on the beamlines at the end of which the spectrometers are located. It explains how their design allows us to ensure tritium containment and limit neutron radiation while providing a straight view into the plasma that can also be used for testing new innovative sensors.

Development of the prototype for the SPARC hard X-ray monitor.

The SPARC tokamak will be equipped with a hard X-ray (HXR) monitor system capable of measuring the bremsstrahlung emission from runaway electrons with photon energies in excess of about 100 keV. This diagnostic will detect the formation of runaway electron beams during plasma start-up and inform the plasma control system to terminate the discharge early to protect the machine. In this work, we present a 0D estimate of the HXR emission in SPARC during plasma start-up. Then we discuss the characterization of a prototype of the HXR monitor. The detector mounts a 1 × 1-in.2 LaBr3 inorganic scintillator coupled with a photomultiplier tube and has been tested with γ-ray sources to find its dynamic range. Finally, two possible modes of operation for spectroscopic and current mode measurements on SPARC are proposed.

Performance predictions of the SPARC x-ray crystal spectrometers for ion temperature and toroidal rotation measurements.

SPARC will be outfitted with three systems of x-ray crystal spectrometer arrays. Two of these are designed using cylindrically bent crystals to achieve high spectral-resolution for ion temperature and toroidal velocity measurements via imaging He-like Kr and Ne-like Xe. The last acts as a spectral survey system to monitor Ne-like W and nearby H- and He-like emission from Cr, Fe, Co, Ni, and Cu. Line radiation intensities are calculated using the Flexible Atomic Code for atomic data and ColRadPy for collisional-radiative modeling, then convoluted with a Voigt line shape. Free-free, free-bound, and two-photon continuum radiation is also included. The ToFu code is used to perform volume-of-sight integration to produce synthetic detector images. In addition, presented is cross-validation performed using the XICSRT Monte Carlo ray-tracing code. Ion temperature and toroidal velocity profiles are reconstructed using ToFu via tomographic inversion.

Electron and ion temperature measurement with a new x-ray imaging crystal spectrometer on WEST.

A new x-ray imaging crystal spectrometer (XICS) has been installed, aligned, and used during experimental campaigns on the WEST tokamak. It has three interchangeable crystals for measuring the Ar XVII, Ar XVIII, and Fe XXV spectra, respectively. A patented rotating table holding the crystals is used to monitor the crystal facing the plasma remotely and without changing the position of the camera. Here, the focus is made on the Ar XVII spectrum, between 3.93 and 4.00 Å. The design of the diagnostic is presented, and a synthetic diagnostic, implemented with the Python library ToFu, is used to show the instrument's operational performance and limits. The instrument function exhibits the following two main features: a distortion for the Ar XVII spectrum, presumably due to the crystal manufacturing in two parts, and the measurement of three W spectral lines on the Ar XVI spectrum. Line of sight-integrated profiles of the electron and ion temperatures are thus extracted from the Ar XVII spectrum from two distinct spectral line ratios and from the Doppler broadening, respectively. The bremsstrahlung emission and the W line measurements are the two main limitations to compute the electron temperature. Tomographic inversions are also implemented with the library ToFu and used in order to obtain the local electron and ion temperature profiles, which are compared to other measurements from the WEST ECE (electron cyclotron emission) diagnostic. It is shown that both the XICS line-integrated and ECE Te measurements are in better agreement. Systematic differences are shown between the electron temperature profiles calculated from the two available line ratios.

Gaseous electron multiplier-based soft x-ray plasma diagnostics development: Preliminary tests at ASDEX Upgrade.

A Gaseous Electron Multiplier (GEM)-based detector is being developed for soft X-ray diagnostics on tokamaks. Its main goal is to facilitate transport studies of impurities like tungsten. Such studies are very relevant to ITER, where the excessive accumulation of impurities in the plasma core should be avoided. This contribution provides details of the preliminary tests at ASDEX Upgrade (AUG) with a focus on the most important aspects for detector operation in harsh radiation environment. It was shown that both spatially and spectrally resolved data could be collected, in a reasonable agreement with other AUG diagnostics. Contributions to the GEM signal include also hard X-rays, gammas, and neutrons. First simulations of the effect of high-energy photons have helped understanding these contributions.

Soft x-ray tomography for real-time applications: present status at Tore Supra and possible future developments.

This paper is focused on the soft x-ray (SXR) tomography system setup at Tore Supra (DTOMOX) and the recent developments made to automatically get precise information about plasma features from inverted data. The first part describes the main aspects of the tomographic inversion optimization process. Several observations are made using this new tool and a set of shape factors is defined to help characterizing the emissivity field in a real-time perspective. The second part presents a detailed off-line analysis comparing the positions of the magnetic axis obtained from a magnetic equilibrium solver, and the maximum of the reconstructed emissivity field for ohmic and heated pulses. A systematic discrepancy of about 5 cm is found in both cases and it is shown that this discrepancy increases during sawtooth crashes. Finally, evidence of radially localized tungsten accumulation with an in-out asymmetry during a lower hybrid current drive pulse is provided to illustrate the DTOMOX capabilities for a precise observation of local phenomena.